HZZ00112-G [BEL]
Board Euro Connector, 15 Contact(s), 2 Row(s), Female, Straight, Solder Terminal,;
| 型号： | HZZ00112-G |
| 厂家： | 
BEL FUSE INC. |
| 描述： | Board Euro Connector, 15 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, 连接器 |
| 文件： | 总10页 (文件大小：2696K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Cassette Style
Mating Connectors
Accessories
All 19" cassette style converters are equipped with either
H11, H15, H15S4, or H15S2 male connectors. Mating
female connectors are available as accessories. The
four H-type connector versions are especially designed
for power supply applications, capable of handling high
operating currents.
The connectors have an integrated code key system
allowing many coding possibilities. Converters with high
output current normally use two contacts in parallel to
keep the voltage drop across the connector low. In the
case of very high currents, the connectors are fitted with
round high current contacts.
Note:Parts ending with -G areRoHS-compliantfor all 6 substances.
Table of Contents
Description........................................................................................1
H11 Connectors ...............................................................................2
H15 Connectors................................................................................4
H15S4, H15S2 Connectors .............................................................6
Technical Data .................................................................................8
Code Key System.............................................................................8
Connector Retention Clips..............................................................10
Connector Retention Brackets CRB ................................................9
Cable Hood.....................................................................................10
Cage Clamp Adapter .....................................................................10
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
Cassette Style Mating Connectors
Accessories
H11 Connectors
This connector has 11 contacts in one vertical column, marked 2 to 32. Mating and mounting conditions are according to IEC 60603-2
and DIN 41612. The connector contacts are hard-silver plated and correspond to quality class 1, allowing for 500 mating cycles.
Note: H11 connectors (male version) are used in the converter series (case size): H (H02), M (M02), and PSL (L04).
Table 1: H11 Connector Survey
Female connector
(former designation)
Part number
Description of terminals
Fig.
Integrated
coding
EN 455545
STV-H11-F/CO
HZZ00101-G
HZZ001962
HZZ00104-G
HZZ00102-G
HZZ00103-G1
HZZ001993
HZZ001133
HZZ00111-G
Faston terminals 6.3 × 0.8 mm
2
2
3
4
5
5
5
5
yes
yes
yes
yes
yes
yes
yes
yes
STV-H11-FG/CO2
STV-H11-FS/CO-G
STV-H11-FSR/CO-G
STV-H11-FB/CO-G1
STV-H11-FBG/CO3
STV-H11-FBER/CO3
STV-H11-FP/CO
1
Faston terminals 6.3 × 0.8 mm, gold-plated contacts
Faston terminals 6.3 × 0.8 mm, solderable (short molding)
Screw terminals, 90°, 2.5 mm2 (AWG 13), torque ≤ 26.6 Ncm
Solder pin 5.2 mm, Ø 1.6 mm
yes4
Solder pin 5.2 mm, Ø 1.6 mm, gold-plated contacts
Solder pin 4.3 mm, Ø 1.0 mm
Press fit 6.5 mm, Ø 1.0 mm
See also matching Flexi-PCB (HZZ01208-G) for PCB-mounting of converters, fig. 6.
Obsolete; use HZZ00101-G or HZZ00104-G !
Obsolete; use HZZ00103-G !
2
3
4
Material LPC E130i
Obsolete
Preferred for new designs
Mechanical Dimensions (in mm)
95
90
European
Projection
10 x 7.62 = 76.2
7.62
84.8
Fig. 1
H11 front view, relating to figures 2 to 5
Coding wedge
4
12043a
K
I
H
G
F
K
I
H
G
F
2
5
8
11 14 17 20 23 26
32
2
Fig. 2
Fig. 3
HZZ00101-G (STV-H11-F/CO), faston terminals 6.3 × 0.8 mm
HZZ00196 (STV-H11-FG/CO), faston terminals 6.3 × 0.8
mm with gold plated contacts; Obsolete
HZZ00104-G (STV-H11-FS/CO),
faston terminals 6.3 × 0.8 mm, solderable (short molding)
tech.support@psbel.com
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
© 2018 Bel Power Solutions & Protection
Page 2 of 10
Cassette Style Mating Connectors
Accessories
12045a
12044
5.08
2
5
8
11 14 17 20 23 26 29 32
K
I
H
G
F
2
5
8
11 14 17 20 23 26 29 32
2.8ꢁ0.1
5.63
ꢀ
10 x 7.62 = 76.2
90ꢁ0.1
Footprint for PCB-layout
Fig. 4
Fig. 5
HZZ00102-G (STV-H11-FSR/CO), screw terminals,
max. 2.6 mm2 (AWG 13), max torque 26.6 Ncm.
