CRXC-D0T12H [BEL]
DC-DC Regulated Power Supply Module, ROHS COMPLIANT, MODULE 14 PIN;型号: | CRXC-D0T12H |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, ROHS COMPLIANT, MODULE 14 PIN |
文件: | 总13页 (文件大小:353K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Features
•
•
•
•
Input Under Voltage Lockout
Input Over Voltage Lockout
Output Over-Voltage Protection
OCP/SCP
•
•
•
•
•
•
Isolated
Fixed Frequency(300KHz)
High Efficiency
Over Temperature Protection
Class 1, Category 2, Isolated DC/DC Converter (refer to IPC-9592)
UL60950-1,-2 2nd Edition Recognized (UL/cUL) (Pending)
Applications
•
•
•
Networking
Computers and peripherals
Telecommunications
Description
The CRXC-D0T12H is an isolated dc/dc converter that operates from a nominal 48 Vdc source. This unit will
provide up to 204 W of output power from a nominal 48 Vdc input. This unit is designed to be highly efficient.
Features include over current protection, overvoltage protection and input under-voltage lockout.
Part Selection
Output Voltage
Input Voltage
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Model Number
12 Vdc
36 Vdc - 75 Vdc
17 A
204 W
90%
CRXC-D0T12H
Note: Add “G” suffix at the end of the model number to indicate Tray Packaging.
Part Number Explanation
C R XC – D0 T 12 H
1 2
3
4
5
6
7
1---Case
2---RoHS 6, change “R” to “7” means RoHS 5
3---Series name
4---Series code
5--- Input range (36-75V), normal 48V
6---Output voltage (12V)
7---Suffix
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
1
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Absolute Maximum Ratings
Unit
Parameter
Min
Typ
Max
Notes
Continuous non-operating Input
Voltage
-0.5
-
80
V
Input Transient Voltage
Isolation Voltage
-
-
-
-
100
V
V
100mS maximum
Input to earth
2150
Ambient Temperature1
-40
-45
-
-
72
85
°C
°C
Storage Temperature
Notes: 1. Iout from 0A to 17A with 2 meters per second airflow.
2. Ratings used beyond the maximum ratings may cause a reliability degradation of the converter or may
permanently damage the device.
Input Specifications
Parameter
Min
Typ
Max
Unit
Notes
Operating Input Voltage
Input Current (full load)
Input Current (no load)
36
-
75
V
-
-
-
6.3
A
200
mA
Vin=48V
With simulated source impedance
of 12uH, 5Hz to 20MHz. Use a
47uF/100V electrolytic capacitor
with ESR=1 ohm max, at
Input Reflected Ripple Current
(rms)
-
-
-
-
20
mA
mA
Input Reflected Ripple Current
(pk-pk)
100
200KHz@25°C.
Inrush Current with 36V input
I2t Inrush Current Transient
Hold up time
-
-
-
-
-
A
A2s
ms
V
According to ETS 300 132-2
According to ETS 300 132-2
Vin=48V,Io=17A
-
2
-
-
Under-voltage Turn on Threshold
Under-voltage Turn off Threshold
Over-voltage Shutdown Threshold
Over-voltage Recovery Threshold
Input Voltage Monitoring Function
33
32
76.5
73.5
34
33
78
75
35
34
79.5
76.5
Lockout turn on
V
Lockout turn off, non-latching
Auto-recovery and non-latching
V
V
With I2C communication
Notes: 1. All protection features are non-latching with auto-restart when fault is removed.
2. All specifications are typical at 25 °C unless otherwise stated.
Output Specifications
Parameter
Min
Typ
Max
Unit
Notes
Output Voltage Set Point
11.4
12.0
12.6
V
Io=17A
Load Regulation
Line Regulation
-
-
-
-
±5
±5
%Vout
%Vout
Regulation Over Temperature
(-40deg.C-85deg.C)
-
-
-
-
-
-
±5
150
70
%Vout
mV
Ripple and Noise (pk-pk)
Ripple and Noise (rms)
40-100MHz BW, with 0.1µF
ceramic capacitor and 3000uF bulk
electrolytic at output.
mV
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
2
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Output Specifications (continued)
Parameter
Min
Typ
Max
Unit
Notes
Output Current Range
1
-
17
A
Output DC Current Limit
Rise time
18.7
5
20
12
22.1
15
A
Enter a hiccup mode, non-latching.
mS
Vin=48V, Io=17A, with 3000uF bulk
electrolytic at output.
Turn on Time
-
-
500
mS
Overshoot at Turn on
Undershoot at Turn on
Output Capacitance
Transient Response
-
-
0
0
-
3
3
%
%
0
3000
uF
Overshoot
-
-
-
-
-
5
%Vout
uS
Min load to
Max Load
Settling Time
Overshoot
-
-
-
500
5
Vo=
12V
di/dt=1A/us, with 3000uF bulk
electrolytic at output.
