RNS01EG-M6-G [BEL]
DC-DC Regulated Power Supply Module, 1 Output, 10W, Hybrid, SMT-18;![RNS01EG-M6-G](http://pdffile.icpdf.com/pdf2/p00241/img/icpdf/RNS0-6ZH-M6-_1458352_icpdf.jpg)
型号: | RNS01EG-M6-G |
厂家: | ![]() |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 10W, Hybrid, SMT-18 |
文件: | 总24页 (文件大小:684K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Features
• RoHS lead-free and lead-solder-exempt
products are available
• Single- and double-output models
• Basic isolation
• 1500 VDC i/o electric strength test voltage
• Synchronization function
• Low profile – 8.5 mm height
• Excellent co-planarity
• Convection cooling
• Low conducted and radiated EMI
• Wide input range
• Output overcurrent protection
• Remote on/off (primary referenced)
Applications
• Output voltage trim adjust, positive or
negative
•
•
•
•
•
Distributed power architectures
• Operating temperature up to 110 °C
Telecommunications equipment
LAN/WAN applications
Industrial applications
Data processing
• Safety-approved to IEC 60950-1 2nd Ed.
and UL/CSA 60950 2nd Ed.
Description
The RN Series of converters are industry standard,
2” × 1” size, low profile, single- and double-output
DC-DC converters intended for SMT placement and
reflow soldering. The product provides onboard
conversion of a wide range of standard telecom,
datacom and industrial input voltages to isolated low
output voltages without the need for any additional
cooling. Proprietary patented manufacturing process
ensures optimal quality through full process
automation. The converters are cost effective high
performance alternatives to competing products on the
market.
BCD.00038 Rev. AA, 28-Mar-2012
Page 1 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
.
Model Selection
Single-output models
Input
voltage
VDC
Max input
current
A
Output
voltage
V
Output rated
current
A
Output
ripple/noise
mVpp
Typical
efficiency
%
Model1
RNS01EE-M6
RNS03ZE-M6
RNS01EG-M6
RNS02ZG-M6
RNS0.9ET-M6
RNS0.6ZH-M6
18 – 72
38 – 75
18 – 72
38 – 75
18 – 72
38 – 75
0.5
0.4
0.5
0.4
0.5
0.3
3.30
2.50 2 / 3.30
5.05
1.5
3.0
1.2
2.0
0.9
0.6
25
50
25
50
25
40
78
79
79
83
80
83
5.05
7.00
12.0 / 15.0 2
1
Add G to the end of the part number for products, which comply to RoHS for all 6 substances.
Output voltage adjusted using the trim function
2
Double-output models
Input
Max. input
current
A
Output
voltage
V
Output rated
current
A
Output
ripple/noise
mVpp
Typical
efficiency
%
Model1
voltage
VDC
+3.27
+5.20
1.0
1.0
RND02ZGE-M6
38 – 75
0.4
50
81
RND02ZGG-M6
RND0.8ZHH-M6
38 – 75
36 – 75
0.4
0.4
±5.10
±12.0 / ±15.0 2
± 1.0
± 0.42
50
50
81
85
1
Add G to the end of the part number for products, which comply to RoHS for all 6 substances.
Output voltage adjusted using the trim function
2
BCD.00038 Rev. AA, 28-Mar-2012
Page 2 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Absolut Maximum Ratings
Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect
long-term reliability and cause permanent damage to the converter.
All specifications apply over specified input voltage, output load and temperature range, unless otherwise
noted.
Parameter
Conditions/Description
Min
Max
Unit
Input voltage (Vin)
Continuous
RNS01EE/RNS01EG/RNS0.9ET
(18)
38
(72)
VDC
all other models
Transient, 100 ms
75
100
110
125
16
VDC
VDC
°C
Transient input voltage (Vint)
Operating CaseTemp. (Tc)
Storage Temperature (Ts)
ON/OFF Control Voltage (Vrc)
All operating conditions
-45
-55
-5
°C
V
Referenced to -Vin
Environmental and Mechanical Specifications
Parameter
Shock
Conditions/Description
Min
Nom
Max
Unit
g
IEC68-2-27
IEC68-2-6
100
10
Sinusoidal Vibration
Weight
g
0.6/17
oz/g
Water Washing
Standard process
Yes
Per Bellcore TR-NWT-000332
MTBF
4590
1000 h
(100% load at 25 °C,GB)
Isolation Specifications
Parameter
Conditions/Description
Min
Nom
Max
Unit
Insulation Safety Rating
Basic insulation
1500
--
Electriic strength test voltage
Insulation Resistance (Rps)
Insulation Capacitance (Cps)
VDC
10
MΩ
2200
pF
BCD.00038 Rev. AA, 28-Mar-2012
Page 3 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Input Data
Single-output models
Parameter
Conditions/Description
Min
Nom
Max
Unit
Continuous (4:1 input range)
Continuous standard input range
(18)
38
(48)
48
(72)
75
Input Voltage (Vin)
Input current when shut down
VDC
Vin.Nom, Remote Control activated
3
mA
mA
Vin.Nom, Io = 0 (4:1 range)
Vin.Nom, Io = 0 std input range
(30)
10
Input Current No Load
Turn-On Input Voltage 18-72 Vin
Turn-Off Input Voltage 18-72 Vin
Turn-On Input Voltage 38-75 Vin
Turn-Off Input Voltage 38-75 Vin
Turn-On Time
Ramping Up, Io.Max
Ramping Down, Io.Max
Ramping Up, Io.Max
Ramping Down, Io.Max
16.5
15.5
34
17.5
16
18
16.5
38
V
V
36
30
33
36
To Output Regulation Band
After Remote Control
Rise Time
250
25
5
400
ms
Input Reflected Ripple Current
Input Capacitance
Vin.Max, Io.Max
30
mAp-p
1.4
μF
Double-output models
Parameter
Conditions/Description
Min
36 (38)
Nom
Max
Unit
Input Voltage (Vin)
Input Current when Shutdown
Continuous
48
75
3
VDC
mA
Vin.Nom, Rem. Cont.