HZZ00103-G (STV-H11-FB/CO), solder pins, X = 5.2, Y = Ø 1.6
HZZ00199 (STV-H11-FBG/CO), solder pins, X = 5.2, Y = Ø 1.6,
Obsolete
HZZ00113 (STV-H11-FBER/CO), solder pins, X = 4.3, Y = Ø 1.0,
Obsolete
HZZ00111-G (STV-H11-FP/CO), press insert pins, X = 6.5, Y = Ø 1.0
Flexible H11 PCB
If cassette style converters with H11 male connectors are mounted on a PCB board, the connection can be made using the H11
flexible PCB (fig. 6) together with the female connector HZZ00103-G.
Part number:
HZZ01208-G
12034
7.62
3.81
83.82
Fig. 6
Flexible H11 PCB board HZZ01208-G
tech.support@psbel.com
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
© 2018 Bel Power Solutions & Protection
Page 3 of 10
Cassette Style Mating Connectors
Accessories
H15 Connectors
This connector has 15 contacts in two vertical columns, marked with 4 to 32 and is designed to meet DIN 41612. The connector
contacts are hard-silver plated and correspond to quality class 1, allowing for 500 mating cycles.
Note: This connector type fits for the following converter series: Q, P1, LPC, PSK1, PSS, K1, S, T, R.
1
Some models exhibit connectors equipped with 2 of 4 high-current contacts. See H15S4, H15S2 Connectors.
Table 2: H15 Connector Survey
Female connector
(former designation)
Part number
Description of terminals
Fig.
Integrated
coding
EN 455545
STV-H15-FSR-G
STV-H15-F/CO-G
STV-H15-FB/CO
STV-H15-FBG/CO1
STV-H15-FWS/CO
STV-H15-FP/CO
HZZ00107-G
HZZ00106-G
HZZ00112-G
HZZ001971
HZZ00114-G
HZZ00117-G
HZZ00118-G
Screw terminals, 90°, 2.5 mm2 (AWG 13), torque ≤ 26.6 Ncm
Faston terminals 6.3 × 0.8 mm
8
yes
yes
yes
yes
yes
yes
no
yes3
2
(8)
9a
9a
9b
9c
10
Solder pins 4.0 mm, Ø 1.6 mm
Solder pins 4.0 mm, Ø 1.6 mm, gold-plated contacts
Solder pins 10.1 mm, Ø 1.6 mm, 90° bent contacts
Press fit 4.5 mm, square 0.6 mm (double-pin version)
Cage clamp contacts, wire gauge Ø 0.14 – 1.5 mm
H15 cage clam
1
Obsolete; use HZZ00112-G !
The identical connector Harting 09 06215 2871 2222 complies with EN 45545 and NF-F16 (F1/I2)
Material LPC E130i
2
3
Obsolete
Preferred for new designs
Mechanical Dimensions (in mm)
95
90
European
Projection
12046
Fig. 7
H15 front view, relating to the next figures
12047
1.9
95
12.4
84.9
12039b
2.8
1.6
5.08
4
32
84
14.8
8.17
32
14 × 5.08 = 71.12
90
access screws M2 -15
Footprint for PCB-layout
4
Fig. 8
Fig. 9a
HZZ00107-G: screw terminals, max. torque 26.6 Ncm,
material LPC E130i
HZZ00112-G
solder pins, foot print.
HZZ00106-G: faston terminals 6.3 × 0.8 mm (similar
dimensions, but not shown). The orientation of the faston
terminals can be horizontal or vertical, depending on supplier.
HZZ00197
solder pins, foot print, Obsolete
tech.support@psbel.com
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
© 2018 Bel Power Solutions & Protection
Page 4 of 10
Cassette Style Mating Connectors
Accessories
ꢀM074
2.8
1.6
12053a
5.08
2
d
min.
