MBC300-1T48G [BEL]
AC-DC Regulated Power Supply Module, 200W,;型号: | MBC300-1T48G |
厂家: | BEL FUSE INC. |
描述: | AC-DC Regulated Power Supply Module, 200W, 输出元件 |
文件: | 总5页 (文件大小:761K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The MBC300 Series of open-frame medical power supplies, with its
wide universal 90-264 VAC input range, is available at 300 W of output
power and a variety of single output voltages.
The MBC series was designed to 4th edition medical approvals and
provides 2x MOPP (Means of Patient Protection) isolation for Class I
and Class II installations.
These medical power supplies are ideal for monitoring, home health
equipment as well as surgical devices.
200 W convection cooled
-20 to 50°C full load operation
2x MOPP
5.0 x 3.0 x 1.5 inch (127.0 x 76.2 x 38.1 mm)
12 V fan & 5 V standby outputs
Inhibit and Power Good signals
No minimum load required
IEC Protection Class Options:
o
Class I: Earth pin J4 (no suffix)
Class II: No Earth pin (-2 suffix)
o
Conducted EMI EN 55022-B, FCC Part 15 Level B
Medical Safety Agency Approvals
RoHS Compliant
CE marked
Diagnostic
Drug Pump
Dialysis
Home Health Care
Monitoring
Imaging
2
MBC300 Series
OUTPUT
VOLTAGE
MAX LOAD
MAX LOAD
MINIMUM RIPPLE &
LOAD
TOTAL
REGULATION
MODEL
CONNECTOR
CONVECTION 1,2,3 300 LFM 1,2,3
NOISE 4
MBC300-1T05G
MBC300-1T05G-2
MBC300-1T12G
MBC300-1T12G-2
MBC300-1T15G
MBC300-1T15G-2
MBC300-1T24G
MBC300-1T24G-2
MBC300-1T30G
MBC300-1T30G-2
MBC300-1T48G
MBC300-1T48G-2
Cover-300-XCB
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
5 VDC
28.0 A
28.0 A
16.67 A
16.67 A
13.33 A
13.33 A
7.5 A
40.0 A
40.0 A
25.0 A
25.0 A
20.0 A
20.0 A
13.54 A
13.54 A
10.83 A
10.83 A
6.77 A
6.77 A
0 A
2%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
5 VDC
0 A
0 A
0 A
0 A
0 A
0 A
0 A
0 A
0 A
0 A
0 A
2%
2%
2%
2%
2%
2%
2%
2%
2%
2%
2%
12 VDC
12 VDC
15 VDC
15 VDC
24 VDC
24 VDC
30 VDC
30 VDC
48 VDC
48 VDC
7.5 A
6.0 A
6.0 A
3.75 A
3.75 A
Metal cover kit accessory
NOTES:
1
Peak current rating on main output is 120% of max., lasting < 30 s with a maximum 10% duty cycle.
Combined output power of main output, fan supply and standby supply shall not exceed max. power rating.
Derate output power linearly to 80% from 90 VAC to 80 VAC input.
2
3
4
Ripple is peak to peak with 20 MHz bandwidth and 10 μF (Tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line
voltage and load ranges.
Specifications are for nominal input voltage, 25°C unless otherwise stated.
PARAMETER
Input Voltage
DESCRIPTION / CONDITION
SPECIFICATION
90-264 VAC / 120-390 VDC
47 to 63 Hz
Universal
Input Frequency
120 VAC
230 VAC
3.2 A max
1.65 A max
Input Current
120 VAC
230 VAC
35 A max
65 A max
Inrush Current
< 125 μA
<250 μA
80 kHz typical
35 to 250 kHz, 90 kHz typical
120 VAC
230 VAC
PFC converter (fixed)
Resonant converter (variable)
Leakage Current
Switching Frequency
PARAMETER
DESCRIPTION / CONDITION
SPECIFICATION
Output Power
200 to 325 W
120 VAC
230 VAC
88% typical
92% typical
Efficiency
Hold Up Time
Power Factor
120 / 230 VAC
10 ms
120 VAC
230 VAC
0.98
0.95
Line Regulation
Load Regulation
Transient Response
Rise Time
+/-0.5%
+/-2%
50% to 100% load change, 50 Hz, 50% duty cycle, 0.1 A/μs,
< 10%, recovery time < 5 ms
< 100 ms
tech.support@psbel.com
3
MBC300 Series
Set Point Tolerance
± 1%
Voltage Output Adjustment
± 3 %
Over Voltage Protection
Over Current Protection
Short Circuit Protection
Over Temperature Protection
Automatic recovery
110 to 150 %
110 to 150 %
Short term, automatic recovery
Automatic Recovery
110° C primary heat sink
NOTES:
1
Standby output voltage tolerance including set point accuracy, line and load regulation is +/-10%. Ripple and noise is less than 5%.
Fan supply output voltage tolerance including set point accuracy, line and load regulation is +/-30% and needs min. 1% load on main
output to be within regulation band. Ripple and noise is less than 10%.
