GRND-90A161G [BEL]
DC-DC Regulated Power Supply Module, 1 Output, 144W, Hybrid, ROHS COMPLIANT PACKAGE-164;型号: | GRND-90A161G |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 144W, Hybrid, ROHS COMPLIANT PACKAGE-164 |
文件: | 总13页 (文件大小:238K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
GRND-90A161
Features
RoHS Compliant
Rev.A
•
•
•
•
•
•
Non-Isolated
•
•
•
•
•
Input Under-Voltage Lockout
OCP/SCP
High Efficiency
Fixed Frequency
Wide Input
2-Wire Remote sense
7 bit VID Digital Voltage Programming
I2C/SMbus Available – Consult Factory
Remote On/Off
Class 1, Category 2, Non-Isolated DC/DC Converter (refer to IPC-9592)
Applications
•
•
•
Networking
Computers and peripherals
Telecommunications
Description
The GRND-90A Series are non-isolated step down dc/dc converters providing up to 90 A of output current and
designed to be compatible with the Intel VRM11 requirements. Standard features include remote on/off, over
current protection, remote sense, VR_Hot signal and a power good signal. This product also makes use of
adaptive positioning to improve transient response performance. These products may be used almost anywhere
low-voltage silicon is being employed and a nominal 12 Vdc source is available. Typical applications include file
servers, work stations and other computing applications.
Part Selection
Output Voltage
Input Voltage
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Model Number
Active High
0.82 Vdc - 1.6 Vdc
10.8 Vdc - 13.2 Vdc
90 A
144 W
83%
GRND-90A161
Notes: Add “G” suffix at the end of the model number to indicate Tray Packaging.
Part Number Explanation
G R ND – 90 A 16 1
1
2
3
4 5
6
7
1---Goldfinger
2---RoHS 6, change “R” to “7” means RoHS 5
3---Series name
4---Series code
5---Wide input range (10.8-13.2V)
6---Wide output range (0.82-1.6V)
7---Suffix
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
1
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Absolute Maximum Ratings
Unit
Parameter
Min
Typ
Max
Notes
Continuous non-operating Input
Voltage
-0.3
-
15
V
Remote On/Off
-0.3
0
-
-
-
5.5
70
V
Ambient Temperature
Storage Temperature
°C
°C
-55
125
Note: Ratings used beyond the maximum ratings may cause a reliability degradation of the converter or may
permanently damage the device.
Input Specifications
Parameter
Min
Typ
Max
Unit
Notes
Operating Input Voltage
10.8
12
13.2
V
Input Current (full load)
Input Current (no load)
Remote Off Input Current
-
-
-
-
-
16
700
-
A
mA
mA
17
Input Reflected Ripple Current
(rms)
-
-
50
100
200
mA
With simulated source impedance of
200nH, 5Hz to 20MHz. Use 2 *
220uF/16V Oscon capacitor
Input Reflected Ripple Current
(pk-pk)
150
mA
I2t Inrush Current Transient
Turn-on Voltage Threshold
Turn-off Voltage Threshold
-
-
1
A2s
V
9.5
8.4
10
8.9
10.5
9.4
V
Note: All specifications are typical at 25 °C unless otherwise stated.
Output Specifications
Parameter
Min
Typ
Max
Unit
Notes
No load, excluding adaptive
positioning, VRM11 VID 0x32
Output Voltage Set Point
1.27
1.285
1.3
V
Adaptive Positioning
Line Regulation
-
-
1.25
-
mOhm Droop Impedance
mV
±5
±10
Regulation Over Temperature
(0deg.C-70deg.C)
-
±5
±10
mV
Ripple and Noise (pk-pk)
Ripple and Noise (rms)
-
-
-
-
25
10
mV
0-20 MHz BW
mV
Ripple and Noise (pk-pk)
under worst case
over all operating input voltage, load
-
-
30
mV
and temperature conditions.
Thermal Design Current
Peak Current Rating
0
-
-
-
-
70
90
A
A
A
Output Current Range
Output DC Current Limit
95
120
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
2
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Output Specifications (continued)
Parameter
Min
Typ
Max
Unit
Notes
Short Circuit Surge Transient
-
-
5
A2s
Turn on Time
-
-
3.5
-
5
1
mS
%
Overshoot at Turn on
Consult factory regarding external
capacitance outside of this range
See Note 1
See Note 1
Output Capacitance
3710
uF
Transient Response
Overshoot
-
-
-
-
-
-
-
-
50
25
50
25
mV
uS
△V50%~100%
of Max Load
Settling Time
Overshoot
di/dt=300A/us, Vin=12Vdc, Ta=25°C
mV
uS
△V100%~50%
of Max Load
Settling Time
Notes: 1. Measured with 7*470uF/7mOhm ESR SP-CAP, and 42*10uF/1206 ceramic capacitors on output.