10.1
32
4
7.62
14 x 5.08
32
z
3.5
6
88.9
8.17
15 × 5.08 = 76.2
90
Footprint for PCB-layout
Fig. 9b
Fig. 9c
HZZ00114-G
HZZ00117-G
solder pins for PCB mounting
press fit pins, foot print
View X
European
Projection
32 28 24 20 16 12
8
4
JM240
z
d
30 26 22 18 14 10
6
X
84.8
ꢀM243
Z
84.0
94.75
7 x 10.16 (= 71.12)
3.81
10.16
ꢀM241
10.16
1.27
6 x 10.16 (= 60.96)
Fig. 10
HZZ00118-G, cage clamp connector, wire gauge∅ 0.14 – 1.5 mm
tech.support@psbel.com
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
© 2018 Bel Power Solutions & Protection
Page 5 of 10
Cassette Style Mating Connectors
Accessories
H15S4, H15S2 Connectors
These special connectors derive from the H15 connectors having standard contacts like the standard connectors, combined with
4 (H15S4) or 2 (H15S2) high-current contacts (jacks) according to DIN 41626. These jacks are designed to handle currents up to
40 A. They correspond to quality class 2, allowing for 400 mating cycles. The contact material is high-quality Phosphor Bronze.
The high-current jacks are joined separately to the connectors. To install them, carefully follow the assembly instructions. It is
extremely important to solder cables, screw cable terminals or heat shrink sleeves to high-current jacks first, before inserting them
into the moulding. Paralleled converters should preferably be interconnected on current bars or at a star point.
Using screw versions, the two outer high-current jacks may be inserted at a 90° angle in order to prevent possible short circuits
between the cable terminals, especially in applications with high vibration environment. Heat shrink sleeves might be necessary
for further isolation purposes or to keep clearances and creepage distances at specified levels.
An extraction tool allows removal of the high-current jacks for replacement (see fig. 16).
Caution: The use of an adequate cable strain relief device (e.g. Cable Hood etc.) is essential, in order to protect the high-current contact jacks
from damage. Do not screw, solder or manipulate these contacts, when the connector is plugged into the male connector! The use of highly
flexible cables is strongly recommended.
Note: H15S4 connectors (male version) are used in the following converter series (case size): K, PSK with line currents ≥20 A.
Note: H15S2 connectors (male version) are used in the following converter series (case size): P1000, K4000 with line currents ≥20 A. H15S2
connectors are not for new designs. Please consult the product data sheets for replacing models.
Table 3: H15S2 and H15S4 connector survey
Female connector
(former designation)
Part number
Description of terminals
Fig.
Integrated
coding
STV-H15S2-FSF/CO3
STV-H15S2-F/CO3
STV-H15S4-FSF/CO
STV-H15S4-F/CO
HZZ001163
HZZ001153
HZZ00110-G
HZZ00105-G
HZZ00109
11 faston terminals 6.3 × 0.8 mm, 2 screw jacks1
12 + 11b
(12) + 11a
14
yes
yes
yes
yes
yes
yes
11 faston terminals 6.3 × 0.8 mm, 2 solder jacks1
7 faston terminals 6.3 × 0.8 mm, 4 screw jacks1
7 faston terminals 6.3 × 0.8 mm, 4 solder jacks1
(14)
STV-H15S4-FLS/CO2
7 screw terminals 90°, 2.5 mm2, torque ≤ 26.6 Ncm, 4 solder jacks1
7 screw terminals, 90°, 2.5 mm2, torque ≤ 26.6 Ncm, 4 screw jacks1
15
STV-H15S4-FSR/CO2
HZZ00108
(15)
1
Spare jacks are available on request: screw version YVM002-G, solder version XMB045; see fig. 11a and 11b.
Obsolete; use female connectors with faston terminals instead!
H15S2 connectors are not for new designs.
2
3
Delivery content: H15S4 (S2) molding, 4 (2) high current jacks and assembly instructions. Screw versions also include four M4 screws with
washers and heat shrink sleeves.
Fig. 11a
Fig. 11b
Solder jack XMB045
Screw jack YVM002-G for screws M4.
Mechanical Dimensions (in mm)
95
90
32 28 24 20 16 12
12054b
30 26 22 18 14
84.9
8/10 4/6
Fig. 12
13
HZZ00116 (STV-H15 S2-FSF/CO)
11 faston terminals and two screw jacks.
