GP2540-7RDGTW 概述
暂无描述
GP2540-7RDGTW 数据手册
通过下载GP2540-7RDGTW数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载The Power
DC-DC
of Melcher.
Converters
Power
[W]
Output [V DC]
15 24 36 48
No. of
outputs
Input [V DC]
10 20 60 80 180
Series
3
5
3
Print Mountable
1
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
1, 2
❚❚❚
DSP
1...12
2.4
3
3...15
4
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
1, 2, 3
1
1,2
1, 2, 3
1, 2
1, 2
1, 2
1, 2, 3
1, 2
1, 2
1, 2
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚
IMP
CHS
IXP
IMR
IMX 4
IMO
DFA
DFC
IMS 7
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
6
6...20
6...30
7
7
10
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
IMX 7
IML
10...30
15
15
25
25/40
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
1, 2, 3
1, 2
1, 2
1, 2
1, 2, 3
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
DGP
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚
IMS 15
IMX 15, IMY 15
OBS, OBD
IMR 25, IMR 40
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
Cassette Style
20
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
1
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
SR
H
M
Q
S
50
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
1, 2, 3
1, 2, 3
1, 2
1, 2
1, 2
50
100...150
100
150
K
Open Frame
150
❚❚❚❚❚❚❚❚❚❚❚
3, 4
❚❚❚❚❚❚❚❚❚❚❚
MDU
Bricks
15...60
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚
1
1
1
1
1
1
1
1
1
1
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
HAS
HES
HBS
QES
QBS
QAS
XWS
FES
25...150
33...100
38...66
38...150
50...60
100...190
100...300
100...300
113...225
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚
VWS
TES
Comprehensive data sheets are available from either source:
– Internet: www.melcher.ch
– Melcher CD-ROM
– Melcher Databook
– Nearest sales office by fax or mail.
Edition 6/3.99
MELCHER
The Power Partners.
Industrial Environment
DC-DC Converters >100Watt
P Series
120/180 Watt DC-DC Converters
P Series
Input to output isolation
Single output: 3.3, 5.1 V DC
Double output: 3.3/5.1, 2 × 5.1, 2 × 12, 2 × 15, 2 × 24 V
Triple output: 5.1/ 2 × 12, 5.1/ 2 × 15 V DC
Quadruple output: 5.1/3.3 with 2 × 12,
2 × 24 with 2 × 24 V DC
• Extremely high efficiency
• Flex power: Flexible load distribution
• Excellent surge and transient protection
• 4242 V DC input to output electric strength test
• Redundant operation (n+1), current sharing option
• Extremely low inrush current, hot plug-in
• Externally adjustable output voltage
• Inhibit primary or secondary referenced
• Very compact and fully functional unit (20 mm wide)
111
4.4"
3 U
• Telecoms compatible input voltage range of DP units
according to prETS 300132-2 (40...101 V DC)
164
20
6.5"
0.8"
4 TE
Safety according to IEC/EN 60950, UL 1950
LGA
C
Safety approvals in progress
Summary
of several units, current sharing option is provided by a sin-
gle wire interconnection.
These extremely compact DC-DC converters incorporate
all necessary input and output filtering, signalling and pro-
tection features which according to the latest industry
standards are required in the majority of applications. The
converters provide important advantages such as flexible
output power through primary current limitation, extremely
high efficiency, excellent reliability, very low ripple and RFI
noise levels, full input to output isolation, negligible inrush
current, soft start, overtemperature protection and input
over-/undervoltage lock-out. The converter inputs are pro-
tected against surges and transients occurring on the
source lines, covering a total input voltage range from
16 V DC up to 150 V DC with five different types.
As a modular power supply or as part of a distributed power
supply system, the low profile design significantly reduces
the necessary power supply volume without sacrificing high
reliability.
