M24308/4-2F [BEL]
D Subminiature Connector,;
| 型号： | M24308/4-2F |
| 厂家： | 
BEL FUSE INC. |
| 描述： | D Subminiature Connector, 连接器 |
| 文件： | 总51页 (文件大小：4444K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
INDUSTRIAL
D-Subminiature
Connectors Catalog
belfuse.com/cinch
D-SUBMINIATURE CONNECTORS INFORMATION
INDUSTRIAL
Introduction
The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in
computer, telecom, datacom, medical, and test instrumentation applications as well as in the military and
aerospace fields.
Types of D-subminiature connectors manufactured by Cinch
ꢀ Printed Circuit Board connectors:
• Vertical connectors for panel mounting with Dip Solder PC tails.
• Right-Angle connectors for board mounting with Dip Solder PC tails.
ꢀ Connectors for cable assemblies or wire harnesses:
• Crimp and Poke.
• Solder Cup.
• Insulation Displacement (IDC) to terminate discrete wire.
• Wire Wrap.
How to read this section
ꢀ The information pages provide standard data common to all D-subminiature connectors. These include:
•
•
•
•
D-subminiature contact arrangements - see page 4.
Panel mounting specifications/hardware - see page 5.
D-subminiature shell dimensions - see page 6.
PCB thickness chart and PCB layout dimensions - see page 7.
ꢀ D-subminiature pages are grouped by series. A series is a family of connectors with a similar performance level.
Each series shares a set of features and specifications, from economical and commercial grade product to high-
reliability and military connectors. Each series begins with a page outlining general features and specifications of
connectors, followed by the pages on individual connectors with drawings or features specific to that connector.
Drawings reflect clarifications of dimensions not called out in the information pages of this catalog.
ꢀ Accessories including backshells, junction shells, and hoods as well as hardware can be found on pages 34 thru
50.
ꢀ Termination tooling for Cinch connectors can be found at the end of the D-subminiature catalog.
2
D-SUBMINIATURE CONNECTORS INFORMATION
INDUSTRIAL
Introduction
General Information
ꢀ All connectors are intermateable with any Cinch D-subminiature of comparable pin count and density, or the
D-sub connector of any other manufacturer complying dimensionally with MIL-C-24308.
ꢀ Solder terminations and boardlocks meet the requirements for solderability in accordance with MIL-STD-202,
Method 208.
ꢀ DURABILITY
• Mated connectors are subjected to cycles of insertions and withdrawals specified on the catalog page. After the prescribed
cycles the connectors will meet the Cinch requirements concerning insertion withdrawal force, individual contact insertion-
withdrawal force, and contact resistance.
ꢀ APPROVALS
• Most Cinch connectors have UL recognition and CSA approval; however, the specific approvals are listed on the individual
catalog pages.
ꢀ CONTACTS
• Cinch connector contacts are generally offered in Gold Flash or 30μin. gold plating for commercial product, and 50μin. gold
plating for M24308 Series Military D-subminiature connectors.
• Cinch connectors utilize economical stamped and formed contacts and/or screw machine contacts for enhanced perfor-
mance.
• Standard density connectors utilize size 20 contacts.
ꢀ METAL SHELLS
• Commercial-grade steel shells are usually available in zinc plating with yellow or clear chromate finish or tin plating.
• Tin-plated plugs have grounding indents.
• Military grade M24308 Series connector shells are generally steel cadmium plating and yellow chromate finish.
• Insulator materials are glass-filled polyester, glass-filled nylon, and diallyl phthalate.
ꢀ The connectors are usually available in plugs and sockets in 9, 15, 25, 37, and 50 position sizes.
belfuse.com/cinch
3
D-SUBMINIATURE CONNECTORS INFORMATION
INDUSTRIAL
Introduction
Printed Circuit Board Connectors
ꢀ Cinch provides connectors in various footprints, contact diameters, and lengths in both vertical and right-angle
PC mount styles with dip solder tails.
ꢀ Cinch PCB connectors have metal shells.
Connectors for Terminating Cable Wire
ꢀ Wire Wrap connectors are available in two tail lengths for two-wrap and three-wrap terminations. The contact is
terminated by wrapping wire around it using a wire wrap gun. This connector is especially useful for prototyping
since the wire can be unwrapped and rewrapped if necessary.
ꢀ Solder Cup connectors allow reliable long-term termination by soldering the wire directly into the connector
contact. Cinch Solder Cups accommodate up to 20 AWG wire.
ꢀ Crimp and Poke connectors allow the wire to be terminated more economically than wire wrap or solder cup
styles. Contacts are crimped and inserted into the connector. In our D*U Series, the contact is crimped around
the conductor wire. Crimp and Poke connectors can be selectively loaded to save labor and material cost.
Contact Arrangements
Standard Density Plug Inserts
4
D-SUBMINIATURE CONNECTORS INFORMATION
INDUSTRIAL
Introduction
Shells and Mounts
Panel Mounting Specifications
Dimensions
Mounting Method
Shell Positions Front/Rear
A
B
C
D
E
F
H
Size
Panel
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
E
9
Front
Rear
0.98 24.89 0.49 12.45 0.87 22.10 0.44 11.18 0.51 12.95 0.26
0.98 24.89 0.49 12.45 0.81 20.57 0.40 10.16 0.45 11.43 0.23
6.60
5.84
0.08
0.13
2.03
3.30
A
B
C
D
15
25
37
50
Front
Rear
1.31 33.27 0.66 16.76 1.10 27.94 0.60 15.24 0.51 12.95 0.26
1.31 33.27 0.66 16.76 1.13 28.70 0.57 14.48 0.45 11.43 0.23
6.60
5.84
0.08
0.13
2.03
3.30
Front
Rear
1.85 46.99 0.93 23.62 1.74 44.20 0.87 22.10 0.51 12.95 0.26
1.85 46.99 0.93 23.62 1.67 42.42 0.84 21.34 0.45 11.43 0.23
6.60
5.84
0.08
0.13
2.03
3.30
Front
Rear
2.50 63.50 1.25 31.75 2.39 60.71 1.20 30.48 0.51 12.95 0.26
2.50 63.50 1.25 31.75 2.33 59.18 1.16 29.46 0.45 11.43 0.23
6.60 0.08
5.84 0.13
2.03
3.30
Front
Rear
2.41 61.21 1.20 30.48 2.30 58.42 1.15 29.21 0.62 15.75 0.31
2.41 61.21 1.20 30.48 2.22 56.39 1.11 28.19 0.56 14.22 0.28
6.60 0.08
5.84 0.13
2.03
3.30
PANEL MOUNTING HARDWARE: Aids in alignment of plug and receptacle.
Float Bushing
4-40 Clinch Nut
Rear panel mounting
Rear panel mounting
belfuse.com/cinch
5
D-SUBMINIATURE CONNECTORS INFORMATION
INDUSTRIAL
Introduction
Shells and Mounts
Mating side
Termination Side
A
.ꢀ015
B
.ꢀ0ꢀ5
B0 .ꢀꢀ15
(ꢀ.03mm)
C
.ꢀꢀ15
D
.ꢀ0ꢀ5
D0 .ꢀ0ꢀ5
(ꢀ.21mm)
E
.ꢀ0ꢀ5
(ꢀ.38mm)
(ꢀ.21mm)
(ꢀ.03mm)
(ꢀ.21mm)
(ꢀ.21mm)
Shell Positions Connector
Size
Type
in
mm
in
mm
--
in
mm
in mm
in
mm
in
mm
in
mm
E
9
Plug
Socket
1.213 30.81
1.213 30.81 .640 16.26
--
.666 16.90 0.984 24.99
-- --
--
--
7.82
.329
--
8.40
--
.494 12.55
.494 12.55
0.984 24.99 .308
A
B
C
D
15
25
37
50
Plug
Socket
1.541 39.14
1.541 39.14 .968 24.59
--
--
.994 25.30 1.312 33.32
-- -- 1.312 33.32 .308
--
--
7.82
.329
--
8.40
--
.494 12.55
.494 12.55
Plug
Socket
2.088 53.04
2.088 53.04 1.508 38.30
--
--
1.534 39.00 1.852 47.04
-- 1.852 47.04 .308
--
--
7.82
.329
--
8.40
--
.494 12.55
.494 12.55
Plug
Socket
2.729 69.32
2.729 69.32 2.156 54.76
--
--
2.182 55.40 2.500 63.50
-- -- 2.500 63.50 .308
--
--
7.82
.329
--
8.40
--
.494 12.55
.494 12.55
Plug
Socket
2.635 66.93
2.635 66.93 2.062 52.34
--
--
2.079 52.80 2.406 61.11
--
--
.436 11.07 .605
--
15.37
15.37
--
--
2.406 61.11 .420 10.67
--
.605
G
.ꢀ0ꢀ5
H
.ꢀ0ꢀ5
J
.ꢀ0ꢀ5
K
.ꢀꢀ15
L
.ꢀ0ꢀ5
M
.ꢀ0ꢀ5
(ꢀ.21mm)
(ꢀ.21mm)
(ꢀ.21mm)
(ꢀ.21mm)
(ꢀ.21mm)
(ꢀ.21mm)
Shell Positions Connector
Size
Type
in mm
in mm
in mm
in
mm
in
mm
in
mm
E
9
Plug
Socket
.759 19.28 .422 10.72 0.30
.759 19.28 .422 10.72 0.30
0.76
0.76
.236
.243
5.99
6.17
0.45
0.45
1.14
1.14
.422 10.72
.429 10.92
A
B
C
D
15
25
37
50
Plug
Socket
1.083 27.51 .422 10.72 0.30
1.083 27.51 .422 10.72 0.30
0.76
0.76
.236
.236
5.99
6.17
.045
.045
1.14
1.14
.422 10.72
.429 10.92
Plug
Socket
1.625 41.27 .422 10.72 0.39
1.625 41.27 .422 10.72 0.30
0.99
0.76
.231
.243
5.87
6.17
.060
.045
1.52
1.14
.426 10.82
.429 10.92
Plug
Socket
2.272 57.71 .422 10.72 0.39
2.272 57.71 .422 10.72 0.30
0.99
0.76
.231
.243
5.87
6.17
.060
.045
1.52
1.14
.426 10.82
.429 10.92
Plug
Socket
2.178 55.32 .534 13.56 .039
2.178 55.32 .534 13.56 .030
0.99
0.76
.231
.243
5.87
6.17
.060
.045
1.52
1.14
.426 10.82
.429 10.92
6
D-SUBMINIATURE CONNECTORS INFORMATION
INDUSTRIAL
Introduction
Printed Circuit Board Layout Hole Dimensions
Standard Density D-subminiature
Mounting Dimensions Board Layouts
Footprints (Component side shown)
9 Position
Shell Size E
25X
25 Position
Shell Size B
PC Board Lead Hole Size
Terminal
in
Dia.
mm
Hole Dia.
in
mm
15X
.ꢀ4ꢀ
1.02
0.76
.055
.045
.039
1.40
1.14
0.99
.ꢀ3ꢀ
15 Position
Shell Size A
.ꢀ24-.ꢀ21
0.61-0.64
The footprints on this page are standard for all metal shell D-subminiature connectors.
