MPB150-2024G [BEL]
AC-DC Regulated Power Supply Module, 2 Output, 150W, Hybrid, ROHS COMPLIANT;
| 型号： | MPB150-2024G |
| 厂家： | 
BEL FUSE INC. |
| 描述： | AC-DC Regulated Power Supply Module, 2 Output, 150W, Hybrid, ROHS COMPLIANT |
| 文件： | 总5页 (文件大小：970K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The MPB150 Series incorporates patented high
efficiency circuitry, high power density and
active Power Factor Correction (PFC) to meet
the requirements of networking and data
ommunications systems, as well as commercial
industrial configurations.
MPB150’s deliver a regulated main output plus a
second 12V output for fans or other system
functions. The MPB150 is rated for convection
as well as forced-air cooling. Full output power
is available with as few as 15 Cubic Feet per
Minute (CFM) forced-air cooling.
The MPB150 product line is approved to the
latest international regulatory standards, and
displays the CE Mark.
RoHS Compliant for All Six Substances
High Power Density
Industry-Standard 3" x 5" Footprint
Power Factor Correction (PFC) Meets
EN61000-3-2
Main Output Remote Sense
Power Good Signals
CE Marked to Low Voltage Directive
Input Transient & ESD Compliance to
EN61000-4-2/-3/-4/-5
North America
+1-866.513.2839
Asia-Pacific
+86.755.29885888
Europe, Middle East
+353 61 225 977
tech.support@psbel.com
© 2015 Bel Power Solutions, Inc.
BCD.00605_AA
MPB150 Dual-Output AC-DC Series
OUTPUT
MAXIMUM OUTPUT
TOTAL REGULATION RIPPLE & NOISE 1
REGULATION
RANGE
MODEL
VOLTAGE [V] CURRENT (AMPS), 130 LFM
[%]
% pk-pk
+12V
12V
12.5A
0.5A
6.0A
0.5A
3.1A
0.5A
±3%
1%
11.64V to 12.36V
11.40V to 12.60V
23.28V to 24.72V
11.40V to 12.60V
46.56V to 49.44V
11.40V to 12.60V
MPB150-2012G 2, 3, 4
±5%
±3%
±5%
±3%
±5%
1%
1%
1%
1%
1%
+24V
12V
MPB150-2024G 2, 3, 4
MPB150-2048G 2, 3, 4
+48V
12V
NOTES:
1
Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth.
Maximum forced-air output power is 150 watts with 15 CFM airflow.
Maximum convection output power is 70 watts.
2
3
4
V2 is isolated from V1 and can be used as a negative or positive output.
PARAMETER
CONDITIONS/DESCRIPTION
Continuous input range
AC Input
MIN
90
NOM
MAX
264
63
UNITS
VAC
Hz
Input Voltage- AC
Input Frequency
47
Lowest AC input voltage that regulation is maintained with full rated
loads
Brownout Protection
90
17
VAC
Hold-up Time
Input Current
Over full AC input voltage range at full rated load
90 VAC at full rated load
ms
2.2
ARMS
Non-user serviceable internally located AC input line fuse, 250 VAC,
3.15A
Input Protection
110VAC:
220VAC:
23
46
Inrush Surge Current
Internally limited by thermistor, one cycle, 25°C
APK
Power Factor Circuitry
Operating Frequency
Active PFC meets requirements of EN61000-3-2
Switching frequency of main transformer
45
kHz
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
Full Load, 230VAC. Varies with distribution of loads among outputs.
Efficiency
75
80
85
%
V1 load for full regulation on V2. All models operate at no load
without any damage and meet all specs on V1 above 0 amps.
Minimum Loads
5
Watts
Full load, 20 MHz bandwidth
Ripple and Noise
See Model Selection Chart
Watts
At 15 CFM forced-air cooling. See Application Note for details.
Convection: Consult Factory.
150
Output Power (Note 1)
Overshoot /Undershoot
Output voltage overshoot/undershoot at turn-on
10
%
Varies by output. Total regulation includes: line changes from 85-132
VAC or 170-264 VAC, changes in load starting at 20% load and
changing to 100% load.
Regulation
See Model Selection Chart
Maximum deviation due to a 25% load change with unit at 75% load.
Time required for initial output voltage stabilization
Transient Response
Turn-on Delay
3
%
0.2
0.2
1.5
20
Sec
ms
Time required for output voltage to rise from 10% to 90%
Turn-on Rise Time
866.513.2839
tech.support@psbel.com
© 2015 Bel Power Solutions, Inc.
BCD.00605_AA
MPB150 Dual-Output AC-DC Series
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
MPB150-2012G
MPB150-2024G
MPB150-2048G
13.5
26.9
57.6
16.5
31.1
62.4
Overvoltage Protection
V1 output
VDC
Fully protected against output short circuit or overload.