The units are designed as forward converters using planar
magnetics and control circuits in hybrid technology. The
switching frequency is fix at 307 kHz under normal operat-
ing conditions. Triple and quadruple output modules have
their voltage regulation of output 3 and 4 relying on the
close magnetic coupling of transformer and output conduc-
tor together with the circuit symmetry of their main outputs
2, respectively 1. Outputs with an equal output voltage can
either be series or parallel connected.
The outputs are continuously open- and short-circuit proof.
LEDs at the front panel and an isolated output power good
option indicate the status of the power supply modules.
Voltage suppressor diodes protect the outputs against an
internally generated overvoltage.
The fully enclosed, black coated aluminium case acts as
heat sink and RFI shield. It is particularly suitable for 19"
rack systems occupying 3U/4TE only, but can also be
chassis-mounted by means of four M3 screws. Connector
type is H15 and for single output modules H15 S2.
Full system flexibility and n+1 redundant operating mode
are possible due to virtually unrestricted series or parallel
connection capabilities of all outputs. In parallel connection
Table of Contents
Page
Page
Summary.......................................................................... 1
Type Survey and Key Data .............................................. 2
Type Key and Product Marking ........................................ 4
Mechanical Data .............................................................. 5
Safety and Installation Instructions .................................. 6
Edition 4/6.99
1/8
MELCHER
The Power Partners.
P Series
DC-DC Converters >100Watt
Industrial Environment
Type Survey and Key Data
Table 1a: Type survey BP, CP
Output 1, 4 3
Output 2, 3 3
Input voltage range and efficiency 2
Options
4
4
Uo nom
[V DC]
TA = 50°C TA = 71°C
Po max [W] Po nom [W]
Uo nom
[V DC]
TA = 50°C TA = 71°C hmin
Po max [W] Po nom [W] [%]
Ui min...Ui max
hmin
[%]
Ui min...Ui max
16...36 V DC
33.6...75 V DC
3.3
5.1
125
152
106
122
-
-
-
-
-
-
BP 1101-7R
BP 1001-7R
CP 1101-7R
CP 1001-7R
-9
D
V 6
G
3.3
5.1
12
15
24
62
76
90
82
84
53
61
72
60
60
5.1
5.1
12
15
24
76
76
90
82
84
61
61
72
60
60
BP 2101-7R
BP 2001-7R
BP 2320-7R
BP 2540-7R
BP 2660-7R
CP 2101-7R
CP 2001-7R
CP 2320-7R
CP 2540-7R
CP 2660-7R
T 6
i
W
5.1
5.1
76
76
61
61
12, 12
15, 15
72 1
75 1
60 1
60 1
BP 3020-7R
BP 3040-7R
CP 3020-7R
CP 3040-7R
5.1, 3.3 5
24, 24
50 1
84 1
40 1
60 1
12, 12
24, 24
72 1
84 1
60 1
60 1
BP 4720-7R
BP 4660-7R
CP 4720-7R
CP 4660-7R
Table 1b: Type survey DP, EP
Output 1, 4 3
Output 2, 3 3
Input voltage range and efficiency 2
Options
4
4
Uo nom
[V DC]
TA = 50°C TA = 71°C
Po max [W] Po nom [W]
Uo nom
[V DC]
TA = 50°C TA = 71°C hmin
Po max [W] Po nom [W] [%]
Ui min...Ui max
hmin
[%]
Ui min...Ui max
40...101 V DC
66...150 V DC
3.3
5.1
125
152
106
122
-
-
-
-
-
-
DP 1101-7R
DP 1001-7R
EP 1101-7R
EP 1001-7R
-9
D
V 6
G
3.3
5.1
12
15
24
62
76
90
82
84
53
61
72
60
60
5.1
5.1
12
15
24
76
76
90
82
84
61
61
72
60
60
DP 2101-7R
DP 2001-7R
DP 2320-7R