activated
Input Current No Load
Vin.Nom, Io = 0
10
31.5
30.5
36
mA
V
Turn-On Input Voltage (-ZGG)
Turn-Off Input Voltage (-ZGG)
Turn-On Input Voltage (-ZHH)
Turn-Off Input Voltage (-ZHH)
Turn-On Input Voltage (-ZGE)
Turn-Off Input Voltage (-ZGE)
Turn-On Time
Ramping Up, Io.Max
Ramping Down, Io.Max
Ramping Up, Io.Max
Ramping Down, Io.Max
Ramping Up, Io.Max
Ramping Down, Io.Max
27.5
26.5
32
29
28
34.5
33.5
36.5
34.5
V
V
30
35
34
38
30
36
To Output Regulation Band
After Remote Control
Rise Time
250
25
5
400
ms
Input Reflected Ripple Current
Input Capacitance
Vin.Max, Io.Max
30
mAp-p
1.4
μF
BCD.00038 Rev. AA, 28-Mar-2012
Page 4 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Output Data
RNS01EE : 3.3 V / 1.5 A
All specifications apply over input voltage, output load and temperature of 25 °C, unless otherwise noted.
Parameter
Conditions/Description
Min
Nom
Max
Unit
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Vo
Io
3.27
3.30
3.33
VDC
Vin.Nom, Io = 1.5 A, 25 °C
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
Vin.Nom, Io.Min to Io.Max
50-100% Io.Max load step
change.
0.15
1.5
70
ADC
mV
25
35
Load Regulation
Dynamic Regulation
Peak Deviation
Settling Time
Output Voltage Ripple
90
mV
300
300
50
± mV
μs
mVp-p
to 1% error band
Vr
Comax
Icl
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
25
Admissible Load
Capacitance
Output Current Limit
Threshold
2,200
150
μF
Vout ≤0.90 Vo.Nom
110
%Io.Max
Switching Frequency
Fs
Vin.Nom, Io.Max
410
kHz
Temperature
Coefficient
Trim Range
Tco
0.02
3.85
%Vo/°C
Vt
Io.Min to Io.Max, Vin.Min to
Vin.Max
2.75
Vo
* At Iout<Iout.Min, the output may contain low frequency component that exceeds ripple specifications.
Typical Characteristic Curves
Output Voltage Vs Load
Efficiency Vs Load
Vout (V)
4.00
Efficiency
90%
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
80%
70%
60%
50%
40%
30%
20%
10%
0%
Vin Min
Vin Nom
Vin Max
Vin Min
Vin Nom
Vin Max
Iout (A)
Iout (A)
BCD.00038 Rev. AA, 28-Mar-2012
Page 5 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RNS03ZE : 3.3 V / 3.0 A
All specifications apply over input voltage, output load and temperature range, unless otherwise noted.
Parameter
Conditions/Description
Min
Nom
Max
Unit
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Vo
Io
3.27
3.30
3.33
VDC
Vin.Nom, Io = 2.0 A, 25 °C
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
0.3
3.0
50
ADC
mV
Load Regulation
Dynamic Regulation
Peak Deviation
Settling Time
Output Voltage Ripple
Vin.Nom, Io.Min to Io.Max
25-75% Io.Max load step
change.
120
mV
300
300
70
± mV
μs
mVp-p
to 1% error band
Vr
Comax
Icl
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
50
Admissible Load
Capacitance
Output Current Limit
Threshold
Switching Frequency
Temperature
15,000
140
μF
Vout ≤0.90 Vo.Nom
110
2.3
%Io.Max
Fs
Tco
Vin.Nom, Io.Max
400
kHz
%Vo/°C
0.02
4.0
Coefficient
Trim Range
Vt
Io.Min to Io.Max, Vin.Min to
Vin.Max
Vo
•
At Iout<Iout.Min, the output may contain low frequency component that exceeds ripple specifications. The output voltage
may rise to a maximum of 4.0V.
Typical Characteristic Curves
Output Voltage Vs Load
Efficiency Vs Load
Vout (V)
Efficiency
90.00%
80.00%
70.00%
60.00%
50.00%
40.00%
30.00%
20.00%
10.00%
0.00%
4.50
4.00
3.50
3.00
2.50
2.00
1.50
1.00
0.50
0.00
Vin Min
Vin Nom
Vin Max
Vin Min
Vin Nom
Vin Max
Iout (A)
Iout (A)
BCD.00038 Rev. AA, 28-Mar-2012
Page 6 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RNS01EG : 5.05 V / 1.2 A
All specifications apply over input voltage, output load and temperature of 25 °C, unless otherwise noted.
