PSL5A11-2R [BEL]
DC-DC Regulated Power Supply Module, 1 Output, METAL, CASE L04, MODULE;型号: | PSL5A11-2R |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 1 Output, METAL, CASE L04, MODULE |
文件: | 总19页 (文件大小:1093K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PSC, PSL Series Data Sheet
Positive Switching Regulators
107
4.2"
3 U
32
1.3"
88
3.5"
151
5.9"
168
37
1.5"
8 TE
6.6"
Features
• RoHS lead-free-solder and lead-solder-exempted
products are available
• Input voltage up to 144 VDC
• Single output of 3.3 to 48 VDC
• No input-to-output isolation
• High efficiency up to 97%
• Extremely wide input voltage range
• Low input-to-output differential voltage
• Very good dynamic properties
Description
The PSC and PSL Series positive switching regulators are
designed as power supplies for electronic systems, where no
input-to-output isolation is required. Their major advantages
include a high level of efficiency, high reliability, low output
ripple, and excellent dynamic response. Models with input
voltages up to 144 V are specially designed for secondary
switched and battery-driven mobile applications. The
converters are suitable for railway applications according to
EN 50155 and EN 50121.
• Input undervoltage lockout
• Output voltage adjustment and inhibit function
• Continuously no-load and short-circuit proof
• All boards are coated with a protective lacquer
Two type of housings are available allowing operation up to
71 °C. The PSC Series is designed for wall or chassis
mounting with faston connections, whereas the PSL Series is
designed for insertion into a 19" DIN-rack and exhibits a H11
connector.
Safety-compliant to IEC/EN 60950-1 and UL/CSA
60950-1 2nd Ed.
Various options are available to adapt the converters to
different applications.
Table of Contents
Page
Page
Electromagnetic Compatibility (EMC) ................................. 13
Immunity to Environmental Conditions ............................... 14
Mechanical Data ................................................................. 15
Safety and Installation Instructions ..................................... 16
Description of Options ........................................................ 17
Accessories......................................................................... 18
Description ............................................................................ 1
Model Selection .................................................................... 2
Functional Description .......................................................... 5
Electrical Input Data.............................................................. 6
Electrical Output Data ........................................................... 8
Auxiliary Functions .............................................................. 11
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 1 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Model Selection
Table 1: PSC Series
Output
voltage
Output
current
Io nom [A]
Operating input
voltage range
Vi [V]
Nom. input
voltage
Efficiency2
min [%] typ [%]
Type
Options
designation
Vo nom [V]
Vi nom [V]
η
η
3.3
12
7– 40
20
77
PSC3E12-2
i, R, G
5.1
5.1
5.1
12
12
12
15
15
15
24
24
24
10
11
12
6
8
9
6
8
9
6
8
9
8 – 80
8 – 40
7 – 40
40
20
20
60
40
30
60
40
30
60
40
40
77.5
78
79
PSC5A10-9iR
-7, L, P, C, D, D1, G
79
PSC5A11-2
i, R, G
83.5
85.5
PSC5A12-9iR
-7, L, P, C, D, D1, G
18 – 144 1
15 – 80
88
88
89
89
90
91
93
93
94
89
90
90
PSC126-9iR
PSC128-9iR
PSC129-2
PSC156-9iR
PSC158-9iR
PSC159-2
PSC246-9iR
PSC248-9iR
PSC249-2
-7, L, P, C, D, D1, G
-7, L, P, C, D, D1, G
i, R, G
-7, L, P, C, D, D1, G
-7, L, P, C, D, D1, G
i, R, G
-7, L, P, C, D, D1, G
-7, L, P, C, D, D1, G
i, R, G
15 – 40
22 – 144 1
19 – 80
91
92.5
93.5
19 – 40
31 – 144 1
29 – 80
94
95
96
29 – 60
36
6
44 – 144 1
42 – 80
80
95
96
PSC366-9iR
-7, L, P, C, D, D1, G
36
8
60
95
96.5
PSC368-9iR
-7, L, P, C, D, D1, G
48
6
58 –144 1
80
96
97
PSC486-9iR
-7, L, P, D, D1, G
1
Surges up to 156 V for 2 s; see Electrical Input Data
2
Efficiency at Vi nom and Io nom
.
Table 2: PSL Series
Output
voltage
Output
current
Io nom [A]
Operating input
voltage range
Vi [V]
Nom. input
voltage
Efficiency2
min [%] typ [%]
Type
Options
designation
Vo nom [V]
Vi nom [V]
η
η
5.1
5.1
5.1
12
12
12
15
15
15
24
24
24
10
11
12
6
8
9
6
8
9
6
8
9
8 – 80
8 – 40
7 – 40
40
20
20
60
40
30
60
40
30
60
40
40
77.5
79
PSL5A10-9R
PSL5A11-2R
PSL5A12-9R
PSL126-9R
PSL128-9R
PSL129-2R
PSL156-9R
PSL158-9R
PSL159-2R
PSL246-9R
PSL248-9R
PSL249-2R
-7, L, i, P, C, D, D1, K, G
78
79
-
83.5
85.5
-7, L, i, P, C, D, D1, K, G
18 – 144 1
15 – 80
88
89
89
89
90
91
93
93
94
89
90
90
-7, L, i, P, C, D, D1, K, G
-7, L, i, P, C, D, D1, K, G
-
15 – 40
22 – 144 1
19 – 80
91
-7, L, i, P, C, D, D1, K, G
92.5
-7, L, i, P, C, D, D1, K, G
19 – 40
93.5
-
31 – 144 1
29 – 80
94
95
96
-7, L, i, P, C, D, D1, K, G
-7, L, i, P, C, D, D1, K, G
29 – 60
-
36
6
44 – 144 1
42 – 80
80
95
96
PSL366-9R
-7, L, i, P, C, D, D1, K, G
-7, L, i, P, C, D, D1, K, G
-7, L, i, P, D, D1, K, G
36
8
60
95
96.5
PSL368-9R
48
6
58 –144 1
80
96
97
PSL486-9R
1
Surges up to 156 V for 2 s
2
Efficiency at Vi nom and Io nom
.