DP 2540-7R
DP 2660-7R
EP 2101-7R
EP 2001-7R
EP 2320-7R
EP 2540-7R
EP 2660-7R
T 6
i
W
5.1
5.1
76
76
61
61
12, 12
15, 15
72 1
75 1
60 1
60 1
DP 3020-7R
DP 3040-7R
EP 3020-7R
EP 3040-7R
5.1, 3.3 5
24, 24
50 1
84 1
40 1
60 1
12, 12
24, 24
72 1
84 1
60 1
60 1
DP 4720-7R
DP 4660-7R
EP 4720-7R
EP 4660-7R
Table 1c: Type survey GP
Output 1, 4 3
Output 2, 3 3
Input voltage range and efficiency 2
Options
Uo nom
[V DC]
TA = 50°C TA = 71°C
Po max [W] Po nom [W]
Uo nom
[V DC]
TA = 50°C TA = 71°C hmin
Ui min...Ui max
Po max [W] Po nom [W] [%] 19.2...57.6 V DC
3.3
5.1
100
120
80
92
-
-
-
-
-
-
GP 1101-7R
GP 1001-7R
-9
D
V 6
G
3.3
5.1
12
15
24
50
60
72
68
70
40
46
54
50
48
5.1
5.1
12
15
24
60
60
72
68
70
46
46
54
50
48
GP 2101-7R
GP 2001-7R
GP 2320-7R
GP 2540-7R
GP 2660-7R
T 6
i
W
5.1
5.1
60
60
46
46
12, 12
15, 15
66 1
68 1
48 1
50 1
GP 3020-7R
GP 3040-7R
5.1, 3.3 5
24, 24
40 1
70 1
30 1
48 1
12, 12
24, 24
66 1
70 1
48 1
48 1
GP 4720-7R
GP 4660-7R
1 The cumulated power of both outputs may not exceed the total power for the specified ambient temperature.
2 Minimum efficiency at Ui nom, Po nom and TA = 25°C
3 Output configuration with second output semi-regulated (±5% Uo nom if each output is loaded with ≥5% Po nom). Parallel or series con-
figuration possible.
4 Short deviations of Ui min/Ui max according to EN 50155 possible.
5 Internal common ground.
6 Not available for all types.
Edition 4/6.99
MELCHER
2/8
The Power Partners.
Industrial Environment
DC-DC Converters >100Watt
P Series
01009
Output Configuration
Triple output
Vo1+
The P unit design allows high flexibility in output configura-
tion to cover almost every individual requirement, by simply
wiring the separated outputs in parallel, series or independ-
ent configurations as per following figures. Parallel and se-
ries operation of several modules with equal output voltage
is possible also.
4
12
14
8
S1+
S1–
Load 1
28
30
i
Vo1–
Vo2+
Vo3+
Vo2–
Vo3–
Vi+
32 Vi–
6
01006
Double output
18
10
20
Load 2
6
Vo2+
S2+
Vo1+
S1+
18
4
Fig. 4
Parallel configurration of output 2 and 3
28
30
12
14
8
i
Load 1
Vi+
S1–
01010
32 Vi–
Vo1–
S2–
Triple output
20
10
Vo1+
4
Vo2–
12
S1+
Load 1
Load 2
28
30
S1–
Vo1–
Vo2+
Vo2–
Vo3+
Vo3–
i
14
8
Fig. 1
Parallel output configuration
Vi+
32 Vi–
6
01007
Double output
10
18
20
Vo2+
6
S2+ 18
S2– 20
Fig. 5
Series configurration of output 2 and 3
Vo2–
10
Load 1
Vo1+
S1+
28
30
i
4
01011
Vi+
12
Quadruple output
Vo1+
32 Vi–
S1– 14
4
Vo1–
8
8
Vo1–
Load 1
Load 4
28
30
Vo4– 14
i
Fig. 2
Series output configuration
Vo4+ 12
Vi+
32 Vi–
Vo2+
Vo2–
Vo3+
Vo3–
6
01008
Load 2
Load 3
Triple output
10
18
20
Vo1+
4
12
14
8
S1+
S1–
Load 1
28
30
i
Fig. 6
Common ground configuration of output 1 with 4 and in-
dependent configuration of output 2 and 3
Vo1–
Vo2+
Vo2–
Vo3+
Vi+
32 Vi–
6
Load 2
Load 3
10
18
01012
Quadruple output
Vo1+
4
Vo3– 20
12
Vo4+
Fig. 3
Load 1
Load 2
28
30
Vo4– 14
i
Independent output configuration (all outputs)
Vo1–
Vo2+
Vo2–
Vo3+
Vo3–
8
6
Vi+
32 Vi–
10
18
20
Fig. 7
Parallel configuration of output 1 with 4 and series con-
figuration of output 2 with 3
Edition 4/6.99
3/8
MELCHER
The Power Partners.
