首页 |元器件品牌

TQD085ZED-AN9 [BEL]

DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid;
TQD085ZED-AN9
型号： TQD085ZED-AN9
厂家： BEL FUSE INC.    BEL FUSE INC.
描述：

DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
文件： 总3页 (文件大小：89K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
TQD DC/DC Series Data Sheet  
Dual Output, 100 Watts  
Features  
• Independent dual outputs  
• Flexible load sharing  
• High efficiency  
• Open-frame design  
• Planar magnetics  
• Independent trim for each output  
• Synchronous rectification  
• 1500V isolation  
• 100°C baseplate operation  
Description  
The TQD DC/DC converters are high power, dual output, fully-isolated converters that feature high efficiency, 1500  
VDC isolation, and open-frame packaging. The TQD family allows board designers to deliver any combination of  
power from either output, up to each model’s maximum rating. The TQD Series is available in 5V/3.3V or 3.3V/2.5V  
combinations. The TQD uses planar magnetics and has an MTBF of over a million hours.  
Technical Specifications  
Input  
Voltage range  
5 VDC nominal  
12 VDC nominal  
Reflected ripple  
18 - 36 VDC  
36 - 72 VDC  
50 mA  
Input Reverse Voltage Protection  
Shunt Diode  
Efficiency vs. Load (48V Input)  
Output  
90  
85  
80  
75  
70  
65  
60  
55  
Setpoint Accuracy  
1%  
Line Regulation V Min. - V Max., I  
Rated, Output 1  
0.2% V  
in  
out  
in  
Min. - I  
out  
Max., V Nom., Output 1  
out  
Load Regulation I  
0.3% V  
out  
out  
in  
Minimum Output Current, Each Output  
Dynamic Regulation, Loadstep  
Pk Deviation  
10 % I  
Rated  
out  
25% I  
4% V  
out  
out  
Settling Time  
Voltage Trim Range  
Power Limit Threshold Range, % of I  
OVP Trip Range  
UVP Trip Range  
500 m s  
10%  
TQD085ZED  
TQD100ZGE  
Rated  
110 - 130%  
Nom.  
70 - 90%  
out  
115 - 140% V  
out  
General  
10  
20  
30  
40  
50  
60  
70  
80  
90  
100  
LOAD %  
Turn-On Time  
20 ms  
Positive Logic  
250 kHz  
Remote Shutdown  
Switching Frequency  
Isolation  
Input - Output  
Input - Case  
Output - Case  
1500 VDC  
1050 VDC  
500 VDC  
Notes  
MTBF predictions may vary slightly from model to model.  
Temperature Coefficient  
Case Temperature  
Operating Range  
Storage Range  
0.03 %/°C  
†
-40 To +100°C  
-40 To +125°C  
105 To 115°C  
95%  
Specifications typically at 25°C, normal line, and full load, unless  
otherwise stated.  
Thermal Shutdown Range  
Humidity Max., Non-Condensing  
Vibration, 3 Axes, 5 Min Each  
†
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with  
commercial wave-soldering equipment.  
5 g  
Units are water-washable and fully compatible with commercial spray or  
immersion post wave-solder washing equipment.  
6
MTBF (Bellcore TR-NWT-000332)  
Safety  
1.2 X 10 hrs  
UL, cUL, TUV  
3.8 oz  
Weight (Approx.)  
REV. AUG 11, 2003  
Page 1 of 3  
TQD DC/DC Series Data Sheet  
Dual Output, 100 Watts  
Model Selection  
INPUT VOLTAGE  
INPUT VOLTAGE  
RANGE (VOLTS)  
MAXIMUM INPUT  
CURRENT (AMPS)*  
OUTPUT  
VOLTAGE (VOLTS)  
RATED OUTPUT  
CURRENT (AMPS)  
RIPPLE & NOISE  
pk-pk (mV)  
TYPICAL  
EFFICIENCY**  
MODEL  
(VOLTS)  
TQD080ZE2.0-A  
TQD085ZED-A  
TQD100ZGE-A  
48  
48  
48  
36-72  
36-72  
36-72  
1.9  
2.5  
3.7  
3.3/2.0  
3.3/2.5  
5.0/3.3  
15/15  
20/25  
20/25  
100/75  
100/75  
100/75  
80%  
82%  
83%  
NOTES:  
*
Maximum input current at minimum input voltage, maximum rated output power.  
** At nominal V , rated output.  
in  
