V7PB-06F18L [BEL]

DC-DC Regulated Power Supply Module, 1 Output, 11W, Hybrid, ROHS COMPLIANT, PACKAGE-11;


型号：	V7PB-06F18L
厂家：	BEL FUSE INC.
描述：	DC-DC Regulated Power Supply Module, 1 Output, 11W, Hybrid, ROHS COMPLIANT, PACKAGE-11
文件：	总10页 (文件大小：356K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

1.2 Vdc - 3.3 Vdc / 6 A Output

xRPB-06F series

RoHS Compliant

Rev.A

•

Non-Isolated

•

Under Voltage Lockout (UVLO)

High Efficiency

OCP/SCP

High Power Density

Fixed Frequency (300 kHz)

Power Good Output Signal

Can Sink & Source Current

Remote On/Off

Remote Sense

Trim Function

Active High/Low (Options)

Description

The Bel xRPB-06Fxxx modules are a series of non-isolated high density open frame dc/dc converters that can

deliver up to 6 A of output current with full load efficiency of 94% at 3.3 Vdc output. Their open-frame

construction and small footprint enable designers to develop cost and space-efficient solutions. Standard

features include remote On/Off, power good output signal, over current protection and short circuit protection.

Part Selection

Max.

Output

Current Power

6 A

Max.

Output

Model

Number

Model

Number

Active Low

VRPB-06F33L

VRPB-06F25L

VRPB-06F21L

VRPB-06F18L

VRPB-06F15L

VRPB-06F12L

Model

Number

Active Low

Output

Input

Typical

Efficiency

Voltage

Active High

VRPB-06F330

VRPB-06F250

VRPB-06F210

VRPB-06F180

VRPB-06F150

VRPB-06F120

3.3 V

2.5 V

2.1 V

1.8 V

1.5 V

1.2 V

4.5 V - 5.5 V

3.0 V - 5.5 V

20 W

15 W

13 W

11 W

9 W

94%

92%

91%

89%

88%

85%

VRPB-06F33W¹

VRPB-06F25W¹

VRPB-06F21W¹

VRPB-06F18W¹

VRPB-06F15W¹

VRPB-06F12W¹

7 W

Notes: 1. “W” indicates special coating.

2. Add “G” suffix at the end of the model number listed above to indicate Tray Packaging. Change the

first letter of the model number from “V” to “0” for horizontal mount package.

3. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.

Absolute Maximum Ratings

Parameter

Input Voltage (continuous)

Output Enable Terminal Voltage

Ambient Temperature

Min

Typ

Max

5.8 V

5.5 V

85 °C

125 °C

Notes

-0.3 V

-40 °C

Storage Temperature

Note: All specifications are typical at 25 °C unless otherwise stated.

Input Specifications

Parameter

Min

Typ

Max

Notes

Input Voltage

Vo ≤ 2.1 V

Vo > 2.1 V

3.0 V

4.5 V

5.5 V

Input Current (full load)

Vo=3.3 V

Vo=2.5 V

Vo=2.1 V

Vo=1.8 V

Vo=1.5 V

Vo=1.2 V

4.21 A

3.26 A

2.77 A

2.43 A

2.04 A

1.69 A

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

1.2 Vdc - 3.3 Vdc / 6 A Output

Input Specifications (continued)

Parameter

Min

Typ

Max

Notes

Input Current (no load)

100 mA

Remote Off Input Current

5 mA

Input Reflected Ripple Current

(pk-pk)

Tested with simulated source impedance

of 1uH, 5 Hz to 20 MHz, a 1000 uF/16 V

electrolytic capacitor, a 220 uF/10 V

Tantalum capacitor and 2.2 uF/50 V

ceramic capacitor at the input.

60 mA

Input Reflected Ripple Current

(rms)

20 mA

I²t Inrush Current Transient

Turn-on Voltage Threshold

Turn-off Voltage Threshold

0.04 A²s

2.7 V

2.6 V

3.0 V

1.8 V

Note: All specifications are typical at 25 °C unless otherwise stated.

