SRAH-12F100G [BEL]
DC-DC Regulated Power Supply Module, 1 Output, 12W, Hybrid, ROHS COMPLIANT, SMD-7;型号: | SRAH-12F100G |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 12W, Hybrid, ROHS COMPLIANT, SMD-7 转换器 电源电路 |
文件: | 总9页 (文件大小:242K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NON-ISOLATED DC/DC CONVERTERS
3.0 V-5.5 V Input
1.0 V-3.3 V/12 A Output
xRAH-12Fxx0 Series
RoHS Compliant
•
•
•
•
Non-Isolated
•
•
•
•
OCP/SCP
Fixed frequency (300 kHz)
Low profile package (7.82 mm)
Under-voltage lockout (UVLO)
Trim function (Option)
Remote On/Off
Remote Sense (SMD module)
Description
The Bel xRAH-12Fxx0 series are part of the low cost non-isolated dc/dc converter series. These converters are
available in a range of output voltages from 1.0 V to 3.3 V. It is packaged in a compact, overmolded package
rated at 12 A. The output is closely regulated and the efficiency of 3.3 V output module is typically 93% at full
load. Typical features include remote on/off, input under voltage lockout, over current protection and short circuit
protection.
Part Selection
Output
Voltage
3.3 V
Input
Voltage
Max. Output
Current
12 A
Max. Output
Power
Typical
Efficiency
93%
Part Number
Surface Mount
SRAH-12F330
Part Number
Vertical Mount
VRAH-12F330
4.5 V - 5.5 V
39.6 W
2.5 V
1.8 V
1.5 V
1.2 V
1.0 V
3.6 V - 5.5 V
3.0 V - 5.5 V
3.0 V - 5.5 V
3.0 V - 5.5 V
3.0 V - 5.5 V
12 A
12 A
12 A
12 A
12 A
30.0 W
21.6 W
18.0 W
14.4 W
12.0 W
89%
87%
84%
82%
80%
SRAH-12F250
SRAH-12F180
SRAH-12F150
SRAH-12F120
SRAH-12F100
VRAH-12F250
VRAH-12F180
VRAH-12F150
VRAH-12F120
VRAH-12F100
Note: Add “0” suffix at the end of the model number to indicate “Tube Packaging”, and “R” for “Reel
Packaging”, and “G” for “Tray Packaging”.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Notes
Input Voltage (continuous)
-0.3 V
-
6 V
Output Enable Terminal Voltage
Ambient Temperature
-0.3 V
-40 °C
-55 °C
-
-
-
7 V
85 °C
125 °C
Storage Temperature
Input Specifications
Parameter
Min
Typ
Max
Notes
Input Voltage
VO=3.3 V
VO=2.5 V
VO=1.8-1.0 V
4.5 V
3.6 V
3.0 V
-
-
-
5.5 V
5.5 V
5.5 V
Input Current (no load)
Input Current (full load)
-
120 mA
200 mA
VO=3.3 V
VO=2.5 V
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=1.0 V
-
-
-
-
-
-
-
-
-
-
-
-
11 A
10.5 A
9.0 A
8.1 A
6.5 A
5.2 A
Remote Off Input Current
-
2 mA
5 mA
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
3.0 V-5.5 V Input
1.0 V-3.3 V/12 A Output
Input Specifications (continued)
Parameter
Min
Typ
Max
Notes
With simulated source impedance of
500 nH, 5 Hz to 20 MHz; use a
270 uF/6.3 V cap with ESR=0.03 ohm
max at 100 kHz
Input Reflected Ripple Current (pk-pk)
-
260 mA
320 mA
Input Reflected Ripple Current (rms)
-
-
75 mA
120 mA
I2t Inrush Current Transient
Turn on Voltage Threshold
Turn off Voltage Threshold
0.09 A2s
2.1 V
2 V
0.2 A2s
-
-
2.4 V
Note: All specifications are typical at 25 °C unless otherwise stated.
