HBS050YH-AN2H [BEL]

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid;
HBS050YH-AN2H
型号: HBS050YH-AN2H
厂家: BEL FUSE INC.    BEL FUSE INC.
描述:

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid

文件: 总3页 (文件大小:86K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
ꢀꢀ  
ꢀꢀ  
(888) IPD-CONVerters  
(888) 473-2668  
www.ipdconverters.com  
HBS SERIES - 50 WATT  
DESCRIPTION  
FEATURES  
HBS DC/DC converters provide up to 50 Watts of  
output power in an industry standard half-brick footprint.  
The HBS units feature excellent efficiency, Class A  
conducted noise specs, and fixed switching frequency.  
The HBS, using open-frame packaging, along with planar  
magnetics provides maximum useable power with  
minimal thermal constraints. The HBS series is  
especially suited to telecom, networking, and industrial  
applications.  
• Industry Standard Half-  
Brick  
• Open-Frame Packaging  
• 100°C Baseplate  
Operation  
• Water Washable  
• “True-Trim” Option  
• 1500V Isolation  
• Positive Or Negative  
Logic  
Efficiency vs. Load (24V Input)  
95  
90  
85  
80  
75  
70  
65  
60  
TECHNICAL SPECIFICATIONS  
Input  
Voltage Range  
24 VDC Nominal  
48 VDC Nominal  
Reflected Ripple  
Input Reverse Voltage Protection  
HBS050YG-A  
HBS050YH-A  
HBS050YJ-A  
18 - 36 VDC  
34 - 75 VDC  
25 mA  
Shunt Diode  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
Output  
LOAD %  
Setpoint Accuracy  
±1%  
Line Regulation Vin Min. - Vin Max., Iout Rated  
±0.2% Vout  
Load Regulation Iout Min. - Iout Max., Vin Nom.  
Remote Sense Headroom  
±0.2% Vout  
0.5 VDC  
Efficiency vs. Load (48V Input)  
Minimum Output Current  
10%, Iout Rated  
95  
Dynamic Regulation, Loadstep  
25% Iout  
90  
85  
80  
75  
70  
65  
60  
Pk Deviation  
Settling Time  
Voltage Trim Range  
Short Circuit / Overcurrent Protection  
4% Vout  
500 µs  
±10%  
Hiccup  
HBS050ZG-A  
HBS050ZH-A  
HBS050Z10.5-A  
Current Limit Threshold Range, % of Iout Rated  
110 - 140%  
OVP Trip Range  
OVP  
115 - 140% Vout Nom.  
Hiccup  
General  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
Turn-On Time  
Remote Shutdown  
10 ms  
LOAD %  
Positive or Negative Logic  
Remote Shutdown Reference  
Switching Frequency  
Isolation  
Vin Negative  
500 kHz  
Notes  
Input - Output  
Input - Case  
Output - Case  
Temperature Coefficient  
Case Temperature  
Operating Range  
1500 VDC  
1050 VDC  
500 VDC  
0.2%/°C  
MTBF predictions may vary slightly from model to model.  
Specifications typically at 25°C, normal line, and full load, unless otherwise  
stated.  
-40 to +100°C  
-40 to +125°C  
105 to 115°C  
5 g, 10 - 55 Hz  
2.1 x 106 hrs  
UL, CUL  
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with  
commercial wave-soldering equipment.  
Storage Range  
Thermal Shutdown Range  
Vibration, 3 Axes, 5 Min Each  
MTBF(Bellcore TR-NWT-000332)  
Safety  
Safety: Agency approvals may vary from model to model. Please consult factory  
for specific model information.  
Units are water-washable and fully compatible with commercial spray or  
immersion post wave-solder washing equipment.  
Weight (approx.)  
2.5 oz  
1
HBS SERIES - 50 WATT  
MODELS - (See the last page of this file for options.)  
Vin  
(Volts)  
Vin Range  
(Volts)  
Iin Max.*  
(Amps)  
Vout  
(Volts)  
Iout Rated  
(Amps)  
Ripple & Noise  
Pk-Pk (mV)  
Efficiency  
Typ. **  
Model  
24  
24  
24  
24  
24  
48  
48  
48  
48  
48  
18 - 36  
18 - 36  
18 - 36  
18 - 36  
18 - 36  
34 - 75  
34 - 75  
34 - 75  
34 - 75  
34 - 75  
3.50  
2.30  
3.60  
3.50  
3.50  
1.32  
1.22  
1.80  
1.75  
1.75  
3.30  
3.30  
5.00  
12.00  
15.00  
3.30  
3.30  
5.00  
12.00  
15.00  
15.00  
10.00  
10.00  
4.20  
100  
100  