On all right-angle D-subminiature connectors, the short row of contacts is positioned closest to the edge
of the board.
belfuse.com/cinch
7
D-SUBMINIATURE CONNECTORS INFORMATION
Introduction
INDUSTRIAL
Printed Circuit Board Layout Hole Dimensions
Standard Density D-subminiature
Mounting Dimensions Board Layouts
Footprints (Component side shown)
37 Position
Shell Size C
50 Position
Shell Size D
PC Board Lead Hole Size
The footprints on this page are standard for all metal shell
D-subminiature connectors.
Terminal
in
Dia.
mm
Hole Dia.
in
mm
.ꢀ4ꢀ
1.02
0.76
.055
.045
.039
1.40
1.14
0.99
On all right-angle D-subminiature connectors, the short row
of contacts is positioned closest to the edge of the board.
.ꢀ3ꢀ
.ꢀ24-.ꢀ21
0.61-0.64
8
D-SUBMINIATURE METAL SHELL CRIMP AND POKE
INDUSTRIAꢀ
Features
ꢀ Offered in 9, 15, 25, 37, and 50 position plugs and sockets
ꢀ Available with gold flash or 30μin. gold plating.
ꢀ Offered with 0.120 mounting holes and optional 4-40 clinch nuts.
ꢀ Approvals:
• UL Recognized - Files E170218 (UL1977) and E130965 (UL1863).
• CSA Approved - File LR31996.
ꢀ See pages 5-6 for standard dimensions, contact arrangements, and panel mounting specifications.
Materials
Insulator Material
Connector Shell
Glass-filled nylon (black), UL 94 V-O rated
Steel with zinc plating and yellow chromate finish or clear for RoHS
or tin plating (grounding indents on plug)
4-4ꢀ Clinch Nut
Steel with cadmium plating and yellow chromate finish
Stainless steel, passivated
Dual Float Bushing
Environmental
Operating Temperature
Shock
-65°C to +105°C
50G peak per MIL-STD-202, Method 213, Condition G
Vibration
12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-
STD-202, Method 204, Condition D
Moisture Resistance
90-95% relative humidity @ 40ºC for 96 hours per MIL-STD-202,
Method 103
Electrical
Withstanding Voltage
Minimum 1000V RMS @ sea level
5 Amps
Current Rating
Contact Resistance
Insulation Resistance
2.7 milliohms maximum
5000 megohms minimum (initial); 1000 megohms (minimum) after
environmental testing
Mechanical
Individual Contact Insertion 0.7 oz. minimum/12oz. maximum
and Separation Force
Durability
500 mating cycles
belfuse.com/cinch
9
D-SUBMINIATURE METAL SHELL CRIMP AND POKE
D*U SERIES
INDUSTRIAꢀ
INDUSTRIAL
ꢀ Machined contacts supplied loose with connector or can be ordered separately. Use with 20-24 AWG wire.
Materials
Contact Material
Plug - Brass (stamped) or copper alloy (machined). Socket - Phosphor bronze (stamped) copper alloy
(machined).
Contact Plating
Machined Plugs and Sockets: Golf flash or 30μin. gold. All over nickel
Termination Tooling
ꢀ Contact Insertion/Extraction: #CIET-20-HDB. See page 51.
ꢀ Loose Contact Crimp Tool:
Machined Contact - #M22520/2-01. See page 51.
For Positioner as required - EP-580. See page 51.
10
D-SUBMINIATURE METAL SHELL CRIMP AND POKE,
D*U SERIES
INDUSTRIAꢀ
INDUSTRIAL
Ordering Information
D*U Crimp and Poke Plugs
Zinc-Plated Shell with Chromate FInish
Yellow Chromate
Mounting Holes 4-4ꢀ Clinch Nuts
RoHS Compliant with Clear Chromate
Mounting Holes
4-4ꢀ Clinch Nuts
Positions
Contacts
Included
Without
Contacts
Contacts
Included
Without
Contacts
Contacts
Included
Without
Contacts
Contacts
Included
Without
Contacts
9
DEU-9P
DAU-15P
DBU-25P
DCU-37P
DDU-50P
DEU-9P-FO
DAU-15P-FO
DBU-25P-FO
DCU-37P-FO
DDU-50P-FO
DEUE-9P
DAUE-15P
DBUE-25P
DCUE-37P
DDUE-50P
DEUE-9P-FO
DEUH-9P
DEUH-9P-FO
DEUEH-9P
DAUEH-15P
DBUEH-25P
DCUEH-37P
DDUEH-50P
DEUEH-9P-FO
DAUEH-15P-FO
DBUEH-25P-FO
DCUEH-37P-FO
DDUEH-50P-FO
01
21
37
1ꢀ
DAUE-15-P-FO DAUH-15P
DBUE-25P-FO
DAUH-15P-FO
DBUH-25P DBUH-25P-FO
DCUE-37P-FO DCUH-37P DCUH-37P-FO
DDUE-50P-FO DDUH-50P DDUH-50P-FO
Tin-Plated Shell with Grounding Indents
Mounting Holes
4-4ꢀ Clinch Nuts
Positions
Contacts
Included
Without
Contacts
Contacts
Included
Without
Contacts
9
DEU-9PTI
DEU-9PTI-FO
DEUE-9-PTI
DEUE-9PTI-FO
01
21
37
1ꢀ
DAU-15PTI DAU-15PTI-FO DAUE-15-PTI DAUE-15PTI-FO
DBU-25PTI DBU-25PTI-FO DBUE-25-PTI DBUE-25PTI-FO
DCU-37PTI DCU-37PTI-FO DCUE-37-PTI DCUE-37PTI-FO
DDU-50PTI DDU-50PTI-FO DDUE-50-PTI DDUE-50PTI-FO
D*U Crimp and Poke Sockets
Yellow Chromate
RoHS Compliant
4-4ꢀ Clinch Nuts
Mounting Holes 4-4ꢀ Clinch Nuts
Mounting Holes
Positions
Contacts
Included
Without
Contacts
Contacts
Included
Without
Contacts
Contacts
Included
Without
Contacts
Contacts
Included
Without
Contacts
9
DEU-9S
DAU-15S
DBU-25S
DCU-37S
DDU-50S
DEU-9S-FO
DAU-15S-FO
DBU-25S-FO
DCU-37S-FO
DDU-50S-FO
DEUE-9S
DAUE-15S
DBUE-25S
DCUE-37S
DDUE-50S
DEUE-9S-FO
DAUE-15S-FO
DBUE-25S-FO
DEUH-9S
DEUH-9S-FO
DEUEH-9S
DAUEH-15S
DBUEH-25S
DCUEH-37S
DDUEH-50S
DEUEH-9S-FO
DAUEH-15S-FO
DBUEH-25S-FO
DCUEH-37S-FO
DDUEH-50S-FO
01
21
37
1ꢀ
DAUH-15S
DAUH-15S-FO
DBUH-25S DBUH-25S-FO
DCUE-37S-FO DCUH-37S DCUH-37S-FO
DDUE-50S-FO DDUH-50S DDUH-50S-FO
Tin-Plated Shell
Mounting Holes
4-4ꢀ Clinch Nuts
Positions
Contacts
Included
Without
Contacts
Contacts
Included
Without
Contacts
9
DEU-9ST
DAU-15ST
DBU-25ST
DCU-37ST
DDU-50ST
DEU-9ST-FO
DAU-15ST-FO
DBU-25ST-FO
DCU-37ST-FO
DDU-50ST-FO
DEUE-9ST
DAUE-15ST
DBUE-25ST
DCUE-37ST
DDUE-50ST
DEUE-9ST-FO
DAUE-15ST-FO
DBUE-25ST-FO
DCUE-37ST-FO
DDUE-50ST-FO
01
21
37
1ꢀ
belfuse.com/cinch
11
D-SUBMINIATURE METAL SHELL CRIMP AND POKE
CONTACTS D*U SERIES
INDUSTRIAꢀ
Machined Contacts • 20-24 AWG Wire
Plug
Socket
Dimensions
Wire
A
B
C Max.
Description
Pin
AWG
in
mm
1.67
1.67
in
mm
1.14
1.14
in
mm
#20, 22, 24
#20, 22, 24
.066
.066
.045
.045
.537
.523
13.64
13.28
Socket
Ordering Information
D*U Series Loose-Piece Machined Contacts
Gold Flash
030-1952-000
030-1953-000
3ꢀµin. Gold
030-1952-030
030-1953-030
Pin
Socket
12
D-SUBMINIATURE ALL PLASTIC IDC T* SERIES
INDUSTRIAꢀ
Features
ꢀ Offered in 9, 15, 25, and 37 position plugs and sockets.
ꢀ IDC (insulation displacement) terminations for discrete wire.
ꢀ Offered with .120 mounting holes.
ꢀ Approvals:
• UL Recognized - Files E170218 (UL1977) and E130965 (UL1863).
• CSA Approved - File LR31996.
ꢀ See pages 5-6 for standard dimensions, contact arrangements, and panel mounting specifications.
Materials
Insulator Material
Contact Material
Contact Plating
Glass-filled polyester (black), UL 94 V-O rated
Phosphor bronze (stamped)
Gold flash or 30μin. gold in mating area and gold flash on the
remainder. All over nickel.
Environmental
Operating Temperature
Shock
-65°C to +125°C
50G peak per MIL-STD-202, Method 213, Condition G
Vibration
12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-
STD-202, Method 204, Condition D
Moisture Resistance
90-95% relative humidity @ 40ºC for 96 hours per MIL-STD-202,
Method 103
Electrical
Withstanding Voltage
Minimum 1000V RMS @ sea level
3 Amps
Current Rating
Contact Resistance
Insulation Resistance
2.7 milliohms maximum
5000 megohms minimum (initial); 1000 megohms (minimum) after
environmental testing
Mechanical
Individual Contact Insertion 0.7 oz. minimum/12oz. maximum
and Separation Force
Durability
500 mating cycles
belfuse.com/cinch
13
D-SUBMINIATURE METAL SHELL IDC FOR DISCRETE
CABLE WIRE T* SERIES
INDUSTRIAꢀ
ꢀ Optional strain relief covers for connectors when backshell is not required.