Output Specifications
Parameter
Min
Typ
Max
Notes
Output Voltage Set Point
VO=3.3 V 3.234 V
VO=2.5 V 2.450 V
VO=1.8 V 1.764 V
VO=1.5 V 1.470 V
VO=1.2 V 1.176 V
VO=1.0 V 0.980 V
-
3.3 V
2.5 V
1.8 V
1.5 V
1.2 V
1.0 V
±1 mV
3.366 V
2.550 V
1.836 V
1.530 V
1.224 V
1.020 V
±4 mV
Test conditions:
Vin=5 V, Io= 50% load
Line Regulation
Load Regulation
-
±2 mV
±5 mV
Regulation Over Temperature
(-40 °C to +85 °C)
±10 mV
±9 mV
±7 mV
±6 mV
±5 mV
±4 mV
-
±15 mV
±13 mV
±12 mV
±11 mV
±10 mV
±9 mV
12 A
-
-
-
-
-
-
VO=3.3 V
VO=2.5 V
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=1.0 V
Output Current
0 A
20 A
-
Current Limit Threshold
Short Circuit Surge Transient
-
30 A
0.6 A2s
0.3 A2s
Test conditions:
Ripple and Noise (rms)
Ripple and Noise (pk-pk)
-
-
12 mV
50 mV
21 mV
90 mV
0-20 MHz BW; 1 uF ceramic
capacitor and 330 uF external
capacitor at the output.
Turn on Time
-
5 mS
0%
-
10 mS
3%
Overshoot at Turn on
Output Capacitance
Transient Response
-
330 uF
4800 uF
-
-
-
-
-
-
-
-
-
-
-
-
Overshoot
Settling Time
Overshoot
Settling Time
Overshoot
Settling Time
Overshoot
Settling Time
Overshoot
110 mV
40 uS
110 mV
40 uS
100 mV
30 uS
100 mV
30 uS
90 mV
20 uS
90 mV
20 uS
150 mV
80 uS
150 mV
80 uS
150 mV
60 uS
150 mV
60 uS
130 mV
40 uS
130 mV
40 uS
50% ~ 100%
Max Load
100% ~ 50%
Max Load
VO=3.3 V
VO=2.5 V
50% ~ 100%
Max Load
Test conditions:
di/dt=0.5A/us, Vin=5V, with
330uF external load
capacitance.
100% ~ 50%
Max Load
50% ~ 100%
Max Load
Settling Time
Overshoot
Settling Time
VO=1.0 V -
1.8 V
100% ~ 50%
Max Load
Note: All specifications are typical at 5 V input, full load at 25 °C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
3.0 V-5.5 V Input
1.0 V-3.3 V/12 A Output
General Specifications
Parameter
Min
Typ
Max
Notes
Efficiency
VO=3.3 V
90%
86%
84%
81%
79%
77%
93%
89%
87%
84%
82%
80%
-
-
-
-
-
-
VO=2.5 V
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=1.0 V
Vin=5 V, full load
Efficiency
VO=1.8 V
VO=1.5 V
VO=1.2 V
VO=1.0 V
85%
81%
79%
76%
88%
84%
82%
79%
-
-
-
-
Vin=3.3 V, full load
Switching Frequency
Output Trim Range
250 kHz
90%VO
-
300 kHz
350 kHz
110%VO
10%
-
-
Remote Sense Compensation
MTBF
SMD module
Calculated Per Bell Core SR-332 (IO
= 9.6 A, Vin=5 V; Ta = 25 °C)
4,038,174 hours
Dimensions (surface mount)
Inches (L × W × H)
0.78 x 0.70 x 0.32
Millimeters (L × W × H)
Dimensions (vertical)
Inches (L × W × H)
19.81 x 17.78 x 8.128
0.70 x 0.308 x 0.65
17.78 x 7.82 x 16.51
Millimeters (L × W × H)
Weight
-
5.1 g
-
Control Specifications
Parameter
Min
Typ
Max
Notes
Remote On/Off
-
-
-
-
-
-
-
-
-
0.9 V (Vin=3.0 V)
Signal Low (Unit Off)
Signal High (Unit On)
1.35 V (Vin=4.5 V)
1.65 V (Vin=5.5 V)
Remote on/off pin open, unit on.
2.1 V (Vin=3.0 V)
3.15 V (Vin=4.5 V)
3.85 V (Vin=5.5 V)
-
-
-
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
3.0 V-5.5 V Input
1.0 V-3.3 V/12 A Output
Output Trim Equations
Equations for calculating the trim resistor (in kΩ) given the desired adjusted voltage (Vadj) and the nominal
output voltage of the converter (Vnom) are shown below. The Trim Down resistor should be connected between
the Trim pin and Vout. The Trim Up resistor should be connected between the Trim pin and Ground. Only one of
the resistors should be used for any given application.