NFND: Not for new designs.
Preferred for new designs
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 2 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Part Number Description
PSC 12 6 -7 L i R P C D G
PSC Series
Positive switching regulator in case C03 .................... PSC
Nominal output voltage in volt.............................. 3.3 to 48
Nominal output current in ampere .......................... 6 to 12
Operational ambient temperature range TA
–10 to 50 °C ........................................................ -2
–25 to 71 °C ........................................................ -7
–40 to 71 °C (option) ........................................... -9
Input filter (option) ............................................................ L
Inhibit input ....................................................................... i
Control input for output voltage adjustment 1 .................. R
Potentiometer 1 (option) ................................................... P
Thyristor crowbar (option) ............................................... C
Input/output voltage monitor (option) ........................ D, D1
RoHS-compliant for all 6 substances ............................. G
1
Feature R excludes option P and vice versa.
Example: PSC126-7LiPC designates a positive switching regulator with a 12 V, 6 A output, ambient temperature range of
–25 to 71 °C, input filter, inhibit input, output adjust potentiometer, and thyristor crowbar.
PSL Series
PSL 12 6 -7 L i R P C D K G
Positive switching regulator in case L04..................... PSL
Nominal output voltage in volt.............................. 5.1 to 48
Nominal output current in ampere .......................... 6 to 12
Operational ambient temperature range TA
–10 to 50 °C ........................................................ -2
–25 to 71 °C ........................................................ -7
–40 to 71 °C (option) ........................................... -9
Input filter (option) ............................................................ L
Inhibit input ....................................................................... i
Control input for output voltage adjustment 1 .................. R
Potentiometer 1 (option) ................................................... P
Thyristor crowbar (option) ............................................... C
Input/output voltage monitor (option) ........................ D, D1
Coding strip (option) ........................................................ K
RoHS-compliant for all 6 substances ............................. G
1
Feature R excludes options i and P and vice versa.
Example: PSL126-9LiPC designates a positive switching regulator with a 12 V, 6 A output, ambient temperature range of
–40 to 71 °C, input filter, inhibit input, output adjust potentiometer, and thyristor crowbar.
NFND: Not for new designs.
Preferred for new designs
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 3 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
PSC 12 Z 3 A -9iRG
Customer-Specific Models
Positive switching regulator in case C03 .................... PSC
Positive switching regulator in case L04..................... PSL
Nominal output voltage in Volt (without decimals) ......... 12
Decimal places:
0.0 V ..................................................................... Z
0.1 V ..................................................................... A
0.15 V ................................................................... B
0.2 V .................................................................... C
0.25 V .................................................................. D
0.3 V ..................................................................... E
0.4 V ..................................................................... F
0.5 V .................................................................... G
0.6 V .................................................................... H
0.7 V ..................................................................... J
0.8 V ..................................................................... K
0.9 V ..................................................................... L
other ..................................................................... Y
Output current in Ampère ................................................ 3
Identification character............................................ A, B, ..
Temperature range and options ..............................-9iRG
Produkt Marking
Type designation, applicable safety approval marks, warnings,
pin allocation, Power-One patent nos., and company logo.
Identification of LED and optional potentiometers. Label with
input voltage range, nominal output voltage and current,
protection degree, batch no., serial no., and data code
including production site, version (modification status), and
date of production.
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 4 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Functional Description
complished by varying the duty cycle (on to off ratio) of the
power switch.The regulator is equipped with a undervoltage
lockout, but no overvoltage shutdown.
These regulators are ideal for a wide range of applications,
where input to output isolation is not necessary, or where
already provided by an external front end (e.g., a transformer
with rectifier). To optimize customer’s needs, additional options
and accessories are available.