Ordering Information
Positions
Catalog No.
SSD-WC9
9
01
21
37
SSD-WC15
SSD-WC25
SSD-WC37
ꢀ One-piece cover for 9 contact size. Order one per connector. Two-piece cover for other sizes. Order two per
connector.
ꢀ Cover fits both plug and socket.
14
D-SUBMINIATURE ALL-PLASTIC IDC FOR DISCRETE
CABLE WIRE T* SERIES
INDUSTRIAꢀ
ꢀ For use only with SDH Series Gray Backshell on page 41.
ꢀ Offered in 9, 15, 25, and 37 position plugs and sockets.
ꢀ Connector will accommodate 24-28 AWG wire.
ꢀ Offered with plain flanges with 0.120 mounting holes.
ꢀ Uni-Clinch D Single-Wire Hand Insertion Tool #SD-UC: See page 50.
ꢀ Super D Manual Stay Band Tool #SD-MSBT: See page 50.
Dimensions
A
A
B
CP
CS
D
Positions
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
9
1.209
1.536
2.079
2.724
30.71
39.01
52.81
69.19
1.309
1.636
2.179
2.824
33.25
41.55
55.35
71.73
.984
24.99
33.32
47.04
63.50
.668
.995
1.535
2.183
16.96
25.28
38.99
55.45
.642
.970
1.512
2.158
16.31
24.64
38.40
54.81
.592
.918
1.462
2.114
15.04
23.31
37.13
53.70
01
21
37
1.312
1.852
2.500
Ordering Information
IDC All-Plastic Sockets
Plain Flange
IDC All-Plastic Plugs
Plain Flange
Mounting Holes
Mounting Holes
RoHS Compliant
Gold Flash
TEH9P
RoHS Compliant
Gold Flash
TEH9S
Positions
Gold Flash
TE-9P
Positions
Gold Flash
TE-9S
9
9
01
21
TA-15P
TAH15P
01
21
TA-15S
TAH15S
TB-25P
TB-25S
belfuse.com/cinch
15
D-SUBMINIATURE METAL SHELL SOLDER CUP,
VERTICAL PCB MOUNT, AND WIRE WRAP
BASIC D SERIES
INDUSTRIAꢀ
Features
ꢀ Offered in Wire Wrap and Solder Cup styles for wire termination and vertical style for PCB mount.
ꢀ Offered with 0.120 mounting holes or 4-40 clinch nuts.
ꢀ Offered in 9, 15, 25, 37, and 50 position plugs and sockets.
ꢀ Gold flash contacts.
ꢀ Approvals:
• UL Recognized - Files E170218 (UL1977) and E130965 (UL1863).
• CSA Approved - File LR31996.
ꢀ See pages 5-6 for standard dimensions, contact arrangements, and panel mounting specifications.
Materials
Insulator Material
Connector Shell
Glass-filled polyester (white), UL 94 V-O rated
Steel with zinc plating and yellow chromate finish, RoHS clear
chromate or tin plating (grounding indents on plug)
4-4ꢀ Clinch Nut
Steel with cadmium plating and yellow chromate finish
Stainless Steel, passivated
Dual Float Bushing
Environmental
Operating Temperature
Shock
-65°C to +125°C
50G peak per MIL-STD-202, Method 213, Condition G
Vibration
12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-
STD-202, Method 204, Condition D
Moisture Resistance
90-95% relative humidity @ 40ºC for 96 hours per MIL-STD-202,
Method 103
Electrical
Withstanding Voltage
Minimum 1250V RMS @ sea level
5 Amps
Current Rating
Contact Resistance
Insulation Resistance
2.7 milliohms maximum
5000 megohms maximum (initial); 1000 megohms (minimum) after
environmental testing
Mechanical
Individual Contact Insertion 0.7 oz. minimum/12oz. maximum
and Separation Force
Durability
500 mating cycles
16
D-SUBMINIATURE METAL SHELL SOLDER CUP
BASIC D SERIES
INDUSTRIAꢀ
ꢀ Stamped contacts.
.312 (7.92)
ꢀ Will accommodate up to 20 AWG wire.
Materials
Contact Material
Contact Plating
Copper Alloy
Stamped contacts with gold flash in mating area, gold flash on
remainder. All over nickel.
.200 (5.08) REF.
Ordering Information
Solder Cup Plugs
Zinc-Plated Shell with Chromate Finish
Stamped Contact with Gold Flash in Solder Cup
Yellow Chromate
RoHS Compliant with Clear Chromate
Mounting
Holes
Mounting Holes
4-4ꢀ Clinch
Nuts
Positions Gold Flash
Gold Flash
Gold Flash
DEH-9P
Gold Flash
DEEH-9P
9
DE-9P
DA-15P
DB-25P
DC-37P
DD-50P
DEE-9P
DAE-15P
DBE-25P
DCE-37P
DDE-50P
01
21
37
1ꢀ
DAH-15P
DBH-25P
DCH-37P
DDH-50P
DAEH-15P
DBEH-25P
DCEH-37P
DDEH-50P
Tin-Plated Shell with Ground Indents
Stamped Contact with Gold Flash in Solder Cup
Mounting
Holes
4-4ꢀ Clinch
Nuts
Dual Float
Bushings
Positions Gold Flash
Gold Flash
Gold Flash
9
DE-9PTI
DA-15PTI
DB-25PTI
DC-37PTI
DD-50PTI
DEE-9PTI
DAE-15PTI
DBE-25PTI
DCE-37PTI
DDE-50PTI
DEY-9PTI
DAY-15PTI
DBY-25PTI
DCY-37PTI
DDY-50PTI
01
21
37
1ꢀ
belfuse.com/cinch
17
D-SUBMINIATURE METAL SHELL SOLDER CUP
BASIC D SERIES
INDUSTRIAꢀ
Ordering Information
Solder Cup Sockets
Zinc-Plated Shell with Chromate Finish
Stamped Contact with Gold Flash in Solder Cup
Yellow Chromate
RoHS Compliant with Clear Chromate
Mounting 4-4ꢀ Clinch
Mounting
Holes
4-4ꢀ Clinch
Nuts
Holes
Nuts
Positions Gold Flash
Gold Flash
DEE-9S
Gold Flash
DEH-9S
Gold Flash
DEEH-9S
9
DE-9S
DA-15S
DB-25S
DC-37S
DD-50S
01
21
37
1ꢀ
DAE-15S
DBE-25S
DCE-37S
DDE-50S
DAH-15S
DBH-25S
DCH-37S
DDH-50S
DAEH-15S
DBEH-25S
DCEH-37S
DDEH-50S
Tin-Plated Shell
Stamped Contact with Gold Flash in Solder Cup
Mounting
Holes
4-4ꢀ Clinch
Nuts
Positions Gold Flash
Gold Flash
9
DE-9ST
DA-15ST
DB-25ST
DC-37ST
DD-50ST
DEE-9ST
DAE-15ST
DBE-25ST
DCE-37ST
DDE-50ST
01
21
37
1ꢀ
18
D-SUBMINIATURE METAL SHELL VERTICAL DIP
SOLDER PCB BASIC D SERIES
INDUSTRIAꢀ
ꢀ .040" contact diameter.
ꢀ Short rear insulator provides low profile on PCB.
ꢀ Offered with .120 mounting holes, dual float bushings, or optional 4-40 clinch nuts.
.130 (3.30)
.104 (2.64)
Materials
.042 (1.07)
.038 (0.97)
Contact Material
Contact Plating
Socket - Phosphor bronze (machined). Plug - Brass (machined).
Gold flash or 30μin. gold. All over nickel.
.200 (5.08) REF.
Ordering Information
Vertical PCB Plugs
Vertical PCB Sockets
Zinc-Plated Shell with Yellow Chromate Finish
Zinc-Plated Shell with Yellow Chromate Finish
Mounting
Holes
4-4ꢀ Clinch
Nuts
Mounting
Holes
4-4ꢀ Clinch
Nuts
Positions
Gold Flash
DE-9PV
Gold Flash
DEE-9PV
Positions
Gold Flash
DE-9SV
Gold Flash
DEE-9SV
9
9
01
21
37
1ꢀ
DA-15PV
DB-25PV
DC-37PV
DD-50PV
DAE-15PV
DBE-25PV
DCE-37PV
DDE-50PV
01
21
37
1ꢀ
DA-15SV
DB-25SV
DC-37SV
DD-50SV
DAE-15SV
DBE-25SV
DCE-37SV
DDE-50SV
Tin-Plated Shell with Grounding Indents
Tin-Plated Shell
Mounting
Holes
4-4ꢀ Clinch
Nuts
Mounting
Holes
4-4ꢀ Clinch
Nuts
Positions
Gold Flash
DE-9PVTI
Gold Flash
DEE-9PVTI
DAE-15PVTI
DBE-25PVTI
DCE-37PVTI
DDE-50PVTI
Positions
Gold Flash
DE-9SVT
Gold Flash
DEE-9SVT
9
9
01
21
37
1ꢀ
DA-15PVTI
DB-25PVTI
DC-37PVTI
DD-50PVTI
01
21
37
1ꢀ
DA-15SVT
DB-25SVT
DC-37SVT
DD-50SVT
DAE-15SVT
DBE-25SVT
DCE-37SVT
DDE-50SVT
belfuse.com/cinch
19
D-SUBMINIATURE METAL SHELL WIRE WRAP
BASIC D SERIES
INDUSTRIAꢀ
ꢀ Reliable wire wrap termination.
ꢀ Two contact lengths: .375" or .585".
ꢀ .025" square contact tails.
.375 (9.53)
.585 (14.86)
or
Materials
Contact Material
Contact Plating
Copper alloy (machined).
Gold flash. All over nickel.
.200 (5.08) REF.
