首页 |元器件品牌

FES100ZD-A91H [BEL]

DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid;
FES100ZD-A91H
型号： FES100ZD-A91H
厂家： BEL FUSE INC.    BEL FUSE INC.
描述：

DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
文件： 总3页 (文件大小：81K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
FES DC-DC Series Data Sheet  
Single-Output, 300 Watts  
Features  
• 60A “full-brick”  
• Very high efficiency  
• Open-frame packaging  
• 100°C baseplate operation  
• Planar magnetics  
• Excellent transient response  
• 1500V isolation  
• Synchronous rectification  
DESCRIPTION  
FES single output DC/DC converters provide up to 300 watts of output power and up to 60 amperes of output current  
in a full-brick package. The FES converters feature open-frame packaging, along with planar magnetics and a high  
efficiency topology, to provide maximum useable power density. The FES converters use 100% surface-mount  
construction and are fully compatible with production board washing processes.  
Technical Specifications  
Input  
Voltage Range  
48 VDC Nominal  
Undervoltage Lockout - Turn on / Turn off  
36 - 75 VDC  
34 / 32 VDC  
Output  
Setpoint Accuracy  
±1%  
Line Regulation V Min. - V Max., I  
Rated  
0.2% V  
0.2% V  
0.5 VDC  
in  
in  
out  
out  
Load Regulation I  
Remote Sense Headroom  
Minimum Output Current  
Min. - I  
Max., V Nom.  
out  
out  
in  
out  
10 % I  
Rated  
25% I  
4% V  
out  
Efficiency vs. Load (48V Input)  
Dynamic Regulation, Loadstep  
Pk Deviation  
Settling Time  
out  
out  
95  
90  
85  
80  
75  
70  
65  
60  
500 µs  
±10%  
Voltage Trim Range  
Current Limit Threshold Range, % of I  
OVP Trip Range  
OVP Type  
Rated  
110 - 140%  
out  
120 - 140% V  
Nom.  
out  
Self Recovering  
Shutdown/Hiccup  
FES200ZE-A  
Short Circuit/Over Current Protection  
EFF. (36V)  
EFF. (48V)  
EFF. (75V)  
General  
Turn-On Time  
Remote Shutdown  
10 ms  
Positive Logic  
Remote Shutdown Reference  
V
Negative  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
in  
LOAD %  
Switching Frequency  
Isolation  
200 or 300 kHz  
Input - Output  
Input - Case  
Output - Case  
1500 VDC  
1050 VDC  
500 VDC  
0.03%/°C  
Notes  
MTBF predictions may vary slightly from model to model.  
Temperature Coefficient  
Case Temperature  
Operating Range  
Storage Range  
Thermal Shutdown Range  
Vibration, 3 Axes, 5 Min Each  
MTBF† (Bellcore TR-NWT-000332)  
Safety  
†
-40 To +100°C  
-40 To +125°C  
105 To 125°C  
5 g, 10 - 55 Hz  
Consult Factory  
UL, cUL, TUV  
4.4 oz  
Specifications typically at 25°C, normal line, and full load, unless otherwise stated.  
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with  
commercial wave-soldering equipment.  
Safety: Agency approvals may vary from model to model. Please consult factory  
for specific model information.  
Weight (Approx.)  
REV. NOV 05, 2003  
Page 1 of 3  
FES DC-DC Series Data Sheet  
Single-Output, 300 Watts  
Model Selection  
INPUT VOLTAGE  
INPUT VOLTAGE  
RANGE (VOLTS)  
MAXIMUM INPUT  
CURRENT (AMPS)*  
OUTPUT  
VOLTAGE (VOLTS)  
RATED OUTPUT  
CURRENT (AMPS)  
RIPPLE & NOISE  
pk-pk (mV)  
TYPICAL  
EFFICIENCY**  
MODEL  
(VOLTS)  
FES100ZD-A  
FES132ZE-A  
FES200ZG-A  
FES150ZD-A  
FES200ZE-A  
FES300ZG-A  
48  
48  
48  
48  
48  
48  
36 - 75  
36 - 75  
36 - 75  
36 - 75  
36 - 75  
36 - 75  
3.5  
4.5  
6.5  
5.0  
7.0  
10.5  
2.5  
3.3  
5.0  
2.5  
3.3  
5.0  
40  
40  
40  
60  