The switching regulators are designed using the buck
converter topology. The input is not electrically isolated from
the output. During the on period of the switching transistor,
current is transferred to the output, and energy is stored in the
output choke. During the off period, this energy forces the
current to continue flowing through the output, to the load, and
back through the freewheeling diode. Regulation is ac-
03018a
Io
I i
Vi+
Vo+
Fuse
(option C)
D
i
Control circuit
Vi
Vo
Option C
R
G
Gi–
Vt
V
o
Go–
Option D
Option P
Fig. 1
Block diagram PSC
03021a
Io
14
17
5
Vo+
I i
29
Vi+
Fuse
(Option
C)
26
D
Control circuit
Vi
Vo
Option
C
R (or i)
Go–
20
23
2
8
Gi–
Vt
Option D
Vo
11
32
Option P
Fig. 2
Block diagram PSL
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 5 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Electrical Input Data
General Conditions: TA = 25 °C, unless TC is specified
Table 3a: Input data
Input
PSC3E12-2
PSC5A11-2
PSC129-2
Unit
PSL5A11-2R
PSL129-2R
Characteristics
Conditions
min
typ max min
40
typ max
min
typ
max
Vi
Operating input voltage
Io = 0 – Io nom
TC min – TC max
7
8
40
15
40
3
V
∆Vio min Min. diff. voltage Vi – Vo
2.7
2.9
Vi UVL
Ii 0
Undervoltage lockout
No load input current
4.7
7.3
50
150
75
5
7.3
Io = 0, Vi min – Vi max
50
50
mA
A
Iinr p
Peak value of inrush current
Vi nom
PSC
PSL
150
150
75
5
tinr r
Rise time of inrush current
EN 55011,0.15 – 30 MHz
5
µs
Vi RFI
Vi nom, Io nom,
A
A
A
Class
Table 3b: Input data
Input
PSC159-2
PSC249-2
Unit
PSL159-2R
PSL249-2R
Characteristics
Conditions
min
typ
max min
typ max
Vi
Operating input voltage
Io = 0 – Io nom
TC min – TC max
19
40
4
29
60
V
∆Vio min Min. diff. voltage Vi – Vo
5
Vi UVL
Ii 0
Iinr p
tinr r
Undervoltage lockout
7.3
12
50
250
5
No load input current
Io = 0, Vi min – Vi max
50
mA
A
Peak value of inrush current
Rise time of inrush current
EN 55011,0.15 – 30 MHz
Vi nom
250
5
µs
Vi RFI
Vi nom, Io nom
A
A
Class
Table 3c: Input data
Input
PSC5A12
PSL5A12
PSC5A10
PSL5A10
PSC128
PSL128
Unit
Characteristics
Conditions
min
typ
max min
typ max
min
typ
max
80
Vi
Operating input voltage
Io = 0 – Io nom
TC min – TC max
7
40
8
80
15
V
∆Viomin Min. diff. voltage Vi – Vo
1.9
2.9
3
Vi UVL
Ii 0
Undervoltage lockout
No load input current
6.3
7.3
40
7.3
Io = 0, Vi min – Vi max
45
35
mA
A
Iinr p
Peak value of inrush current
Vi nom
without L
150
250
5
250
350
5
250
350
5
with opt. L
without L
with opt. L
tinr r
Rise time of inrush current
EN 55011, 0.15 – 30 MHz
µs
25
B 1
25
B 1
25
B 1
Vi RFI
Vi nom, Io nom
Class
1
With option L and an additional external input cap Ci = 120 µF/100 V, e.g., Nichicon or similar
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 6 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Table 3d: Input data. General Conditions as per table 3a
Input
PSC158
PSL158
PSC248
PSL248
PSC368
PSL368
Unit
Characteristics
Conditions
min
typ
max min
typ max
min
typ
max
80
Vi
Operating input voltage
Io = 0 – Io nom
TC min – TC max
19
80
4
29
80
5
42
V
∆Vio min Min. diff. voltage Vi – Vo
6
Vi UVL
Ii 0
Undervoltage lockout
No load input current
7.3
12
19
Io = 0, Vi min – Vi max
35
35
40
mA
A
Iinr p
Peak value of inrush current
Vi nom
without L
250
350
5
250
350
5
250
350
5
with opt. L
without L
with opt. L
tinr r
Rise time of inrush current
µs
25
25
25
Vi RFI
EN 55011,0.15 – 30 MHz
Vi nom, Io nom
B 1
B 1
B 1
Class
1
With option L and an additional external input cap Ci = 120 µF/100 V, e.g., Nichicon or similar
Table 3e: Input data
Input
PSC126
PSL126
PSC156
PSL156
PSA246
PSC246
Unit
Characteristics
Conditions
min
typ
max min
144 2 22
6
typ max
min
typ
max
144 2
7
Vi
Operating input voltage
Io = 0 – Io nom
TC min – TC max
18
144 2
31
V
∆Vio min Min. diff. voltage Vi – Vo
7
Vi UVL
Ii 0
Undervoltage lockout
No load input current
12
15
35
19
Io = 0, Vi min – Vi max
35
35
mA
A
Iinr p
Peak value of inrush current
Vi nom
without L
250
350
5
250
350
5
250
350
5
with opt. L
without L
with opt. L
tinr r
Rise time of inrush current
EN 55011,0.15 – 30 MHz
µs
25
B 1
25
B 1
25
B 1
Vi RFI
Vi nom, Io nom
Class
1
With option L and an additional external input cap Ci = 120 µF/100 V, e.g., Nichicon or similar
2
Surges up to 156 V for 2 s
Table 3f: Input data
Input
PSC366
PSL366
PSC486
PSL486
Unit
Characteristics
Conditions
min
typ
max min
144 2 58
8
typ max
Vi
Operating input voltage 1
Io = 0 – Io nom
TC min – TC max
44
144 2
V
∆Vio min Min. diff. voltage Vi – Vo
10
Vi UVL
Ii 0
Undervoltage lockout
No load input current
29
40
Io = 0, Vi min – Vi max
40
45
mA
A
Iinr p
Peak value of inrush current
Vi nom
without L
250
350
5
250
350
5
with opt. L
without L
with opt. L
tinr r
Rise time of inrush current
EN 55011,0.15 – 30 MHz
µs
25
B 1
25
B 1
Vi RFI
Vi nom, Io nom
Class
1
With option L and an additional external input cap Ci = 120 µF/100 V, e.g., Nichicon or similar
2
Surges up to 156 V for 2 s
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 7 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
04016
External Input Circuitry
Vo+
Go–
Vi+
Gi–
+
The sum of the lengths of the supply lines to the source or to
the nearest capacitor ≥100 µF (a + b) should not exceed 5 m,
unless option L is fitted. This option is recommended in order
to prevent power line oscillations and reduce superimposed
interference voltages.
a
b
Fig. 3
Switching regulator with long supply lines.
Electrical Output Data
General conditions:
– TA = 25 °C, unless TC is specified
– R-input open (or Vo set to Vo nom with option P)
Table 4a: Output data
Output
PSC3E12
typ
PSC5A11/PSL5A11
PSC129/PSL129
Unit
Characteristics
Conditions
min
3.25
0
max min
typ
max
5.15
11.0
14.3
55
min
11.6
0
typ
max
12.4
9.0
Vo
Io
Output voltage
Vi nom, Io nom
3.35 5.05
V
A
Output current
Vi min – Vi max
TC min – TC max
12.0
0
IoL
vo
Output current limitation
12.0
15.6 11.0
9.0
11.7
150
160
Output
voltage
noise
Switching freq.