P Series
DC-DC Converters >100Watt
Industrial Environment
Type Key and Product Marking
Type Key
C P 2 5 40 -7 R D V G T i W
Input voltage range Ui:
16...36 V DC ................................................. B
33.6...75 V DC .............................................. C
40...101 V DC ............................................... D
66...150 V DC ................................................E
19.2...57.6 V DC .......................................... G
Series ...............................................................................P
Number of outputs:
Single output ................................................. 1
Double output ................................................ 2
Triple output .................................................. 3
Quadruple output........................................... 4
Nominal voltage output 1/output 4, Uo1/4 nom
:
5.1 V .............................................................. 0
3.3 V .............................................................. 1
12 V ............................................................... 3
15 V ........................................................... 4, 5
24 V ............................................................... 6
5.1/3.3 V ........................................................ 7
other voltages ............................................ 2, 8
Other specifications for main output........................ 01...99
Nominal voltage output 2/output 3, Uo2/3 nom
5.1 V ............................................................ 01
12 V ............................................................. 20
15 V ............................................................. 40
24 V ............................................................. 60
other voltages ....................................... 70...99
Operational ambient temperature range TA:
–25…71°C ................................................... -7
–40...71°C (option) ....................................... -9
customer specific....................................-0...-6
Output voltage control input (auxiliary function) .............. R
Options: Out OK output .............................................. D
VME compatible monitoring circuit ................V
Second control loop (OVP)........................... G
Current sharing.............................................. T
Isolated inhibit on secondary side .................. i
Synchronisation of switching frequency .......W
Example: CP 2540-7R: DC-DC converter, input voltage range 33.6...75 V, each providing 15 V, equipped with R-control
for output 1 and operating ambient temperature of –25...71°C.
Note: All units feature the following auxiliary functions which are not shown in the type designation: input and output filter,
inhibit (primary referenced), sense lines (single, double and triple output modules only) and LED indicators.
Product Marking
Basic type designation, applicable safety approval and recognition marks, CE mark, warnings, pin allocation of input, out-
put and auxiliary functions, Melcher patents and company logo. Label with specific type designation, input voltage range,
nominal output voltage and output current, degree of protection, batch no., serial no. and data code including production
site, modification status and date of production. Confirmation of success fully passed final test.
Identification of LED's.
Edition 4/6.99
MELCHER
4/8
The Power Partners.
Industrial Environment
DC-DC Converters >100Watt
P Series
Mechanical Data
Dimensions in mm. Tolerances ±0.3 mm unless otherwise indicated.
European
Projection
09099
104 ±0.15
Front plate
M3; through
Measuring point of
case temperature TC
Rear
face
Main
face
70
Back plate
111
100
95
LED "Out OK" green
LED "In OK" green
Fig. 8
Case P01, weight 480 g
Aluminium, fully enclosed,
black finish and self cooling
Note: Long Cases, elogated by 60 mm for 220 mm rack
depth is available on request.
Edition 4/6.99
5/8
MELCHER
The Power Partners.
P Series
DC-DC Converters >100Watt
Industrial Environment
Safety and Installation Instructions
Connector Pin Allocation
The connector pin allocation table defines the electrical potentials and the physical pin positions on the H15 connector. Pin
no. 26, the protective earth pin present on all BP…GP DC-DC converters is leading, ensuring that it makes contact with the
female connector first.
