HLMP-335X-0B01 [BOARDCOM]
T-13/4 (5 mm) Low Profile LED Lamps;型号: | HLMP-335X-0B01 |
厂家: | Broadcom Corporation. |
描述: | T-13/4 (5 mm) Low Profile LED Lamps |
文件: | 总9页 (文件大小:340K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HLMP-3351, HLMP-3366, HLMP-3451,
HLMP-3466, HLMP-3554, HLMP-3568
3
T-1 / (5 mm) Low Profile LED Lamps
4
Data Sheet
Description
Features
The HLMP-335x/-336x Series are Gallium Arsenide • High intensity
Phosphide on Gallium Phosphide High Efficiency Red
Light Emitting Diodes.
• Low profile: 5.8 mm (0.23in.) nominal
3
• T-1 / diameter package
4
The HLMP-345x/-346x Series are Gallium Arsenide
Phosphide on Gallium Phosphide Yellow Light Emitting
Diodes.
• Diffused and non-diffused types
• General purpose leads
• IC compatible/low current requirements
• Reliable and rugged
The HLMP-355x/-356x Series are Gallium Phosphide Green
Light Emitting Diodes.
3
The Low Profile T-1 / package provides space savings
4
and is excellent for backlighting applications.
Package Dimensions
Selection Guide
Luminous Intensity Iv (mcd)
Part Number
HLMP-
1/2[1]
Color
Package Description
2q
Min.
5.4
Max.
Red
T-13/4 Tinted, diffused
50
3351
-
3351-D00xx
3351-F00xx
3366
2.1
-
5.4
-
T-13/4 Tinted, non-diffused
T-13/4 Tinted, diffused
45
50
13.8
13.8
3.6
-
3366-H00xx
3451
-
Yellow
Green
-
3451-D00xx
3451-EFBxx
3451-F00xx
3466
3.6
-
5.7
18.4
9.2
-
-
-
-
-
-
-
T-13/4 Tinted, non-diffused
T-13/4 Tinted, diffused
45
50
40
9.2
3466-F00xx
3554
9.2
6.7
3554-E00xx
3568
6.7
T-13/4 Tinted, non-diffused
10.6
10.6
3568-F00xx
Part Numbering System
HLMP - 3 x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
R1: Tape & Reel, Counterclockwise
Color Bin Options
0: Full Color Bin Distribution
B: Color Bin 2 & 3 only
Maximum Iv Bin Options
0: Open (No. max. limit)
Others: Please Refer to the Iv Bin Table
Minimum Iv Bin Options
Please Refer to the Iv Bin Table
Lens Options
5x: Tinted, Diffused
6x: Tinted, Nondiffused
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
Package Options
3: T-1 3/4 (5 mm)
2
Absolute Maximum Ratings at T = 25°C
A
Parameter
3350 Series
3450 Series
3550 Series
Units
mA
mA
mA
mW
V
Peak Forward Current
90
60
90
Average Forward Current[1]
DC Current[2]
25
20
25
30
20
30
Power Dissipation[3]
135
85
135
Reverse Voltage (IR = 100 μA)
Transient Forward Current[4] (10 μs Pulse)
Operating Temperature Range
Storage Temperature Range
5
5
5
500
500
500
mA
°C
-40 to +100
-40 to +100
-40 to +100
-40 to +100
250°C for 3 seconds
-20 to +100
-40 to +100
Wave Soldering Temperature
[1.59 mm (0.063 in.) from Body]
Solder Dipping Temperature
260°C for 5 seconds
[1.59 mm (0.063 in.) from Body]
Notes:
1. See Figure 10 (High Efficiency Red), 15 (Yellow), or 20 (Green) to establish pulsed operating conditions.
2. For High Efficiency Red and Green Series, derate linearly from 50°C at 0.5 mA/°C. For Red and Yellow Series, derate linearly from 50°C at
0.2 mA/°C.
3. For High Efficiency Red and Green Series, derate power linearly from 25°C at 1.8 mW/°C. For Red and Yellow Series, derate power linearly from 50°C
at 1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and
wirebond. It is not recommended that the device be operated at peak current beyond the peak forward current listed in the Absolute Maximum
Ratings.
1.0
HIGH
EFFICIENCY
RED
T = 25°C
A
RED
0.5
GREEN
YELLOW
500
550
600
650
700
750
WAVELENGTH – nm
Figure 1. Relative intensity vs. wavelength.