Output Specifications

Parameter

Min

Typ

Max

Notes

Output Voltage Set Point

-2% Vo,set

2% Vo,set

Vin=5 V, 50% full load

Output Voltage Set Point

Over all operating input voltages,

resistive loads

-3% Vo,set

3% Vo,set

(-40 °C - 85 °C)

Load Regulation

0.4% Vo,set

Io=Io, min to 50% Io, max

Vin=Vin, min to Vin, max

Tref=Tamin to Tamax

Line Regulation

0.3% Vo,set

Temperature Regulation

Output Current

0.4% Vo, set

0 A

7 A

6 A

18 A

Current Limit Threshold

0.64 A²s

Short Circuit Surge Transient

Tested with 0-20 MHz, with external

10 uF/10 V Tantalum capacitor, 220

uF/10 V Tantalum and 2.2 uF/50 V

ceramic capacitor at the output.

Ripple and Noise (pk-pk)

Ripple and Noise (rms)

30 mV

10 mV

50 mV

20 mV

Turn on Time

4 mS

8 mS

3% Vo

Overshoot at Turn on

External Load Capacitance

Transient Response

100 uF/A

Test conditions:

50% ~ 100% Max Load

Settling Time

100 mV

di/dt=0.1 A/uS; Vin=5 V; with

external 10 uF/10 V Tantalum

capacitor, 220 uF/10 V Tantalum

capacitor and 2.2 uF/50 V

ceramic capacitor at the output.

40 uS

100 mV

40 uS

VO =1.2 -3.3 V

100% ~ 50% Max Load

Settling Time

Note: All specifications are typical at nominal input (Vin=5 V), full load at 25 °C unless otherwise stated.

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

1.2 Vdc - 3.3 Vdc / 6 A Output

General Specifications

Parameter

Min

Typ

Max

Notes

Efficiency (Current Source)

Vo=3.3 V

94%

92%

91%

89%

88%

Vo=2.5 V

Vo=2.1 V

Vo=1.8 V

Vo=1.5 V

Vo=1.2 V

Measured at Vin=5 V, full load

85%

Switching Frequency

250 kHz

300 kHz

350 kHz

Output Voltage Trim Range

Remote Sense Compensation

90% Vo

110% Vo

10% Vo

Calculated Per Bell Core SR-332 (IO

=80%load; Ta = 25 °C)

MTBF

6,929,838 hours

Dimensions

Inches (L × W × H)

Millimeters (L × W × H)

Weight

2.0 x 0.55 x 0.36

50.80 x 13.97 x 9.14

7.5 g

Note: All specifications are typical at 25 °C unless otherwise stated.

Control Specifications

Parameter

Min

Typ

Max

Notes

Remote On/Off

Signal Low (Unit Off)

Signal High (Unit On)

Signal Low (Unit On)

Signal High (Unit Off)

Power Good Levels

-0.2 V

0.3 V

Vin, max

0.5 V

xRPB-06Fxx0; Active High; Remote On/Off pin

open, Unit on.

-0.2 V

4.5 V

xRPB-06FxxL & xRPB-06FxxW; Active Low;

Remote On/Off pin open, Unit on.

5.5 V

High Level

Low Level

2.1 V

1.05 V

Output Trim Equations

Equation for calculating the trim resistor (in kΩ) given the desired adjusted voltage (Vup) is shown below. The

Trim resistor should be connected between the Trim pin and Ground.

Vout

2.1264

R_trim−up

−1

Module

V_up−V_o

Trim

Rtrim-up

GND

Equation for calculating the trim resistor (in kΩ) given the desired adjusted voltage (Vdown) is shown below. The

Trim resistor should be connected between the Trim pin and Vout.