Parameter
Conditions/Description
Min
Nom
Max
Unit
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Vo
Io
5.02
5.05
5.08
VDC
Vin.Nom, Io = 0.2 A, 25 °C
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
Vin.Nom, Io.Min to Io.Max
50-100% Io.Max load step
change.
0.15
1.2
100
ADC
mV
60
40
Load Regulation
Dynamic Regulation
Peak Deviation
Settling Time
Output Voltage Ripple
100
mV
250
300
50
± mV
μs
mVp-p
to 1% error band
Vr
Comax
Icl
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
25
Admissible Load
Capacitance
Output Current Limit
Threshold
Switching Frequency
Temperature
2,200
150
μF
Vout ≤0.90 Vo.Nom
110
4.3
%Io.Max
Fs
Tco
Vin.Nom, Io.Max
410
kHz
%Vo/°C
0.02
5.9
Coefficient
Trim Range
Vt
Io.Min to Io.Max, Vin.Min to
Vin.Max
Vo
* At Iout<Iout.Min, the output may contain low frequency component that exceeds ripple specifications.
RNS01EG Typical Characteristic Curves
Vout (V)
6.00
Output Voltage Vs Load
Efficiency
Efficiency Vs Load
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
5.00
4.00
3.00
2.00
1.00
0.00
Vin Min
Vin Nom
Vin Max
Vin Min
Vin Nom
Vin Max
Iout (A)
Iout (A)
BCD.00038 Rev. AA, 28-Mar-2012
Page 7 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RNS02ZG : 5.05 V / 2.0 A
All specifications apply over input voltage, output load and temperature range, unless otherwise noted.
Parameter
Conditions/Description
Min
Nom
Max
Unit
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Vo
Io
5.02
5.05
5.08
VDC
Vin.nom, Io = 1.5 A, 25 °C
Vin.min to Vin.max
Vin.min to Vin.max, 50%
Io.Max
0.2
2.0
100
ADC
mV
Load Regulation
Dynamic Regulation
Peak Deviation
Settling Time
Output Voltage Ripple
Vin.nom, Io.min to Io.max
25-75% Io.Max load step
change.
180
mV
250
300
70
± mV
μs
mVp-p
to 1% error band
Vr
Comax
Icl
Vin.min to Vin.max, Io.min to
Io max, 20 MHz Bandwidth
Io.max, Vin.nom
50
Admissible Load
Capacitance
Output Current Limit
Threshold
Switching Frequency
Temperature
10,000
140
μF
Vout ≤0.90 Vo.nom
110
4.0
%Io.Max
Fs
Tco
Vin.nom, Io.max
400
kHz
%Vo/°C
0.02
6.0
Coefficient
Trim Range
Vt
Io.mmin to Io.Max, Vin.min to
Vin.max
Vo
* At Iout < Iout.min, the output may contain low frequency component that exceeds ripple specifications. The output voltage
may rise to a maximum of 6.0 V
Typical Characteristic Curves
Output Voltage Vs Load
Efficiency Vs Load
Vout (V)
Efficiency
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.00
90.00%
80.00%
70.00%
60.00%
50.00%
40.00%
30.00%
20.00%
10.00%
0.00%
Vin Min
Vin Nom
Vin Max
Vin Min
Vin Nom
Vin Max
Iout (A)
Iout (A)
BCD.00038 Rev. AA, 28-Mar-2012
Page 8 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RNS0.9ET : 7.0 V / 0.86 A
All specifications apply over input voltage, output load and temperature range, unless otherwise noted.
Parameter
Conditions/Description
Min
Nom
Max
Unit
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Vo
Io
6.95
7.00
7.05
VDC
Vin.Nom, Io = 0.72 A, 25 °C
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
Vin.Nom, Io.Min to Io.Max
50-100% Io.Max load step
change.
0.08
0.86
100
ADC
mV
80
50
Load Regulation
Dynamic Regulation
Peak Deviation
Settling Time
Output Voltage Ripple
100
mV
250
250
50
± mV
μs
mVp-p
to 1% error band
Vr
Comax
Icl
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
25
Admissible Load
Capacitance
Output Current Limit
Threshold
2,200
150
μF
Vout ≤0.90 Vo.Nom
110
%Io.Max
Switching Frequency
Fs
Vin.Nom, Io.Max
410
kHz
Temperature
Coefficient
Trim Range
Tco
0.02
8.05
%Vo/°C
Vt
Io.Min to Io.Max, Vin.Min to
Vin.Max
5.95
Vo
* At Iout<Iout.Min, the output may contain low frequency component that exceeds ripple specifications.
Typical Characteristic Curves
Output Voltage Vs Load
Vout (V)
8.00
7.00
6.00
5.00
4.00
3.00
Vin Min
2.00
Vin Nom
1.00
Vin Max
0.00
Iout (A)
BCD.00038 Rev. AA, 28-Mar-2012
Page 9 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RNS0.6ZH : 12.0 V / 0.6 A
All specifications apply over input voltage, output load and temperature range, unless otherwise noted.
Parameter
Conditions/Description
Min
Nom
Max
Unit
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Vo
Io
11.83
12.00
12.18
VDC
Vin.Nom, Io = 0.3 A, 25 °C
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
0.06
0.6
50
ADC
mV
Load Regulation
Dynamic Regulation
Peak Deviation
Settling Time
Output Voltage Ripple
Vin.Nom, Io.Min to Io.Max
25-75% Io.Max load step
change.