Current can be drawn from either output to its maximum value, or from both outputs.  
Mechanical Drawing  
Pin  
Function  
Tolerances  
(Millimeters)  
Thermal Impedance  
Natural Convection  
100 LFM  
200 LFM  
300 LFM  
400 LFM  
1
-V  
in  
Enable  
Case  
Inches:  
.XX  
.XXX 0.010  
5.7 °C/W  
3.9 °C/W  
2.6 °C/W  
1.9 °C/W  
1.7 °C/W  
2
3
4
0.020  
.X 0.5  
.XX 0.25  
+V  
in  
Pin:  
0.002  
5
+V  
out1  
0.05  
6
7
8
9
+ Sense 1  
Trim 1  
- Sense 1  
(Dimensions as listed unless  
otherwise specified.)  
Note:  
-V  
Thermal impedance data is dependent  
on many environmental factors. The  
exact thermal performance should be  
validated for specific application.  
out1  
10  
-V  
out2  
11  
12  
13  
14  
- Sense 2  
Trim 2  
+ Sense 2  
+ V  
out2  
REV. AUG 11, 2003  
Page 2 of 3  
OPTIONS  
This page is offered as a reference. Consult factory for actual availability of options. When ordering  
equipment options, use the following suffix information. Select preferred option(s) and add the suffix to the  
model number. Ordering option examples are located below the options table.  
OPTION  
Negative Logic  
SUFFIX  
APPLICABLE SERIES  
REMARKS  
N
HAS, HBD, HBS, HES, HLS, HLD, LES,  
QBS, QES, QLS, TES, TQD  
TTL "Low" Turns Module ON  
TTL "High" Turns Module OFF  
Lucent-Compatible Trim  
T
HAS, HBD, HBS, HES, HLS, QBS, QES,  
QLS  
Trim  
1
2
3
IAS, LES  
Enable  
IAD, IAS, LES, SMS  
IAS, LES  
Trim and Enable  
Pin Length and Heatsink Options  
0.110" (2.8mm) Pin Length  
Standard Pin Length is 0.180" (4.6mm)  
8
9
All Leaded Models  
All Leaded Models  
0.150" (3.8mm) Pin Length  
0.24" (6.1mm) Horizontal Heatsink  
1H  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
Includes Thermal Pad  
0.24" (6.1mm) Vertical Heatsink  
0.45" (11.4mm) Horizontal Heatsink  
0.45" (11.4mm) Vertical Heatsink  
0.95" (24.1mm) Horizontal Heatsink  
0.95" (24.1mm) Vertical Heatsink  
1V  
2H  
2V  
3H  
3V  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks  
(Except HLS, HLD, QLS, TLD, and TKD Packages)  
Example Options:  
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent-compatible trim, and 0.95” vertical heatsink.  
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.  
QBS066ZG-AT8 = QBS066ZG-A with Lucent-compatible trim and 0.110” pin length.  
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems,  
equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of  
Power-One, Inc.  
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the  
date manufactured. Specifications are subject to change without notice.  
REV. AUG 11, 2003  
Page 3 of 3  

相关型号：

TQD085ZED-AN91H

 DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
BEL

TQD085ZED-AN92V

 DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
BEL

TQD085ZED-AN93H

 DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
BEL

TQD085ZED-AN93V

 DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
BEL

TQD100YGE

 DUAL OUTPUT, 100 WATT
POWER-ONE

TQD100YGE

 DC-DC Regulated Power Supply Module, 2 Output, 100W
BEL

TQD100YGE-A

 DUAL OUTPUT, 100 WATT
POWER-ONE

TQD100YGE-A

 DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
BEL

TQD100YGE-A1V

 DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
BEL

TQD100YGE-A2V

 DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
BEL

TQD100YGE-A3H

 DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
BEL

TQD100YGE-A3V

 DC-DC Regulated Power Supply Module, 2 Output, 100W, Hybrid
BEL
©2020 ICPDF网 联系我们和版权申明