HZZ00115 (STV-H15 S2-F/CO)
11 faston terminals and two solder jacks
(solder jacks are shown in fig. 15).
tech.support@psbel.com
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
© 2018 Bel Power Solutions & Protection
Page 6 of 10
Cassette Style Mating Connectors
Accessories
95
90
84.9
12.4
12040
12048a
24
20
16
12
30/32 26/28
Fig. 13
22
18
14
8/10 4/6
Ø 3.5
40.5
14.8
H15S4 front view, relating to figures below
Fig. 15
12.4
84.9
HZZ00109 (STV-H15 S4-FLS/CO), Obsolete ,
7 screw terminals (max torque 26.6 Ncm) and 4 solder jacks
12049
HZZ00108 (STV-H15 S4-FSR/CO), Obsolete, 7 screw
terminals (max torque 26.6 Ncm) and 4 screw jacks (screw
jacks, fig. 11b, are shown in fig. 14)
7.6
4
The connectors shown in fig. 15 with 7 screw terminals are
obsolete. Use connectors with 7 faston terminals instead,
HZZ00110-G or HZZ00105-G; see fig. 14.
41.6
13
Fig. 14
HZZ00110-G (STV-H15 S4-FSF/CO),
7 faston terminals and 4 screw jacks
HZZ00105-G (STV-H15 S4-F/CO),
7 faston terminals and 4 solder jacks (solder jacks, fig. 11a,
are shown in fig. 15)
Extraction Tool for High Current Contacts
High current plugs and jacks can be disassembled from the molding by means of a special extraction tool (H15S2 and H15S4
connectors). Holding the extraction tool over the center of the connector's female contact the outer part of the extraction tool should
be fed between the molding and the outside of the female contact itself. This releases the spring clip fixing the contacts, in order to
pull the contacts out of their molding for replacement. If the operation is performed correctly, very little force is required. Extreme
care should be taken since incorrect procedure and excessive force could damage the tool and/or the connector.
This tool is available as an accessory for high-current solder and high-current screw contacts.
Note: In order to avoid damage, never manipulate high-current contacts when plugged-in!
Part number:
Description:
HZZ00150-G
Extraction tool
Fig. 16
Extraction tool HZZ00150-G
tech.support@psbel.com
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
© 2018 Bel Power Solutions & Protection
Page 7 of 10
Cassette Style Mating Connectors
Accessories
Technical Data of Connectors
Table 4: Connector data
H15S2 / H15S4
High current
Mechanical Data
H11
H15
Fastons
Number of poles
11
15
11/7
2/4
Mating cycles
500
80 N
500
90 N
400
Insertion/withdrawal forces max.
Electrical data
90 N
10 /1.6 N
Clearances and creepage distances contact to ground
Clearances and creepage distances between contacts
Test voltage
≥ 4.5 mm
≥ 8.0 mm
3100 VAC
500 VAC
20 A
≥ 4.5 mm
≥ 8.0 mm
3100 VAC
500 VAC
15 A
≥ 4.0 mm
≥ 4.0 mm
3100 VAC
500 VAC
Operation voltage
TA = 20 °C
15 A
12 A
40 A
35 A
Operation current per contact
TA = 70 °C
TA = 95 °C
17 A
12 A
14 A
9 A
9 A
25 A
Contact resistance
≤8 mΩ
≤8 mΩ
≤8 mΩ
≤1 mΩ
Insulation resistance at 100 VDC
Miscellaneous data
Operating temperature
Contact surface
≥1000 MΩ
≥1000 MΩ
≥1000 MΩ
– 55 to 125 °C
– 55 to 125 °C
Ag over Ni
–55 to 105 °C
6 μ Ag
6 μ Ag over 2 μ Ni
0.8 μ Au over 2 μ Ni
PBTP black
Crastin SK 645FR
(E41938)
PA, NFF16: I2/F1
(formerly Arnite
TV4 264 SN)
Lyquid Cristal Polymer E130i, NFF16: I3/F2
Molding material of the female connector
(not all models)
(former material: Glass filled PBT)
UL 94 V-0 / UL
94 V-1
Flammability
UL 94 V-0
UL 94 V-0
Code Key System
An efficient coding system is of great importance in complex electronic systems. Since power supplies handle high currents and
voltages, any false connection could be dangerous and quite costly.
This integrated polarizing system allows effortless coding by the simple insertion of coding wedges (HZZ00202-G) into the female
connector moldings. The corresponding counter-parts, i.e. the coding tabs of the male molding, just have to be broken off to match
the right female part. Major advantages are high mechanical stability and easy handling. The H11 connectors have 10 and the
H15 connectors 8 coding positions. The use of coding wedges allows for many different coding possibilities. Coding wedges are
available as accessories to female connectors; see fig. 17.