3
High Efficiency Red HLMP-335x/-336x Series
Electrical Specifications at T = 25°C
A
Device
HLMP-
Symbol
Description
Min.
Typ.
Max.
Units
Test Conditions
2q1/2
Including Angle Between
Half Luminous Intensity
Points
3366
50
50
45
45
Deg.
Note 1
(Figure 11)
λPEAK
Peak Wavelength
635
nm
Measurement at
Peak (Figure 1)
λd
Dominant Wavelength
Spectral Line Halfwidth
Speed of Response
Capacitance
626
40
nm
nm
ns
Note 2
Δλ1/2
τs
90
C
11
pF
VF = 0; f = 1 MHz
RqJ-PIN
Thermal Resistance
260
°C/W
Junction to
Cathode Lead
VF
Forward Voltage
1.9
2.4
V
IF = 10 mA
(Figure 7)
VR
Reverse Breakdown Voltage
Luminous Efficacy
5.0
V
IR = 100 μA
ηV
145
lm/W
Note 3
Notes:
1
1. q / is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2
2. Dominant wavelength, λ , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
d
device.
3. Radiant Intensity, I , in watts/steradian may be found from the equation I = I /η , where I is the luminous intensity in candelas and η is the
e
e
v
v
v
v
luminous efficacy in lumens/watt.
60
50
40
30
20
10
0
1.0
1.5
V
2.0
2.5
3.0
3.5
4.0
– FORWARD VOLTAGE – V
F
Figure 7. Forward current vs. forward voltage.
Figure 8. Relative luminous intensity vs. forward
current.
Figure 9. Relative efficiency (luminous intensity
per unit current) vs. peak current.
4
Figure 10. Maximum tolerable peak current vs. pulse duration.
(IDC MAX as per MAX ratings).
Figure 11. Relative luminous intensity vs. angular displacement.
Yellow HLMP-345x/-346x Series
Electrical Specifications at T = 25°C
A
Device
HLMP-
Symbol
Description
Min.
Typ.
Max.
Units
Test Conditions
2q1/2
Including Angle Between
Half Luminous Intensity
Points
3466
50
50
45
45
Deg.
Note 1
(Figure 16)
λPEAK
Peak Wavelength
583
nm
Measurement at
Peak (Figure 1)
λd
Dominant Wavelength
Spectral Line Halfwidth
Speed of Response
Capacitance
585
36
nm
nm
ns
Note 2
Δλ1/2
τs
90
C
15
pF
VF = 0; f = 1 MHz
RqJ-PIN
Thermal Resistance
260
°C/W
Junction to
Cathode Lead
VF
Forward Voltage
2.0
2.4
V
IF = 10 mA
(Figure 12)
VR
Reverse Breakdown Voltage
Luminous Efficacy
5.0
V
IR = 100 μA
ηV
500
lm/W
Note 3
Notes:
1
1. q / is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2
2. Dominant wavelength, λ , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
d
device.
3. Radiant Intensity, I , in watts/steradian may be found from the equation I = I /η , where I is the luminous intensity in candelas and η is the
e
e
v
v
v
v
luminous efficacy in lumens/watt.
5
60
50
40
30
20
10
0
1.0
1.5
V
2.0
2.5
3.0
3.5
4.0
– FORWARD VOLTAGE – V
F
Figure 12. Forward current vs. forward voltage.
Figure 13. Relative luminous intensity vs.
forward current.
Figure 14. Relative efficiency (luminous intensity
per unit current) vs. peak current.
Figure 15. Maximum tolerable peak current vs.
pulse duration. (IDC MAX as per MAX ratings).
Figure 16. Relative luminous intensity vs. angular displacement.
6
Green HLMP-355x/-356x Series
Electrical Specifications at T = 25°C
A
Device
HLMP-
Symbol
Description
Min.
Typ.
Max.
Units
Test Conditions
2q1/2
Including Angle Between
Half Luminous Intensity
Points
3554
3568
50
40
Deg.