Ordering Information
Wire Wrap Plugs
.375" Tail Length
Zinc-Plated Shell with Chromate Finish
Yellow Chromate
RoHS Compliant with Clear Chromate
Mounting
Holes
4-4ꢀ Clinch
Nuts
Mounting
Holes
4-4ꢀ Clinch
Nuts
Positions
Gold Flash
DE-9P-F179
DA-15P-F179
DB-25P-F179
DC-37P-F179
DD-50P-F179
Gold Flash
DEE-9P-F179
DAE-15P-F179
DBE-25P-F179
DCE-37P-F179
DDE-50P-F179
Gold Flash
Gold Flash
9
DEH-9P-F179
DAH-15P-F179
DBH-25P-F179
DCH-37P-F179
DDH-50P-F179
DEEH-9P-F179
DAEH-15P-F179
DBEH-25P-F179
DCEH-37P-F179
DDEH-50P-F179
01
21
37
1ꢀ
Tin-Plated Shell with Grounding Indents
Mounting Holes
4-4ꢀ Clinch
Nuts
Positions
Gold Flash
Gold Flash
9
DE-9PTI-F179
DA-15PTI-F179
DB-25PTI-F179
DC-37PTI-F179
DD-50PTI-F179
DEE-9PTI-F179
DAE-15PTI-F179
DBE-25PTI-F179
DCE-37PTI-F179
DDE-50PTI-F179
01
21
37
1ꢀ
20
D-SUBMINIATURE METAL SHELL WIRE WRAP
BASIC D SERIES
INDUSTRIAꢀ
Ordering Information
Wire Wrap Plugs (Cont'd)
.585" Tail Length
Zinc-Plated Shell with Chromate Finish
Yellow Chromate
RoHS Compliant with Clear Chromate
Mounting Holes
4-4ꢀ Clinch
Mounting
Holes
4-4ꢀ Clinch
Nuts
Nuts
Positions
Gold Flash
Gold Flash
Gold Flash
Gold Flash
9
DE-9P-F179C
DA-15P-F179C
DB-25P-F179C
DC-37P-F179C
DD-50P-F179C
DEE-9P-F179C
DAE-15P-F179C
DBE-25P-F179C
DCE-37P-F179C
DDE-50P-F179C
DEH-9P-F179C
DAH-15P-F179C
DBH-25P-F179C
DCH-37P-F179C
DDH-50P-F179C
DEEH-9P-F179C
DAEH-15P-F179C
DBEH-25P-F179C
DCEH-37P-F179C
DDEH-50P-F179C
01
21
37
1ꢀ
Tin-Plated Shell with Grounding Indents
Mounting Holes
4-4ꢀ Clinch
Nuts
Positions
Gold Flash
Gold Flash
9
DE-9PTI-F179C
DA-15PTI-F179C
DB-25PTI-F179C
DC-37PTI-F179C
DD-50PTI-F179C
DEE-9PTI-F179C
DAE-15PTI-F179C
DBE-25PTI-F179C
DCE-37PTI-F179C
DDE-50PTI-F179C
01
21
37
1ꢀ
belfuse.com/cinch
21
D-SUBMINIATURE METAL SHELL WIRE WRAP
BASIC D SERIES
INDUSTRIAꢀ
Ordering Information
Wire Wrap Sockets
.375" Tail Length
Zinc-Plated Shell with Yellow Chromate Finish
RoHS Compliant with Clear Chromate
Mounting Holes
Gold Flash
4-4ꢀ Clinch Nuts
Gold Flash
Mounting Holes
Gold Flash
4-4ꢀ Clinch Nuts
Gold Flash
Positions
9
DE-9S-F179
DEE-9S-F179
DAE-15S-F179
DBE-25S-F179
DCE-37S-F179
DDE-50S-F179
DEH-9S-F179
DAH-15S-F179
DBH-25S-F179
DCH-37S-F179
DDH-50S-F179
DEEH-9S-F179
DAEH-15S-F179
DBEH-25S-F179
DCEH-37S-F179
DDEH-50S-F179
01
21
37
1ꢀ
DA-15S-F179
DB-25S-F179
DC-37S-F179
DD-50S-F179
Tin-Plated Shell
Mounting Holes
4-4ꢀ Clinch Nuts
Gold Flash
Positions
Gold Flash
DE-9ST-F179
DA-15ST-F179
DB-25ST-F179
DC-37ST-F179
DD-50ST-F179
9
DEE-9ST-F179
DAE-15ST-F179
DBE-25ST-F179
DCE-37ST-F179
DDE-50ST-F179
01
21
37
1ꢀ
.585" Tail Length
Zinc-Plated Shell with Chromate Finish
Yellow Chromate
RoHS Compliant with Clear Chromate
Mounting Holes
Gold Flash
4-4ꢀ Clinch Nuts
Gold Flash
Mounting Holes
Gold Flash
4-4ꢀ Clinch Nuts
Gold Flash
Positions
9
DE-9S-F179C
DA-15S-F179C
DB-25S-F179C
DC-37S-F179C
DD-50S-F179C
DEE-9S-F179C
DAE-15S-F179C
DBE-25S-F179C
DCE-37S-F179C
DDE-50S-F179C
DEH-9S-F179C
DAH-15S-F179C
DBH-25S-F179C
DCH-37S-F179C
DDH-50S-F179C
DEEH-9S-F179C
DAEH-15S-F179C
DBEH-25S-F179C
DCEH-37S-F179C
DDEH-50S-F179C
01
21
37
1ꢀ
Tin Plated Shell
Mounting Holes
4-4ꢀ Clinch Nuts
Gold Flash
Positions
Gold Flash
9
DE-9ST-F179C
DA-15ST-F179C
DB-25ST-F179C
DC-37ST-F179C
DD-50ST-F179C
DEE-9ST-F179C
DAE-15ST-F179C
DBE-25ST-F179C
DCE-37ST-F179C
DDE-50ST-F179C
01
21
37
1ꢀ
22
D-SUBMINIATURE METAL SHELL SOLDER CUP,
SERIES 1 - HIGH RELIABILITY
INDUSTRIAꢀ
Features
ꢀ Solder cup version for wire termination.
ꢀ Commercial version of M24308 military connectors with tin-plated or zinc-plated shell and 30μin. gold plating.
ꢀ Monoblock green diallyl phthalate insulator for improved electrical performance.
ꢀ Machined contacts for precision performance.
ꢀ Offered in 9, 15, 25, 37, and 50 position plugs and sockets.
ꢀ Offered with 0.120 mounting holes or 4-40 clinch nuts.
ꢀ Approvals:
• UL Recognized - Files E170218 (UL1977)and E130965 (UL1863).
• CSA Approved - File LR31996.
ꢀ See pages 5-6 for standard dimensions, contact arrangements, and panel mounting specifications.
Materials
Insulator Material
Connector Shell
Glass-filled diallyl phthalate (green), UL 94 V-O rated
Steel with zinc plating and yellow chromate finish, RoHS clear
chromate or tin plating (grounding indents on plug)
Contact Material
Contact Plating
4-4ꢀ Clinch Nut
Dual Float Bushing
Plug - Brass (machined), Socket - Phosphor bronze (machined)
30μin gold over nickel
Steel with cadmium plating and yellow chromate finish
Stainless Steel, passivated
Environmental
Operating Temperature
Shock
-65°C to +125°C
50G peak per MIL-STD-202, Method 213, Condition G
Vibration
12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-
STD-202, Method 204, Condition D
Moisture Resistance
90-95% relative humidity @ 40ºC for 96 hours per MIL-STD-202,
Method 103
Electrical
Withstanding Voltage
Minimum 1250V RMS @ sea level
5 Amps
Current Rating
Contact Resistance
Insulation Resistance
2.7 milliohms maximum
5000 megohms maximum (initial); 1000 megohms (minimum) after
environmental testing
Mechanical
Individual Contact Insertion 0.7 oz. minimum/12oz. maximum
and Separation Force
Durability
500 mating cycles
belfuse.com/cinch
23
D-SUBMINIATURE METAL SHELL SOLDER CUP
SERIES 1 - HIGH RELIABILITY
INDUSTRIAꢀ
ꢀ Will accommodate up to 20 AWG wire.
.390 (9.91)
.200 (5.08) REF.
Ordering Information
Solder Cup Plugs
Zinc-Plated Shell with Chromate Finish
Yellow Chromate
RoHS Compliant with Clear Chromate
Mounting Holes
4-4ꢀ Clinch
Mounting
Holes
4-4ꢀ Clinch
Nuts
Nuts
Positions
Gold Flash
DEM-9P
Gold Flash
DEME-9P
Gold Flash
DEMH-9P
Gold Flash
DEMEH-9P
DAMEH-15P
DBMEH-25P
DCMEH-37P
DDMEH-50P
9
01
21
37
1ꢀ
DAM-15P
DBM-25P
DCM-37P
DDM-50P
DAME-15P
DBME-25P
DCME-37P
DDME-50P
DAMH-15P
DBMH-25P
DCMH-37P
DDMH-50P
Solder Cup Sockets
Zinc-Plated Shell with Chromate Finish
Yellow Chromate
RoHS Compliant with Clear Chromate
Mounting Holes
4-4ꢀ Clinch
Nuts
Mounting
Holes
4-4ꢀ Clinch
Nuts
Positions
Gold Flash
DEM-9S
Gold Flash
DEME-9S
Gold Flash
DEMH-9S
Gold Flash
DEMEH-9S
DAMEH-15S
DBMEH-25S
DCMEH-37S
DDMEH-50S
9
01
21
37
1ꢀ
DAM-15S
DBM-25S
DCM-37S
DDM-50S
DAME-15S
DBME-25S
DCME-37S
DDME-50S
DAMH-15S
DBMH-25S
DCMH-37S
DDMH-50S
24
D-SUBMINIATURE METAL SHELL CRIMP AND POKE
SERIES 3 - HIGH RELIABILITY
INDUSTRIAꢀ
Features
ꢀ High-reliability in a commercial grade connector.
ꢀ Monoblock diallyl phthalate insulator for improved electrical performance.
ꢀ Offered in 9, 15, 25, 37, and 50 position plugs and sockets.
ꢀ Offered with .120 mounting holes and 4-40 clinch nuts.
ꢀ Commercial version of M24308 Military connectors with tin-plated or zinc-plated shell and 30μin. gold contact
plating.
ꢀ Screw Machine Crimp and Poke contacts available as follows:
• Note that all contacts are packed loose.
• Plating options: 30μin. gold.
• Can be included with the connector or purchased separately (FO part numbers).
ꢀ See pages 5-6 for standard dimensions, contact arrangements, and panel mounting specifications.
