HLMX-36810BA1 [BOARDCOM]
Tâ13/4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps;型号: | HLMX-36810BA1 |
厂家: | Broadcom Corporation. |
描述: | Tâ13/4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps |
文件: | 总8页 (文件大小:230K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621
HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601
HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
3
T‑1 / (5 mm), T‑1 (3 mm), 5 Volt, 12 Volt,
4
Integrated Resistor LED Lamps
Data Sheet
Description
Features
The 5 volt and 12 volt series lamps contain an integral
current limiting resistor in series with the LED. This allows
the lamp to be driven from a 5 volt/12 volt source without
an external current limiter. The red LEDs are made from
GaAsP on a GaAs substrate. The High Efficiency Red and
Yellow devices use GaAsP on a GaP substrate.
• Integral current limiting resistor
• TTL compatible
Requires no external current Limiter with 5 volt/12 volt
supply
• Cost effective
Saves space and resistor cost
The green devices use GaP on a GaP substrate.The diffused
lamps provide a wide off-axis viewing angle.
• Wide viewing angle
• Available in all colors
3
The T-1 / lamps are provided with sturdy leads suitable
4
Red, High Efficiency Red, Yellow, and High Performance
Green in T-1 and T-13/4packages
3
for wire wrap applications. The T-1 / lamps may be front
4
panel mounted by using the HLMP-0103 clip and ring.
Package Dimensions
1.14 (.045)
0.51 (.020)
5.08 (0.200)
4.57 (0.180)
2.79 (.110)
2.29 (.090)
24.1(.95) MIN.
1.52 (.060)
1.02 (.040)
3.43 (.135)
2.92 (.115)
0.65 (0.026) max.
9.19 (0.362)
8.43 (0.332)
0.89 (0.035)
0.64 (0.025)
12.34 (0.486)
11.54 (0.454)
3.17 (.125)
2.67 (.105)
Ø
(0.022) 0.55
(0.016) 0.40
SQ. TYP.
4.70 (.185)
4.19 (.165)
1.32 (0.052)
1.02 (0.040)
6.35 (.250)
5.58 (.220)
23.0
(0.90)
MIN.
Figure A. T-1 package.
0.46 (0.018)
SQUARE NOMINAL
Notes:
1. All dimensions are in mm (inches).
2. An epoxy meniscus may extend about 1 mm (0.040") down the leads.
3. For PCB hole recommendations, see the Precautions section.
1.27 (0.050)
NOM.
6.1 (0.240)
5.6 (0.220)
CATHODE
2.54 (0.100)
NOM.
Figure B. T-13/4 package.
Selection Guide
Luminous Intensity
Iv (mcd)
Package
Outline
Operating
Voltage (V)
Part Number
HLMP-
[1]
1/2
Color
Package Description
2q
Min.
2.1
2.1
2.1
2.1
8.6
2.1
2.1
2.1
2.1
2.2
2.2
2.2
3.4
2.2
2.2
2.2
2.2
2.2
2.2
1.6
1.6
1.6
4.2
1.6
1.6
1.6
1.6
1.6
1.6
Max.
Red
T-1 Tinted Diffused
A
60
5
1600
-
1600-D00xx
1601
-
60
12
-
1601-D00xx
1601-GH0xx
3600
-
27.6
T-1 3/4 Tinted Diffused
T-1 Tinted Diffused
B
60
60
60
5
-
3600-D00xx
3601
-
12
5
-
3601-D00xx
1620
-
Yellow
A
-
1620-C00xx
1620-C0Bxx
1620-EFBxx
1621
-
-
10.8
60
60
60
60
12
5
-
1621-C00xx
3650
-
T-1 3/4 Tinted Diffused
T-1 Tinted Diffused
B
-
3650-C00xx
3651
-
12
5
-
3651-C00xx
1640
-
Green
A
-
1640-B00xx
1640-B0Dxx
1640-DE0xx
1641
-
-
13.4
-
60
60
60
12
5
1641-B00xx
3680
T-1 3/4 Tinted Diffused
B
-
-
-
-
3680-B00xx
3681
12
3681-B00xx
Note:
1. q is the off-axis angle at which the luminous intensity is 1/2 the axial luminous intensity.