250
mV
400
250
100
± mV
μs
mVp-p
to 1% error band
Vr
Comax
Icl
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
40
Admissible Load
Capacitance
Output Current Limit
Threshold
Switching Frequency
Temperature
220
140
μF
Vout ≤0.90 Vo.Nom
110
9.0
%Io.Max
Fs
Tco
Vin.Nom, Io.Max
400
kHz
%Vo/°C
0.02
15.0
Coefficient
Trim Range
Vt
Io.Min to Io.Max, Vin.Min to
Vin.Max
Vo
* At Iout<Iout.Min, the output may contain low frequency component that exceeds ripple specifications. The output voltage may
rise to a maximum of 14.0V
Typical Characteristic Curves
Output Voltage Vs Load
Efficiency Vs Load
Efficiency
Vout (V)
90.00%
16.00
80.00%
14.00
70.00%
12.00
10.00
8.00
6.00
4.00
2.00
0.00
60.00%
50.00%
40.00%
30.00%
20.00%
10.00%
0.00%
Vin Min
Vin Nom
Vin Max
Vin Min
Vin Nom
Vin Max
Iout (A)
Iout (A)
BCD.00038 Rev. AA, 28-Mar-2012
Page 10 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RND02ZGE:
All specifications apply over input voltage, output load and temperature range, unless otherwise noted.
Vo1: 5.2 V / 1.0 A
Parameter
Conditions/Description
Min
Nom
Max
Unit
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Vo
Io
Vin.Nom, Io1 = 0.6 A, Io2 =
0.9 A, 25 °C
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
5.08
0.1
5.2
5.24
1.0
VDC
ADC
mV
50
Load Regulation
Cross Regulation
Vin.Nom, Io.Min to Io.Max
Io1 =1.0A, Io2 Min to Max,
measure ΔVo1
120
220
130
mV
mV
Dynamic Regulation
Peak Deviation
Settling Time
25-75% Io.Max load step
change.
200
300
± mV
μs
to 1% error band
Output Voltage Ripple
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
Vout ≤0.90 Vo.Nom, both
outputs set to Icl
50
100
2,200
150
mVp-p
μF
Admissible Load Cap.
Output Current Limit
Threshold
110
%Io.Max
Switching Frequency
Temperature Coeff.
Vin.Nom, Io.Max
380
kHz
%Vo/°C
0.02
5.95
Io.Min to Io.Max, Vin.Min to
Vin.Max
Trim Range
4.43
Vo
Vo2: 3.27 V / 1.0 A
Parameter
Conditions/Description
Vin.Nom, Io1 = 0.6 A, Io2 =
0.9 A, 25 °C
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
Min
3.24
0.1
Nom
Max
3.3
1.0
40
Unit
V
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Vo
Io
3.27
A
mV
Load Regulation
Cross Regulation
Vin.Nom, Io.Min to Io.Max
Io2 =1.0A, Io1 Min to Max,
measure ΔVo2
100
210
90
mV
mV
Dynamic Regulation
Peak Deviation
Settling Time
25-75% Io.Max load step
change.
± mV
μs
200
300
to 1% error band
Output Voltage Ripple
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
Vout ≤0.90 Vo.Nom, both
outputs set to Icl
mVp-p
50
100
3,300
150
Admissible Load Cap.
Output Current Limit
Threshold
Switching Frequency
Temperature Coeff.
μF
%Io.Max
110
2.8
Vin.Nom, Io.Max
380
kHz
%Vo/°C
0.02
3.8
Io.Min to Io.Max, Vin.Min to
Vin.Max
Trim Range
Vo
* At Iout<Iout.Min, the output may contain low frequency component that exceeds ripple specifications.
BCD.00038 Rev. AA, 28-Mar-2012
Page 11 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RND02ZGE Typical Characteristic Curves
Cross Regulation Output 1 (+5V)
Cross Regulation Output 2 (+3.3V)
1. 2
1
1. 2
1
0.8
0.6
0.4
0.2
0
0.8
0.6
0.4
0.2
0
0
0.2
0.4
0.6
0.8
1
1.2
0
0.2
0.4
0.6
0.8
1
1.2
3.3V Output Current (A)
3.3V Output Current (A)
Output Vo2 Vs Load
Output Vo1 Vs Load
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Vin Min
Vin Nom
Vin Max
Vin Min
Vin Nom
Vin Max
0.0 0.1 0.3 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0
0.0 0.1 0.3 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Output Current (A)
Output Current (A)
Efficiency
90%
Efficiency Vs Load
80%
70%
60%
50%
40%
30%
20%
10%
0%
Vin Min
Vin Nom
Vin Max
0
Imin
25% Inom 50% Inom 75% Inom
Iout (A)
Inom
BCD.00038 Rev. AA, 28-Mar-2012
Page 12 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RND02ZGG
All specifications apply over input voltage, output load and temperature range, unless otherwise noted.
Note:- Maximum output power is 9W:
Vo1: +5.1 V / 0.75 A
Parameter
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Conditions/Description
Vin.Nom, Io1=Io2 = 0.3 A,
25 °C
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
Vin.Nom, Io.Min to Io.Nom
Io1 = 0.5A, Io2 Min to Nom,
measure ΔVo2
Min
5.06
0.1
Nom
5.1
Max
5.14
1.00
40
Unit
V
Vo
Io
0.75
A
mV
mV
mV
Load Regulation
Cross Regulation
100
250
100
Dynamic Regulation
Peak Deviation
Settling Time
25-75% Io.Max load step
change.