Note 1
(Figure 21)
λPEAK
Peak Wavelength
565
nm
Measurement at
Peak (Figure 1)
λd
Dominant Wavelength
Spectral Line Halfwidth
Speed of Response
Capacitance
569
28
nm
nm
ns
Note 2
Δλ1/2
τs
500
18
C
pF
VF = 0; f = 1 MHz
RqJ-PIN
Thermal Resistance
260
°C/W
Junction to
Cathode Lead
VF
Forward Voltage
2.1
2.7
V
IF = 10 mA
(Figure 17)
VR
Reverse Breakdown Voltage
Luminous Efficacy
5.0
V
IR = 100 μA
ηV
595
lm/W
Note 3
Notes:
1
1. q / is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2
2. Dominant wavelength, λ , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
d
device.
3. Radiant Intensity, I , in watts/steradian may be found from the equation I = I /η , where I is the luminous intensity in candelas and η is the
e
e
v
v
v
v
luminous efficacy in lumens/watt.
Figure 17. Forward current vs. forward voltage.
Figure 18. Relative luminous intensity vs.
forward current.
Figure 19. Relative efficiency (luminous intensity
per unit current) vs. peak current.
7
Figure 20. Maximum tolerable peak current vs.
pulse duration. (IDC MAX as per MAX ratings).
Figure 21. Relative luminous intensity vs. angular displacement.
Intensity Bin Limits
Intensity Range (mcd)
Min. Max.
Intensity Range (mcd)
Min. Max.
Color
Bin
D
E
Color
Bin
D
E
Red
Yellow
2.4
3.8
4.0
6.5
3.8
6.1
6.5
10.3
F
6.1
9.7
F
10.3
16.6
G
H
I
9.7
15.5
G
H
I
16.6
26.5
15.5
24.8
26.5
42.3
24.8
39.6
42.3
67.7
J
39.6
63.4
J
67.7
108.2
173.2
250.0
360.0
510.0
800.0
1250.0
1800.0
2900.0
4700.0
7200.0
11700.0
18000.0
27000.0
K
63.4
101.5
162.4
234.6
340.0
540.0
850.0
1200.0
1700.0
2400.0
3400.0
4900.0
7100.0
10200.0
14800.0
21400.0
30900.0
K
108.2
173.2
250.0
360.0
510.0
800.0
1250.0
1800.0
2900.0
4700.0
7200.0
11700.0
18000.0
L
101.5
162.4
234.6
340.0
540.0
850.0
1200.0
1700.0
2400.0
3400.0
4900.0
7100.0
10200.0
14800.0
21400.0
L
M
N
O
P
M
N
O
P
Q
R
Q
R
S
S
T
T
U
V
W
X
Y
U
V
W
Z
Maximum tolerance for each bin limit is 18ꢀ.
8
Intensity Bin Limits, continued
Color Categories
Lambda (nm)
Min.
Intensity Range (mcd)
Color
Cat#
Max.
564.5
567.5
570.5
573.5
576.5
584.5
587.0
589.5
592.0
593.0
Color
Bin
E
Min.
Max.
Green
6
5
4
3
2
1
3
2
4
5
561.5
564.5
567.5
570.5
573.5
582.0
584.5
587.0
589.5
592.0
Green
7.6
12.0
F
12.0
19.1
G
H
I
19.1
30.7
30.7
49.1
49.1
78.5
Yellow
J
78.5
125.7
201.1
289.0
417.0
680.0
1100.0
1800.0
2700.0
4300.0
6800.0
10800.0
16000.0
25000.0
40000.0
K
125.7
201.1
289.0
417.0
680.0
1100.0
1800.0
2700.0
4300.0
6800.0
10800.0
16000.0
25000.0
L
M
N
O
P
Maximum tolerance for each bin limit is 0.5 nm.
Q
R
S
T
U
V
W
Maximum tolerance for each bin limit is 18ꢀ.
Mechanical Option Matrix
Mechanical Option Code
Definition
00
01
02
Bulk Packaging, minimum increment 500 pcs/bag
Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
Tape & Reel, straight leads, minimum increment 1300 pcs/bag
Tape & Reel, crimped leads, reeled counterclockwise, anode leaves first
R1
Note:
Allcategoriesareestablishedforclassificationofproducts. Productsmaynotbeavailableinallcategories. PleasecontactyourlocalAvagorepresentative
for further clarification/information.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved.
AV02-1559EN - October 13, 2008
相关型号:
HLMP-3365-OPTION-002
Single Color LED, High Efficiency Red, Red Tinted Nondiffused, T-1 3/4, 5mm
AVAGO
©2020 ICPDF网 联系我们和版权申明