HA28-0.5-A [BEL]
AC-DC Regulated Power Supply Module, 1 Output;型号: | HA28-0.5-A |
厂家: | BEL FUSE INC. |
描述: | AC-DC Regulated Power Supply Module, 1 Output |
文件: | 总7页 (文件大小:242K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
INTERNATIONAL SERIES LINEARS
Power-One produces the industry’s broadest selection of linear power
supplies with output voltages from 5 volts through 250 volts. Rugged
technology and proven design merge to create quiet, highly regulated,
dependable DC power.
The International Linear series is approved to domestic and interna-
tional regulatory standards, and is CE Marked to the Low Voltage
Directive (LVD).
FEATURES
•
•
•
•
•
•
•
•
•
Worldwide AC Input Capabilities: 100/120/220/230/240 VAC
±0.05% Output Regulation
Low Output Ripple
UL, CSA, and TÜV Approvals
Mean Time Before Failure (MTBF) in Excess of 300,000 Hours
CE marked to Low Voltage Directive
100% Burn-In
2 Year Warranty
Overvoltage Protection (OVP) Standard on 5V Single Outputs,
Optional for other outputs under 48V
SINGLE OUTPUT MODELS
VOLTAGE/
CURRENT
CASE
SIZE
VOLTAGE/
CURRENT
CASE
SIZE
VOLTAGE
MODEL
VOLTAGE
MODEL
HA5-1.5/OVP-A
HB5-3/OVP-A
HC5-6/OVP-A
HN5-9/OVP-A
HD5-12/OVP-A
HE5-18/OVP-A
F5-25/OVP-A
G5-35/OVP-A
CP197-A
HA15-0.9-A
HB12-1.7-A
HC12-3.4-A
HN12-5.1-A
HD12-6.8-A
HE12-10.2-A
F15-15-A
5V @ 1.5A (Note 1)
5V @ 3A (Note 1,5)
5V @ 6A (Note 1,5)
5V @ 9A (Note 1,5)
5V @ 12A (Note 1,5)
5V @ 18A (Note 1,5)
5V @ 25A (Note 1,5,6)
5V @ 35A (Note 1,5,6)
5V @ 50A (Note 1,5,6)
12V @ 0.9A (Note 2)
12V @ 1.7A (Note 5)
12V @ 3.4A (Note 5)
12V @ 5.1A (Note 5)
12V @ 6.8A (Note 5)
12V @ 10.2A (Note 5)
12V @ 16A (Note 2,5,6)
15V @ 0.9A (Note 2)
15V @ 1.5A (Note 5)
15V @ 3A (Note 5)
15V @ 4.5A (Note 5)
15V @ 6A (Note 5)
15V @ 9A (Note 5)
15V @ 15A (Note 2,5,6)
B
B
C
N
D
E
F
HA24-0.5-A
HB24-1.2-A
HC24-2.4-A
HN24-3.6-A
HD24-4.8-A
HE24-7.2-A
F24-12-A
HA24-0.5-A
HB28-1-A
HC28-2-A
HN28-3-A
HD28-4-A
HE28-6-A
F24-12-A
24V @ 0.5A (Note 2)
24V @ 1.2A (Note 5)
24V @ 2.4A (Note 5)
24V @ 3.6A (Note 5)
24V @ 4.8A (Note 5)
24V @ 7.2A (Note 5)
24V @ 12A (Note 2,5,6)
28V @ 0.5A (Note 2)
28V @ 1A (Note 5)
28V @ 2A (Note 5)
28V @ 3A (Note 5)
28V @ 4A (Note 5)
28V @ 6A (Note 5)
28V @ 10A (Note 2,5,6)
48V @ 0.5A
48V @ 1A
48V @ 3A (Note 5)
48V @ 4A (Note 5)
120V @ 0.2A
175-210V
@ 0.12A
250V @ 0.1A
B
B
C
N
D
E
24V
5V
F
F
F
B
B
C
N
D
E
B
B
C
N
D
E
28V
12V
15V
F
HB48-0.5-A
HC48-1-A
HD48-3-A
HE48-4-A
B
C
D
E
F
48V
HA15-0.9-A
HB15-1.5-A
HC15-3-A
HN15-4.5-A
HD15-6-A
HE15-9-A
B
B
C
N
D
E
120V
175-
210V
250V
HB120-0.2-A
B
B
HB200-0.12-A
HB250-0.1-A
B
F15-15-A
F
NOTES: 1) Overvoltage protection provided. Set at 6.2V 0.4V.