2
PARAMETER
DESCRIPTION / CONDITION
SPECIFICATION
Refer to de-rating curves (Fig. 1)
Start-up is guaranteed
-20 to 70°C
-20 to 0°C
Operating Temperature
Storage Temperature
-40 to 85° C
5 V model 140 W max
12 V, 15 V, 24 V, 30 V & 48 V models 200 W max
Convection:
Cooling*
5 V model 200 W max
With 300LFM:
12 V and 15 V models 300 W max
24 V, 30V and 48 V models 325 W max
Relative Humidity
Altitude
Non Condensing
95% Rh
Operating:
Non-Operating:
10,000 ft.
40,000 ft.
Reliability
MTBF according to Telcordia –SR332-issue 3
1.77 million hours
* Refer de-rating curves (Fig. 1) to determine output power over the entire operating temperature range
Figure 1. Output Power Vs. Temperature Derating Curves
NOTE: The de-rating curves are valid for input voltages of 115 VAC to 264 VAC. Below 115 VAC to 90 VAC the convection rating is 180 W max.
North America
Asia-Pacific
Europe, Middle East
+1 408 785 5200
+86 755 298 85888
+353 61 225 977
© 2017 Bel Power Solutions & Protection
BCD.00290_AD
4
MBC300 Series
PARAMETER
DESCRIPTION / CONDITION
SPECIFICATION
Class II product meets Class A limit
line for conducted emission.
Conducted Emissions
EN55022-B, CISPR22-B, FCC PART15-B
Radiated Emissions
Harmonic Current
Static Discharge
EN55022-B, CISPR22-B, FCC PART15-B
EN61000-3-2
To be controlled in end system
Class D
Level-3
Level-3
Level-3
Level 3
95%
EN61000-4-2
RF Field Susceptibility
Fast Transients/Bursts
Surge Susceptibility
Humidity
EN61000-4-3
EN61000-4-4
EN61000-4-5
Non Condensing
Operating:
Non-Operating:
10,000 ft.
40,000 ft.
Altitude
PARAMETER
DESCRIPTION / CONDITION
SPECIFICATION
Isolation Voltage
Input to Output:
4242 VDC min
Approved to the latest edition of the following standards:
CSA/UL60601-1, EN60601-1 and IEC60601-1.
Safety Standards
Agency Approvals
CE mark
Nemko, Nemko-CCL
Complies with LVD Directive
PARAMETER
Power Good *
Remote On/ Off
Remote Sense
DESCRIPTION / CONDITION
TTL signal goes high after main output is within regulation band, delay is 0.1 to 0.3 s
To turn on PSU short remote pin to ground
Compensates for 200 mV cable drop
NOTE: Power good signal cannot be used as a current source. Internal pull up resistor from PG signal to 5 V is 10K.
It is recommended to use external transistor if intended to source current.
CONNECTOR
PIN
DESCRIPTION / CONDITION
MANUFACTURER / PN
Pin 1
Pin 2
AC LINE
AC NEUTRAL
Molex: 26-60-4030
Mating: 09-50-3031; Pins: 08-50-0106
AC Input Connector
J1
6-32 inches Screw Pan HD
Mating: Designed to accept Ring Tongue Terminal AMP : 8-31886-1,
wherein one 16 AWG (max) wire can be crimped.
Note: One Ring Tongue Terminal with 16 AWG is recommended for
current up to 11 A only.
Pin 1
Pin 2
RTN
V1
DC Output Connector
J2
Use multiple tongue terminals with wire for more current.
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
REMOTE ON/OFF
RTN
VFAN (+12 V/0.5 A)
-VE REMOTE SENSE
VSTBY (+5 V/2 A, +/-5%)
+VE REMOTE SENSE
RTN
POWER GOOD
Spade Connector
(Class I product only)
Molex: 22-23-2081
Mating: 22-01-2087; Pins: 08-50-0113
Signals & Aux Power
J3
J4
Molex: 19705-4301
Mating: 190030001
Earth
NOTE: PSU is supplied with J3 housing, pin-1 and pin-2 shorted to enable main output without remote on/off feature.
tech.support@psbel.com
5
MBC300 Series
PARAMETER
Weight
DESCRIPTION / CONDITION
450 g (0.99 lbs)
Dimensions
127.0 x 76.2 x 38.1 mm (5.0 x 3.0 x 1.5 inch)
Figure 2. Mechanical Drawing
NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following:
1
2
3
Stand off, used to mount PCB has OD of 5.4 mm max.
Screws, used to fix PCB on stand off, have head dia of 6.0 mm max.
Washer, if used, to have dia of 6.5 mm max.
NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
North America
Asia-Pacific
Europe, Middle East
+1 408 785 5200
+86 755 298 85888
+353 61 225 977
© 2017 Bel Power Solutions & Protection
BCD.00290_AD
相关型号:
©2020 ICPDF网 联系我们和版权申明