HAS030ZH-AT7 [BEL]
DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, PACKAGE-9;型号: | HAS030ZH-AT7 |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, PACKAGE-9 |
文件: | 总3页 (文件大小:82K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HAS30 DC-DC Series Data Sheet
Features
•
RoHS lead solder exemption compliant
• Industry standard half-brick
• Low-cost design
• 100 °C baseplate operation
• Open-frame packaging
• 24 V and 48 V input versions
• Input Pi filter
• Optional enable logic
• 1500 V isolation
Description
HAS dc-dc converters provide up to 30 watts of output power in an industry-standard package and footprint. With a
maximum case temperature of 100 °C, the HAS is well suited for the most demanding telecom, networking, and
industrial applications. The HAS features 1500 VDC isolation, short circuit, and overtemperature protection, as well
as six-sided shielding. The HAS series is available with optional enable and voltage trim pins. Please see the HAD
Series for dual-output applications.
Technical Specifications
Efficiency vs. Load (24V Input)
Input
Voltage Range
90
24 VDC Nominal
48 VDC Nominal
Transient
18 - 36 VDC
36 - 75 VDC
100V/100ms
50 mA
85
80
75
70
65
60
Reflected Ripple
HAS030YG-A
EFF. (18v)
EFF. (24v)
EFF. (36v)
Output
Setpoint Accuracy
Line Regulation V Min. - V Max., I
Load Regulation I
Remote Sense Headroom
Minimum Output Current
1ꢀ
Rated
0.2ꢀ V
in
out
in
Min. - I
out
Max., V Nom.
out
0.2ꢀ V
out
out
in
10
20
30
40
50
60
70
80
90
100
0.5 VDC
10 ꢀ
LOAD %
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
25ꢀ I
out
Efficiency vs. Load (48V Input)
4ꢀ V
out
500 µs
10ꢀ
95
90
85
80
75
70
65
60
55
50
Voltage Trim Range
Short Circuit / Overcurrent Protection
Current Limit Threshold Range, ꢀ of I
OVP Trip Range
Remote Shutdown Reference
Shutdown Pin Current, Sourced At Off
Hiccup
Rated
110 - 140ꢀ
out
115 - 140ꢀ V
Nom.
out
V Negative
in
10 mA Max.
HAS030ZH-A
HAS030ZG-A
HAS030ZJ-A
General
Turn-On Time
10 ms
Positive/Negative Logic
250 kHz
10
20
30
40
50
60
70
80
90
100
Remote Shutdown
Switching Frequency
Isolation
LOAD %
Notes
Input - Output
1500 VDC
1050 VDC
500 VDC
0.03ꢀ/°C
Input - Case
†
MTBF predictions may vary slightly from model to model.
Output - Case
Specifications typically at 25 °C, normal line, and full load, unless
otherwise stated.
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Soldering Conditions: I/O pins, 260 °C, ten seconds; fully compatible
with commercial wave-soldering equipment.
-40 To +100 °C
-40 To +125 °C
95ꢀ
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
Safety: Agency approvals may vary from model to model. Please
consult factory for specific model information.
5 g, 10 - 55 Hz
6
†
MTBF (Bellcore TR-NWT-000332)
2.5 X 10 hrs
Units are water-washable and fully compatible with commercial spray
or immersion post wave-solder washing equipment.
Safety
Weight (Approx.)
UL, cUL, TUV
1.4 oz
REV. FEB 01, 2006
Page 1 of 3
www.power-one.com
HAS30 DC-DC Series Data Sheet
Model Selection
INPUT VOLTAGE
INPUT VOLTAGE
RANGE (VOLTS)
MAXIMUM INPUT
CURRENT (AMPS)*
OUTPUT
VOLTAGE (VOLTS)
RATED OUTPUT
CURRENT (AMPS)
RIPPLE & NOISE
pk-pk (mV)
TYPICAL
EFFICIENCY**
MODEL
(VOLTS)
HAS030YG-A
HAS030YH-A
HAS030YJ-A
HAS030ZE-AT
HAS030ZG-A
HAS030ZH-A
HAS030ZJ-A
24
24
24
48
48
48
48
18-36
18-36
18-36
36-75
36-75
36-75
36-75
2.2
2.2
2.2
1.0
1.3
1.3
1.3
5
12
15
3.3
5
6.0
2.5
2.0
6.0
6.0
2.5
2.0
100
150
150
100
100
150
150
83ꢀ
87ꢀ
86ꢀ
81ꢀ
83ꢀ
88ꢀ
88ꢀ
12
15
NOTES:
*
Maximum input current at minimum input voltage, maximum rated output power.
** At nominal V , rated output.
in
Model numbers highlighted in yellow or shaded are not recommended for new designs.
Mechanical Drawing
MOUNTING INSERTS
M3X.5 THROUGH 4PL
2.28"
(57.9mm)
0.18"
(4.6mm)
1.700"(43.2mm)
1.400"(35.6mm)
1.000"(25.4mm)
5
1.400"(35.6mm)
1.000"(25.4mm)
1
2
DIA 0.040"
(1.0mm)
6
7
2.40
"
0.700"(17.8mm)
0.400"(10.2mm)
BOTTOM VIEW
(61.0mm)
0.400"(10.2mm)
0
3
4
8
9
0
-0.300"(-7.6mm)
-0.50"(-12.7mm)
-0.300"(-7.6mm)
0.025" REF.
(0.6mm)
0
1.900"
(48.3mm)
-0.19"
(-4.8mm)
0.50"
(12.7mm)
Tolerances
Pin
Function
Thermal Impedance
Inches:
.XX 0.020
.XXX 0.010
(Millimeters)
.X 0.5
.XX 0.25
1
-V
in
Case
On/Off
Natural Convection
100 LFM
200 LFM
300 LFM
400 LFM
7.9 °C/W
6.8 °C/W
4.9 °C/W
3.6 °C/W
3.0 °C/W
2
3
4
+V
in
Pin:
0.002
5
-V
0.05
out
6
7
8
9
-Sense
Trim
+Sense
Note:
Thermal impedance data is
dependent on many environmental
factors. The exact thermal
performance should be validated
for specific application.
(Dimensions as listed unless
otherwise specified.)
+V
out
NUCLEAR AND MEDICALAPPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components
in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective
divisional president of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
REV. FEB 01, 2006
Page 2 of 3
www.power-one.com
OPTIONS
Ordering Information
Suffix Code Identification:
Series Applicability:
HAS, HBD, HBS, HES, QBS, QES, TES, TQD
Features & Options
Descriptions
Suffix Code
Remote ON/OFF
Positive Logic
Negative Logic
None
N
Trim
Standard Power-One (Negative)
Industry-standard (Positive)
None
T
Pin Length
0.18” (4.6mm), standard model length None
0.145” (3.68mm)
0.110” (2.8mm)
7
8
Special Options
Customer-specific models
S#
NOTE: Contact factory for availability of specific options.
REV. FEB 01, 2006
Page 3 of 3
www.power-one.com
相关型号:
HAS030ZJ-ANT81V
DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, OPEN FRAME PACKAGE-9
BEL
HAS030ZJ-ANT82V
DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, OPEN FRAME PACKAGE-9
BEL
HAS030ZJ-ANT83V
DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, OPEN FRAME PACKAGE-9
BEL
©2020 ICPDF网 联系我们和版权申明