250
200
± mV
μs
to 1% error band
Output Voltage Ripple
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
Vout ≤0.90 Vo.Nom, both
outputs set to Icl
50
100
2,200#
150
mVp-p
μF
Admissible Load Cap.
Output Current Limit
Threshold
Switching Frequency
Temperature Coeff.
110
4.0
%Io.Max
Vin.Nom, Io.Max
400
kHz
%Vo/°C
0.02
7.0
Io.Min to Io.Max, Vin.Min to
Vin.Max
Trim Range
Vo
Vo2: -5.1 V / 0.75 A
Parameter
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Conditions/Description
Vin.Nom, Io1 =Io2 = 0.3 A,
25 °C
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
Min
-5.06
0.1
Nom
-5.10
0.75
Max
-5.14
1.0
Unit
V
Vo
Io
A
mV
40
Load Regulation
Cross Regulation
Vin.Nom, Io.Min to Io.Nom
Io2 = 0.5 A, Io1 Min to Max,
measure ΔVo1
100
250
100
mV
mV
Dynamic Regulation
Peak Deviation
Settling Time
25-75% Io.Max load step
change.
± mV
μs
250
200
to 1% error band
Output Voltage Ripple
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
Vout ≤0.90 Vo.Nom, both
outputs set to Icl
mVp-p
50
100
2,200#
150
Admissible Load Cap.
Output Current Limit
Threshold
μF
%Io.Max
110
Switching Frequency
Temperature Coeff.
Vin.Nom, Io.Max
400
kHz
%Vo/°C
0.02
–7.0
Io.Min to Io.Max, Vin.Min to
Vin.Max
Trim Range
–4.0
Vo
* At Iout<Iout.Min, the output may contain low frequency component that exceeds ripple specifications.
# 2200 μF on each output
BCD.00038 Rev. AA, 28-Mar-2012
Page 13 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RND02ZGG Typical Characteristic Curves
Ouput Vo2 Vs Load
Output Vo1 Vs Load
7.0
6.0
5.0
4.0
3.0
2.0
1. 0
7.0
6.0
5.0
4.0
3.0
Vin Min
Vin Nom
Vin Max
Vin Min
2.0
1.0
0.0
Vin Nom
Vin Max
0.0
0.0 0.1 0.3 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Output Current (A)
0.0 0.1 0.3 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Output Current (A)
Efficiency
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Efficiency Vs Load
Vin Min
Vin Nom
Vin Max
0
Imin
25% Inom 50% Inom 75% Inom
Iout (A)
Inom
BCD.00038 Rev. AA, 28-Mar-2012
Page 14 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RND0.8ZHH:
Vo1: +12.0 V / 0.42 A
All specifications apply over input voltage, output load and temperature range, unless otherwise noted.
Parameter
Conditions/Description
Vin.Nom, Io = 0.3 A, 25 °C
Min
Nom
Max
12.18
0.42
90
Unit
V
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Vo
Io
11.82
0.042
12.00
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
Vin.Nom, Io.Min to Io.Max
Io1 = 0.42 A, Io2 Min to Max,
measure ΔVo2
A
mV
mV
mV
Load Regulation
Cross Regulation
100
170
60
Dynamic Regulation
Peak Deviation
Settling Time
25-75% Io.Max load step
change.
± mV
μs
400
300
to 1% error band
Output Voltage Ripple
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
Vout ≤0.90 Vo.Nom, both
outputs set to Icl
40
100
100**
150
mVp-p
μF
Admissible Load Cap.
Output Current Limit
Threshold
110
%Io.Max
Switching Frequency
Temperature Coeff.
Trim Range
Vin.Nom, Io.Max
400
kHz
%Vo/°C
0.02
15.0
Io.Min to Io.Max, Vin.Min to
Vin.Max
9.0
Vo
Vo2: -12.0 V / 0.42 A
Parameter
Output Voltage
Setpoint Accuracy
Output Current *
Line Regulation
Conditions/Description
Vin.Nom, Io = 0.3 A, 25 °C
Min
Nom
Max
Unit
V
Vo
Io
–11.82 –12.00 –12.18
Vin.Min to Vin.Max
Vin.Min to Vin.Max, 50%
Io.Max
Vin.Nom, Io.Min to Io.Max
Io1 = 0.42A, Io2 Min to Max,
measure ΔVo2
0.042
0.42
90
A
mV
mV
mV
Load Regulation
Cross Regulation
100
170
60
Dynamic Regulation
Peak Deviation
Settling Time
25-75% Io.Max load step
change.
± mV
μs
400
300
to 1% error band
Output Voltage Ripple
Vin.Min to Vin.Max, Io.Min to
Io Max, 20 MHz Bandwidth
Io.Max, Vin.Nom
Vout ≤0.90 Vo.Nom, both
outputs set to Icl
40
100
100**
150
mVp-p
μF
Admissible Load Cap.
Output Current Limit
Threshold
110
%Io.Max
Switching Frequency
Temperature Coeff.
Trim Range
Vin.Nom, Io.Max
400
kHz
%Vo/°C
0.02
Io.Min to Io.Max, Vin.Min to
Vin.Max
–9.0
–15.0
Vo
* At Iout<Iout.Min, the output may contain low frequency component that exceeds ripple specifications.