Materials
Insulator Material
Connector Shell
Glass fiber-filled diallyl phthalate (green), UL 94 V-O
Steel with zinc plating and yellow chromate finish, RoHS, clear
chromate or tin plated
Contact Material
Contact Plating
4-4ꢀ Clinch Nut
Dual Float Bushing
Plug - Brass (machined), Socket - Phosphor bronze (machined)
30μin gold over nickel
Steel with cadmium plating and yellow chromate finish
Stainless Steel, passivated
Environmental
Operating Temperature
Shock
-65°C to +125°C
50G peak per MIL-STD-202, Method 213, Condition G
Vibration
12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-
STD-202, Method 204, Condition D
Moisture Resistance
90-95% relative humidity @ 40ºC for 96 hours per MIL-STD-202,
Method 103
Electrical
Withstanding Voltage
Minimum 1250V RMS @ sea level
5 Amps
Current Rating
Contact Resistance
Insulation Resistance
2.7 milliohms maximum
5000 megohms maximum (initial); 1000 megohms (minimum) after
environmental testing
Mechanical
Individual Contact Insertion 0.7 oz. minimum/12oz. maximum
and Separation Force
Durability
500 mating cycles
belfuse.com/cinch
25
D-SUBMINIATURE METAL SHELL CRIMP AND POKE
SERIES 3 - HIGH RELIABILITY
INDUSTRIAꢀ
.375 (9.53) max.
Termination Tooling
ꢀ Contact Insertion/Extraction Tool: #CIET-20-HD (Military #M81969/39-01). See page 51.
ꢀ Crimp Contact Hand Tool: Military #M22520/2-01. See page 51. Contact Positioner (below) required.
ꢀ Positioner for machine contacts for Hand Tool #M22520/2-01 (locates contact in the correct position):
#M22520/2-08. See page 51.
Ordering Information
Crimp and Poke - Plugs
Zinc-Plated Shell with Chromate Finish
Yellow Chromate
RoHS Compliant with Clear Chromate
Mounting Holes
4-4ꢀ Clinch Nuts
Mounting
Holes
4-4ꢀ Clinch
Nuts
Positions
1ꢀµin. Gold
Contacts
Without
Contacts
1ꢀµin. Gold
Contacts
Without
Contacts
1ꢀµin. Gold
Contacts
Without
Contacts
9
DEMA-9P
DAMA-15P
DBMA-25P
DCMA-37P
DDMA-50P
DEMA-9P-FO
DAMA-15P-FO
DBMA-25P-FO
DCMA-37P-FO
DDMA-50P-FO
DEMAE-9P
DAMAE-15P
DBMAE-25P
DCMAE-37P
DDMAE-50P
DEMAE-9P-FO
DAMAE-15P-FO
DBMAE-25P-FO
DCMAE-37P-FO
DDMAE-50P-FO
DEMAH-9P
DAMAH-15P
DBMAH-25P
DCMAH-37P
DDMAH-50P
DEMAEH-9P-FO
DAMAEH-15P-FO
DBMAEH-25P-FO
DCMAEH-37P-FO
DDMAEH-50P-FO
01
21
37
1ꢀ
Tin-Plated Shells with Grounding Indents
Mounting Holes
4-4ꢀ Clinch Nuts
Positions
1ꢀµin. Gold
Contacts
Without
Contacts
1ꢀµin. Gold
Contacts
Without
Contacts
9
DEMA-9PTI
DAMA-15PTI
DBMA-25PTI
DCMA-37PTI
DDMA-50PTI
DEMA-9PTI-FO
DAMA-15PTI-FO
DBMA-25PTI-FO
DCMA-37PTI-FO
DDMA-50PTI-FO
DEMAE-9PTI
DAMAE-15PTI
DBMAE-25PTI
DCMAE-37PTI
DDMAE-50PTI
DEMAE-9PTI-FO
DAMAE-15PTI-FO
DBMAE-25PTI-FO
DCMAE-37PTI-FO
DDMAE-50PTI-FO
01
21
37
1ꢀ
26
D-SUBMINIATURE METAL SHELL CRIMP AND POKE
SERIES 3 - HIGH RELIABILITY
INDUSTRIAꢀ
Ordering Information
Crimp and Poke - Sockets
Zinc-Plated Shell with Chromate Finish
Yellow Chromate
RoHS Compliant with Clear Chromate
Mounting Holes
4-4ꢀ Clinch Nuts
Mounting
Holes
4-4ꢀ Clinch Nuts
Positions
1ꢀµin. Gold
Contacts
Without
Contacts
1ꢀµin. Gold
Contacts
Without
Contacts
1ꢀµin. Gold
Contacts
Without
Contacts
9
DEMA-9S
DAMA-15S
DBMA-25S
DCMA-37S
DDMA-50S
DEMA-9S-FO
DAMA-15S-FO
DBMA-25S-FO
DCMA-37S-FO
DDMA-50S-FO
DEMAE-9S
DAMAE-15S
DBMAE-25S
DCMAE-37S
DDMAE-50S
DEMAE-9S-FO
DAMAE-15S-FO
DBMAE-25S-FO
DCMAE-37S-FO
DDMAE-50S-FO
DEMAH-9S
DAMAH-15S
DBMAH-25S
DCMAH-37S
DDMAH-50S
DEMAEH-9S-FO
DAMAEH-15S-FO
DBMAEH-25S-FO
DCMAEH-37S-FO
DDMAEH-50S-FO
01
21
37
1ꢀ
Tin-Plated Shell
Mounting Holes
4-4ꢀ Clinch Nuts
Positions
1ꢀµin. Gold
Contacts
Without
Contacts
1ꢀµin. Gold
Contacts
Without
Contacts
9
DEMA-9ST
DAMA-15ST
DBMA-25ST
DCMA-37ST
DDMA-50ST
DEMA-9ST-FO
DAMA-15ST-FO
DBMA-25ST-FO
DCMA-37ST-FO
DDMA-50ST-FO
DEMAE-9ST
DAMAE-15ST
DBMAE-25ST
DCMAE-37ST
DDMAE-50ST
DEMAE-9ST-FO
DAMAE-15ST-FO
DBMAE-25ST-FO
DCMAE-37ST-FO
DDMAE-50ST-FO
01
21
37
1ꢀ
Crimp and Poke Machined Contacts
ꢀ Will accommodate 20, 22, and 24 AWG wire.
Ordering Information
Contacts
Description
Pin
M39029/64-369
M39029/63-368
Socket
belfuse.com/cinch
27
D-SUBMINIATURE METAL SHELL MIL-C-24308
M24308 SERIES
INDUSTRIAꢀ
Features
ꢀ Meets all MIL-C-24308 Class G specifications.
ꢀ Offered in Crimp and Poke and Solder Cup and PCB vertical and right-angle.
ꢀ Offered in 9, 15, 25, 37, and 50 position plugs and sockets except right-angle (9 to 37 positions).
ꢀ Monoblock green diallyl phthalate insulator for improved electrical performance.
ꢀ See pages 4-6 for standard dimensions, contact arrangements, and panel mounting specifications.
Materials
Insulator Material
Connector Shell
Contact Material
Contact Plating
4-4ꢀ Clinch Nut
Dual Float Bushing
Glass-filled diallyl phthalate (green), per MIL-M-14, Type SDG-F
Steel with cadmium plating and yellow chromate finish
Plug - Brass (machined), Socket - Phosphor bronze (machined)
50μin gold over copper or nickel
Steel with cadmium plating and yellow chromate finish
Stainless Steel, passivated or non-magnetic brass
Environmental
Operating Temperature
Shock
-65°C to +125°C
50G peak per MIL-STD-202, Method 213, Condition G
Vibration
12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-
STD-202, Method 204, Condition D
Moisture Resistance
90-95% relative humidity @ 40ºC for 96 hours per MIL-STD-202,
Method 103
Electrical
Withstanding Voltage
Minimum 1250V RMS @ sea level
5 Amps
Current Rating
Contact Resistance
Insulation Resistance
2.7 milliohms maximum
5000 megohms maximum (initial); 1000 megohms (minimum) after
environmental testing
Mechanical
Individual Contact Insertion 0.7 oz. minimum/12oz. maximum
and Separation Force
Durability
500 mating cycles
28
D-SUBMINIATURE METAL SHELL MIL-C-24308
CRIMP AND POKE M24308 SERIES
ꢀ Available with .120 mounting holes, float bushings, or dual float bushings.
ꢀ Order with contacts included or separately.
INDUSTRIAꢀ
ꢀ Order with contact Insertion/Extraction Tool included or order tool #CIET-20-HD separately. See page 51.
Ordering Information
Crimp and Poke Plugs
Steel Shell
Contacts Included.Insertion/Extraction Tool Not Included.
Positions
Mounting Holes
M24308/4-1F
M24308/4-2F
M24308/4-3F
M24308/4-4F
M24308/4-5F
Float Bushings
M24308/4-302F
M24308/4-303F
M24308/4-304F
M24308/4-305F
M24308/4-306F
Dual Float Bushings
M24308/4-435F
M24308/4-436F
M24308/4-437F
M24308/4-438F
M24308/4-439F
9
01
21
37
1ꢀ
Contacts Included.Insertion/Extraction Tool Included.
Positions
Mounting Holes
M24308/4-6F
M24308/4-7F
M24308/4-8F
M24308/4-9F
M24308/4-10F
Float Bushings
M24308/4-313F
M24308/4-314F
M24308/4-315F
M24308/4-316F
M24308/4-317F
Dual Float Bushings
M24308/4-446F
M24308/4-447F
M24308/4-448F
M24308/4-449F
M24308/4-450F
9
01
21
37
1ꢀ
Contacts Included.Insertion/Extraction Tool Not Included.
Positions
Mounting Holes
M24308/4-259F
M24308/4-260F
M24308/4-261F
M24308/4-262F
M24308/4-263F
Float Bushings
M24308/4-324F
M24308/4-325F
M24308/4-326F
M24308/4-327F
M24308/4-328F
Dual Float Bushings
M24308/4-457F
M24308/4-458F
M24308/4-459F
M24308/4-460F
M24308/4-461F
9
01
21
37
1ꢀ
belfuse.com/cinch
29
D-SUBMINIATURE METAL SHELL MIL-C-24308
CRIMP AND POKE M24308
INDUSTRIAꢀ
Ordering Information
Crimp and Poke Sockets
Steel Shell
Contacts Included.Insertion/Extraction Tool Not Included.