30
26 22
18 14
8/10
30
26 22
18 14 10
6
10051
10025
32
28 24
20 16
12
4/6
32
28 24
20 16
12
8
4
Fig. 9
View of male H15 connector
Fig. 10
View of male H15 S2 connector for P 1000
Table 2: Pin allocation of the H15 S2 and H 15 connector
Pin
4
P 1000
P 2000
P 3000
P 4000
Vo1+ 1
Vo1– 1
S+ 2
Output 1
Vo1+
Vo2+
Vo1–
Vo2–
S1+ 2
S1– 2
R1
Output 1
Output 2
Output 1
Output 2
Sense 1
Sense 1
Control of Uo1
Vo1+
Vo2+
Vo1–
Vo2–
S1+ 2
S1– 2
R1
Output 1
Vo1+
Vo2+
Vo1–
Vo2–
Vo4+
Vo4–
R1/4
T1
Output 1
Output 2
Output 1
Output 2
Output 4
Output 4
6
Output 2
8
Output 1
Output 1
10
12
14
16 3
Output 2
Sense
Sense 1
2
S–
Sense
Sense 1
R
T
Control of Uo
Control of Uo1
Current sharing
Output 3
Control of Uo1/4
Current sharing
Output 3
T1
18 3
Current sharing
T1
Current sharing
Sense 2
Vo3+
Vo3+
S2+
20 3 n.c.
Pd in
Not connected
Power down
Output good
S2–
Sense 2
Vo3–
Output 3
Vo3–
Output 3
Pd in
Out OK+
Power down
Output good
22 3 Out OK+
Out OK+
Output good
Out OK+
Output good
i+
Inhibit secondary i+
Inhibit secondary i+
Save data
Inhibit secondary i+
Inhibit secondary
D
Save data
D
24 3 Out OK–
Output good
Out OK–
Output good
Inhibit secondary i–
Reset
Out OK–
Output good
Out OK–
Output good
i–
Inhibit secondary i–
Inhibit secondary i–
Inhibit secondary
Rst
Reset
Rst
26 2
28 3
Prot. ground
Inhibit
Prot. ground
Prot. ground
Prot. ground
Inhibit
i
i
Inhibit
i
Inhibit
i
W
Vi+
Vi–
Synchronisat.
Input
W
Vi+
Vi–
Synchronisat.
Input
W
Vi+
Vi–
Synchronisat.
Input
W
Vi+
Vi–
Synchronisat.
Input
30
32
Input
Input
Input
Input
1 H15 S2 connector with two high current contacts.
2 Leading pin (pre-connecting).
3 One function/option per pin possible only.
Edition 4/6.99
6/8
MELCHER
The Power Partners.
Industrial Environment
DC-DC Converters >100Watt
P Series
Installation Instruction
The P series DC-DC converters are components, intended
exclusively for inclusion within other equipment by an in-
dustrial assembly operation or by professional installers.
Installation must strictly follow the national safety regula-
tions in compliance with the enclosure, mounting, creep-
age, clearance, casualty, markings and segregation re-
quirements of the end-use application. See also: Technical
Information: Installation and Application.
Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids is to be prevented, since the power supplies
are not hermetically sealed.
Standards and approvals
All P series DC-DC converters correspond to class I equip-
ment.
Connection to the system shall be made via the female
connector H15 or H15 S2 (see: Accessories) according to
Connector pin allocation. Other installation methods may
not meet the safety requirements.
They are pending to be UL recognized according to UL
1950, UL recognized for Canada to CAN/CSA C22.2 No.
950-95 and LGA approved to IEC/EN 60950 standards and
have been designed in accordance with these standards
for:
Check for hazardous voltages before altering any connec-
tions.
