NGL-16.5W-48V-3.3V [BEL]
DC-DC Regulated Power Supply Module, 1 Output, 16.5W, Hybrid;型号: | NGL-16.5W-48V-3.3V |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 16.5W, Hybrid |
文件: | 总10页 (文件大小:214K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NGL-16.5W-48V-3.3V
16.5W DC-DC Converter
Features
•
•
•
•
•
•
•
•
•
•
Wide Input Voltage Range (19.2 – 72 Vdc)
Output 3.3V @ 5A
Size 2.0”L x 2.0”W x 0.5”H
High Efficiency, typically 85% at 3.3V Output
Adjustable Output Voltage
Low Ripple and Noise
Input to Output Isolation at 1500Vdc
Metal Base Plate
Fixed Frequency (270 KHz)
Synchronization to External Secondary
Clock
Description and Applications
•
•
Under Voltage Lockout (UVLO)
Operating Amb. Temperature -40/+85°C with
no derating
The NGL 16.5W dc-dc Converter is part of NG
Series, which represents the Magnetek’s Family
of High Efficiency Low Power Dc-Dc Converters.
These modules feature high reliability, high
efficiency and a widely varying range of input
voltages (from 19.2 to 72 Vdc) with the
possibility of a careful regulation of output
voltage, so they are ideally suited for
•
•
No Forced Cooling Needed
KEMA, CSA Approvals
Telecommunications, Industrial and Computer
applications.
The compact size makes them ideal for inclusion
in original design of systems demanding small
size, low cost and high reliability.
The standard feature set includes output trim
allowing the user to adjust the output voltage to
a value within ±10% of the nominal output
voltage, and the clock input for synchronization
to an external secondary clock, while the case
ground pin is optional.
Revision 1.A
Magnetek
Page 1 of 10
NGL-16.5W -48V -3.3V DC-DC Converter
Specifications
(Typical value standard at nominal input line, full load, 25°C ambient temperature unless otherwise specified)
Electrical Specifications Table 1. Output Specifications
Output Voltage (Vo)
Conditions
Value
3.3V
Output Voltage Trimming
Voltage Accuracy
See Note 1
+/-10%
+/-0.5%
1% max
+/-1.0%
+/-0.5%
2000µF
50mVpk-pk
Start-up Overshoot
Load Regulation
Low Load to Full Load
Low Line to High Line
Line Regulation
Admissible Capacitive Load
Ripple and Noise Voltage
Vimin…Vimax; Io=Ionom
(20MHz BW)
See Note 2
Temperature Coefficient (Tc)
Switching Frequency
< 0.02%/°C
270kHz
∆Vo/∆T
Fixed
Transient Response
Io=1A to 4A to 1A
dIo/dt= 1A/µs, Vi=48V
Deviation
+/- 100mV max
100µs max
Settling Time
(response within +/-1% Vo)
See Note 3
Electrical Specifications Table 2. Input Specifications
Nominal Input Voltage (Vinom)
Conditions
Value
48V
Input Voltage Range
Io=0…Ionom
See Note 4
19.2-72V
Maximum Input Current (Iimax)
Input Reflected Ripple Current
Vi=19.2V; Io=Iomax
See Note 5
1A
Io=0…Ionom
30mApk-pk
Inrush Current
No Load Input Current
Rise Time
< 1A2sec
40mA
Vimin…..Vimax., Io=0
Vinom, Io=Ionom
Resistive Load
5ms
12ms
Capacitive Load (2000µF)
Electrical Specifications Table 3.
Isolation Specifications
Isolation Voltage
Conditions
Value
In/Out
In/Case
1500Vdc
1500Vdc
500Vdc
Out/Case
See Note 6
Isolation Capacitance
Isolation Resistence
Operating Range Temperature
Storage Temperature
1500pF
> 10MΩ
-40/+85°C
-50/+115°C
Maximum Rating
Maximum Rating
Revision 1.A
Magnetek
Page 2 of 10
NGL-16.5W -48V -3.3V DC-DC Converter
General Specifications
Efficiency
Conditions
Value
85%
Cooling
Free Air Convection
< 5°C/W
Thermal Resistance (θjc)
Case Material
metal
five-sided case
Weight
MTBF
60g
BELLCORE 332 (40°C case)
Pending
1500000 hr.
EN60955
Approvals and Homologations
UL1950
CSA950, CE
5% to 95% RH
Relative Humidity
Non condensing
Protections
NOTES:
Current Protection
hiccup mode
5.5A +/- 10%
Overcurrent Protection Threshold
Input Undervoltage Protection
Vinom
See Note 7
1
Output voltage trim allows the user to adjust the output voltage to a pre-defined value within ±10% of the nominal output voltage.
If an external resistor (RTdown) is connected between the Trim and -Vout pins, the output voltage decreases (see wiring * in Figure 3 ).
If an external resistor (RTup) is connected between the Trim and +V pins, the output voltage increases (see wiring ** in Figure 3).
2
3
4
5
Measured with capacitance an external capacitance C = C1+C2 = 100nF(ceramic) + 10µF (Electrolytic)
No external output capacitance.