Positions
Mounting Holes
M24308/2-1F
M24308/2-2F
M24308/2-3F
M24308/2-4F
M24308/2-5F
Float Bushings
M24308/2-23F
M24308/2-24F
M24308/2-25F
M24308/2-26F
M24308/2-27F
Dual Float Bushings
M24308/2-342F
M24308/2-343F
M24308/2-344F
M24308/2-345F
M24308/2-346F
9
01
21
37
1ꢀ
Contacts Included.Insertion/Extraction Tool Included.
Positions
Mounting Holes
M24308/2-6F
M24308/2-7F
M24308/2-8F
M24308/2-9F
M24308/2-10F
Float Bushings
M24308/2-34F
M24308/2-35F
M24308/2-36F
M24308/2-37F
M24308/2-38F
Dual Float Bushings
M24308/2-353F
M24308/2-354F
M24308/2-355F
M24308/2-356F
M24308/2-357F
9
01
21
37
1ꢀ
Contacts Included.Insertion/Extraction Tool Not Included.
Positions
Mounting Holes
M24308/2-281F
M24308/2-282F
M24308/2-283F
M24308/2-284F
M24308/2-285F
Float Bushings
M24308/2-292F
M24308/2-293F
M24308/2-294F
M24308/2-295F
M24308/2-296F
Dual Float Bushings
M24308/2-482F
M24308/2-483F
M24308/2-484F
M24308/2-485F
M24308/2-486F
9
01
21
37
1ꢀ
30
D-SUBMINIATURE METAL SHELL MIL-C-24308
CRIMP AND POKE M24308 SERIES
INDUSTRIAꢀ
Ordering Information
Tooling
ꢀ Contact Insertion/Extraction Tool: #CIET-20-HD (Military #M81969/39-01). See page 51.
ꢀ Wire termination hand tool: #M22520/2-01. See page 51.
ꢀ Positioner for machine contacts for hand tool #M22520/2-08 (locates contact in the correct position).
See page 51.
Crimp and Poke Contacts
Ordering Information
ꢀ Will accommodate 20, 22, and 24 AWG wire.
Description
Pin
M39029/64-369
M39029/63-368
Socket
belfuse.com/cinch
31
D-SUBMINIATURE METAL SHELL MIL-C-24308
SOLDER CUP M24308 SERIES
INDUSTRIAꢀ
ꢀ Available with .120" mounting holes, float bushings, or dual float bushings.
ꢀ Will accommodate up to 20 AWG wire.
Ordering Information
Solder Cup Plugs
Steel Shell
Positions
Mounting Holes
M24308/3-1F
M24308/3-2F
M24308/3-3F
M24308/3-4F
M24308/3-5F
Float Bushings
M24308/2-12F
M24308/2-13F
M24308/2-14F
M24308/2-15F
M24308/2-16F
Dual Float Bushings
M24308/2-17F
M24308/2-18F
M24308/2-19F
M24308/2-20F
M24308/2-21F
9
01
21
37
1ꢀ
Brass Non-Magnetic Shell
Positions
Mounting Holes
M24308/7-1F
M24308/7-2F
M24308/7-3F
M24308/7-4F
M24308/7-5F
Float Bushings
M24308/7-12F
M24308/7-13F
M24308/7-14F
M24308/7-15F
M24308/7-16F
Dual Float Bushings
M24308/7-17F
M24308/7-18F
M24308/7-19F
M24308/7-20F
M24308/7-21F
9
01
21
37
1ꢀ
Solder Cup Sockets
Steel Shell
Positions
Mounting Holes
Float Bushings
M24308/1-12F
M24308/1-13F
M24308/1-14F
M24308/1-15F
M24308/1-16F
Dual Float Bushings
M24308/1-23F
M24308/1-24F
M24308/1-25F
M24308/1-26F
M24308/1-27F
9
M24308/1-1F
M24308/1-2F
M24308/1-3F
M24308/1-4F
M24308/1-5F
01
21
37
1ꢀ
Brass Non-Magnetic Shell
Positions
Mounting Holes
M24308/5-1F
M24308/5-2F
M24308/5-3F
M24308/5-4F
M24308/5-5F
Float Bushings
M24308/5-12F
M24308/5-13F
M24308/5-14F
M24308/5-15F
M24308/5-16F
Dual Float Bushings
M24308/5-23F
M24308/5-24F
M24308/5-25F
M24308/5-26F
M24308/5-27F
9
01
21
37
1ꢀ
32
D-SUBMINIATURE METAL SHELL MIL-C-24308
PCB M24308 SERIES
INDUSTRIAꢀ
Right-Angle
Ordering Information
0.396
0.340
0.283
ꢀ .283" footprint requires minimal PCB space.
ꢀ Available with three contact tail lengths (.127" and .183") with .030" contact
diameter.
See Chart
ꢀ Offered with .120" mounting holes.
ꢀ Mounting bracket: Black nylon. Can be removed if necessary.
0.122 (2.84)
Ordering Information
Right-Angle PCB Plugs (Sockets not available)
Steel Shell
Positions
.027 Tail Length
.083 Tail Length
.ꢀ3ꢀ Contact Diameter
.ꢀ3ꢀ Contact Diameter
9
M24308/24-25F
M24308/24-26F
M24308/24-27F
M24308/24-28F
M24308/24-49F
M24308/24-50F
M24308/24-51F
M24308/24-52F
01
21
37
Vertical
Vertical Connector
ꢀ Available with two contact tail lengths (.158" and .183") with contact diam
.030".
ꢀ Offered with .120" mounting holes.
Ordering Information
Vertical PCB Plugs
Steel Shell
Vertical PCB Sockets
Steel Shell
Positions
.018 Tail Length
.083 Tail Length
Positions
.018 Tail Length
.083 Tail Length
.ꢀ3ꢀ Contact Diameter
.ꢀ3ꢀ Contact Diameter
.ꢀ3ꢀ Contact Diameter
.ꢀ3ꢀ Contact Diameter
9
M24308/24-1F
M24308/24-2F
M24308/24-3F
M24308/24-4F
M24308/24-5F
M24308/24-7F
M24308/24-8F
M24308/24-9F
M24308/24-10F
M24308/24-11F
9
M24308/23-1F
M24308/23-2F
M24308/23-3F
M24308/23-4F
M24308/23-5F
M24308/23-7F
M24308/23-8F
M24308/23-9F
M24308/23-10F
M24308/23-11F
01
21
37
1ꢀ
01
21
37
1ꢀ
belfuse.com/cinch
33
D-SUBMINIATURE BACKSHELLS/JUNCTION
SHELLS/HOODS ACCESSORIES
INDUSTRIAꢀ
Features
Cinch backshells are offered in a variety of styles, each having a specific strength.
ꢀ Backshells have two-piece construction and are frequently used where appearance is a major factor. RFI/EMI
shielding capability is also an option:
• Plastic Backshells: No shielding.
• Metallized Plastic: Economical method of shielding.
• Diecast Backshells: Maximum shielding.
ꢀ Cinch SDH Series backshells utilize Cinch’s Latch-N-Lock™ system with quick release disconnect. Just squeeze
the latch levers to release the connector. Also available with standard 4-40 mounting hardware.
ꢀ Junction Shells come in a variety of sizes and shapes including right-angle and low profile. They are generally of
one-piece construction with an adjustable clamp, but there is no shielding.
ꢀ Hoods have an improved appearance versus junction shells but no shielding. They are all-plastic and come in
right-angle or straight configurations.
ꢀ Hardware, in the form of adjustable grommets or strain relief clamps and 4-40 screws, is generally supplied with
the product; however, a variety of optional hardware is also available in the accessories section of this catalog.
34
D-SUBMINIATURE BACKSHELLS - TWO-PIECE
D*H SERIES
INDUSTRIAꢀ
ꢀ Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180° straight
cable entry.
ꢀ Fits standard metal shell D-subminiature plugs and sockets as well as HTD Series 1.5 D-subs.
ꢀ Ethernet hoods are available in diecast 15 position versions only with both 90° and 180° cable entry.
ꢀ Included in all backshells:
• Hardware: 4-40 screws, hex nuts, 4-40 screw mounting bracket.
• Grommets: To accommodate most cable sizes. Grommets also function as strain reliefs.
ꢀ Backshells are individually bagged.
ꢀ Note that slide locks may not be used with these backshells.
ꢀ Optional thumbscrew for backshell must be ordered separately if required.
Materials
4-4ꢀ screws, hex nuts,
mounting bracket
Steel with zinc plating and clear chromate coating
Standard Backshells
Plastic Backshells: ABS (black), hardware - steel with zinc plating, grommets - polyphenylene, (black).
Metallized Plastic Backshells: ABS with nickel over copper plating, hardware - steel with zinc plating, grommets
- PVC (black).
Diecast Backshells: Diecast zinc, grommets - PVC (black).
Ethernet Backshells
Diecast zinc, grommets - PVC (black)
Plastic
Metallized
Diecast
belfuse.com/cinch
35
D-SUBMINIATURE BACKSHELLS - TWO-PIECE
D*H SERIES
INDUSTRIAꢀ
Straight (180º) Standard Backshells
Plastic and Metallized Plastic Backshells
Dimensions
A
B
C
D
E
F
Shell Size
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
E
A
B
C
D
1.225
1.540
2.090
2.730
2.645
31.12
39.12
53.09
69.34
67.18
1.547
1.516
1.655
1.830
1.855
39.29
38.51
42.04
46.48
41.12
0.640
0.640
0.710
0.906
0.940
16.26
16.26
18.03
23.01
23.88
0.645
0.645
0.645
0.645
0.750
16.38
16.38
16.38
16.38
19.05
0.400
0.400
0.522
0.725
0.725
10.16
10.16
13.26
18.42
18.42
0.984
1.312
1.857
2.500
2.406
24.99
33.32
47.17
63.50
61.11
36
D-SUBMINIATURE BACKSHELLS - TWO-PIECE
D*H SERIES
INDUSTRIAꢀ
EMI/RFI Shielded Diecast Backshells
9 and 15 Position
25 Position
37 and 50 Position
Dimensions
A
B
C
D
E
F
Shell Size
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
E
A
B
C
D
1.225
1.540
2.090
2.730
2.624
31.12
39.12
53.09
69.34
66.65
1.465
1.600
1.570
1.810
1.800
37.21
40.64
39.88
45.97
45.72
0.620
0.620
0.690
0.862
0.862
15.75
15.75
17.53
21.89
21.89
0.620
0.620
0.620
0.620
0.730
15.75
15.75
15.75
15.75
18.54
0.400
0.400
0.525
0.725
0.725
10.16
10.16
13.34
18.42
18.42
0.984
1.312
1.857
2.500
2.406
24.99
33.32
47.17
63.50
61.11
Ordering Information
D*H Two-Piece Backshells
Shell Size
Fits Standard
Density
Cable Entry
Style
RoHS
Compliant
Plastic
Cable Dia.