• Building in
• Basic insulation between input and case, based on
250 V AC or 240 V DC
• Double or reinforced insulation between input and out-
put, based on 250 V AC or 240 V DC
The DC-DC converters are provided with pin no. 26 ( ),
which is reliably connected to the case. For safety reasons
it is essential to connect these pins to the protective earth of
the supply system if required in: Safety of operator accessi-
ble output circuit.
• Operational insulation between output(s) and case
• Operational insulation between the outputs
• Operational insulation between option D or i and out-
put(s)
• Operational insulation between option D or i and case
• The use in a pollution degree 2 environment
• Connecting the input to a primary circuit with a maximum
transient rating of 2500 V (overvoltage class III based on
a 110 V primary circuit, overvoltage class II based on a
230 V primary circuit).
The Vi input (pin no. 32) is internally fused. This fuse is de-
signed to protect the unit in case of overcurrent and may
not be able to satisfy all customer requirements. External
fuses in the wiring to one or both input pins (no. 30 and/or
no. 32) may therefore be necessary to ensure compliance
with local requirements.
Important: Whenever the inhibit function is not in use,
pin 28 (i) should be connected to pin 32 (Vi–) to enable
the output(s).
After approvals, the AC-DC converters are subject to
manufacturing surveillance in accordance with the above
mentioned UL, CSA, EN and with ISO 9001 standards.
Do not open the modules, or guarantee will be invalidated.
Make sure that there is sufficient air flow available for con-
vection cooling. This should be verified by measuring the
case temperature when the unit is installed and operated in
the end-use application. The maximum specified case tem-
perature TC max must not be overridden.
Protection Degree
Condition: Female connector fitted to the unit.
The protection degree of the DC-DC converters is IP 40.
Ensure that a unit failure (e.g. by an internal short-circuit)
does not result in a hazardous condition. See also: Safety
of operator accessible output circuit.
Isolation
The electric strength test is performed as factory test in accordance with IEC/EN 60950 and UL 1950 and should not be
repeated in the field. Melcher will not honour any guarantee claims resulting from electric strength field tests.
Table 3: Isolation
Characteristic
Input to
case
Input to Output to Output to Auxiliary 1 Auxiliary 1 Auxiliary 1 Unit
output(s)
case
output(s) to input
to case to output
Electric
strength
test voltage
Required according to
IEC/EN 60950
1.5
2.1
2.1
1.5
3.0 2
0.5
-
-
3.0 2
4.2 2
4.2 2
3.0 2
0.5
0.7
1.5
1.1
0.5
0.7
kVrms
4.2 2
0.7
kV DC
Actual factory test 1 s
4.2 2
1.5
0.5
0.35
0.5
AC test voltage equivalent
to actual factory test
3.0 2
1.1
0.35
kVrms
Insulation resistance at 500 V DC
>300
>300
>300
>100
>300
>100
>100
MΩ
1 Insulated auxiliary circuits, e.g. Out OK output circuit (option D), inhibit on output side (option i).
2 In accordance with IEC/EN 60950 only subassemblies are tested in factory with this voltage.
Edition 4/6.99
MELCHER
7/8
The Power Partners.
P Series
DC-DC Converters >100Watt
Industrial Environment
Safety of operator accessible output circuit
If the output circuit of an DC-DC converter is operator ac-
cessible, it shall be an SELV circuit according to IEC/EN
60950 related safety standards
nominal voltages if in series or +/– configuration) of 35 V.
However, it is the sole responsibility of the installer to as-
sure the compliance with the relevant and applicable safety
regulations. More information about this subject and about
output circuits at hazardous voltages are given in: Techni-
cal Information: Safety.