The module is provided with hysteretic control of input line between 19.2V - 72V.
CAUTION: To preserve the module’s flexibility, internal fusing is not included; however, to achieve the maximum system protection, input
fusing is always highly recommended based on inrush current and maximum input current.
6
7
1500Vdc between input and output pins both in short circuit state
1500Vdc between input short circuited pins and the case
500Vdc between output short circuited pins and the case
The lockout circuitry turns the module off when the input voltage is below 17.5V
DC/DC Power
Module
+Vout
Trim
Rtup
+Vin
-Vin
-Vout
-Vout
Rtdown
Ck-Input
– Basic wiring for external output Trimming
Revision 1.A
Magnetek
Page 3 of 10
NGL-16.5W -48V -3.3V DC-DC Converter
Characteristic Curves
This section provides typical characteristics for NGL Converter module as Input/Output Characteristics, Efficiency,
Rise Time, Output Ripple Voltage and Transient Response to load variation from 50% to 75% of Full Load.
Rise Time
Conditions: Clock = open, Vin = 48V, Io =5A,Ta =25°C
Resistive Load
Capacitive Load = 2000µF
Converter start up time
Conditions: Clock=open Vin=19.2V Io=5A Ta=25°C
Revision 1.A
Magnetek
Page 4 of 10
NGL-16.5W -48V -3.3V DC-DC Converter
Ripple and Noise
Conditions: Clock=open
Conditions: Clock=open
Vin=72V Io=5A Ta=25°C
Vin=19.2V Io=5A Ta=25°C
Revision 1.A
Magnetek
Page 5 of 10
NGL-16.5W -48V -3.3V DC-DC Converter
Transient Response
Output voltage response to step change in load
Output voltage response to step change in load
current.
current.
Io=2.5A to 5A to 2.5A Freq.=500Hz Vin=19.2V
Ta=25°C
Io= 2.5A to 5A to 2.5A Freq.=500Hz Vin=19.2V
Ta=25°C
Output voltage response to step change in load
current.
Io= 2.5A to 5A to 2.5A Freq.=500Hz Vin=19.2V
Ta=25°C
Revision 1.A
Magnetek
Page 6 of 10
NGL-16.5W -48V -3.3V DC-DC Converter
Feature Descriptions
Current Limit
For protection in a output overload condition, the converter is equipped with hiccup current limit protection so that it is
able to work on short circuit condition for an indefinite time over the operating temperature range.
The converter will auto recover once the fault is removed.
Synchronization
The Ck_Input Pin allows the synchronization of the fixed switching frequency to an external clock. This function is
compatible with a 3.3Vpp signal, coupled through a 1nF capacitor on a impedance ≥3kohm.
However the power supplier start-up even without any sync. clock.
Revision 1.A
Magnetek
Page 7 of 10
NGL-16.5W -48V -3.3V DC-DC Converter
Revision 1.A
Magnetek
Page 8 of 10
NGL-16.5W -48V -3.3V DC-DC Converter
DIMENSIONS
DIMENSIONSARE IN INCHESAND (MILLIMETERS)
TOLERANCE: x.xx± 0.02 in. (0.5 mm), x.xxxTOLERANCE: x.xx ± 0.01 in. (0.25 mm)
PINS: 0.04 in. (1.00 mm) Dia
0.40 x3
0.50
(10.16)
(10.16 x3)
(12.7)
0.008
(0.20)
SO LDER- PLATED BRASS
4 PLC S (+ Vo u t, Trim, -Vout)
7
6
5
4
SIDE LABEL INCLUDES:
PRO DUC T CODE, ....
SO LDER- PLATED BRASS
3 PLCS(+ Vin, -Vin, Cloc k inp ut)
1
2
3
0.15
(3.81)
0.20
(5.08)
0.20
0.90
(22.86)
(5.08)
2.00
(50.80)
BOTTOM VIEW
SIDE VIEW
PIN CONNECTIONS
FUNC TION
PIN NO.
1
2
3
4
5
6
+ Vin
- Vin
Clockinput
- Vout
- Vout
+ Vout
Revision 1.A
Magnetek
Page 9 of 10
NGL-16.5W -48V -3.3V DC-DC Converter
Order Code: NGL-16.5W-48V-3.3V
For additional information, please contact:
Europe - Magnetek PEG- Power Electronics Group - S. p. A
Via S.Giorgio 642- 52028- Terranuova B.ni, Arezzo, Italy
Phone: (+39) 055.9195.1
Fax: (+39) 055.9195.248
U.S.A. - Magnetek PEG
8966 Mason Avenue - Chatsworth, California - 91311,USA
Phone: (+1) 818.727.2216
Fax: (+1) 818.727.2276
Toll-Free Number: (+1) 800.621.0733
Internet Address:
- hppt:// www.magnetekpower.com
We reserve the right to amend specifications and designs at any time under our policy of constant product
improvement.
Revision 1.A
Magnetek
Page 10 of 10
相关型号:
©2020 ICPDF网 联系我们和版权申明