%Vout
uS
Max load to
Min Load
Settling Time
500
Notes: 1. All protection features are non-latching with auto-restart when fault is removed.
2. All specifications are typical at nominal input, full load at 25°C unless otherwise stated.
General Specifications
Parameter
Min
Typ
Max
Unit
Notes
Efficiency
-
90
-
%
150 LFM airflow across the long axis
Switching Frequency
Over Temperature Protection
Over Voltage Protection
Weight
-
-
-
-
300
110
-
-
-
kHz
℃
V
16
-
Enter a hiccup mode, non-latching
178
g
Calculated Per Bell Core SR-332
(Vin=48 V, Vo=12 V, Io=17A, Ta =
25C, FIT=109/MTBF)
FIT
226
-
-
Dimensions
Inches (L × W × H)
Millimeters (L × W × H)
6.00 x 3.00 x 1.142
152.40 x 76.20 x 29.01
Isolation characteristics
Isolation Resistance
Isolation Capacitance
10M
-
-
-
ohm
nF
-
16
Note: All specifications are typical at 25 °C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
3
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Efficiency Data
95.00%
90.00%
85.00%
80.00%
75.00%
70.00%
36 V
48 V
75 V
1.7A
4.25A
8.5A
12.75A
17A
OUTPUT CURRENT(A)
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
4
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Thermal Derating Curve
Derating curve under normal input
Vin=48V, with maximum junction temperature of semiconductors derated to 120C
Temperature reference points on bottom side
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
5
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Ripple and Noise Waveform
Note: Ripple and noise at full load, 48Vdc input, 12Voutput and Ta=25 deg C.
Transient Response Waveforms
1A~17A load step
17A~1A load step
Note: Transient Response at Vin=48V, Vo=12V, di/dt=1A/uS, with 3000uF output cap.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
6
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Startup & Shutdown
Startup time
Startup from Vin
Ch1: Vo
Ch3: Vin
Vin=48V,Vo=12,full load with 3000uF output cap
Shutdown
Vin=48V,Vo=12V,full load with 3000uF output cap
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
7
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Over Current Protection
To provide protection in a fault output overload condition, the module is equipped with internal current-limiting
circuitry and can endure current limiting for a few mili-seconds. If the over current condition persists beyond a few
milliseconds, the module will shut down into hiccup mode and restart once every 800mS. The module operates
normally when the output current goes into specified range. The typical average output current is 1.2A during
hiccup.
Vin=48V,Vo=12V,Rout=0.071Ohm
Input Under-voltage Lockout
Under-voltage Lockout
Voltage Falling
V1=33V
V2=34V
Voltage Rising
Input Voltage (V)
V1
V2
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
8
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Safety & EMC
Safety
1. Material flammability UL94V-0
2. TUV Certification
3. UL Certification
EN60950-1
UL60950-1
EMC
1. ESD
EN61000-4-2,Level 4
2. Electromagnetic Field
EN61000-4-3 Level 3
EN61000-4-4,Level 2/Level3
EN61000-4-3 Level 3
EN61000-4-5,Level 3
3. Electrical Fast Transient / Burst
4. RF Immunity on DC power input
5. Surge Immunity
4.EMI
Radiated Emissions CISPR22/EN55022 and FCC47 part 15: Class B limit
Conducted Emissions CISPR22/EN55022 and FCC47 part 15: Class B limit
Conducted EMI
Vin=48V,Vo=12V,Io=17A and Ta=25 deg C
Positive
Negative
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
9
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Layout
Layout of components on top side
Layout of components on bottom side
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
10
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Mechanical Outline
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
11
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Mechanical Outline(continued)
I2C Connector (Molex: 50-36-2286)
Pin
1
Function
3.3V
Output
Connector
Input
Connector
2
CLOCK
DATA
3
I2C
Connector
Input DC Connector (Molex: 26-48-1065)
Output DC connector (Molex: 44472-1455)
Pin
1
Function
12V
Pin
8
Function
GND
Pin
1
Function
-48V BAT B
2
12V
9
GND
2
3
12V
10
11
12
13
14
GND
3
-48V BAT A
4
12V
GND
4
5
12V
GND
5
RTN B
RTN A
6
12V
GND
6
7
12V
GND
Notes:
1) Undimensioned components are shown for visual reference only.
2) All dimensions in inches (mm); Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm).
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
12
ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input,
12 Vdc/17 A Output
Dec. 03, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Revision History
Date
Revision
Changes Detail
Approval
YF SUN
YF SUN
2010-11-11
2010-12-03
PA
PB
First release
Add thermal hot-spot picture in TD
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and
other hazardous substances from electronic products.
©2010 Bel Fuse Inc. Specifications subject to change without notice. 120310
13
CORPORATE
FAR EAST
EUROPE
Bel Fuse Inc.
Bel Fuse Ltd.
Bel Fuse Europe Ltd.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
8F/ 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
相关型号:
©2020 ICPDF网 联系我们和版权申明