2. All specifications are typical at nominal input, full load at 25°C unless otherwise stated.
General Specifications
Parameter
Min
Typ
Max
Unit
Notes
Efficiency
81
83
-
%
Vin =12V, Iout=70A; VID=0x32
Switching Frequency
-
400
-
-
kHz
Over Temperature Alert
100
110
°C
Vo,set +
0.175
Over Voltage Protection
Weight
-
-
-
-
V
g
46
Calculated Per Bell Core SR-332
(Vin=12 V, Io=70A, Ta = 25 °C,
FIT=109/MTBF)
FIT
500
-
-
Dimensions
Inches (L × W × H)
Millimeters (L × W × H)
3.80 x 1.06 x 0.84
96.52 x 26.80 x 21.21
Note: All specifications are typical at 25 °C unless otherwise stated.
Remote On/Off
Parameter
Min
Typ
Max
Unit
Notes
Signal Low (Unit Off)
-0.3
-
0.4
V
Active High
The remote on/off pin open, Unit on.
Signal High (Unit On)
Current Sink
0.8
0
-
-
5.5
1
V
mA
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
3
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Thermal Derating Curves
②
③
④
⑤
①
The thermal reference point Tref is shown above. For reliable operation this temperature should not exceed
110°C. The output power of the module should not exceed the rated power for the module.
Vin=12V, VID=0x32
Maximum junction temperature of semiconductors derated to 120 degree C.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
4
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Efficiency Data
90.00%
85.00%
80.00%
75.00%
70.00%
65.00%
VID=0x7E
VID=0x32
VID=0x02
7A
17.5A
35A
52.5A
70A
OUTPUT CURRENT(A)
Ripple and Noise Waveforms
Ripple and noise at 12Vdc input, VID=0x32, Iout=0A
Ripple and noise at 12Vdc input, VID=0x32, Iout=70A
Note: Ripple and noise at 0-20MHz BW, and Ta=25 deg C.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
5
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Transient Response Waveforms
VID=0x32 45A-90A Load Transients
VID=0x32 90A-45A Load Transients
Note: Transient Response at Vin=48V, di/dt=5A/uS, with typical cap bank on output, and Ta=25 deg C.
Over Current Protection
To provide protection in a fault output overload condition, the module is equipped with internal current-limiting
circuitry and can endure current limiting for a few mili-seconds. If the overcurrent condition persists beyond a few
milliseconds, the module will shut down into hiccup mode. The module operates normally when the output
current goes into specified range.
Vin=12V, VID=0x32
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
6
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Startup & Shutdown
Rise time
VID=0x32,
Vin=12V,
Iout=70A
Startup time
VID=0x32,
Vin=12V,
Iout=70A,
Ch1: Vout
Ch3: OUTEN
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
7
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Remote Sense
This module has remote sense compensation feature. It can minimize the effects of resistance between
module’s output and load in system layout and facilitates accurate voltage regulation at load terminals or
other selected point.
1. The remote sense lines carries very little current and hence do not require a large cross-sectional area.
2. This module compensates for a maximum drop of 10% of the nominal output voltage.
3. When using remote sense compensation, all the resistance, parasitic inductance and capacitance of the
system are incorporated within the feedback loop of this module. It can make an effect on the module's
compensation, affecting the stability and dynamic response. A 0.1uF ceramic capacitor can be
connected at the point of load to de-couple noise on the sense wires.
4. Recommend the connection of remote sense compensation as below figure. There are a resistor RS+
(51.1 ohm) from Vo+ to Sense+ and a resistor RS- (51.1 ohm)) from Vo- to Sense- inside of this module.
Vo+
Sense+
Load
Sense-
Vo-
5. If not using remote sense compensation, please connect sense directly to output at module's pin, that is,
connect sense+ to Vo+ and sense- to Vo- at module's pin, the shorter the better. See below figure.
Vo+
Sense+
Load
Sense-
Vo-
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
8
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Input Under-voltage Lockout
Under-voltage Lockout
V1=8.9V
V2=10V
Voltage Falling
Voltage Rising
Input Voltage (V)
V1
V2
Power Good
1. This module has a power good indicator output. Power good pin used positive logic and is open collector.
2. Power good pin can sink 1mA.
3. The maximum voltage pulled up externally on Power Good pin should not exceed 5V.
4. When the output is within 10% of the VID setting, the power good pin will be pulled high.
Typical Start-up Using Remote ON/OFF(Vin=12.0V, VID=0x32, Io=0A)
Ch1: OUTEN
Ch2: PWRGD
Ch4: VOUT
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
9
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Mechanical Outline
Row A
Function
Row B
Pin
Pin
Function
GND
Pin
Function
GND
Pin
164
163
162
161
160
159
158
157
156
155
154
153
-
Function
VBIAS
SD
1
PWRGD
SC
25-26
27-30
31-34
35-38
39-42
43-46
47-48
49-52
53-56
57-60
61-64
65-68
69-70
71-74
75-78
79-82
139-140
135-138
131-134
127-130
123-126
119-122
117-118
113-116
109-112
105-108
101-104
97-100
95-96
2
VOUT
GND
VOUT
GND
3
OUTEN
LL1
LL0
4
VOUT
GND
VOUT
GND
VID6
5
6
VID5
VID3
VID1
VID4
VOUT
GND
VOUT
GND
VID2
7
VID0
8
Reserved
+SENSE
SP
VOUT
GND
VOUT
GND
Reserved
-SENSE
VIDSEL
VRM_PRES
BUSS ADD
Key
9
10
VOUT
GND
VOUT
GND
11
VR_HOT
Reserved
Key
12
VOUT
GND
VOUT
GND
-
13-16
17-20
21-24
VIN
VOUT
GND
91-94
VOUT
GND
149-152
145-148
141-144
VIN
GND
87-90
GND
VOUT
VOUT
83-86
VOUT
VOUT
Note:
1) Undimensioned components are shown for visual reference only.