** 100 μF on each output
BCD.00038 Rev. AA, 28-Mar-2012
Page 15 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RND0.8ZHH Typical Characteristic Curves
BCD.00038 Rev. AA, 28-Mar-2012
Page 16 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Temperature Considerations
The converter is designed for natural or forced The derating curves below give an indication of the output
onvection cooling. The output power of the power achievable with and without forced-air cooling.
converter is limited by the maximum case However in the final application, in order to ensure the
temperature (Tc). To ensure reliable long term reliability of the unit, care must be taken to ensure the
operation of the converters, and to comply with maximum case temperature is not exceeded under any
safety agency requirements, Power-One limits conditions
maximum allowable case temperature (Tc) to 110 °C
(see Mechanical Drawings).
.
BCD.00038 Rev. AA, 28-Mar-2012
Page 17 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Application and Auxiliary Functions
Shutdown (Remote Control)
Parameter
Remote Control:
Conditions/Description
Min
–1.0
Nom
Max
Units
Converter OFF
Converter ON
Sink Current
RC pin is pulled low
Voltage source or open circuit
Vin=Vin.Nom
1.0
6
V
V
mA
4.0
0.3
Synchronization:*
TTL compatible square wave on
sync pin. Referenced to –Vin
(RNS 4:1 input range)
Frequency Range
450
(520)
600
(688)
kHz
* All RNS except RNS0.6ZH, and RND0.8ZHH (as only RND model)
The remote control pin functions as a normal soft
shutdown. It is referenced to the –Vin pin. With
positive logic, when the remote control pin is pulled
low, the output is turned off and the unit goes into a
very low input power mode.
Synchronization Feature
It is possible to synchronize the switching frequency of
one or more converters to an external symmetrical
clock signal. It is recommended that the signal be
driven by a TTL compatible output. The rise time
of the clock signal should be less than 10 ns. If
the synchronization feature is not used, SYNC
(pin 7) should be left open-circuit.
An open collector switch is recommended to control
the voltage between the remote control pin and the -
Vin pin of the converter. The remote control pin is
pulled up internally, so no external voltage source is
required. The user should avoid connecting a resistor
between the remote control pin and the +Vin pin.
PUL (Programmable Undervoltage Lockout)
The user must take care to ensure that the pin
reference for the control is connected close to the -Vin
pin. The control signal must not be referenced ahead
of EMI filtering, or remotely from the unit. If the
remote control pin is not used, it can be left floating.
Note:- This feature is not available on 4:1 input range
devices, RNS01EE/RNS01EG/RNS0.9ET.
An external resistor can program the input voltage at
which the converter switches on. The voltage at which
the unit switches off, is typically 1V below the turn-on
input voltage (Vion).
External Components
This series of converters does not require any external
components for proper operation. However, if the
distribution of the input voltage to the converter
contains significant inductance, a capacitor across the
input terminals may be required to stabilize the input
voltage. A minimum of 1 μF, quality electrolytic /
ceramic capacitor is recommended for this purpose.
For output decoupling it is recommended to connect,
directly across the output pins, a 1 μF ceramic
capacitor (for 3.3 V and 5 V outputs) or a 0.27 μF
ceramic capacitor (for 7 V and 12 V outputs).
The characteristic curves below shows the typical
resistor values required to achieve adjustment of turn-
on input voltage (Vion).
BCD.00038 Rev. AA, 28-Mar-2012
Page 18 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
RND models
RNS models
To decrease Vion the resistor should be connected
between pins 10 and 11.
To decrease Vion the resistor should be connected
between pins 10 and 11.
RND0.8ZHH - Res is tance require d to
KOhm
2000
decrease Vion
KOhm
Resistance required to decrease Vion
1000
900
800
700
600
500
400
300
200
100
0
1500
1000
500
0
33.8
33.66
33.33
33
32
31
Voltage (Vion)
36
35.5
35
34.5
34
33.5
RND02ZGE- Resistance required to
decrease Vion
KOhm
Voltage (Vion)
16 0 0
14 0 0
12 0 0
10 0 0
800
600
400
200
0
To increase Vion the resistor should be connected
between pins 11 and 17.
Resistance required to increase Vion
KOhm
35.6
35.4
35
34.2
33.5
33
2000
1800
1600
1400
1200
1000
800
Voltage (Vion)
To increase Vion the resistor should be connected
between pins 11 and 17.
600
400
RND0.8ZHH - Resistance required to
increase Vion
200
0
KOhm
16 0 0
14 0 0
12 0 0
10 0 0
800
600
400
200
0
37
38
39
40
41
42
Voltage (Vion)
34.3
34.8
35.2
37.5
40.5
42
Voltage (Vion)
RND02ZGE - Resistance required to increase
Vion
KOhm
1600
1400
1200
1000
800
600
400
200
0
36.05
36.45
36.9
37.5
39.5
42
Voltage (Vion)
BCD.00038 Rev. AA, 28-Mar-2012
Page 19 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
2. The trim feature allows the generation of
additional standard voltages such as 2.5 V from
3.3 V model, 15 V from 12 V model and 6 V or 8 V
from the 7 V model, and ±15 V from the ±12 V
model.
Output Voltage Adjustment
Note: For setting nominal output voltage pin 8 must
be connected to pin 9.
The trim feature allows the user to adjust the output
voltage from the nominal. This can be used to
accommodate a different requirement or to do
production margin testing.