2) Adjustable outputs: F15-15-A: 12-15V, F24-12-A: 24-28V,
HA15-0.9-A: 12-15V, HA24-0.5-A: 24-28V.
5) Remote sense provided.
6) With output inhibit and parallel operation master/slave capability.
7) With output inhibit.
3) Nonadjustable 3 terminal regulator.
8) Adjustable 3 terminal regulator
4) Isolated outputs, can be referenced as positive (+) or negative (-).
9) Can be made into an isolated output by removing jumper W1.
1
®
INTERNATIONAL SERIES LINEARS
DUAL OUTPUT MODELS
OUTPUT
# 1
OUTPUT
# 2
CASE
SIZE
VOLTAGE
MODEL
HAA5-1.5/OVP-A
HBB5-3/OVP-A
HCC5-6/OVP-A
+5V @ 1.5A (Note 1)
+5V @ 3A (Note 1)
5V @ 6A (Note 1,4,5)
-5V @ 1.5A (Note 1)
- 5V @ 3A (Note 1)
-5V @ 6A (Note 1,4,5)
AA
BB
CC
5V
12V
15V
HAD12-0.4-A
HAD15-0.4-A
+12V @ 0.4A (Note 3)
+15V @ 0.4A (Note 3)
-12V @ 0.4A (Note 3)
-15V @ 0.4A (Note 3)
B
B
-12V @ 1A or
-15V @ 0.8 or
- 5V @ 0.4A (Note 5)
+12V @ 1A or
+15V @ 0.8A (Note 5)
HAA15-0.8-A
AA
12V
to
15V
-12V @ 1.7A or
-15V @ 1.5A or
- 5V @ 0.7A (Note 5)
-12V @ 3.4A or
+12V @ 1.7A or
+15V @ 1.5A (Note 5)
HBB15-1.5-A
HCC15-3-A
BB
CC
+12V @ 3.4A or
+15V @ 3A (Note 5)
-15V @ 3A (Note 5)
HDD15-5-A
+12V or 15V @ 5A (Note 5)
(-)12V or 15V @ 5A
E
+18-20V @ 0.4A or
+24V @ 0.6A
(-)18-20V @ 0.4A or
-24V @ 0.6A
HAA24-0.6-A
AA
18V
24V
+18-20V @ 0.9A or
+24V @ 1.2A
+18-20V @ 1.8A
(-)18-20V @ 0.9A or
-24V @ 1.2A
(-)18-20V @ 1.8A
HBB24-1.2-A
HCC24-2.4-A
BB
CC
+24V @ 2.4A (Note 5)
-24V @ 2.4A (Note 5)
5V
and
12V-15V
HAA512-A
HBB512-A
HCC512-A
5V @ 2A (Note 1,4,5)
5V @ 3A (Note 1,4,5)
5V @ 6A (Note 1,4,5)
12-15V @ 0.5A (Note 4)
12-15V @ 1.25A (Note 4,5)
12-15V @ 2.5A (Note 4,5)
AA
BB
CC
TRIPLE OUTPUT MODELS
OUTPUT
# 1
OUTPUT
# 2
OUTPUT
# 3
CASE
SIZE
MODEL
(-)12 to 15V @ 0.4A or
-5V @ 0.4A
-12V @ 1A or
-15V @ 0.8A or
-5V @ 0.4A (Note 5)
(-)12 to 15V @ 1A or
-5V @ 0.4A
-12V @ 1.7A or
-15V @ 1.5A or
-5V @ 0.7A (Note 5)
-12V @ 1.7A or
-15V @ 1.5A or
-5V @ 0.7A (Note 5)
-12V @ 1.7A or
-15V @ 1.5A or
-5V 0.7A (Note 5)
-12V @ 3.4A or
-15V @ 3A
HTAA-16W-A
HBAA-40W-A
HCAA-60W-A
HCBB-75W-A
5V @ 2A (Note 1,4)
5V @ 3A (Note 1,4,5)
+5V @ 6A (Note 1,5)
5V @ 6A (Note 1,4,5)
+12 to 15V @ 0.4A
AA
BAA
D
+12V @ 1A or
+15V @ 0.8A (Note 5)
+12 to 15V @ 1A
+12V @ 1.7A or
+15V @ 1.5A (Note 5)
CBB
+12V @ 1.7A or
+15V @ 1.5A (Note 5)
CP131-A
5V @ 8A (Note 1,4,5)
131
+12V @ 1.5A or
+15V @ 1.5A (Note 5)
HDBB-105W-A
HDCC-150W-A
5V @ 12A (Note 1,4,5)
5V @ 12A (Note 1,4,5)
DBB
DCC
+12V @ 3.4A or
+15V @ 3A (Note 5)
NOTES: 1) Overvoltage protection provided. Set at 6.2V 0.4V.