The following table shows some possible installation con-
figurations, compliance with which causes the output circuit
of the DC-DC converter to be an SELV circuit according to
IEC/EN 60950 up to a configured output voltage (sum of
Table 4: Safety concept leading to an SELV output circuit
Conditions Front end
DC-DC converter
Result
Nominal
supply
Minimum required grade
of insolation, to be pro-
Maximum DC Minimum required safety
output voltage status of the front end output specified safety status of the of the DC-DC
Measures to achieve the
Safety status
voltage
vided by the AC-DC front from the front circuit
end, including mains
output circuit
converter
output circuit
end 1
supplied battery charger
Mains
Operational (i.e. there is
≤168 V
Primary circuit (The nominal Double or reinforced insula-
SELV circuit
≤250 V AC no need for electrical iso-
lation between the mains
supply circuit and the
DC-DC converter input
circuit)
voltage between any input
pin and earth can be up to
250 V AC or 240 V DC.)
tion, based on 250 V AC and
240 V DC (provided by the
DC-DC converter) and
earthed case 3
Basic
Earth related hazardous
voltage secondary circuit 2
(The nominal voltage
Double or reinforced insula-
tion, based on the maximum
nominal output voltage from
the front end (both provided
between any input pin and
earth can be up to 250 V AC by the DC-DC converter) and
or 240 V DC.)
earthed 2 case
Unearded hazardous voltage Supplementary insulation,
secondary circuit
based on 250 V AC and DC
and double or reinforced
insulation, based on the
maximum nominal output
voltage from the front end
(both providedby the DC-DC
converter) andearthed 3 case
Supplementary
Unearded hazardous voltage Basic insulation, based on
secondary circuit 3
250 V AC and DC (provided
by theDC-DC converter)
1 The front end output voltage should match the specified input voltage range of the DC-DC converter.
2 The maximum rated input voltage of the EQ units according to IEC/EN 60950/UL 1950 is 150 V.
3 Has to be insulated from earth by at least supplementary insulation (by the installer) according to the relevant safety standards, e.g.
IEC/EN 60950, based on the maximum nominal output voltage from the front end. If the converter case is accessible, it has to be
earthed or the front end output circuit has to be insulated from the converter case by at least basic insulation, based on the maximum
nominal mains supply voltage.
Max. 250 V AC or 240 V DC
10052
Fuse
+
~
Mains
AC-DC
front
end
DC-DC
con-
verter
Battery
SELV
Fuse
–
~
Max. 250 V AC or 240 V DC
Earth
connection
Fig. 11
Schematic safety concept
Use fuse, suppressor diode and earth connections as per
table: Safety concept leading to an SELV output circuit.
Use fuse(s) also if required by the application. See: Instal-
lation Instructions.
Edition 4/6.99
8/8
MELCHER
The Power Partners.
GP2540-7RDGTW 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
GP2540-7RDGW | BEL | DC-DC Regulated Power Supply Module, 2 Output, 136W, METAL, CASE P01, MODULE | 获取价格 | |
GP2540-7RDIW | BEL | DC-DC Regulated Power Supply Module, 2 Output, 136W, METAL, CASE P01, MODULE | 获取价格 | |
GP2540-7RDT | BEL | DC-DC Regulated Power Supply Module, 2 Output, 136W, Hybrid, METAL, CASE P01, MODULE | 获取价格 | |
GP2540-7RDTB1 | BEL | DC-DC Regulated Power Supply Module, 2 Output, 136W, Hybrid, METAL, CASE P01, MODULE | 获取价格 | |
GP2540-7RDTB3 | BEL | Analog Circuit, | 获取价格 | |
GP2540-7RDTI | BEL | DC-DC Regulated Power Supply Module, 2 Output, 136W, METAL, CASE P01, MODULE | 获取价格 | |
GP2540-7RDTW | BEL | DC-DC Regulated Power Supply Module, 2 Output, 136W, Hybrid, METAL, CASE P01, MODULE | 获取价格 | |
GP2540-7RDTWB3 | BEL | Analog Circuit, | 获取价格 | |
GP2540-7RDV | BEL | DC-DC Regulated Power Supply Module, 2 Output, 136W, METAL, CASE P01, MODULE | 获取价格 | |
GP2540-7RDVG | BEL | DC-DC Regulated Power Supply Module, 2 Output, 136W, METAL, CASE P01, MODULE | 获取价格 |
GP2540-7RDGTW 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6