Output voltage can be adjusted by an external
resistor. If pin 8 and pin 9 are not connected together,
the output will decrease to a low value. To increase Vo
a resistor should be connected between pin 8 / 9 and
pin 17 ( –Vin). To decrease Vo, a resistor should be
connected between pin 8 and 9 (NOR).
Output Current Limitation
When the output is overloaded above the maximum
output current rating, the voltage will start to reduce to
maintain the output power to a safe level. In a
condition of high overload or short-circuit where the
output voltage is pulled below approximately 30% of
Vo.nom, the unit will enter a hiccup mode of operation.
Under this condition the unit will attempt to restart,
approximately every 100 ms until the overload has
cleared.
To increase Vo:
Radj = A × (B - Vd) / (Vd – Vo), kΩ
Where: Vd = Desired output voltage
Vo = Nominal output voltage.
Parallel Operation
Paralleling of two converters is possible by direct
connection of the output voltage terminal pins. The
load regulation characteristic is designed to facilitate
current sharing (typically ± 20%).
To reduce Vo:
Radj = C × (Vo – Vd) / (Vd – D), kΩ
Where: Vd = Desired output voltage
Vo = Nominal output voltage.
Model
A
B
C
D
RNS01EE
RNS03ZE
RNS01EG
RNS02ZG
RNS0.9ET
RNS0.6ZH
RND02ZGE
RND02ZGG
RND02ZHH
3.18
4.21
3.18
4.21
3.18
0.489
0.5
3.86
4.12
5.93
6.39
8.05
16.27
3.92
7.1
13
2.75
1.75
4.28
2.62
5.95
8.715
2.56
3.7
17.58
12.6
17.97
12.6
2.832
2.0
0.5
2.243
0.572
16.126 2.243
8.295
Notes:
1. When the output voltage is trimmed up, the output
power from the converter must not exceed its
maximum rating. This is determined by measuring
the output voltage on the output pins, and
multiplying it by the output current.
BCD.00038 Rev. AA, 28-Mar-2012
Page 20 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Safety Considerations
EMC Specifications
These converters are tested with 1500 VDC from input
to output. The input-to-output resistance is greater
than 10 MΩ. These converters are provided with Basic
Insulation between input and output. Nevertheless, if
the system using the converter needs to receive safety
agency approval, certain rules must be followed in the
design of the system. In particular, all of the creepage
and clearance requirements of the end-use safety
requirements must be observed.
Conducted Noise:
The converters meet the requirements class A of
IEC/EN 55022 (conducted noise on the input
terminals) without any external components. The
results for this solution are displayed below.
To meet class B, it is necessary to fit a 3.3 μF ceramic
capacitor across the input terminals.
In order to consider the output of the converter as
SELV (Safety Extra Low Voltage) or TNV-1, according
to IEC/EN 60950-1 and UL/CSA 60950-1, one of the
following requirements must be met in the system
design:
• Fuse: The converter has no internal fuse. An
external fuse must be provided to protect the
system from catastrophic failure. A fuse with a
rating not greater than 2.0 A is recommended. The
user can select a lower rating fuse based upon the
inrush transient and the maximum input current of
the converter, which occurs at the minimum input
voltage. Both input traces and the chassis ground
trace (if applicable) must be capable of conducting
a current of 1.5 times the value of the fuse without
opening. The fuse must not be placed in the
grounded input line, if any.
Electromagnetic Susceptibility:
• If the voltage source feeding the converter is SELV,
TNV-1, or TNV-2, the output of the converter is
considered SELV and may be grounded or
ungrounded.
Standard
Applied Class Performance
Stress Level
criterion *
Electrostatic
Discharge
EN61000-4-2
Electromagnetic
Field
EN61000-4-3
Electrical Fast
Transient
EN61000-4-4
Conducted
Disturbances
EN61000-4-6
2 kV to
pins
1
2
3
2
B
• The circuitry of the converter may generate
transients, which exceed the input voltage. Even if
the input voltage is SELV (<60 V), the components
on the primary side of the converter may have to
be considered as hazardous. A safety interlock
may be needed to prevent the user from accessing
3 V/m
A
B
B
2000 Vp
to input
the converter while operational.
3 VAC
to input
*
A
denotes normal operation; no deviation from
specification.
B means temporary deviation from specification is
possible.
BCD.00038 Rev. AA, 28-Mar-2012
Page 21 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Mechanical Data
Dimensions in mm [inches]
inherent to all high copper alloys. Unlike brasses,
this material is essentially immune to stress
corrosion cracking. It also exhibits excellent
solderability. It is readily wetted by solders and
performs well in standard solderability tests. (Dip of
Class II or better).
Surface Mount Assembly
Soldering
The following soldering instructions must be
observed to prevent failure or significant degradation
of the module performance. Power-One will not
honor any warranty claims arising from failure to
observe these instructions.
The product is manufactured with a patented
process, which is fully automated, and ‘in-line’. This
ensures that there is no contamination or
mechanical stress on the lead-frame so that the co
planarity and solderability are maintained.
The lead-frame is constructed for
a
high
temperature glass filled, UL94 V-0 flame retardant,
dually ortho-phthalate molding compound commonly
used for packaging of electronics components. It
has passed NASA outgassing tests, and is certified
to MIL-M-14. The coefficient of thermal expansion is
equivalent to FR4.
The product is shipped in JEDEC trays to ensure
preservation of the co-planarity and enable fully
automated assembly in the final application. Mind
the marking for pin 1!