2) Adjustable outputs: F15-15-A: 12-15V, F24-12-A: 24-28V,
HA15-0.9-A: 12-15V, HA24-0.5-A: 24-28V.
5) Remote sense provided.
6) With output inhibit and parallel operation master/slave capability.
7) With output inhibit.
3) Nonadjustable 3 terminal regulator.
8) Adjustable 3 terminal regulator
4) Isolated outputs, can be referenced as positive (+) or negative (-).
9) Can be made into an isolated output by removing jumper W1.
2
®
INTERNATIONAL SERIES LINEARS
HIGH PEAK MODELS
OUTPUT
# 1
OUTPUT
# 2
OUTPUT
# 3
OUTPUT
#4
CASE
SIZE
MODEL
CP323-A
CP205-A
+5V @ 2A (Note 1)
+5V @ 1A (Note 1)
+12 @ 4A (Note 7)
-5V @ 0.5A (Note 1)
N
BAA
24V @ 1.5A/ or
1.7A @ PK (Note 4)
24V @ 5A/ or
6APK (Note 4,5)
CP131
CP510-A
CP131
CP162-A
CP510-A
+5V @ 3A (Note 1,5)
+5V @ 6A (Note 1)
-5V @ 0.6A (Note 1)
+12V @ 2.5A/
7.5APK
-5V @ 1.2A or
24V @ 3.5A/
8APK (Note 4,5)
12V @ 0.5A or
5V @ 0.25A (Note 4,8)
CP379-A
CP489-A
CP503-A
+5V @ 6A (Note 1,5,9)
+5V @ 6A (Note 1,5)
+5V @ 6A (Note 1)
-12V @ 1.2A (Note 8)
CP131
+12V @ 5A/10APK (Note 5)
+12V @ 1A
-12V @ 1A or
-5V @ 0.5A
+24V @ 2.4A/
4APK (Note 9)
CP131
NOTES: 1) Overvoltage protection provided. Set at 6.2V 0.4V.
2) Adjustable outputs: F15-15-A: 12-15V, F24-12-A: 24-28V,
HA15-0.9-A: 12-15V, HA24-0.5-A: 24-28V.
5) Remote sense provided.
6) With output inhibit and parallel operation master/slave capability.
7) With output inhibit.
3) Nonadjustable 3 terminal regulator.
8) Adjustable 3 terminal regulator
4) Isolated outputs, can be referenced as positive (+) or negative (-).
9) Can be made into an isolated output by removing jumper W1.
OVERVOLTAGE PROTECTION OPTIONS
OVERVOLTAGE PROTECTION OPTIONS
OVP SELECTION GUIDE
These optional overvoltage protection modules are offered for use with
Power-One’s International Series Linear power supplies. Each is user
adjustable from 6.4V to 34V.