Total
Vi nom, Io nom
IEC/EN 61204
BW = 20 MHz
55
60
mVpp
mV
60
∆Vo V
∆Vo l
vo d
Static line regulation
Static load regulation
Vi min – Vi max, Io nom
Vi nom, Io = 0 – Io nom
Vi nom
100
100
100
100
240
120
Dynamic
load
regulation
Voltage deviat.
Recovery time
150
50
130
50
360
60
I
o nom ↔ 1/
Io nom
3
td
µs
IEC/EN 61204
α
Vo
Temperature coefficient
∆Vo/∆TC (TC min – TC max
Vi min – Vi max
Io = 0 – Io nom
±0.02
±0.02
±0.02 %/K
)
Table 4b Output data. General conditions as per table 4a
Output
PSC159/PSL159
PSC249/PSL249
Unit
Characteristics
Conditions
min
14.5
0
typ
max min
15.5 23.3
typ
max
24.7
9.0
Vo
Io
Output voltage
Vi nom, Io nom
V
A
Output current
Vi min – Vi max
TC min – TC max
9.0
11.7
200
210
0
IoL
vo
Output current limitation
9.0
9.0
11.7
300
210
Output
voltage
noise
Switching freq.
Total
Vi nom, Io nom
IEC/EN 61204
BW = 20 MHz
mVpp
mV
∆Vo V
∆Vo l
vo d
Static line regulation
Static load regulation
Vi min – Vi max, Io nom
Vi nom, Io = 0 – Io nom
Vi nom
300
150
480
240
Dynamic
load
Voltage deviat.
Recovery time
450
60
700
80
I
o nom ↔ 1/
Io nom
3
td
µs
regulation
IEC/EN 61204
α
Vo
Temperature coefficient
∆Vo/∆TC (TC min – TC max
Vi min – Vi max
Io = 0 – Io nom
±0.02
±0.02
%/K
)
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 8 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Table 4c: Output data. General conditions as per table 4a
Output
PSC5A12/PSL5A12 PSC5A10/PSL5A10
PSC128/PSL128
Unit
Characteristics
Conditions
Vi nom, Io nom
Vi min – Vi max
min
5.07
0
typ
max min
typ
max
5.13
11.0
14.3
55
min
11.93
0
typ
max
12.07
9.0
Vo
Io
Output voltage
5.13 5.07
V
A
Output current
12.0
0
T
C min – TC max
IoL
vo
Output current limitation
12.0
15.6 11.0
9.0
11.7
150
Output
voltage
noise
Switching freq.
Total
Vi nom, Io nom
IEC/EN 61204
BW = 20 MHz
55
60
mVpp
mV
60
160
∆Vo V
∆Vo l
vo d
Static line regulation
Static load regulation
Vi min – Vi max, Io nom
Vi nom, Io = 0 – Io nom
Vi nom
100
100
100
100
240
120
Dynamic
load
Voltage deviat.
Recovery time
150
50
130
50
360
60
I
o nom ↔ 1/
Io nom
3
td
µs
regulation
IEC/EN 61204
α
Vo
Temperature coefficient
∆Vo/∆TC (TC min – TC max
Vi min – Vi max
Io = 0 – Io nom
±0.02
±0.02
±0.02 %/K
)
Table 4d: Output data. General conditions as per table 4a
Output
PSC158/PSL158
PSC248/PSL248
PSC368/PSL368
Unit
Characteristics
Conditions
Vi nom, Io nom
Vi min – Vi max
min
typ
max min
15.09 23.68
typ
max
min
typ
max
36.22
8.0
Vo
Io
Output voltage
14.91
0
24.14 35.78
V
A
Output current
8.0
10.4
90
0
8.0
10.4
150
155
0
T
C min – TC max
IoL
vo
Output current limitation
8.0
8.0
8.0
10.4
190
Output
voltage
noise
Switching freq.
Total
Vi nom, Io nom
IEC/EN 61204
BW = 20 MHz
50
54
55
60
80
85
mVpp
mV
94
195
∆Vo V
∆Vo l
vo d
Static line regulation
Static load regulation
Vi min – Vi max, Io nom
Vi nom, Io = 0 – Io nom
Vi nom
70
30
100
45
150
120
150
80
220
160
200
125
220
100
270
160
Dynamic
load
Voltage deviat.
Recovery time
130
60
I
o nom ↔ 1/
Io nom
3
td
µs
regulation
IEC/EN 61204
α
Vo
Temperature coefficient
∆Vo/∆TC (TC min – TC max
Vi min – Vi max
Io = 0 – Io nom
±0.02
±0.02
±0.02 %/K
)
Table 4e: Output data. General conditions as per table 4a
Output
PSC126/PSL126
PSC156/PSL156
PSC246/PSL246
Unit
Characteristics
Conditions
Vi nom, Io nom
Vi min – Vi max
min
typ
max min
12.07 14.91
typ
max
min
typ
max
24.14
6.0
Vo
Io
Output voltage
11.93
0
15.09 23.86
V
A
Output current
6.0
7.8
45
0
6.0
7.8
70
0
T
C min – TC max
IoL
vo
Output current limitation
6.0
6.0
6.0
7.8
Output
voltage
noise
Switching freq.
Total
Vi nom, Io nom
IEC/EN 61204
BW = 20 MHz
30
34
50
54
50
54
70
mVpp
mV
49
74
75
∆Vo V
∆Vo l
vo d
Static line regulation
Static load regulation
Vi min – Vi max, Io nom
Vi nom, Io = 0 – Io nom
Vi nom
25
60
40
25
60
40
80
80
100
Dynamic
load
Voltage deviat.