The gull wing leads are formed to ensure optimal
solder joint strength and structure. Furthermore they
facilitate visual inspection (manual or automatic).
The leads are formed from a 97% Cu alloy plated
with Ni and matte Sn. This material is commonly
used
These products are approved for forced convection
reflow soldering only. Products RoHS-compliant for
all 6 substances (model designation ending with -
M6G) allow for
a
solder profile with higher
temperatures; see following tables.
in the manufacture of integrated circuits. It has good
corrosion resistance and exhibits the nobility
BCD.00038 Rev. AA, 28-Mar-2012
Page 22 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Recommended Reflow Profile (measured at the leads of the converter)
Ramp to
reflow
Product
Pre-heat ramp
Pre-heat soaking
Reflow
Time within Time
Cooling
Time
above
liquidus
Peak
From
To
Rate
From
To
Time
Rate
±5 °C of
to
Rate
temp.
peak temp
peak
°C
25
°C
°C/s
2
°C
°C
s
°C
2
s
°C
s
s
°C/s
3
-M6
150
150
183
90 - 120
45
220 ±5
10
180
(Sn-Pb eutectic)
-M6G
(lead-free)
25
180
2
180
217
90 - 120
2
45
240 ±5
10
210
3
Worst Case Reflow Parameters Following J-STD-020D (measured in the center, on top side of the converter)
Ramp to
reflow
Product
Pre-heat ramp
Pre-heat soaking
Reflow
Cooling
Max. time Max.
Max. time
within ±5 °C time to Rate
temp. of peak temp. peak
Max.
Max.
time
From
To
Rate
From
To
Rate
above
peak
liquidus
°C
25
°C
°C/s
3
°C
°C
s
°C
3
s
°C
s
s
°C/s
-M6
150
100
150
120
45
230
10
360
6
(Sn-Pb eutectic)
-M6G
(lead-free)
25
180
3
150
200
120
3
45
260
10
480
6
Pick & Place Assembly
Recommended solder lands
The product is designed with a large flat area in the
center of the top surface to serve as a pick up point
for automated vacuum pick and place equipment.
The ‘open board’ construction of the unit ensures
that weight is kept to a minimum. However due to the
relatively large size of the component, a large nozzle
(>6.0mm, depending on vacuum pressure) is
recommended for picking and placing.
The unit may also be automatically handled using
‘odd-form’ placement equipment, with mechanical
grippers. For this type of equipment the end edges of
the device, which have no leads and also feature the
greatest dimensional accuracy, should be used as
pick-up points.
BCD.00038 Rev. AA, 28-Mar-2012
Page 23 of 24
www.power-one.com
RNS/RND Series Data Sheet
10 W SMT DC-DC Converters
Packaging: JEDEC Tray
Dimensions in mm [inches]
322.6
62.1
33.3
315
12.19
JEDEC TRAY
Pin Allocation
Pin
1
2
3
4
Designation
+Vo
Single-output models
Designation
+Vo1
RTN
–Vo2
n.c.
Double-output models
Output voltage 1
Output voltage return
Referenced to
Secondary
Secondary
Secondary
Secondary
Secondary
Primary
Positive output
Negative output
–Vo
n.c.
n.c.
n.c.
n.c.
n.c.
n.c.
Output voltage 2.
n.c.
n.c.
5
n.c.
6
7
n.c.
n.c.
Synchronization input
Output voltage adjust.
Nominal output voltage
Turn-on/off adjust
Shutdown
n.c.
n.c.
Synchronization input
Output voltage adjust.
Nominal output voltage
Turn-on/off adjust
Shutdown
Sync
Trim1
NOR1
PUL2
SD
n.c.
n.c.
n.c.
n.c.
Sync
Trim1
NOR1
PUL2
SD
n.c.
n.c.
n.c.
n.c.
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
81
91
102
11
12
13
14
15
16
17
18
n.c.
n.c.
n.c.
n.c.
n.c.
n.c.
n.c.
n.c.
n.c.
–Vin
+Vin
n.c.
n.c.
–Vin
+Vin
n.c.
Negative input
Positive input
Negative input
Positive input
1
Connect pin 8 to pin 9, in order to get the nominal output voltage
This feature is not available on 4:1 input range devices, RNS01EE, RNS01EG, RNS0.9ET.
2
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical
components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written
consent of the respective divisional president of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on
the date manufactured. Specifications are subject to change without notice.
BCD.00038 Rev. AA, 28-Mar-2012
Page 24 of 24
www.power-one.com
相关型号:
![](http://pdffile.icpdf.com/pdf1/p00031/img/page/RNS02_161395_files/RNS02_161395_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00031/img/page/RNS02_161395_files/RNS02_161395_2.jpg)
RNS02ZG-M6
RNS Series: 5-10W DC/DC Converters 18-72 & 38-75V Input 3.3V, 5.0V, 7.0V and 12V Outputs Outputs of 2.5V & 15V, available with trimming
POWER-ONE
![](http://pdffile.icpdf.com/pdf1/p00033/img/page/RNS03_170791_files/RNS03_170791_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00033/img/page/RNS03_170791_files/RNS03_170791_2.jpg)
RNS03ZE-M6
RNS Series: 5-10W DC/DC Converters 18-72 & 38-75V Input 3.3V, 5.0V, 7.0V and 12V Outputs Outputs of 2.5V & 15V, available with trimming
POWER-ONE
©2020 ICPDF网 联系我们和版权申明