8
2
5
11
14
17
20
23
26
29
32
K
I
H
G
F
Coding tab
4
Coding wedge
K
I
H
G
D
F
E
2
5
8
11
14
17
20
23
26
29
32
A
B
C
Bottom side:
Fig. 17
Fig. 18
Integrated code key system (H11 connector)
Integrated code key system for a H11 connector
tech.support@psbel.com
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
© 2018 Bel Power Solutions & Protection
Page 8 of 10
Cassette Style Mating Connectors
Accessories
Connector Retention Clips
The retention clip V is an accessory, which guarantees secure connection even under severe vibration, as for example in mobile
applications. One connector retention system fits to almost all converters and all of the mentioned connector types.
The following converter series are delivered with pre-punched holes in the back plate for fast field-mounting of retention clips:
Note: HZZ01209-G fits for H, M, K, S, PSK, PSS, R, T Series.
HZZ01229-G fits for Q, P, HP Series only in combination with HZZ01215-G (Mounting Plate Q).
Part number:
Description:
HZZ01209-G
Retention clip (2x)
HZZ01229-G
Retention clip (2x) Q, P
Delivery content: 2 pcs. in a plastic bag 2 pcs. in a plastic bag
Connector retention clips (unlocked)
Connector retention clips (locked)
Fig. 19
Pair of Connector retention clips HZZ01209-G and their application
Connector Retention Brackets
An alternative to the above mentioned retention clip V is the connector retention bracket. They are attached to the back plate by
one screw each with a torque of 20 to 30 Ncm.
Table 5: Connector Retention Bracket Survey
Series
Par number description Delivery content
K, R, S,
HZZ01216-G
CRB-HKMS
2 brackets, 2 screws,
2 washers
PSK, PSS,
H, M, T
HZZ01217-G
2 brackets, 2 screws,
2 washers, 2 springs
Q, P, HP
CRB-Q
Fig. 20
Connector retention brackets HZZ01216-G (left-hand side)
and HZZ01217-G (right-hand side)
tech.support@psbel.com
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
© 2018 Bel Power Solutions & Protection
Page 9 of 10
Cassette Style Mating Connectors
Accessories
Cable Hood
A cable connector housing (cable hood) is available for all female H15, H15S2, and H15S4 type connectors with faston terminals
(not suitable for screw terminals). It serves as a strain relief, isolates connections, and protects cables.
Part number:
Description:
Delivery content:
HZZ00141-G
Cable hood for H15, H15S2, H15S4
Connector housing, blanc label
for K, S, R, T, PSK, PSS Series converters, the cable hood can be fixed to the converter case with a pair of U-shaped cable
hood retention brackets; see fig. 21.
Retention brackets: HZZ01218-G
Delivery content:
2 brackets XMK187-G
2 screws XMM003-G (M2.5 x 6)
Install. instruction BZM20006, blank label.
For fixing the cable hood with a pair of retention clips HZZ01209-G, a special version HZZ00142-G is available, where both sides
of the cable hood are slightly modified in order to allow for insertion of the clips. The cable hood fixed with the clips has been tested
to withstand vibrations as per IEC/EN 60068-2-6: 5 g, 7.5 h (2.5 h per axis). See fig. 22.
Part number:
Description:
Delivery content:
HZZ00142-G
Cable hood for H15/H15S2/H15S4
Connector housing, blanc label
20.2
European
Projection
Modiꢀcation for use with retension clip
110
Fig. 21
Fig. 22
Cable hood HZZ00141-G fixed with retention brackets
HZZ01218-G
Cable hood HZZ00142-G for fastening with retention clips
HZZ01209-G
A metallic version of the cable hood provides fire protection; see fig. 23
Part number:
Description:
HZZ00143-G
Metallic cable hood for H15/H15S2/S4
Delivery content:
Connector housing, blanc label
ꢀM242
15
17
(34.7)
(65.9)
Fig. 23
Fig. 24
Metallic cable hood HZZ00143-G providing fire protection
Cage clamp adapter HZZ00144-G
Cage Clamp Adapter
The adapter HZZ00144-G allows for connecting a converter with cage clamp technique; see fig. 24 above.
NUCLEAR AND MEDICAL APPLICATIONS - These products are not designed or intended for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
tech.support@psbel.com
belfuse.com/power-solutions
BCD20022 Rev AJ, 05-Dec-2018
© 2018 Bel Power Solutions & Protection
Page 10 of 10
相关型号：
HZZ00114-G
Board Euro Connector, 15 Contact(s), 2 Row(s), Female, Right Angle, Solder Terminal, ROHS COMPLIANT
BEL
©2020 ICPDF网 联系我们和版权申明