60  
60  
100  
100  
100  
100  
100  
100  
85%  
87%  
80%  
79%  
81%  
84%  
*
Maximum input current at minimum input voltage, maximum rated output power.  
** At nominal V , rated output.  
in  
Mechanical Drawing  
Pin  
Function  
Thermal Impedance  
Tolerances  
(Millimeters)  
1
-V  
in  
Inches:  
.XX ± 0.020  
.XXX ± .010  
Natural Convection  
5.4 °C/W  
3.8 °C/W  
2.5 °C/W  
1.7 °C/W  
1.6 °C/W  
2
3
4
5
6
Case  
Enable  
+V  
.X ± 0.5  
.XX ± 0.25  
100 LFM  
200 LFM  
300 LFM  
400 LFM  
in  
-V  
Pin:  
± 0.002  
out  
± 0.05  
-V  
out  
7
8
9
-Sense  
Trim  
+Sense  
(Dimensions as listed unless otherwise  
specified.)  
Note:  
Thermal impedance data is dependent on  
many environmental factors. The exact  
thermal performance should be validated  
for specific application.  
10  
+V  
out  
11  
+V  
out  
REV. NOV 05, 2003  
Page 2 of 3  
OPTIONS  
This page is offered as a reference. Consult factory for actual availability of options. When ordering  
equipment options, use the following suffix information. Select preferred option(s) and add the suffix to the  
model number. Ordering option examples are located below the options table.  
OPTION  
SUFFIX  
APPLICABLE SERIES  
REMARKS  
Negative Logic  
N
HAS, HBD, HBS, HES, HLS, HLD, LES,  
QBS, QES, QLS, TES, TQD  
TTL "Low" Turns Module ON  
TTL "High" Turns Module OFF  
Lucent-Compatible Trim  
T
HAS, HBD, HBS, HES, HLS, QBS, QES,  
QLS  
Trim  
1
2
3
IAS, LES  
Enable  
IAD, IAS, LES, SMS  
IAS, LES  
Trim and Enable  
Pin Length and Heat Sink Options  
0.110" (2.8mm) Pin Length  
Standard Pin Length is 0.180" (4.6mm)  
8
9
All Leaded Models  
All Leaded Models  
0.150" (3.8mm) Pin Length  
0.24" (6.1mm) Horizontal Heat Sink  
1H  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
0.24" (6.1mm) Vertical Heat Sink  
0.45" (11.4mm) Horizontal Heat Sink  
0.45" (11.4mm) Vertical Heat Sink  
0.95" (24.1mm) Horizontal Heat Sink  
0.95" (24.1mm) Vertical Heat Sink  
1V  
2H  
2V  
3H  
3V  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
Example Options:  
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent-compatible trim, and 0.95” vertical heat sink.  
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.  
QBS066ZG-AT8 = QBS066ZG-A with Lucent-compatible trim and 0.110” pin length.  
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems,  
equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president  
of Power-One, Inc.  
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the  
date manufactured. Specifications are subject to change without notice.  
REV. NOV 05, 2003  
Page 3 of 3  

相关型号：

FES100ZD-A91V

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES100ZD-A92H

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES100ZD-A92V

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES100ZD-A93H

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES100ZD-A93V

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES132ZE-A

 300 WATT
POWER-ONE

FES132ZE-A1H

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES132ZE-A2H

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES132ZE-A2V

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES132ZE-A3H

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES132ZE-A3V

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL

FES132ZE-A81H

 DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid
BEL
©2020 ICPDF网 联系我们和版权申明