MODEL
CASE SIZE
OVP MODULES REQUIRED
B,C,N,D
(1) OVP-12
SINGLE
OUTPUT
E,F
AA,B,BB,CC
E
(1) OVP-24
0.58"
(14.732 mm)
OVP-12
1.55"
(1) OVP-12 protects both outputs
(1) OVP-24 protects both outputs
(39.37 mm)
DUAL
OUTPUT
0.75"
(19.05 mm)
0.56"
AA,BAA,D
CBB, 131
DBB,DCC
(1) OVP-12 protects both 12V
through 15V outputs
(14.224 mm)
TRIPLE
OUTPUT
No. 4-40 Threaded
0.22"
Inserts (2 Places)
(5.558 mm)
N,BAA,CBB
131, CP340-A
CP510-A
PEAK
CURRENT
MODELS
(1) OVP-12 protects any output
not provided with built-in OVP
1.50"
(38.1 mm)
OVP
ADJ.
NOTE: Outputs with factory built-in OVP are indicated in the Voltage/Current Rating
Chart for each model. OVP is not available for 48V through 250V models.
0.27"
(6.858 mm)
2.75"
(69.85 mm)
OVP-24
1.25"
(31.75 MM)
0.62"
(15.8 mm)
For the Most Up-To-Date Information
www.power-one.com
24 Hours/Day—7 Days/Week
.156" (3.962 mm) Dia.
Mtg. Holes (2 Places)
0.20"
(5.08 mm)
2.00"
OVP
ADJ.
(50.8 mm)
3
®
INTERNATIONAL SERIES LINEARS
INPUT SPECIFICATIONS
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
VAC
Hz
Input Voltage - AC
(Note 1, 2)
Jumper selectable, shipped factory configured for
120VAC operation. All models must be correctly
fused for proper operation.
100 VAC Tap
120 VAC Tap
220 VAC Tap
240 VAC Tap
87
100
120
220
240
110
132
242
264
104
191
209
Input Frequency
Line Regulation
AC input.
47
63
Output voltage charge for a 10% line change: F case models.
HAD12, HAD15.
-0.01
-1.0
+0.01
+1.0
%
Outputs with adjustable three terminal regulators.
All other models.
-0.5
-0.05
+0.5
+0.05
NOTES: 1) Derate output current 10% for 50Hz operation.
2) Input voltage tolerance for 230VAC operation is +15%, -10%.
OUTPUT SPECIFICATIONS
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
Output Adjustment
Efficiency
Minimum output adjustment range (Note 1).
5 volt outputs.
12 volt and 15 volt outputs.
24 volt and higher outputs.
-5
+5
%
45
55
60
%
F case models.
3.0
5.0
0.2
mVPK-PK
mVPK-PK
%PK-PK
Ripple and Noise
(Note 2)
5 volt, 12 volt, and 15 volt models.
All three terminal regulator outputs.
24 volt through 250 volt models.
3.0mVPK-PK plus 0.02% of output voltage, max
Load Regulation
Output change for a 50% load change: F case models.
HAD12, HAD15.
-0.02
-1
+0.02
+1
%
Outputs with adjustable three terminal regulators.
All other models.
-0.5
-0.05
+0.5
+0.05
Transient Response
Recovery time, to within 1% of initial set point due to a 50% load change.
50
µS
NOTES: 1) Voltages from 3 terminal regulator outputs are not adjustable on HAD12 and HAD15.
2) Full load, 20MHz bandwidth.
SAFETY, REGULATORY, AND EMI SPECIFICATIONS
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
Agency Approvals
UL1950.
CSA 1402 or CSA 22.2 No. 234/950.
EN60950 (TÜV).
Approved
Dielectric Withstand
Voltage
Input to output.
Input to ground.
3750
3750
VRMS
Electromagnetic
Interference
FCC CFR title 47 Part 15 Sub-Part J - conducted.
EN55022 / CISPR 22 conducted.
EN55022 / CISPR 22 radiated.
Compatible with system compliance to Level B.
Leakage Current
Per EN60950
(264VAC)
23
50
µA
INTERFACE SIGNALS AND INTERNAL PROTECTION
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
Overvoltage Protection
Provided on 5 volt output units where indicated.
Other outputs may use optional overvoltage protectors OVP-12 and OVP-24.
5.8
6.6
V
Remote Sense
Total voltage compensation for cable losses with respect to the main output.
Provided on models where indicated.