Recovery time
150
50
130
50
360
60
I
o nom ↔ 1/
Io nom
3
td
µs
regulation
IEC/EN 61204
α
Vo
Temperature coefficient
∆Vo/∆TC (TC min – TC max
Vi min – Vi max
Io = 0 – Io nom
±0.02
±0.02
±0.02 %/K
)
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 9 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Table 4f: Output data. General conditions as per table 4a
Output
PSC366/PSL366
PSC486/PSL486
Unit
Characteristics
Conditions
min
typ
max min
36.22 47.71
typ
max
48.29
6.0
Vo
Io
Output voltage
Vi nom, Io nom
35.78
0
V
A
Output current
Vi min – Vi max
TC min – TC max
6.0
7.8
90
0
IoL
vo
Output current limitation
6.0
6.0
7.8
Output
voltage
noise
Switching freq.
Total
Vi nom, Io nom
IEC/EN 61204
BW = 20 MHz
50
54
55
95
110
mVpp
mV
94
115
∆Vo V
∆Vo l
vo d
Static line regulation
Static load regulation
Vi min – Vi max, Io nom
Vi nom, Io = 0 – Io nom
Vi nom
200
120
140
100
300
200
100
180
150
100
200
250
Dynamic
load
Voltage deviat.
Recovery time
I
o nom ↔ 1/
Io nom
3
td
µs
regulation
IEC/EN 61204
α
Vo
Temperature coefficient
∆Vo/∆TC (TC min – TC max
Vi min – Vi max
Io = 0 – Io nom
±0.02
±0.02 %/K
)
Vo
Io/Io nom
vod
Vo 1%
Vo 1%
05031a
1.0
0.9
vod
forced
cooling
td
td
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
convection cooling
t
TC max
Io/Io nom
1
0.5
≥ 10 µs
≥ 10 µs
0
t
05102c
Fig. 4
TA
TA min
50
60
70
80
90
°C
Switching regulator with long supply lines.
Fig. 5b
Output current derating versus temperature (models -7 or -9)
Thermal Considerations
When a switching regulator is located in free, quasi-stationary
operated at Io nom, the case temperature TC will be about 95 °C
after the warm-up phase, measured at the measuring point of
case temperature TC; see Mechanical Data.
air (convection cooling) at a temperature TA = 71 °C and is
Io/Io nom
Under practical operating conditions, the ambient temperature
TA may exceed 71 °C, provided that additional measures (heat
sink, fan, etc.) are taken to ensure that the case temperature TC
does not exceed its maximum value of 95 °C.
Example: Sufficient forced cooling allows TA max = 85 °C. A
simple check of the case temperature TC (TC ≤ 95 °C) at full
load ensures correct operation of the system.
05032a
1.0
0.9
Forced
cooling
0.8
0.7
Convection cooling
0.6
TC max
0.5
0.4
0.3
0.2
0.1
0
TA
TA min
40
60
70
80 [°C]
50
Fig. 5a
Output current derating versus temperature (models -2)
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 10 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
protection is not designed to withstand externally applied
overvoltages.
A constant current limitation circuit holds the output current
almost constant, when an overload or a short circuit is applied
to the output. It acts self-protecting and recovers automatically
after removal of the overload or short circuit condition.
Output Protection and Short Circuit Behaviour
A voltage suppressor diode, which in worst case conditions
fails into a short circuit (or a thyristor crowbar, option C),
protects the output against an internally generated over-
voltage. Such an overvoltage could occur due to a failure of
either the control circuit or the switching transistor. The output
Parallel and Series Connection
Vo/Vo nom
05033a
Outputs of equal nominal voltages can be parallel-connected.
However, the use of a single regulator with higher output power,
is always the better solution.
In parallel-connected operation, one or several outputs may
operate continuously at their current limit knee-point which will
cause an increase of the heat generation. Consequently, the
max. ambient temperature should be reduced by 10 °C.
1.0
Io nom
0.8
Io L
0.6
0.4
0.2
Outputs can be series-connected with any other regulator. In
series-connection the maximum output current is limited by the
lowest current limitation, but electrically separated source
voltages are needed for each regulator.
0
0.2
0.4
0.6
0.8
1.0
1.2 Io/Io nom
Fig. 6
Overload, short-circuit behaviour Vo versus Io.
Iinh [mA]
Auxiliary Functions
06034a
5
i Inhibit (Remote On / Off)
4
3
2
The inhibit input allows the switching regulator output to be
disabled via a control signal. In systems with several
converters, this feature can be used, for example, to control
the activation sequence of the converters by a logic signal
(TTL, C-MOS, etc.). An output voltage overshoot will not occur,
when switching on or off.
Output off
Output on
1
0
Vinh
Note: With open i-input, the output is enabled.
–20
0
–40
20
40
V
Fig. 7
Typical inhibit current Iinh versus inhibit voltage Vinh
Table 5: Inhibit characteristics
06009a
Characteristics
Conditions
min typ max Unit
Vo+
i
Vi+
Vinh Inhibit input voltage Vo = on Vi min – Vi max
–50
+0.8
+50
V
Iinh
TC min –TC max
Vo = off
+2.4
t r Switch-on time
t f Switch-off time
Vi = Vi nom
130
25
ms
mA
Vinh
RL =Vo nom/Ionom
Go–
Gi–
Ii inh Input current when inhibited Vi = Vi nom
25
Fig. 8
Definition of Iinh and Vinh
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 11 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Vo/Vo nom
1
06001
LED Output Voltage Indicator
0.1
0
An LED indicator (yellow for PSC, green for PSL) is illuminated,
t
when the output voltage is higher than approx. 3 V.
tf
tr
Inhibit
1
t
0
Fig. 9
Output response as a function of inhibit signal
R Output Voltage Adjust
Note: With open R input, Vo ≈ Vo nom
.