1/2
2
Part Numbering System
HLMX-X 6 X
X
X
X
X
XX
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
A1,B1: Right Angle Housing, Uneven Leads
A2,B2: Right Angle Housing, Even Leads
Color Bin Options
0: Full color bin distribution
B: Color bin 2&3 only
D: Color bin 4&5 only
Maximum Iv Bin Options
0: Open (No. max. limit)
Others: Please refer to the Iv bin Table
Minimum Iv Bin Options
Please refer to the Iv bin Table
Operating Voltage
0: 5 V
1: 12 V
Color Options
0: GaP HER
2,5: GaP Yellow
4,8: GaP Green
Package Options
3
3: T-1 / (5 mm)
4
1: T-1 (3 mm)
Absolute Maximum Ratings at T = 25°C
A
Red/HER/Yellow
5 Volt Lamps
Red/HER/Yellow
12 Volt Lamps
Green
5 Volt Lamps
Green
12 Volt Lamps
DC Forward Voltage (TA = 25°C)
Reverse Voltage (IR = 100 μA)
Operating Temperature Range
7.5 Volts[2]
15 Volts[3]
7.5 Volts[2]
15 Volts[3]
5 Volts
5 Volts
5 Volts
5 Volts
-40°C to 85°C
-40°C to 100°C
-40°C to 85°C
-40°C to 100°C
-20°C to 85°C
-40°C to 100°C
-20°C to 85°C
-40°C to 100°C
Storage Temperature Range
Notes:
2. Derate from T = 50°C at 0.071 V/°C, see Figure 3.
A
3. Derate from T = 50°C at 0.086 V/°C, see Figure 4.
A
3
Electrical/Optical Characteristics at T = 25°C
A
High Efficiency Red
Yellow
Green
Max. Min. Typ.
565
Symbol Description
Min. Typ.
Max. Min. Typ.
Max. Unit
Test Condition
lP
Peak
Wavelength
635
583
nm
ld
Dominant
Wavelength
626
40
585
36
569
28
nm
Note 4
Dl1/2
Spectral Line
Halfwidth
nm
RqJ-PIN Thermal
290
290
290
°C/W
Junction to
Cathode Lead
(Note 6)
Resistance
RqJ-PIN Thermal
210
210
210
°C/W
Junction to
Cathode Lead
(Note 7)
Resistance
IF
Forward Current
12 V Devices
13
20
15
13
20
15
13
20
15
mA
mA
VF = 12 V
IF
Forward Current
5 V Devices
10
145
10
10
VF = 5 V
hV
VR
Luminous
Efficacy
500
595
lumen
/Watt
Note 2
Reverse
5.0
5.0
5.0
V
IR = 100 μA
Breakdown
Voltage
Notes:
4. The dominant wavelength, l , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
d
device.
5. Radiant intensity, I , in watts/steradian, may be found from the equation I = l /h , where l is the luminous intensity in candelas and h is the
e
e
V
V
V
V
luminous efficacy in lumens/Watt.
6. For Figure A package type.
7. For Figure B package type.
4
24
20
16
12
8
24
20
16
12
8
4
4
0
0
0
2
4
6
8
7.5
10 12 14 16
15
0
2
4
6
8
7.5
10 12 14 16
15
V
– APPLIED FORWARD VOLTAGE – V
V – APPLIED FORWARD VOLTAGE – V
CC
CC
Figure 1. Forward current vs. applied forward voltage. 5 volt devices.
Figure 2. Forward current vs. applied forward voltage. 12 volt devices.
8
7.5
16
15
6
4
2
0
12
8
4
0
0
20
40
60
80 85
0
20
40
60
80 85
T – AMBIENT TEMPERATURE – C
T – AMBIENT TEMPERATURE – C
A
A
Figure 3. Maximum allowed applied forward voltage vs.
ambient temperature RqJA = 175°C/W. 5 volt devices.