2) All dimensions in inches (mm); Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm).
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
10
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Signal Definitions
Vin
Input power to the converter
Common return for both input and output
GND
VID0, VID1, VID2, Logic level inputs used to set the output voltage, refer to VID table. Connect VID0 thru VID6
VID3, VID4, VID5, pins to open-drain outputs with external pull-up resistors. Valid logic low is -0.3V to 0.4V,
VID6
valid logic high level is 0.8V to 5.5V.
Digital input used to select between extended VR10 and VR11 VID tables. Internally pulled
up to 3.3V to select VRM11.
VIDSEL
The open drain power good signal indicates the output voltage is within 10% of the VID
setpoint.
PWRGD
Remote voltage sense lines. Connect these at the point of load, to VOUT and GND
respectively.
Vsense+, Vsense-
VOUT
Output voltage available to the load.
Logic level input used to enable the converter when high. Valid logic low is -0.3V to 0.4V,
valid logic high level is 0.8V to 5.5V
OUTEN
Load line select pins. Working in conjunction with VID_SEL, LL0/LL1 are used to select
load line slope. Currently only 1.25mOhm slope is supported. Module can be configured to
support multiple load line slopes.
LL0/LL1
SC SD
SP
Optional serial clock and data pins respectively for SMBus interface.
Optional programming pin for set point and over current protection mode.
Open-drain output signal, pulled actively low indicating a thermal event has been detected
on the VRM.
VR_HOT#
VRM_PRES
BUSS_ADD
Signal used by system to indicate the VRM is present in the design.
Optional addressing pin when using SMBus feature.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
11
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr. 01, 2010
VID CODES (VRM11.0 VID CODES)
Bel Power Inc., a subsidiary of Bel Fuse Inc.
HEX
Vout
HEX
Vout
HEX
Vout
(VID6 - VID0)
(VDC)
(VID7 - VID0)
(VDC)
(VID7 - VID0)
(VDC)
0
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
OFF
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
1.31250
1.30625
1.30000
1.29375
1.28750
1.28125
1.27500
1.26875
1.26250
1.25625
1.25000
1.24375
1.23750
1.23125
1.22500
1.21875
1.21250
1.20625
1.20000
1.19375
1.18750
1.18125
1.17500
1.16875
1.16250
1.15625
1.15000
1.14375
1.13750
1.13125
1.12500
1.11875
1.11250
1.10625
1.10000
1.09375
1.08750
1.08125
1.07500
1.06875
1.06250
1.05625
1.05000
1.04375
1.03750
1.03125
1.02500
1.01875
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
1.01250
1.00625
1.00000
0.99375
0.98750
0.98125
0.97500
0.96875
0.96250
0.95625
0.95000
0.94375
0.93750
0.93125
0.92500
0.91875
0.91250
0.90625
0.90000
0.89375
0.88750
0.88125
0.87500
0.86875
0.86250
0.85625
0.85000
0.84375
0.83750
0.83125
0.82500
0.81875
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
OFF
1.60000
1.59375
1.58750
1.58125
1.57500
1.56875
1.56250
1.55625
1.55000
1.54375
1.53750
1.53125
1.52500
1.51875
1.51250
1.50625
1.50000
1.49375
1.48750
1.48125
1.47500
1.46875
1.46250
1.45625
1.45000
1.44375
1.43750
1.43125
1.42500
1.41875
1.41250
1.40625
1.40000
1.39375
1.38750
1.38125
1.37500
1.36875
1.36250
1.35625
1.35000
1.34375
1.33750
1.33125
1.32500
1.31875
Note: VIDs with VID7=1 not
shown because this VRM does
not have a VID7 pin.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
12
NON-ISOLATED DC/DC CONVERTERS
10.8 Vdc - 13.2 Vdc Input, 0.82 Vdc - 1.6 Vdc Output, VRM11.0 Compatible
Apr 01, 2010
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Revision History
Date
Revision
Changes Detail
Approval
2009-9-8
A
First release
Jack Fan
1. Update output current limit; 2. Update MD( the model height change
to 0.84’’ max)
2010-4-1
B
Jack Fan
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and
other hazardous substances from electronic products.
©2010 Bel Fuse Inc. Specifications subject to change without notice. 040110
13
CORPORATE
FAR EAST
EUROPE
Bel Fuse Inc.
Bel Fuse Ltd.
Bel Fuse Europe Ltd.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
8F/ 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
相关型号:
GRND-C2A160G
DC-DC Regulated Power Supply Module, 1 Output, 192W, Hybrid, ROHS COMPLIANT PACKAGE-54
BEL
©2020 ICPDF网 联系我们和版权申明