The output voltage Vo can either be adjusted with an external
voltage source (Vext ) or with an external resistor (Rext1 or Rext2).
The adjustment range is 0 – 108% of Vo nom. The minimum
differential voltage ∆Vio min between input and output (see
Electrical Input Data) should be maintained.
a) Vo = 0 – Vo max, using Vext between R and G (Go– for PSL):
Vo
Vext
–––––
–––––
Vext ≈ 2.5 V •
Vo ≈ Vo nom •
Vo nom
2.5 V
Caution: To prevent damage, Vext should not exceed 20 V, nor
be negative.
b) Vo = 0 to Vo nom, using Rext1 between R and G (Go– for
PSL):
4000 Ω • Vo
Vo nom • Rext1
–-–––––––––––
Rext1 + 4000 Ω
–––––––––––
Rext1
≈
Vo ≈
Vo nom – Vo
c) Vo = Vo nom to Vo max, using Rext2 between R and G (Go–
for PSL):
4000 Ω • Vo • (Vo nom – 2.5 V)
––––––––––––––––––––––––––––––
Rext2
≈
2.5 V • (Vo – Vo nom)
Vo nom • 2.5 V • Rext2
––––––––––––––––––––––––––––––––––––––––
Vo ≈
2.5 V • (Rext2 + 4000 Ω) – Vo nom • 4000 Ω
Caution: To prevent damage, Rext2 should never be less than
47 kΩ.
JM073
Vi+
Vo+
R
Rext2
4 kΩ
Vref = 2.5 V
+
+
–
Control
logic
Vext
Rext1
G
Gi–
Go–
Fig. 10
Voltage adjustment via R-input
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 12 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Electromagnetic Compatibility (EMC)
Electromagnetic Immunity
General condition: Case not earthed.
Table 6: Immunity type tests
Phenomenon
Standard
Class
Level
Coupling
mode 1
Value
Waveform
Source
Imped.
Test
In
Perf.
applied
procedure
oper. crit. 2
3
Voltage surge 3
IEC 60571-1
i/c, +i/–i
800 Vp
1500 Vp
3000 Vp
4000 Vp
7000 Vp
100 µs
50 µs
5 µs
100 Ω
1 pos. and 1 neg.
surge per
yes
B
coupling mode
1 µs
100 ns
1/50 ns
3
Electrostatic
discharge
IEC/EN
61000-4-2
43
24
contact discharge 8000 Vp4
330 Ω
50 Ω
10 positive and
10 negative
discharges
yes
yes
A 5
A
to case
4000 Vp
Electromagnetic IEC/EN
field
33
24
antenna
10 V/m3
3 V/m4
AM 80%
1 kHz
80 – 1000 MHz
61000-4-3
Electrical fast
transients/burst
IEC/EN
61000-4-4
3
i/c, +i/–i
2000 Vp bursts of 5/50 ns
5 kHz rep. rate
60 s positive
60 s negative
transients per
coupling mode
yes A 5, B4
transients with
15 ms burst
duration and a
300 ms period
Surges
IEC/EN
23
23
i/c
1000 Vp
500 Vp
1.2/50 µs
12 Ω
2 Ω
5 pos. and 5 neg.
surges per
yes
yes
B 5
A
61000-4-5
+i/–i
coupling mode
Conducted
disturbances
IEC/EN
61000-4-6
33
24
i, o, signal wires
10 VAC3
3 VAC4
AM 80%
1 kHz
150 Ω
0.15 – 80 MHz
1
i = input, o = output, c = case.
2
3
4
5
A = Normal operation, no deviation from specifications, B = Normal operation, temporary loss of function or deviation from specs possible
Not applicable for -2 models
Valid for -2 models
Option L neccessary; with option C, manual reset might be necessary.
Electromagnetic Emission
For emission levels refer to Electrical Input Data.
[dBµV]
07017
90
80
EN 55022 A
EN 55022 B
70
60
50
40
30
20
10
0
Fig. 11
Typical disturbance voltage (quasi-peak) at
the input according to EN 55011, measured at
Vi nom and Io nom.
MHz
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 13 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Immunity to Environmental Conditions
Table 7: Mechanical and climatic stress
Test Method
Standard
Test Conditions
Status
Cab
Damp heat
steady state
IEC/EN 60068-2-78
MIL-STD-810D section 507.2
Temperature:
Relative humidity:
Duration:
40 ±2 °C
Regulator
not
operating
93 +2/-3
%
56 days
Ea
Shock
(half-sinusoidal)
IEC/EN 60068-2-27
MIL-STD-810D section 516.3
Acceleration amplitude:
Bump duration:
Number of bumps:
50 gn = 490 m/s2
Regulator
operating
11 ms
18 (3 each direction)
Eb
Fc
Bump
IEC/EN 60068-2-29
Acceleration amplitude:
Bump duration:
25 gn = 245 m/s2
Regulator
operating
(half-sinusoidal)
MIL-STD-810D section 516.3
11 ms
Number of bumps:
6000 (1000 each direction)
Vibration
(sinusoidal)
IEC/EN 60068-2-6
MIL-STD-810D section 514.3
Acceleration amplitude:
0.35 mm (10 – 60 Hz)
5 gn = 49 m/s2 (60 – 2000 Hz)
10 – 2000 Hz
Regulator
operating
Frequency (1 Oct/min):
Test duration:
7.5 h (2.5 h each axis)
Fda
Kb
Random vibration
wide band
IEC/EN 60068-2-35
DIN 40046 part 23
Acceleration spectraldensity: 0.05 g2/Hz
Regulator
operating
Frequency band:
Acceleration magnitude:
Test duration:
20 – 500 Hz
4.9 gn rms
Reproducibility
high
3 h (1 h each axis)
Salt mist, cyclic
(sodium chloride
NaCl solution)
IEC/EN 60068-2-52
Concentration:
Duration:
5% (30 °C)
Regulator
not
operating
2 h per cycle
40 °C, 93% rel. humidity
22 h per cycle
3
Storage:
Storage duration:
Number of cycles:
Temperatures
Table 8: Temperature specifications, valid for an air pressure of 800 - 1200 hPa (800 - 1200 mbar)
Temperature
Characteristics
-2
-7
-9 (Option)
min max
Conditions
min
–10
–10
–25
max
50
80
min
–25
–25
–40
max
71
95
Unit
°C
TA
TC
TS
Ambient temperature 1
Case temperature
Storage temperature 1
Regulator
–40
–40
–55
71
95
100
operating
Non operational
100
100
1
See Thermal Considerations and Overtemperature Protection.