(in)
RoHS Compliant
Metallized
Plastic
Cable Dia.
(in)
Diecast
Metal
Cable Dia.
(in)
E
A
B
C
9
Straight (180º) DPH-E-003
Straight (180º)
.210-.320
.210-.320
.230-.450
.350-.650
DCH-E-003
DCH-A-003
DCH-B-003
DCH-C-003
.210-.350
.210-.350
.230-.450
.350-.640
DMH-E-003
DMH-A-003
.210-.320
.210-.320
.230-.450
.350-.650
15
25
37
Straight (180º) DPH-B-003
Straight (180º)
belfuse.com/cinch
37
D-SUBMINIATURE BACKSHELLS - SUPER D
SDH SERIES
INDUSTRIAꢀ
Features
ꢀ The Cinch Super D Interconnection System is a simple, fast, economical, and reliable way for mating connectors
from cable to cable or cable to panel.
ꢀ Snap-on Super D plastic hoods captivate connectors providing positive, self-latching, audible mating with reliable
retention and Latch-N-Lock quick release disconnect.
ꢀ Snap-on Super-D plastic hoods are also available with filler ends to utilize 4-40 mounting hardware.
ꢀ Black SDH backshells accommodate any standard metal shell IDC, solder cup, or crimp and poke D-subminiature
connector.
ꢀ Gray SDH backshells accommodate the Cinch All-Plastic IDC T-Series connector on page 15.
ꢀ Each Super-D plastic hood includes a stay band to strain relief the cable wire. Stay band tool SD-MSBT is
required.
Materials
Hood
Modified phenylene oxide - black for metal shell connectors or gray for all-plastic IDC connectors
Latch Block
Diecast zinc
Screws for Latching Blocks Steel with nickel plating
Stay Band Steel with zinc plating and clear chromate finish
38
D-SUBMINIATURE BACKSHELLS - FOR USE WITH
METAL SELL CONNECTORS SDH SERIES
INDUSTRIAꢀ
Straight (180º) Cable Entry Black Backshells for Metal Shell Connectors
Adapter Hood with Latches
Adapter Hood with Filler Ends
Right-Angle (90º) Cable Entry Black Backshells for Metal Shell Connectors
Right-Angle Adapter Hood
Dimensions
A
.ꢀ2ꢀ5 (.18mm)
mm
B
.ꢀ2ꢀ5 (.18mm)
mm
C
.ꢀ2ꢀ5 (.18mm)
D
.ꢀ2ꢀ5 (.18mm)
mm
E
.ꢀ2ꢀ5 (.18mm)
in mm
Positions
in
in
in
mm
-
in
9
1.47
1.80
2.35
2.99
37.34
45.72
59.69
75.95
.31
.31
.33
.37
7.87
7.87
8.40
9.40
-
1.94
2.25
2.94
3.59
49.21
57.15
74.61
91.28
1.25
1.34
1.50
1.53
31.75
34.13
38.10
38.89
01
21
37
.41
.47
.50
10.41
11.94
12.70
belfuse.com/cinch
39
D-SUBMINIATURE BACKSHELLS - FOR USE WITH
METAL SHELL CONNECTORS SDH SERIES
INDUSTRIAꢀ
Ordering Information
Straight (180º) Cable Entry Black Backshells for Metal Shell Connectors
(RoHS) Latches
Positions
Standard Cable Opening
SDHH-9BL
9
01
21
SDHH-15BL
SDHH-25BL
Latching Blocks for Super D Adapter System
Ordering Information
Description
For Panel Thickness
Qty per pack
Qty Required Per SDH
Hood
Catalog Number
Latching Block
N/A
Up to .060"
N/A
1 each
2 each
1 each
2 each
2 each
2 each
SD-LB
Latching Block with SEM Screws
Removable Mounting Screws for
Adapter Hood
SD-LB-060
4-40UNC2AX3/4
Latching Block with SEM Screws
Latching Block with SEM Screws
.060" to .080"
.080" to .125"
2 each
2 each
2 each
2 each
SD-LB-060-080
SD-LB-125
40
D-SUBMINIATURE BACKSHELLS - GRAY WITH
ALL-PLASTIC CONNECTORS SDH SERIES
INDUSTRIAꢀ
ꢀ Fits only T Series All-Plastic IDC connector on page 14.
Straight (180°) Cable Entry Gray Backshells for All-Plastic Connectors
Dimensions
A
.ꢀ2ꢀ5 (.18mm)
mm
B
.ꢀ2ꢀ5 (.18mm)
mm
C
.ꢀ2ꢀ5 (.18mm)
Positions
in
in
in
mm
-
9
1.47
1.80
2.35
2.99
37.34
45.72
59.69
75.95
.31
.31
.33
.37
7.87
7.87
8.40
9.40
-
01
21
37
.41
.47
.50
10.41
11.94
12.70
Ordering Information
Straight (180º) Cable Entry Gray Backshells for All-Plastic Connectors
Latches
Standard Cable Opening
SDH-9GL
Filler Ends
Standard Cable Opening
SDH-9GF
Filler Ends w/4-4ꢀ Screws
Large Cable Opening
N/A
Positions
9
01
21
37
SDH-15GL
SDH-15GF
SDH-15GFLCS
SDH-25GFLCS
SDH-37GFLCS
SDH-25GL
SDH-25GF
SDH-37GL
SDH-37GF
belfuse.com/cinch
41
D-SUBMINIATURE BACKSHELLS - GRAY USE WITH
ALL-PLASTIC CONNECTORS SDH SERIES
INDUSTRIAꢀ
Right-Angle (90°) Cable Entry Gray Backshells for All-Plastic Connectors
ꢀ Fits only IDC connector on pages 15.
Dimensions
A
.ꢀ2ꢀ5 (.18mm)
mm
B
.ꢀ2ꢀ5 (.18mm)
mm
C
.ꢀ2ꢀ5 (.18mm)
D
.ꢀ2ꢀ5 (.18mm)
in mm
Positions
in
in
in
mm
-
9
1.94
2.25
2.94
3.59
49.21
57.15
74.61
91.28
.31
.31
.33
.37
7.87
7.87
8.40
9.40
-
1.25
1.34
1.50
1.53
31.75
34.13
38.10
38.89
01
21
37
.41
.47
.50
10.41
11.94
12.70
Ordering Information
Right Angle (90º) Cable Entry Gray Backshells for All-Plastic Connectors
Latches
Positions
Standard Cable Opening
SDH-9RGL
9
01
21
37
SDH-15RGL
SDH-25RGL
SDH-37RGL
Ordering Information
Accessories for Gray Backshells
Positions
Optional Strain Reliefs* Additional Stay Bands**
9
SD-WC9
SD-WC15
SD-WC25
SD-WC37
SD-9-15-SB
SD-9-15-SB
SD-25-37-SB
SD-25-37-SB
01
21
37
* Two each required per backshell.
** Stay band tool #SD-MSBT required.
Screw for screwlocking connector assembly -(2 each required): 4-40UNC2ZX3/4.
42
D-SUBMINIATURE JUNCTION SHELLS
INDUSTRIAꢀ
Materials
Shell Material
Clamp
Zinc-plated low carbon steel with yellow chromate finish or RoHS clear chromate finish
Zinc-plated steel with yellow chromate finish
Zinc-plated steel with yellow chromate finish
Zinc-plated brass with yellow chromate finish
Screw
Stop Nut
Round Clamp
A
B
C
D
E
F
G
Shell Size
Positions
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
3.18
4.75
in
mm
A
B
15
25
1.531 38.89
2.078 52.78
.500
.500
12.70 1.312 33.32
12.70 1.852 47.04
.406
.593
10.31
.984
23.72
.125
.187
1.031 26.19
15.06 1.515 38.48
1.062 26.97
Right-Angle Clamp
A
B
C
E
F
G
H
Shell Size
Positions
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
7.14
7.14
7.14
7.14
8.71
E
A
B
C
D
9
1.203 30.56 0.718 18.24
.984
24.99
.437
.437
.437
.437
.562
11.10
11.10
11.10
11.10
14.27
.437
.437
.625
.812
.906
11.10
11.10
15.88
20.62
23.01
.468
.468
.468
.468
.531
11.89
11.89
11.89
11.89
13.49
.281
.281
.281
.281
.343
15
25
37
50
1.531 38.89 0.718 18.24 1.312 33.32
2.078 52.78 0.968 24.59 1.852 47.04
2.718 69.04 1.187 30.15 2.500 63.50
2.625 66.68 1.250 31.75 2.406 61.11
belfuse.com/cinch
43
D-SUBMINIATURE JUNCTION SHELLS
INDUSTRIAꢀ
eep Straight Clamp
Deep Straight Clamp
F ± .015
A
B
C
D
E
F
G
H
Shell
Size
Positions
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
9.53
7.92
in
mm
in
mm
E
A
B
C
D
9
1.203 30.56 .484 12.29 .984 24.99 .578 14.68 .375
9.53
.375
.750 19.05 1.219 30.96
.750 19.05 1.250 31.75
15
25
37
50
1.531 38.89 .484 12.29 1.312 33.32 .578 14.68 .713 18.11 .312
2.078 52.78 .484 12.29 1.852 47.04 .578 14.68 1.000 25.40 .312
2.718 69.04 .484 12.29 2.500 63.50 .578 14.68 1.375 34.93 .312
7.92 1.000 25.40 1.531 38.89
7.92 1.000 25.40 1.531 38.89
2.625 66.68 .593 15.06 2.406 61.11 .687 17.45 1.406 35.71 .406 10.31 1.125 28.58 1.656 42.06
Switching Shell
Switching Shell
A
B
C
Shell Size
Positions
in
mm
in
mm
in
mm
A
B
C
D
15
25
37
50
1.531
2.078
2.718
2.625
38.89
52.78
69.04
66.68
.500
.500
.500
.609
12.70
12.70
12.70
15.47
1.312
1.852
2.500
2.406
33.32
47.04
63.50
61.11
Ordering Information
Junction Shells - Metal
Yellow Chromate
RoHS Clear Chromate
Right-Angle Deep Straight
Shell Size
Fits Standard
Density
Round Clamp Right-Angle
Clamp
Deep Straight Switching Shell
Clamp
Clamp
Clamp
E
A
B
C
9
N/A
DE-19977-5
DE-24657
DA-24658
DB-24659
DC-24660
N/A
DE-19977-30
DA-19977-31
DB-19977-32
DE-24657-30
DA-24658-31
DB-24659-32
DC-24660-33
15
25
37
DA-19678-6
DB-19678-7
DB-20962
N/A
DB-19977-2
44
D-SUBMINIATURE PLASTIC HOODS
INDUSTRIAꢀ
All-Plastic Straight (180º) Hood
Shell Material: Nylon (gray).
