HAD030TGE-A [BEL]
DC-DC Regulated Power Supply Module, 2 Output, 30W, Hybrid;型号: | HAD030TGE-A |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 2 Output, 30W, Hybrid 输出元件 |
文件: | 总3页 (文件大小:171K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ꢀꢀ
ꢀꢀ
(888) IPD-CONVerters
(888) 473-2668
www.ipdconverters.com
HAD SERIES - DUAL OUTPUT, 30 WATT
DESCRIPTION
FEATURES
HAD dual output DC/DC converters feature high
efficiency, open-frame packaging, and 1500 VDC
isolation. The HAD family allows board designers
to deliver any combination of power from
either output, up to each model’s maximum rating.
The HAD uses planar magnetics and has an MTBF of
over a million hours.
• Independent Dual 5V and • Trim And Enable Pins
3.3V Outputs
• Flexible Load Sharing
• Fixed Frequency
• 1500V Isolation
• High Efficiency Topology • Planar Magnetics
• Open-Frame Design
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC / 48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
Input Transient Withstand
UVLO 24V Input / 48V Input
Inrush Current Limit
18 - 36 / 34 - 75 VDC
60 mA
Shunt Diode
100 V/100 ms
17V on, 15V off / 33V on, 30V off
1A2/S
Efficiency vs. Load (48V Input)
Output
Setpoint Accuracy
±1%
1.0% Vout
80
75
70
65
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current, 5V/3.3V
1.0% Vout
300 mA/500 mA
25% Iout
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
4% Vout
60
HAD030ZGE-A
500
µs
55
±10%
50
45
40
Power Limit Threshold Range, % of Iout Rated
110 - 140%
OVP Trip Range
OVP Type
115 - 140% Vout Nom.
Hiccup
Overcurrent Protection Type
Continuous
10
20
30
40
50
60
70
80
90
100
LOAD %
General
Turn-On Time
10 ms
Positive Logic
500 kHz
Remote Shutdown1
Switching Frequency
Isolation
Notes
For negative logic, add suffix “N” to model number.
1
†
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
1500 VDC
1050 VDC
500 VDC
0.03%/°C
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
-40 To +100°C
-40 To +125°C
105 To 115°C
95%
Storage Range
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
5 g
1.3 x 106 hrs
Consult Factory
2.4 oz
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
Weight (approx.)
C-76
HAD SERIES - DUAL OUTPUT, 30 WATT
MODELS - (See the last page of this file for options.)
Vin
(Volts)
Vin Range
(Volts)
Iin Max.*
(Amps)
Vout
(Volts)
Iout Rated
(Amps)
Ripple & Noise
Pk-Pk (mV)
Efficiency
Typ. **
Model
24
48
18 - 36
34 - 75
2.24
1.15
5.0/3.3
5.0/3.3
6.0/7.5
6.0/7.5
75/75
75/75
78%
80%
HAD030TGE-A
HAD030ZGE-A
Denotes advanced product release. Consult factory for product availability.
* Maximum input current at minimum input voltage, maximum rated output power.
** At nominal Vin, rated output.
Note: Current can be drawn from either output to its maximum value, or from both outputs to a combined total of 30 Watts.
MECHANICAL DRAWING
Pin
Function
Thermal Impedance
Tolerances
1
-Vin
2
3
4
Case
On/Off
+Vin
Inches:
.XX ± 0.020
.XXX ± 0.010
(Milli
meters)
.X ± 0.5
.XX ± 0.25
Natural Convection
8.0 °C/W
6.8 °C/W
4.9 °C/W
3.6 °C/W
3.0 °C/W
100 LFM
200 LFM
300 LFM
400 LFM
5
+3.3Vout
Pin:
± 0.002
6
7
8
3.3V RETURN
3.3V Trim
+5Vout
± 0.05
Note:
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated for
specific application.
(Dimensions as listed unless otherwise
specified.)
9
10
5V RETURN
5V Trim
C-77
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that
you prefer and add them to the model number. Example ordering options are located below the
options table.
OPTION
Negative Logic
SUFFIX
APPLICABLE SERIES
REMARKS
N
HAS, HBD, HBS, HES, LES, QBS,
QES, TES, TQD
TTL “Low” Turns Module ON
TTL “High” Turns Module OFF
Lucent Compatible Trim
Terminal Strip
Trim
T
TS
1
HAS, HBD, HBS, HES, QBS, QES
XWS, XWD, XWT
IAS, LES
Enable
2
IAD, IAS, LES, SMS
IAS, LES
Trim and Enable
Current Share
Headerless
3
4
SMS
Y
Encapsulated EWS, IWS, OWS
PIN LENGTH AND HEATSINK
OPTIONS
Standard Pin Length is 0.180”
(4.6mm)
0.110” (2.8mm) Pin Length
0.150” (3.8mm) Pin Length
0.24” (6.1mm) Horizontal Heatsink
8
9
All Units (Except SMS)
All Units (Except SMS)
1H
All Units (Except DIP, SIP, and SM
Packages)
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
0.24” (6.1mm) Vertical Heatsink
1V
2H
2V
3H
3V
All Units (Except DIP, SIP, and SM
Packages)
0.45” (11.4mm) Horizontal
Heatsink
All Units (Except DIP, SIP, and SM
Packages)
0.45” (11.4mm) Vertical Heatsink
All Units (Except DIP, SIP, and SM
Packages)
0.95” (24.1mm) Horizontal
Heatsink
All Units (Except DIP, SIP, and SM
Packages)
0.95” (24.1mm) Vertical Heatsink
All Units (Except DIP, SIP, and SM
Packages)
Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and
0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
C105
相关型号:
©2020 ICPDF网 联系我们和版权申明