Automatic recovery upon removal of overload condition.
Overload Protection
Remote Sense (Note 1)
Total (+sense and -sense) voltage compensation for cable losses.
500
500
mV
AC/DC indicator - This signal indicates the status of the AC input or DC
outputs. When there is sufficient AC voltage and the outputs are
operating normally, an open collector signal is provided.
Turn-On delay time from application of AC:
Warning time before outputs go out of regulation:
Warning time before outputs deviate ±10% from the nominal value:
Sink Current
50
5
15
Power Good Signal
ms
20
30
mA
V
Pull-up Voltage
Provided on dual-output models. Open collector signal intended to drive
an LED.
Closed collector occurs when the Power Good Signal is in its open
Power Supply OK Signal
Thermal Shutdown
collector state.
Sink Current
20
30
mA
V
Pull-up Voltage
Protected against overtemperature conditions.
Unit recovers when overtemperature condition is removed.
Up to 4 units can be connected in parallel.
There are some limits for parallel operation. See Applications Note.
N+1 redundancy is provided. V2 needs an external isolation diode for
N+1 operation.
Current Share
Isolation Diode
Internal isolation diode is provided on V1.
NOTES: 1) Negative (-) sense must be connected to output common or load common for proper power supply operation.
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
Approved to latest edition of the following standards: UL/CSA60950-1,
IEC60950-1 and EN60950-1.
Agency Approvals
Input to Chassis
Input to Output (Tested by manufacturer only)
2121
4242
VDC
VDC
Dielectric Withstand Voltage
Electromagnetic Interference EN55022 Conducted. Class A
6
8
dB
kV
ESD Susceptibility
Flicker
Per EN61000-4-2, Level 4
Per EN61000-3-3
Radiated Susceptibility
EFT/Burst
Per EN61000-4-3
3
V/m
kV
Per EN61000-4-4
1
Per EN61000-4-5, Level 3,
2 kV (Line-to-Gnd) minimum, 1 kV (Line-to-Line) minimum.
Input Transient Protection
RF Immunity
Per EN61000-4-6. 0.15 to 80 MHz (1 kHz sinewave)
Per EN61000-4-8
3
1
V/m
A/m
Magnetic Fields
Voltage Dips
Per EN61000-4-11
MΩ
Insulation Resistance
Leakage Current
Input to output.
10
Per EN60950 (264 VAC)
1.0
mA
866.513.2839
tech.support@psbel.com
© 2015 Bel Power Solutions, Inc.
BCD.00605_AA
MPB150 Dual-Output AC-DC Series
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
Operating
Non-Operating
10K
50K
50
Altitude
ASL Feet
°C
Derate linearly from 50 to 70°C to 50% power at 70°C. At 100% load:
MPB150 models will operate at -20°C, but will not meet all
specifications.
0
Operating Temperature
Storage Temperature
-40
85
°C
Forced-air cooling of 15 CFM is required for full output power. Air
velocity is measured with power supply mounted on 0.375" (9.5mm)
standoffs.
Forced-Air Cooling
Airflow direction is from the input section to the output section.
See Application Note for details.
Temperature Coefficient
Relative Humidity
Included in total regulation of outputs.
Non-Condensing
5
85
%RH
Gpk
Operating: 11 ±3ms, 3 axes, Half Sine
Non-operating: 11 ±3ms, 3 axes, Half Sine
15
40
Shock
Operating: Random vibration, 5-500 Hz, 10 minutes each axis.
Non-Operating: Random vibration, 5-500 Hz, 10 minutes each axis.
2.4
6.0
Vibration
GRMS
Figure 1 - Mechanical Drawing MBP150 (-2012G, -2024G & -2048G Models)
866.513.2839
tech.support@psbel.com
© 2015 Bel Power Solutions, Inc.
BCD.00605_AA
MPB150 Dual-Output AC-DC Series
MPB150-2012G, -2024G, -2048G
Housing
Pins
09-50-8031
08-52-0113
09-50-8061
08-52-0113
22-01-3067
08-50-0114
22-01-3027
08-50-0114
J1
J2
J3
J4
Housing
Pins
Housing
Pins
Housing
Pins
NOTE: Part numbers are MOLEX; equivalents are acceptable.
NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support
systems, equipment used in hazardous environments, or nuclear control systems.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending
on the date manufactured. Specifications are subject to change without notice.
866.513.2839
tech.support@psbel.com
© 2015 Bel Power Solutions, Inc.
BCD.00605_AA
相关型号：
©2020 ICPDF网 联系我们和版权申明