VWS10028-3V [BEL]
DC-DC Regulated Power Supply Module, 1 Output, 100W, Hybrid;型号: | VWS10028-3V |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 100W, Hybrid |
文件: | 总3页 (文件大小:83K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VWS100 DC-DC Series Data Sheet
Single-Output, 100 Watts
Features
• 100W full brick
• Industry-standard footprint
• Fixed frequency
• 85°C case operation
• 6-sided shielding
• Superior transient response
• 1500V isolation
• Optional booster module
Description
VWS DC-DC converters are direct replacement converters for industry-standard full bricks. Featuring a fixed-
frequency design, the VWS offers excellent transient response and predictable EMI performance. The VWS can
be combined with VWB booster modules to provide increased power. VWS converters use 100% surface-mount
construction, along with planar magnetics, and are fully compatible with production board-washing processes.
Technical Specifications
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
18 - 36 VDC
36 - 72 VDC
Input Reflected Ripple Current
Undervoltage Lockout - Turn On / Turn Off
50 mA Pk-Pk
35 VDC / 32 VDC
Output
Setpoint Accuracy
±1%
0.2% Vout
0.5% Vout
0.5 VDC
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Remote Sense Headroom
Minimum Output Current
Efficiency vs. Load (48V Input)
10 % I Rated
95
90
85
80
75
70
65
60
out
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
Current Limit Type
Current Limit Threshold Range, % of Iout Rated
Short Circuit Threshold Range, % of Iout Rated
OVP Trip Range
25% Iout
8% Vout
500 µs
±10%
Hiccup
VWS100ZH
EFF. (36v)
110 - 140%
200%
120 - 140% Vout Nom.
Self-Recovering
EFF. (48v)
EFF. (75v)
OVP/UVP type
10
20
30
40
50
60
70
80
90
100
General
LOAD %
Turn-On Time
10 mS
Remote Shutdown
Positive Or Negative Logic
Remote Shutdown Reference
Switching Frequency
Isolation, Input - Output
Isolation, Input - Case
Isolation, Output - Case
Temperature Coefficient
Case Temperature
V
Negative
300 kHz
1500 VDC
1050 VDC
500 VDC
0.2%/°C
in
Notes
†
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Operating Range
Storage Range
-25 To +85°C
-55 To +115°C
90 To 100°C
5 g, 10 - 55 Hz
2.1 x 10 hrs
Thermal Shutdown Range
Vibration, 3 Axes, 5 Min Each
Safety: Agency approvals may vary from model to model. Please consult
factory for specific model information.
6
†
MTBF (Bellcore TR-NWT-000332)
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
Safety
Weight (approx.)
UL, cUL, TUV
6.0 oz
REV. APR 16, 2004
Page 1 of 3
VWS100 DC-DC Series Data Sheet
Single-Output, 100 Watts
Model Selection
INPUT VOLTAGE
INPUT VOLTAGE
RANGE (VOLTS)
MAXIMUM INPUT
CURRENT (AMPS)*
OUTPUT
VOLTAGE (VOLTS)
RATED OUTPUT
CURRENT (AMPS)
RIPPLE & NOISE
pk-pk (mV)
TYPICAL
EFFICIENCY**
MODEL
(VOLTS)
VWS100YH ◆
VWS100YJ
VWS100YK
VWS10028 ◆
VWS100YL ◆
VWS100ZG ◆
VWS100ZH
VWS100ZJ ◆
VWS100ZK
24
24
24
24
24
48
48
48
18-36
18-36
18-36
18-36
18-36
36-72
36-72
36-72
36-72
36-72
7.0
7.0
7.0
7.0
7.0
3.5
3.5
3.5
3.5
3.5
12
15
24
28
48
5
12
15
24
28
8.3
6.7
4.2
3.6
2.1
20.0
8.3
6.7
4.2
3.6
120
150
200
200
200
50
120
150
200
200
84%
85%
87%
90%
90%
84%
89%
89%
88%
90%
48
48
VWS100Z28 ◆
NOTES:
◆
Advanced product release - consult factory.
*
Maximum input current at minimum input voltage, maximum rated output power.
** At nominal V , rated output.
in
Model numbers highlighted in yellow or shaded are not recommended for new designs.
Mechanical Drawing
Pin
Function
Thermal Impedance
Tolerances
(Millimeters)
Natural Convection
100 LFM
200 LFM
300 LFM
400 LFM
5.5 °C/W
1
-V
in
Gate OUT
Gate IN
Inches:
.XX ± 0.020
.XXX ± 0.010
4.6 °C/W
3.6 °C/W
2.4 °C/W
2.0 °C/W
2
3
4
.X ± 0.5
.XX ± 0.25
+V
in
Pin:
± 0.002
5
-V
out
± 0.05
6
7
8
9
-Sense
Trim
+Sense
Note:
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated
for specific application.
(Dimensions as listed unless otherwise
specified.)
+V
out
REV. APR 16, 2004
Page 2 of 3
OPTIONS
This page is offered as a reference. Consult factory for actual availability of options. When ordering
equipment options, use the following suffix information. Select preferred option(s) and add the suffix to the
model number. Ordering option examples are located below the options table.
OPTION
SUFFIX
APPLICABLE SERIES
REMARKS
Negative Logic
N
HAS, HBD, HBS, HES, HLS, HLD, LES,
QBS, QES, QLS, TES, TQD
TTL "Low" Turns Module ON
TTL "High" Turns Module OFF
Lucent-Compatible Trim
T
HAS, HBD, HBS, HES, HLS, QBS, QES,
QLS
Trim
1
2
3
IAS, LES
Enable
IAD, IAS, LES, SMS
IAS, LES
Trim and Enable
Pin Length and Heatsink Options
0.110" (2.8mm) Pin Length
Standard Pin Length is 0.180" (4.6mm)
8
9
All Leaded Models
All Leaded Models
0.150" (3.8mm) Pin Length
0.24" (6.1mm) Horizontal Heatsink
1H
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
0.24" (6.1mm) Vertical Heatsink
0.45" (11.4mm) Horizontal Heatsink
0.45" (11.4mm) Vertical Heatsink
0.95" (24.1mm) Horizontal Heatsink
0.95" (24.1mm) Vertical Heatsink
1V
2H
2V
3H
3V
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks
(Except HLS, HLD, QLS, TLD, and TKD Packages)
Example Options:
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent-compatible trim, and 0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent-compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president
of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
REV. APR 16, 2004
Page 3 of 3
相关型号:
©2020 ICPDF网 联系我们和版权申明