250
mV
Overcurrent/Short Circuit
Protection
Automatic current limit/foldback. Rated as a percentage of output power.
115
120
140
%
Master/Slave Operation
For parallel operation of up to 6 units. Master/slave pin provided on F case models only. Contact factory for application notes.
ENVIRONMENTAL SPECIFICATIONS
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
Operating Temperature
Derate output power linearly above 50°C by 3% per °C.
At 100% load
At 40% load
0
50
70
°C
°C
Storage Temperature
-40
85
°C
Temperature Coefficient
0°C to 50°C (after 15 minute warm-up).
24 hours after warm-up.
0.1
0.3
+0.3
%/°C
%
-0.3
Shock
Operating.
20
GPK
Vibration
Random vibration from 10Hz to 2kHz, 3 axis.
6.15
GRMS
4
®
INTERNATIONAL SERIES LINEARS
OVERALL SIZE
6.50" x 4.00" x 2.10"
(165.10 mm) x (101.60 mm) x (53.34 mm)
OVERALL SIZE
10.25" x 4.00" x 2.95"
(260.35 mm) x (101.60 mm) x (74.93 mm)
AA CASE
BAA CASE
1.62"
6.50"
0.955"
(24.26 mm)
10.25"
(41.15 mm)
(165.10 mm)
5.750"
(260.35 mm)
1.250"
(31.75 mm)
0.50"
(12.70 mm)
0.50"
(12.70 mm)
9.250"
(234.95 mm)
0.87"
(22.10 mm)
(146.05 mm)
DC Output
DC Output
DC Output
3.375"
3.375"
2.375"
(60.20 mm)
(85.73 mm)
4.00"
(85.73 mm)
OVP Optional
OVP Optional
4.00"
(101.60 mm)
(101.60 mm)
.06"
2.50"
(1.52 mm)
(63.50 mm)
0.375"
(9.53 mm)
0.375"
(9.53 mm)
0.57"
(14.48 mm)
.188 Dia Mtg. Holes (16 Places)
1.250"
(31.75 mm)
.188 Dia Mtg. Holes (8 Places)
.420"
(10.67 mm)
0.450"
(11.43 mm)
WEIGHT: 5 LBS
(2.25 kg)
WEIGHT: 2.5 LBS
(1.14 kg)
0.75"
(19.05 mm)
0.75"
(19.05 mm)
OVERALL SIZE
OVERALL SIZE
B CASE
4.87" x 4.00" x 2.10"
C CASE
5.62" x 4.87" x 2.95"
(123.70 mm) x (101.60 mm) x (53.34 mm)
(142.75 mm) x (123.70 mm) x (74.93 mm)
1.62"
4.87"
2.50"
5.62"
(41.15 mm)
(123.70 mm)
(63.50 mm)
1.025"
(26.04 mm)
(142.75 mm)
0.250"
(6.35 mm)
0.87"
(22.10 mm)
4.125"
(104.78 mm)
1.250"
(31.75 mm)
4.875"
(123.83 mm)
0.50"
(12.70 mm)
0.794"
(20.17 mm)
OVP
Optional
DC Output
3.375"
DC Output
4.125"
(85.73 mm)
4.00"
2.601"
(66.07 mm)
(104.78 mm)
2.85"
(72.39 mm)
4.87"
(101.60 mm)
OVP Optional
(123.70 mm)
.06"
OVP Optional
(1.52 mm)
0.375"
(9.53 mm)
0.665"
0.75"
(19.05 mm)
(16.89 mm)
0.57"
(14.48 mm)
.50"
(12.7 mm)
.188 Dia Mtg. Holes (18 Places)
.188 Dia Mtg. Holes (12 Places)
1.250"
(31.75 mm)
.420"
(10.67 mm)
WEIGHT: 2.2 LBS
(1.0 kg)
.450"