Reliability
Table 9: Typical MTBF and device hours
MTBF
Ground Benign
TC = 40 °C
Ground Fixed
Ground Mobile
TC = 50 °C
68 000 h
Device Hours 1
MTBF acc. to MIL-HDBK-217F
TC = 40 °C
TC = 70 °C
660 000 h
143 000 h
81 000 h
2 800 000 h
1
Statistical values, based on an average of 4300 working hours per year and in general field use
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 14 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Mechanical Data
PSC models
Yellow LED output
voltage indicator
Potentiometer
(option D)
Potentiometer
(option P)
09023a
European
Projection
Vt
Vo
Dimensions in mm.
Gi–
D
G
Go– Vo+
Vi+
Vo
R
i
1
151
Distance between M4 mounting screws
144
0.5
5
Measuring point
of case temperature TC
Fig. 12
Case C03, weight 440 g
Aluminium, black finish and
self cooling
11.3
18.5
1
12.5
40
7.5 (14)
10 7.5 10
7.5
27.5 7.5
PSL models
The regulators are designed to be inserted into a DIN-rack
according to IEC 60297-3. Dimensions in mm.
168.5
M2.5
2 TE
17.4 10.9
159.4
127
0.5
4.9
6 TE
20
Green LED
09027a
Potentio-
meter (opt. P)
2
min. 5
ø5.2
ø3
Threads M3; 4 mm deep
(for mounting screws)
0.9
32
1.5
0.5
173.7
11
6.4
(19.1)
20.32
Mounting plane of
connector H11
4 TE
Measuring point of
case temperature TC
Potentiometer (option D)
Fig. 13
Case L04, weight 550 g
Aluminium, fully enclosed, black finish EP
powder-coated, and self cooling
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 15 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Safety and Installation Instructions
Standards and Approvals
All switching regulators are class-I equipment and have been
approved according to UL 60950, CSA 60950, and IEC/EN
60950-1 2nd Ed.
The regulators have been evaluated for:
• Building in
Pin Allocation
The pins of PSC models are printed onto the case of the
regulator.
The pin allocation of PSL models is shown in the table below:
• The use in a pollution degree 2 environment
• Connecting the input to a secondary circuit, which is subject
to a maximum transient rating of 1500 V.
The switching regulators are subject to manufacturing
surveillance in accordance with the above mentioned
standards and with ISO 9001:2000.
Table 10: H11 connector pin allocation (PSL models)
Electrical Determination
Type H11
Pin No.
Design.
R-input (or inhibit input) 1
Undervoltage monitor (Option D)
2
5
R (i)
D
Output voltage (negative)
Output voltage (negative)
Output voltage(positive)
Output voltage (positive)
8
Go–
Go–
Vo+
Vo+
Isolation
11
14
17
The resistance of the protective earth connection (max. 0.1 Ω) is
tested only for PSL models.
PSC models: Electric strength test voltage between input
connected with output against case: 2200 VDC, ≥1 s (for some
PSC models only with version V103 or higher).
PSL models: The electric strength between the input, intercon-
nected with the output, and the case is tested with 500 VDC (all
-2 models), 750 VDC (models with Vi max = 80 V), or 1500 VDC
(models with Vi max = 144) during ≥1 s.
These tests are performed in the factory as routine test in
accordance with EN 50116 and IEC/EN 60950. The electric
strength test should not be repeated by the customer.
Input voltage (negative)
Input voltage (negative)
Input voltage (positive)
Input voltage (positive)
Protective ground (leading pin)
20
23
26
29
32
Gi–
Gi–
Vi+
Vi+
1
R-input is used for the inhibit function. Consequently, option R
and i exclude each other.
Installation Instruction
Railway Application
The regulators have been developed observing the railway
standards EN 50155 and EN 50121. All boards are coated with
a protective lacquer.
Installation must strictly follow the national safety regulations in
compliance with the enclosure, mounting, creepage,
clearance, casualty, markings, and segregation requirements
of the end-use application.
Check for hazardous voltages before connecting. Connections
of PSC models can be made using fast-on or soldering
technique. PSL models should be plugged into a DIN-rack
The input and the output circuit are not separated, i.e., the
negative path is internally interconnected.
The regulators should be connected to a secondary circuit.
Do not open the regulator !
Ensure that a unit failure (e.g., by an internal short-circuit) does
not result in a hazardous condition.
Cleaning Liquids
In order to avoid possible damage, any penetration of cleaning
fluids must be prevented, since the power supplies are not
hermetically sealed.
Protection Degree
The protection degree is IP 30 (IP 20, if equipped with option P,
D, or D1). It applies only, if the regulator is plugged-in or the
matching female connector is properly attached.
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 16 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
D or D1 Input/Output Undervoltage Monitor
Description of Options
Note: Output instead of input undervoltage monitor is
-9 Extended Temperature Range
available on request (Option D1).
