S558-5999-93 [BEL]
HIGH SPEED LAN MAGNETICS; 高速局域网MAGNETICS型号: | S558-5999-93 |
厂家: | BEL FUSE INC. |
描述: | HIGH SPEED LAN MAGNETICS |
文件: | 总2页 (文件大小:346K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
defining a degree of excellence
HIGHSPEEDLANMAGNETICS
960019B
• Designed for use with Microlinear ML6692/6694/6698
PHY transceivers in either 10/100 Mbps or 100 Mbps
applications
• 40 pin low profile, surface mount packaging, rated to
225ºC peak IR reflow temperature
• 2000 Vrms isolation
• Dual, 2-port designs offer highest degree of
performance, board space and cost efficiency
ELECTRICALS AT 25ºC
Insertion Loss
(dB) Typ
Return Loss
(dB) Min
Return Loss
(dB) Min
30MHz-60MHz
Return Loss
(dB) Min
60MHz-80MHz
Crosstalk
(dB) Min
1MHz-100MHz
Common to Diff
Mode Rej (dB) Min
30MHz 100MHz
Common to Common
Mode Rej (dB) Min
30MHz 100MHz
Part No.
1MHz-100MHz
1MHz-30MHz
Schematic
S558-5999-92
S558-5999-93
-1.0
-1.0
-16
-16
16-20log(f/30MHz)
16-20log(f/30MHz)
-10
-10
-35
-35
-50
-50
-40
-40
-50
-50
-40
-40
A
B
SCHEMATICS
B
A
MECHANICAL
Specifications subject to change without notice.
Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: BelFuse@belfuse.com
Website: http://www.belfuse.com
defining a degree of excellence
HIGHSPEEDLANMAGNETICS
960019B
APPLICATION CIRCUIT
APPLICATION NOTES
• These Bel part types have been designed for use in 100 Mbps or 10/100 Mbps data transmission systems over
category 5 UTP/STP cable. Each Bel part type provides superior EMI noise suppression, high voltage isolation, wave
shaping and fast, but controlled rise times. All parts meet IEEE 802.3 standards, which includes 350µH OCL
(inductance) when 8mA of DC bias is applied.
• These part types are recommended for use with Microlinear ML6692/6694/6698 PHY transceivers. These Bel dual, 2-
port solutions provide a cost effective design solution for multi-port repeater and switch applications with no
performance degradation versus similar single port solutions.
• Bel's low profile, surface mount packaging is ideal for high speed pick and place machinery. Parts can be shipped on
tape and reel for high speed placement. Construction processes have been implemented for thermal compatibility
with high temperature IR reflow assembly processing. Post dipping of leads assist with PC board solderability. Each
part is optically inspected to meet rigid coplanarity requirements.
Corporate Office
Bel Fuse Inc.
198 Van Vorst Street, Jersey City, NJ 07302-4496
Tel: 201-432-0463
Fax: 201-432-9542
E-Mail: BelFuse@belfuse.com
Internet: http://www.belfuse.com
Far East Office
Bel Fuse Ltd.
8F/8 Luk Hop Street
European Office
Bel Fuse Europe Ltd.
Preston Technology Management Centre
Marsh Lane, Preston PR1 8UD
Lancashire, U.K.
Tel: 44-1772-556601
Fax: 44-1772-888366
San Po Kong
Kowloon, Hong Kong
Tel: 852-2328-5515
Fax: 852-2352-3706
相关型号:
©2020 ICPDF网 联系我们和版权申明