(11.43 mm)
WEIGHT: 4.25 LBS
(1.93 kg)
.75"
(19.05 mm)
0.75"
(19.05 mm)
OVERALL SIZE
7.00" x 4.87" x 2.95"
(177.80 mm) x (123.70 mm) x (74.93 mm)
OVERALL SIZE
9.38" x 4.87" x 3.28"
(238.25 mm) x (123.70 mm) x (83.31 mm)
BB CASE
CC CASE
2.50"
7.00"
9.38"
(63.50 mm)
1.025"
(26.03 mm)
(177.80 mm)
6.250"
(238.25 mm)
0.50"
(12.70 mm)
1.250"
(31.75 mm)
1.250"
0.75"
8.375"
(212.73 mm)
0.50"
(12.70 mm)
(158.75 mm)
(31.75 mm)
(19.05 mm)
DC Output
DC Output
4.125"
4.125"
(104.78 mm)
4.87"
(104.78 mm)
AC Input
2.85"
(72.39 mm)
OVP Optional
4.88"
(123.70 mm)
OVP Optional
(123.95 mm)
2.75"
(69.85 mm)
0.665"
0.75"
(19.05 mm)
(16.89 mm)
0.050"
(12.70 mm)
0.50"
(12.70 mm)
.188 Dia Mtg. Holes (12 Places)
1.250"
(31.75 mm)
.188 Dia Mtg. Holes (16 Places)
1.250"
(31.75 mm)
0.450"
(11.43 mm)
0.525"
(13.34 mm)
WEIGHT: 4.4 LBS
(2.0 kg)
WEIGHT: 7 LBS
(3.15 kg)
0.75"
(19.05 mm)
0.75"
(19.05 mm)
5
®
INTERNATIONAL SERIES LINEARS
OVERALL SIZE
OVERALL SIZE
15.00" x 4.88" x 4.55"
(381.00 mm) x (123.95 mm) x (115.57 mm)
DCC CASE
CBB CASE
11.00" x 4.87" x 3.28"
(279.40 mm) x (123.70 mm) x (83.91 mm)
0.50"
0.75"
(19.05 mm)
(12.70 mm)
11.00"
(279.40 mm)
15.00"
1.250"
(31.75 mm)
7.50"
(381.00 mm)
14.00"
(355.60 mm)
(190.50 mm)
2.50"
(63.50 mm)
0.75"
(19.05 mm)
0.50"
(12.70 mm)
DC Output
DC Output
DC Output
DC Output
4.13"
(104.90 mm)
AC Input
OVP Optional
4.87"
(123.70 mm)
4.125"
(104.78 mm)
OVP Optional
0.50"
(12.70 mm)
3.75"
(95.25 mm)
4.88"
(123.95 mm)
.188 Dia Mtg. Holes (16 Places)
2.50
(63.50 mm)
.188 Dia Mtg. Holes (16 Places)
0.50"
(12.70)
2.75"
(69.85 mm)
0.80"
(20.32 mm)
0.80"
(20.32 mm)
WEIGHT: 12 LBS
(5.40 kg)
1.250"
(31.75 mm)
WEIGHT: 8 LBS
(3.60 kg)
0.75"
(19.05 mm)
0.75"
(19.05 mm)
OVERALL SIZE
OVERALL SIZE
D CASE
E CASE
14.00" x 4.87" x 3.53"
9.00" x 4.87" x 3.28"
(355.60 mm) x (123.70 mm) x (89.66 mm)
(228.60 mm) x (123.70 mm) x (83.31 mm)
9.00"
(228.60 mm)
8.000"
14.00"
0.50"
0.75"
(355.60 mm)
1.250"
(12.70 mm)
0.50"
(12.70 mm)
(19.05 mm)
(31.75 mm)
0.75"
(19.05 mm)
(203.20 mm)
13.000"
(330.20 mm)
1.250"
(31.75 mm)
DC Output
DC Output
4.125"
(104.78 mm)
OVP Optional
AC Input
AC Input
4.125"
(104.78 mm)
OVP Optional
4.87"
(123.70 mm)
0.50"
(12.70 mm)
2.75"
(69.85 mm)
4.87"
(123.70 mm)
2.75"
(69.85 mm)
.188 Dia Mtg. Holes (16 Places)
0.50"
(12.70 mm)
.188 Dia Mtg. Holes (16 Places)