Vout

Rtrim-down

(V_down− 0.96)⋅ 2.215

Module

R_trim−down= [

]−1

Trim

GND

V_o−V_down

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

1.2 Vdc - 3.3 Vdc / 6 A Output

Efficiency Data

2.5 V Module

3.3 V Module

95.0%

90.0%

85.0%

80.0%

75.0%

70.0%

65.0%

60.0%

100.0%

95.0%

90.0%

85.0%

80.0%

75.0%

70.0%

65.0%

60.0%

4.5 V

5.0 V

5.5 V

4.5 V

5.0 V

5.5 V

0.6 A

1.5 A

3.0 A

4.5 A

6.0 A

0.6 A

1.5 A

3.0 A

4.5 A

6.0 A

Output Current

2.1 V Module

1.8 V Module

100.0%

95.0%

90.0%

85.0%

80.0%

75.0%

70.0%

65.0%

60.0%

95.0%

90.0%

85.0%

80.0%

75.0%

70.0%

65.0%

60.0%

3.0 V

5.0 V

5.5 V

3.0 V

5.0 V

5.5 V

0.6 A

1.5 A

3.0 A 4.5 A

6.0 A

0.6 A

1.5 A

3.0 A

4.5 A

6.0 A

Output Current

1.5 V Module

1.2 V Module

100.0%

95.0%

90.0%

85.0%

80.0%

75.0%

70.0%

65.0%

60.0%

95.0%

90.0%

85.0%

80.0%

75.0%

70.0%

65.0%

60.0%

3.0 V

5.0 V

5.5 V

3.0 V

5.0 V

5.5 V

0.6 A

1.5 A

3.0 A

4.5 A

6.0 A

0.6 A

1.5 A

3.0 A

4.5 A

6.0 A

Output Current

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

1.2 Vdc - 3.3 Vdc / 6 A Output

Thermal Derating Curves

Vin=5 V, Vout=3.3 V

Vin=5 V, Vout=1.8 V

Vin=5 V, Vout=1.2 V

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

1.2 Vdc - 3.3 Vdc / 6 A Output

Ripple and Noise Waveforms

Ripple and noise at full load Vo=1.2 V

Ripple and noise at full load Vo=1.5 V

Ripple and noise at full load Vo=1.8 V

Ripple and noise at full load Vo=2.1 V

Ripple and noise at full load Vo=2.5 V

Ripple and noise at full load Vo=3.3 V

Note: Ripple and Noise at 5.0 Vdc input, 0-20 MHz BW, with a 220 uF/10 V and a 10 uF/10 V tantalum cap at

the output, Ta=25 deg C.

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

1.2 Vdc - 3.3 Vdc / 6 A Output

Transient Response Waveforms

Transients 50% to 100% load 1.2 Vdc output

Transients 50% to 100% load 1.5 Vdc output

Transients 50% to 100% load 1.8 Vdc output

Transients 100% to 50% load 1.2 Vdc output

Transients 100% to 50% load 1.5 Vdc output

Transients 100% to 50% load 1.8 Vdc output

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

1.2 Vdc - 3.3 Vdc / 6 A Output

Transient Response Waveforms (continued)

Transients 50% to 100% load 2.1 Vdc output

Transients 100% to 50% load 2.1 Vdc output

Transients 100% to 50% load 2.5 Vdc output

Transients 100% to 50% load 3.3 Vdc output

Transients 50% to 100% load 2.5 Vdc output

Transients 50% to 100% load 3.3 Vdc output

Note: Transient Response at 5.0 V input, di/dt=0.1 A/uS, with a 220 uF/10 V tantalum cap, a 10 uF/10 V

tantalum cap, and a 2.2 uF/50 V ceramic cap at the output, Ta=25 deg C.

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

1.2 Vdc - 3.3 Vdc / 6 A Output

Mechanical Outline

VRPB-06Fxxx

Pin Connections

Function

+Vout

Remote Sense

+Vout

Ground

+Vin

Power Good

Trim

Remote On/Off

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com

NON-ISOLATED DC/DC CONVERTERS

3.0 Vdc - 5.5 Vdc Input

Mechanical Outline

0RPB-06Fxxx

1.2 Vdc - 3.3 Vdc / 6 A Outputt

Pin Connections

Function

+Vout

Remote Sense

+Vout

Ground

+Vin

Power Good

Trim

Remote On/Off

RoHS Compliance

Complies with the European Directive 2002/95/EC, calling for the elimination of lead and

other hazardous substances from electronic products.

CORPORATE

FAR EAST

EUROPE

Bel Fuse Inc.

Bel Fuse Ltd.

Bel Fuse Europe Ltd.

206 Van Vorst Street

Jersey City, NJ 07302

Tel 201-432-0463

Fax 201-432-9542

www.belfuse.com

8F/ 8 Luk Hop Street

San Po Kong

Kowloon, Hong Kong

Tel 852-2328-5515

Fax 852-2352-3706

www.belfuse.com

Preston Technology Management Centre

Marsh Lane, Suite G7, Preston

Lancashire, PR1 8UD, U.K.

Tel 44-1772-556601

Fax 44-1772-888366

www.belfuse.com

V7PB-06F18L [BEL]

相关型号：

V7PB-06F1A0

V7PB-06F1A0G

V7PB-06F1AL

V7PB-06F1AW

V7PB-06F1AWG

V7PB-10A

V7PB-10A10L

V7PB-10A10S

V7PB-10A12L

V7PB-10A12S

V7PB-10A15L

V7PB-10A15S