Figure 4. Maximum allowed applied forward voltage vs.
ambient temperature RqJA = 175°C/W. 12 volt devices.
0
0
10
10
1.0
0.8
0.6
0.4
0.2
20
20
1.0
0.8
30
30
40
40
50
50
0.6
0.4
0.2
60
60
70
70
80
90
80
90
10 20 30 40 50 60 70 80 90 100
10 20 30 40 50 60 70 80 90 100
Figure 5. Relative luminous intensity vs. angular displacement for T-1
package.
Figure 6. Relative luminous intensity vs. angular displacement for T-13/4
package.
5
2.5
2.0
1.5
1.0
0.5
0
1.5
1.0
0.5
0
GaAsP
GaAsP
2
HIGH EFFICIENCY
HIGH EFFICIENCY
RED, YELLOW, GREEN
RED, YELLOW, GREEN
0
2
4
6
8
10
0
4
6
8
10 12 14 16 18 20
5 VOLT DEVICES
12 VOLT DEVICES
Figure 7. Relative luminous intensity vs. applied forward voltage. 5 volt
devices.
Figure 8. Relative luminous intensity vs. applied forward voltage. 12 volt
devices.
Intensity Bin Limit
Intensity Bin Limit (Con't)
Intensity Range (mcd)
Intensity Range (mcd)
Color
Bin
Color
Bin
Min.
Max.
Min.
Max.
Red
D
E
2.4
3.8
Yellow
C
D
E
2.5
4.0
3.8
6.1
4.0
6.5
F
6.1
9.7
6.5
10.3
G
H
I
9.7
15.5
F
10.3
16.6
15.5
24.8
G
H
I
16.6
26.5
24.8
39.6
26.5
42.3
J
39.6
63.4
42.3
67.7
K
L
63.4
101.5
162.4
234.6
340.0
540.0
850.0
1200.0
1700.0
2400.0
3400.0
4900.0
7100.0
10200.0
14800.0
21400.0
30900.0
J
67.7
108.2
173.2
250.0
360.0
510.0
800.0
1250.0
1800.0
2900.0
4700.0
7200.0
11700.0
18000.0
27000.0
21400.0
30900.0
101.5
162.4
234.6
340.0
540.0
850.0
1200.0
1700.0
2400.0
3400.0
4900.0
7100.0
10200.0
14800.0
21400.0
K
L
108.2
173.2
250.0
360.0
510.0
800.0
1250.0
1800.0
2900.0
4700.0
7200.0
11700.0
18000.0
14800.0
21400.0
M
N
O
P
Q
R
S
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
T
U
V
W
Y
Z
Maximum tolerance for each bin limit is 18ꢀ.
6
Color Categories
Intensity Bin Limit (Con't)
Lambda (nm)
Min.
Intensity Range (mcd)
Color
Bin
Color
Cat #
Max.
Min.
Max.
Green
6
5
4
3
2
1
3
2
4
5
561.5
564.5
567.5
570.5
573.5
582.0
584.5
587.0
589.5
592.0
564.5
567.5
570.5
573.5
576.5
584.5
587.0
589.5
592.0
593.0
Green
B
C
D
E
1.8
2.9
2.9
4.7
4.7
7.6
7.6
12.0
F
12.0
19.1
G
H
I
19.1
30.7
30.7
49.1
Yellow
49.1
78.5
J
78.5
125.7
201.1
289.0
417.0
680.0
1100.0
1800.0
2700.0
4300.0
6800.0
10800.0
16000.0
25000.0
40000.0
30900.0
K
L
125.7
201.1
289.0
417.0
680.0
1100.0
1800.0
2700.0
4300.0
6800.0
10800.0
16000.0
25000.0
21400.0
Tolerance for each bin limit is 0.5 nm.