1.250"
(31.75 mm)
1.250"
(31.75 mm)
0.525"
(13.34 mm)
WEIGHT: 10 LBS
(4.50 kg)
.130"
(3.30 mm)
WEIGHT: 7.5 LBS
(3.38 kg)
0.75"
(19.05 mm)
0.650"
(16.51 mm)
0.75"
(19.05 mm)
OVERALL SIZE
OVERALL SIZE
F CASE
DBB CASE
14.25" x 4.87" x 3.38"
16.75" x 4.88" x 5.00"
(361.95 mm) x (123.70 mm) x (85.85 mm)
(425.45 mm) x (123.95 mm) x (127.00 mm)
3.375"
(9.53 mm)
1.250"
(31.75 mm)
14.25"
(361.95 mm)
16.25"
(425.45 mm)
16.00"
(406.40 mm)
2.50"
(63.50 mm)
0.50"
(12.70 mm)
0.75"
(19.05 mm)
8.750"
(222.25 mm)
0.375"
(9.53 mm)
DC Output
4.87"
DC Output
DC Output
OVP Optional
AC Input
4.125"
(104.80 mm)
4.125"
(104.78 mm)
OVP Optional
AC Input
(123.70 mm)
3.50"
(88.90 mm)
0.375"
(9.53 mm)
2.75"
(69.85 mm)
4.88"
(123.95 mm)
0.50"
Note: AC input on far side.
(12.70 mm)
0.375"
(9.53 mm)
0.218" (5.5mm) Dia Mtg. Holes (16 Places)
.188 Dia Mtg. Holes (16 Places)
1.250"
(31.75 mm)
1.50"
(38.10 mm)
0.625"
(15.88 mm)
WEIGHT: 19 LBS
(8.55 kg)
WEIGHT: 11 LBS
(4.95 kg)
Heatsink Area.
2.50"
(63.50 mm)
0.75"
(19.05 mm)
6
®
INTERNATIONAL SERIES LINEARS
OVERALL SIZE
8.25" x 4.87" x 3.28"
(209.55 mm) x (123.70 mm) x (83.31 mm)
OVERALL SIZE
CP510-A CASE
N CASE
7.00" x 4.87" x 3.28"
(177.80 mm) x (123.70 mm) x (83.31 mm)
8.25"
(209.55 mm)
7.50"
(190.50 mm)
0.75"
(19.05 mm)
7.00"
1.25"
(31.75 mm)
.375"
(9.53 mm)
(177.80 mm)
0.75"
(19.05 mm)
1.250"
(31.75 mm)
.375"
(9.53 mm)
6.250"
(158.75 mm)
DC Output
DC Output
4.125"
(104.78 mm)
OVP Optional
4.125"
(104.78 mm)
4.87"
(123.70 mm)
4.87"
(123.70 mm)
OVP Optional
2.75"
(69.85 mm)
2.75"
(69.85 mm)
0.50"
(12.70 mm)
1.25"
(31.75 mm)
.188 Dia Mtg. Holes (16 Places)
0.50"
(12.70 mm)
.188 Dia Mtg. Holes (16 Places)
1.250"
(31.75 mm)
0.525"
(13.34 mm)
0.525"
(13.34 mm)
WEIGHT: 7.5 LBS
(3.38 kg)
WEIGHT: 6 LBS
(2.70 kg)
0.75"
(19.05 mm)
0.75"
(19.05 mm)
OVERALL SIZE
CP131 CASE
11.00" x 4.87" x 3.20"
(279.40 mm) x (123.70 mm) x (81.28 mm)
1.250"
11.00"
(31.75 mm)
(279.40 mm)
0.75"
(19.05 mm)
7.00"
(177.80 mm)
0.50"
(12.70 mm)
DC Output
DC Output
For the Most Up-To-Date Information
www.power-one.com
24 Hours/Day—7 Days/Week
4.87"
(123.70 mm)
4.125"
(104.78 mm)
OVP Optional
2.75"
(69.85 mm)
.50"
(12.70 mm)
.188 Dia Mtg. Holes (16 Places)
1.250"
(31.75 mm)
0.450"
(11.43 mm)
WEIGHT: 9 LBS
(4.05 kg)
0.75"
(19.05 mm)
7
相关型号:
©2020 ICPDF网 联系我们和版权申明