100  
150  
150  
100  
100  
100  
150  
150  
80%  
80%  
84%  
85%  
86%  
80%  
80%  
82%  
85%  
87%  
HBS050YE-A  
HBS033YE-A  
HBS050YG-A  
HBS050YH-A  
HBS050YJ-A  
HBS050ZE-A  
HBS033ZE-A †  
HBS050ZG-A  
HBS050ZH-A  
HBS050ZJ-A †  
3.30  
15.00  
10.00  
10.00  
4.20  
3.30  
† Denotes advanced product release. Consult factory for product availability.  
* Maximum input current at minimum input voltage, maximum rated output power.  
** At nominal Vin, rated output.  
MECHANICAL DRAWING  
Pin  
Function  
Thermal Impedance  
Tolerances  
Natural Convection  
6.6 °C/W  
5.7 °C/W  
4.2 °C/W  
3.1 °C/W  
2.6 °C/W  
Inches:  
.XX ± 0.020  
.XXX ± 0.010  
(Millimeters)  
.X ± 0.5  
.XX ± 0.25  
1
2
3
-Vin  
Case  
On/Off  
100 LFM  
200 LFM  
300 LFM  
400 LFM  
4
+Vin  
Pin:  
± 0.002  
5
6
7
8
-Vout  
-Sense  
Trim  
± 0.05  
Note:  
Thermal impedance data is dependent on  
many environmental factors. The exact  
thermal performance should be validated for  
specific application.  
( Dimensions as listed unless otherwise  
specified.)  
+Sense  
9
+Vout  
2
OPTIONS  
When ordering equipment options, use the following suffix information. Select the option(s) that  
you prefer and add them to the model number. Example ordering options are located below the  
options table.  
OPTION  
Negative Logic  
SUFFIX  
APPLICABLE SERIES  
REMARKS  
N
HAS, HBD, HBS, HES, LES, QBS,  
QES, TES, TQD  
TTL “Low” Turns Module ON  
TTL “High” Turns Module OFF  
Lucent Compatible Trim  
Terminal Strip  
Trim  
T
TS  
1
HAS, HBD, HBS, HES, QBS, QES  
XWS, XWD, XWT  
IAS, LES  
Enable  
2
IAD, IAS, LES, SMS  
IAS, LES  
Trim and Enable  
Current Share  
Headerless  
3
4
SMS  
Y
Encapsulated EWS, IWS, OWS  
PIN LENGTH AND HEATSINK  
OPTIONS  
Standard Pin Length is 0.180”  
(4.6mm)  
0.110” (2.8mm) Pin Length  
0.150” (3.8mm) Pin Length  
0.24” (6.1mm) Horizontal Heatsink  
8
9
All Units (Except SMS)  
All Units (Except SMS)  
1H  
All Units (Except DIP, SIP, and SM  
Packages)  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
0.24” (6.1mm) Vertical Heatsink  
1V  
2H  
2V  
3H  
3V  
All Units (Except DIP, SIP, and SM  
Packages)  
0.45” (11.4mm) Horizontal  
Heatsink  
All Units (Except DIP, SIP, and SM  
Packages)  
0.45” (11.4mm) Vertical Heatsink  
All Units (Except DIP, SIP, and SM  
Packages)  
0.95” (24.1mm) Horizontal  
Heatsink  
All Units (Except DIP, SIP, and SM  
Packages)  
0.95” (24.1mm) Vertical Heatsink  
All Units (Except DIP, SIP, and SM  
Packages)  
Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and  
0.95” vertical heatsink.  
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.  
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.  
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems,  
equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.  
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the  
date manufactured. Specifications are subject to change without notice.  
3

相关型号:

HBS050YH-AN81H

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-AN82V

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-AN83V

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-AN9

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-AN91V

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-AN93H

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-ANT

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-ANT1H

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-ANT2H

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-ANT2V

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-ANT3V

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL

HBS050YH-ANT81V

DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid
BEL