M
N
O
P
Q
R
S
T
U
V
W
Z
Mechanical Option Matrix
Mechanical Option Code
Definition
00
01
02
A1
A2
B1
B2
Bulk Packaging, minimum increment 500 pcs/bag
Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
Tape & Reel, straight leads, minimum increment 1300 pcs/bag
T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
T-1, Right Angle Housing, even leads, minimum increment 500 pcs/bag
T-13/4 Angle Housing, uneven lead, minimum increment 500 pcs/bag
T-13/4 Angle Housing, even leads, minimum increment 500 pcs/bag
Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Avago
representative for further clarification/information.
7
Precautions
• Wave soldering parameter must be set and maintained
according to recommended temperature and dwell
time in the solder wave. Customer is advised to
periodically check on the soldering profile to ensure
the soldering profile used is always conforming to
recommended soldering condition.
Lead Forming
• The leads of an LED lamp may be preformed or cut to
length prior to insertion and soldering into PC board.
• If lead forming is required before soldering, care must
be taken to avoid any excessive mechanical stress
induced to LED package. Otherwise, cut the leads
of LED to length after soldering process at room
temperature. The solder joint formed will absorb the
mechanical stress of the lead cutting from traveling to
the LED chip die attach and wirebond.
• If necessary, use fixture to hold the LED component
in proper orientation with respect to the PCB during
soldering process.
• Proper handling is imperative to avoid excessive
thermal stresses to LED components when heated.
Therefore, the soldered PCB must be allowed to cool to
room temperature, 25°C, before handling.
• It is recommended that tooling made to precisely form
and cut the leads to length rather than rely upon hand
operation.
• Special attention must be given to board fabrication,
solder masking, surface plating and lead holes size and
component orientation to assure solderability.
Soldering Conditions
• Care must be taken during PCB assembly and soldering
• Recommended PC board plated through hole sizes for
process to prevent damage to LED component.
LED component leads:
• The closest LED is allowed to solder on board is 1.59
mm below the body (encapsulant epoxy) for those
parts without standoff.
LED Component
Lead Size
Diagonal
Plated Through-
Hole Diameter
Lead size (typ.) 0.45 × 0.45 mm
(0.018 × 0.018 in.)
0.636 mm
(0.025 in)
0.98 to 1.08 mm
(0.039 to 0.043 in)
• Recommended soldering conditions:
Wave
Soldering
Manual Solder
Dipping
Dambar shear- 0.65 mm
off area (max.) (0.026 in)
0.919 mm
(0.036 in)
Lead size (typ.) 0.50 × 0.50 mm
(0.020 × 0.020 in.)
0.707 mm
(0.028 in)
1.05 to 1.15 mm
(0.041 to 0.045 in)
Pre-heat Temperature
Pre-heat Time
105°C Max.
60 sec Max.
250°C Max.
3 sec Max.
–
–
Dambar shear- 0.70 mm
off area (max.) (0.028 in)
Note: Refer to application note AN1027 for more information on
soldering LED components.
0.99 mm
(0.039 in)
Peak Temperature
Dwell Time
260°C Max.
5 sec Max.
Note:s
1. Above conditions refers to measurement with thermocouple
mounted at the bottom of PCB.
2. It is recommended to use only bottom preheaters in order to reduce
thermal stress experienced by LED.
Recommended solder:
Sn63 (Leaded solder alloy)
SAC305 (Lead-free solder alloy)
LAMINAR
HOT AIR KNIFE
TURBULENT WAVE
250
Flux: Rosin ꢀux
Solder bath temperature:
200
150
100
245 °C 5 °C (maximum peak temperature = 250 °C)
Dwell time: 1.5 sec – 3.0 sec (maximum = 3 sec)
Note: Allow for board to be suꢁciently cooled to
room temperature before you exert mechanical force.
50
PREHEAT
0
10
20
30
40
50
60
70
80
90
100
TIME (SECONDS)
Figure 9. Recommended wave soldering profile.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005‑2015 Avago Technologies. All rights reserved.
AV02‑0379EN ‑ May 27, 2015
相关型号:
©2020 ICPDF网 联系我们和版权申明