Vout
A
Rtrimdown
RTrimDown
=
− B
Module
Trim
Vnom −Vadj
GND
Vout
Trim
C
RTrimUp
=
− D
Module
Vadj −Vnom
Rtrimup
GND
Vnom
3.3
A
B
C
D
161.391
161.900
208.900
287.900
287.900
208.900
161.900
43.330
43.330
43.330
43.330
43.330
43.330
100.000
2.5
111.674
68.576
50.000
31.240
18.850
147.000
226.000
226.000
147.000
100.000
1.8
1.5
1.2
1.0
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
3.0 V-5.5 V Input
1.0 V-3.3 V/12 A Output
Efficiency Data
Efficiency Curve
Efficiency Curve
94.00%
92.00%
90.00%
88.00%
86.00%
84.00%
82.00%
80.00%
78.00%
76.00%
74.00%
98.00%
96.00%
94.00%
92.00%
90.00%
88.00%
86.00%
84.00%
82.00%
80.00%
78.00%
4.5 V
3.6 V
4.5 V
5.5 V
5.0 V
5.5 V
1
2
3
4
5
6
7
8
9
10 11 12
1
2
3
4
5
6
7
8
9
10 11 12
Output Current (A)
Output Current (A)
xRAH-12F330
xRAH-12F250
Efficiency Curve
Efficiency Curve
92.00%
94.00%
90.00%
88.00%
86.00%
84.00%
82.00%
80.00%
78.00%
76.00%
74.00%
72.00%
70.00%
92.00%
90.00%
88.00%
86.00%
84.00%
82.00%
80.00%
78.00%
76.00%
74.00%
72.00%
70.00%
3.0 V
3.3 V
5.0 V
5.5 V
3.0 V
3.3 V
5.0 V
5.5 V
1
2
3
4
5
6
7
8
9
10 11 12
1
2
3
4
5
6
7
8
9
10 11 12
Output Current (A)
Output Current (A)
xRAH-12F180
xRAH-12F150
Efficiency Curve
Efficiency Curve
92.00%
90.00%
88.00%
86.00%
84.00%
82.00%
80.00%
78.00%
76.00%
74.00%
72.00%
70.00%
68.00%
90.00%
88.00%
86.00%
84.00%
82.00%
80.00%
78.00%
76.00%
74.00%
72.00%
70.00%
3.0 V
3.3 V
5.0 V
5.5 V
3.0 V
3.3 V
5.0 V
5.5 V
1
2
3
4
5
6
7
8
9
10 11 12
1
2
3
4
5
6
7
8
9
10 11 12
Output Current (A)
Output Current (A)
xRAH-12F120
xRAH-12F100
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
3.0 V-5.5 V Input
1.0 V-3.3 V/12 A Output
Thermal Derating Curves
SRAH-12F330
VRAH-12F330
SRAH-12F250
VRAH-12F250
SRAH-12F180
VRAH-12F180
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
3.0 V-5.5 V Input
1.0 V-3.3 V/12 A Output
Thermal Derating Curves (continued)
SRAH-12F150
VRAH-12F150
SRAH-12F120
VRAH-12F120
SRAH-12F100
VRAH-12F100
Test Condition: Derating curves are tested at 5 V input.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
3.0 V-5.5 V Input
1.0 V-3.3 V/12 A Output
Mechanical Outline
SRAH-12Fxx0
Pin Connections
Pin
Function
1
Remote On/Off (option)
2
Vin
Ground
3
bel
4
Vout
5
Trim (option)
Remote Sense (option)
N/A
6
7
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
3.0 V-5.5 V Input
1.0 V-3.3 V/12 A Output
Mechanical Outline (continued)
VRAH-12Fxx0
bel
bel
Pin Connections
Pin
Function
1
Remote On/Off (option)
2
Vin
Ground
Vout
3
4
5
Trim (option)
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and
other hazardous substances from electronic products. These parts are not however
compatible with the higher temperatures associated with lead free solder processes and
must be soldered using a reflow profile with a peak temperature of no more than 240 ºC.
©2005 Bel Fuse Inc. Specifications subject to change without notice. 112305
CORPORATE
FAR EAST
EUROPE
Bel Fuse Inc.
Bel Fuse Ltd.
Bel Fuse Europe Ltd.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
8F/ 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
相关型号:
UL1042
UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowegoWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV201
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14
IC-SM-VIDEO AMPWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TA
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TC
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV302N16
IC-SM-4:1 MUX SWITCHWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV4089
VIDEO AMPLIFIER WITH DC RESTORATIONWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
©2020 ICPDF网 联系我们和版权申明