This option defines an extended temperature range as
Terminal D and Go– are connected to a normally conducting
field effect transistor (JFET). A 0.5 W Zener diode protects
against overvoltages.
specified in table 8.
P
Potentiometer
The switching characteristics of the option D output are shown
Note: Option P is not recommended, if several regulators are
in fig. Definition of Vt and VH.
operated in parallel connection.
11025
Option P excludes R function; the R-input (pin 16) should be
10 kΩ
left open-circuit. The output voltage Vo can be adjusted in the
ID
D
8.2 V
Go –
Vi +
range 90 – 110% of Vo nom
.
+5 V
However, the minimum differential voltage ∆Vi o min between
input and output specified in Electrical Input Data should be
observed.
JFET
Vt
VD
100 pF
L
Input Filter
Gi –
Option L is recommended to reduce superimposed inter-
ference voltages and to prevent oscillations, if input lines
exceed the length of approx. 5 m in total. The fundamental
wave (approx. 120 kHz) of the reduced interference voltage
between Vi+ and Gi– has, with an input line inductance of
5 µH, a maximum magnitude of 4 mVAC.
The input impedance of the switching regulator at 120 kHz is
about 3.5 Ω. The harmonics are small in comparison with the
fundamental wave.
Fig. 14
Test circuit with definition of voltage VD and current ID
VH
VD
VD high
11026
With option L, the maximum permissible additionally
superimposed ripple vi of the input voltage (rectifier mode) at a
specified input frequency fi has the following values:
VD low
vi max = 10 Vpp at 100 Hz or Vpp = 1000 Hz/fi • 1V
Vi
Vt
C
Thyristor Crowbar
Fig. 15
Definition of Vt and VH
Option C protects the load against power supply malfunction. It
is not designed to sink external currents. A fixed-value
monitoring circuit checks the output voltage Vo. When the
trigger voltage Vo c is reached, the thyristor crowbar triggers
and disables the output. It can be deactivated by removal of
the input voltage. In case of a defect switching transistor, the
internal fuse prevents excessive current.
Table 12: Data of option D
Characteristics
Conditions
PSC/PSL
Unit
min typ max
VD low Low impedance Vi < Vt, ID ≤ 2.5 mA
0.8
V
Type of the fuse:
VD high Highimpedance Vi > Vt + VH,
ID > 25 mA
4.75
• Regulators with Io nom = 6 A: 6.3 A / 250 V, slow, 5 × 20 mm
• Regulators with Io nom > 6 A: 16 A / 250 V, slow, 5 × 20 mm
tlow min Min. durat. VDlow
30
1
ms
ms
Note: The crowbar can be reset by removal of the input voltage
only. The inhibit signal cannot deactivate the thyristor.
t D f
ID
Response toVDlow
Current through D
20 mA
Table 11: Crowbar trigger levels
Characteristics
Conditions
Vo = 5.1 V
Vo = 12 V
Vo = 15 V
Vo = 24 V
Vo = 36 V
Unit
min typ max min typ max min typ max min typ max min typ max
Vo c Trigger voltage TC min – TC max 5.8
Vi min – Vi max
6.8 13.5
1.5
16 16.5
1.5
19
27
31
40
45
V
ts
Delay time
1.5
1.5
1.5
µs
Io = 0 – Io nom
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 17 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
The voltage Vt can be externally adjusted by a trim
potentiometer. The hysteresis VH of Vt is <2%. Pin D stays low
for a minimum time tlow min, in order to prevent any oscillation.
Vt can be set to a value between Vi min and Vi max. Note that the
JFET becomes conductive, when VD exceeds approx. 7 V.
K
Connector Coding Strip
For PSL models only.
G
RoHS Compliance
Models with G are RoHS-compliant for all six substances.
Accessories
A variety of electrical and mechanical accessories are
available including:
JM174
• Battery sensor [S-KSMH...] for using the regulator as battery
charger. Different cell characteristics can be selected; see
fig. 16 and the Temperature Sensors Data Sheet
BCD20024 on our web site.
European
Projection
30
09125
∅ 4.2
35.5
l
65
adhesive tape
l: 2 m standard length
other cable lengths on request
71
Fig. 17
Fig . 16
Battery temperature sensors
Isolation pad HZZ01206-G
(ISOLATIONC,C03)
0.3 mm thick
Accessories suitable for PSC models
1
• PCB isolation pads for easy and safe PCB-mounting; see
fig. 17.
• Solder-tags for direct mounting of the regulator to a PCB
board; see fig. 18.
Fig. 18
1
• Ring core chockes for ripple and interference reduction; see
Solder tag HZZ01204-G
fig. 19.
(LOETGABEL(10x))
Delivery content: 10 pieces
5.08
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 18 of 19
PSC, PSL Series Data Sheet
Positive Switching Regulators
Fig. 20
Different mating connectors,
including code key system
Fig. 19
Different filters
Accessories suitable for PSL models:
• Various mating connectors H11, including screw, solder,
fast-on, or press-fit terminals; see fig. 20 and the data sheet
Casette Style Mating Connectors BCD20022 on our web
site.
• Code key system for connector coding CODIERKEIL(5X)
• Various front panels for 19" racks with 3U heigth, Schroff or
Intermas
Fig. 21
Different front
panels
For additional accessory product information, see the
accessory data sheets listed with each product series or
individual model listing at www.belpowersolutions.com/
power.
NUCLEAR AND MEDICAL APPLICATIONS - These products are not designed or intended for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
www.belpowersolutions.com/power
MELCHER
The Power Partners.
BCD20027-G Rev AB, 3-Nov-2014
Page 19 of 19
相关型号:
©2020 ICPDF网 联系我们和版权申明