#4-40 Screws: Steel with nickel plating.
A
B
C
D
E
F
G
Shell Size
Positions
in
mm
in
mm
in
mm
in
mm
in
mm
in
mm
7.14
9.14
in
mm
7.14
9.14
E
A
9
1.218 30.94 1.000 25.40
.984
23.72
.500
.500
12.70
12.70
.562
.562
14.27
14.27
.281
.360
.218
.360
15
1.546 38.27 1.000 25.40 1.312 33.32
Ordering Information
Plastic Hoods
Shell Size
Standard
Density
Straight
Hood
E
A
9
DE-51218-1
DA-51210-1
15
belfuse.com/cinch
45
D-SUBMINIATURE ACCESSORIES
INDUSTRIAꢀ
Dust Caps
ꢀ For use with all Cinch D-subminiature connectors.
ꢀ Used to protect connector contacts when connector is not mated.
ꢀ Made of polyethylene (black).
Ordering Information
Fits
A
B
C
D
Standard
Density
Fits Shell
Size
in
mm
in
mm
in
mm
in
mm
Catalog No. Description
E
E
A
A
B
B
C
C
D
D
9
DE-59-20
DE-60-20
DA-59-20
DA-60-60
DB-59-20
DB-60-20
DC-59-20
DC-60-20
DD-59-20
DD-60-20
Socket
Plug
.694
.749
17.63
19.02
25.95
27.36
39.67
41.52
56.13
57.99
53.75
55.35
.627
.682
15.93
17.32
24.25
25.65
37.97
39.83
54.43
56.29
52.04
53.64
.362
.412
.362
.412
.362
.430
.362
.430
.474
.536
9.19
10.46
9.19
.295
.345
.295
.345
.295
.365
.295
.363
.407
.469
7.49
8.76
7.49
8.76
7.49
9.22
7.49
9.22
10.34
11.91
9
15
15
25
25
37
37
50
50
Socket
Plug
1.022
1.077
1.562
1.635
2.210
2.283
2.116
2.179
.955
1.010
1.495
1.568
2.143
2.216
2.049
2.112
10.46
9.19
Socket
Plug
10.92
9.19
Socket
Plug
10.92
12.04
13.61
Socket
Plug
46
D-SUBMINIATURE ACCESSORIES
INDUSTRIAꢀ
Slide Lock Assemblies
ꢀ A slide lock assembly is a metal bracket offered with hardware necessary to mount into the standard connector
mounting holes. It consists of the lock retainer plate, two screws, two washers, and two nuts. Two lock posts are
required to fit into the mounting holes of the mating connector. These must be ordered separately.
ꢀ Compatible with all Cinch Backshells, Hoods, and Junction Shells except D*H Series, SDH Series, and phenolic
hood.
ꢀ Compatible with all Cinch metal shell D-subminiature connectors.
Materials
Slide Lock Plate
Stainless steel, passivated.
Slide Lock Hex Nut,
Washer #4-4ꢀ Screw
Steel with zinc plating and yellow chromate finish
Lockpost, Washer,
Steel with zinc plating and yellow chromate finish
Lockwasher, and Hex Nut
.145
Consists of Lock Retainer and two lock posts (order separately).
NOTE: Not compatible with D*H Series or SDH Series backshells.
Ordering Information
A
B
C
Fits Standard
Density
Fits Shell
Size
in
mm
in
mm
in
mm
Lock Retainer
DE-51224-1
DA-51220-1
DB-51221-1
DC-51222-1
DD-51223-1
E
A
B
C
D
9
1.442
1.770
2.293
2.958
2.847
36.63
44.96
58.24
75.13
72.31
.500
.500
.500
.500
.609
12.70
12.70
12.70
12.70
15.47
0.984
1.312
1.852
2.500
2.406
24.99
33.27
47.04
63.50
62.48
15
25
37
50
Lock Post: #D53018.Two (2) required with each Slide Lock Assembly.
belfuse.com/cinch
47
D-SUBMINIATURE HARDWARE ACCESSORIES
INDUSTRIAꢀ
Screwlocks
ꢀ Screwlocks are designed to retain the same size mated connectors together or to secure the connector to a rack/
panel. Screwlocks may be used on plugs or sockets.
ꢀ Female screwlocks consist of one #4-40 screw with a #4-40 hole in the top, two flat washers to accommodate
different panel thicknesses, one lockwasher, and one #4-40 nut. Military female screwlocks include three flat
washers.
ꢀ Male screwlocks consist of one #4-40 slotted screw and a spring tension clip. Different sizes accommodate the
various connector flange sizes and types of backshells or hoods (if applicable).
ꢀ Two screwlocks are required per connector.
ꢀ Military screwlocks meet all requirements of MIL-C-24308.
Materials
Commercial Screwlock Assemblies
Male Screwlock Assembly
Female Screwlock Assembly
Clip and screw are steel with zinc plating and yellow chromate finish – RoHS has clean chromate finish
Washers (2), lockwashers, hex nuts, and nuts are steel with zinc plating and yellow chromate finish
M24308 Military Screwlock Assemblies
Male Screwlock Assembly
Female Screwlock Assembly
Clip and screw are steel with cadmium plating and yellow chromate finish
Washers (3), lockwashers, hex nuts, and nuts are steel with cadmium plating and yellow chromate finish
Female Screwlock
Male Screwlock
48
D-SUBMINIATURE ACCESSORIES
INDUSTRIAꢀ
ꢀ Screwlock assemblies will not fit D*H or SDH Series backshells.
Male Screwlocks
Ordering Information
E
A
B
C
D
RoHS
Shell Size
A
B
9
01
21
37
1ꢀ
Positions
in
mm
in
mm
1.22
0.84
0.84
1.22
1.50
0.84
1.22
1.22
Commercial:
D2ꢀ409-46
D2ꢀ409-4ꢀ
D2ꢀ409-ꢀ
0.250
0.250
0.250
0.250
0.281
0.250
0.281
0.281
56.35
56.35
56.35
56.35
63.34
56.35
63.34
63.34
0.048
0.033
0.033
0.048
0.059
0.033
0.048
0.048
S*
P/S
P/S
S*
S*
P/S
P/S
S*
P/S*
S
P/S*
S
X
X
S
S
D2ꢀ409-06
D2ꢀ409-20
D2ꢀ42ꢀ-ꢀ
P/S*
P*
P/S*
P*
S
D2ꢀ42ꢀ-02
D2ꢀ42ꢀ-42
P/S*
P/S*
X
Military
MIL-C-243ꢀ8
M243ꢀ8/21-9F
M243ꢀ8/21-0ꢀF
Per MIL spec
Per MIL spec
P/S
P/S
P/S
P/S
P/S
NOTE: P=Plug, S=Socket
* Indicates use with junction shell
Female Screwlocks
Ordering Information
E
9
A
B
C
D
RoHS
Shell Size
Positions
A
01
21
37
1ꢀ
in
mm
70.32
141.55
Commercial:
D2ꢀ408-42
D2ꢀ408-39
0.312
0.628
P/S
P/S
P/S
P/S
P/S
P/S
P/S
P/S
P/S
X
X
P/S
Military
MIL-C-243ꢀ8
M243ꢀ8/26-0F
Per MIL spec
Per MIL spec
P/S
P/S
P/S
P/S
P/S
P/S
P/S
P/S
P/S
P/S
M243ꢀ8/26-2F
NOTE: P=Plug, S=Socket
belfuse.com/cinch
49
D-SUBMINIATURE IDC TERMINATION TOOLS
INDUSTRIAꢀ
Super D™ Manual Stay Band Tool
Designed for applying the steel stay band/strain relief to the cable before
termination of wires to the connector, the manual Stay Band Tool applies
both stay band sizes to the full range of cable sizes.
Part No. SD-MSBT
Manual Tool
Uni-Clinch™ D Single-Wire Hand Insertion Tool
Designed to insert one 22-26 AWG wire at a time, Uni-Cinch D is used as a
field repair tool by field service engineers.
Part No.: SD-UC
Uni-Clinch Hand
Insertion Tool
NOTE: All termination tools on this page are used in conjunction with T* Series D-subminiature connectors.
50
D-SUBMINIATURE CRIMP AND POKE
TERMINATION TOOLS
INDUSTRIAꢀ
Metal Shell High-Reliability Crimp and Poke Termination Tool
Hand crimping tool for high-reliability machined D*U, Series 3, and M24308
Crimp and Poke contacts.
M22520/2-01
NOTE: Positioner required with crimping tool
M22520/2-01
Positioner ––
A device when attached to a crimping tool that locates the contact in the correct position.
Positioner for machined contacts
D*U Series Positioner
Part No.: 599-11-11-580
Catalog No.: EP-580
Series 3 and M24308 Connector Positioner
Part No.: 598-98-97-618
Catalog No.: M22520/2-08
Metal Shell Military Crimp and Poke Insertion/Extraction Tool
For inserting or extracting machined D*U, Series 3, or M24308 Crimp and
Poke contacts.
Part No.: CIET-20-HD
CIET-20-HD
Military Extraction Tip Only
For extracting high-reliability machined D*U, Series 3, or M24308 Crimp and
Poke contacts.
Part No.: CET-20-11
CET-20-11
belfuse.com/cinch
51
相关型号：
M24308/4-302F
D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Crimp Terminal, Hole .087-.098, Receptacle
BEL
M24308/4-304F
D Type Connector, 25 Contact(s), Male, 0.109 inch Pitch, Crimp Terminal, Hole .087-.098, Receptacle
BEL
M24308/4-306F
D Type Connector, 50 Contact(s), Male, 0.109 inch Pitch, Crimp Terminal, Hole .087-.098, Receptacle
BEL
©2020 ICPDF网 联系我们和版权申明