首页 > IGP-28111J-16

IGP-28111J-16

更新时间：2024-11-08 05:25:02

品牌：BOOKHAM

描述：SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications

PDF下载

中文翻译

PCB计价

概述
数据手册

如果您发现信息不准确，欢迎纠错

IGP-28111J-16 概述

SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications SFP光收发器为2.7GB / s的180公里DWDM应用

IGP-28111J-16 数据手册

通过下载IGP-28111J-16数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载

Data Sheet

SFP Optical Transceivers for 2.7Gb/s 180km

DWDM Applications

IGP-28111J

The Bookham IGP-28111J optical transceiver is a high

performance, cost effective module for serial optical data

communication applications up to 4.25Gb/s. The IGP-28111J

Features:

• 180km (3600ps/nm) transmission compliant to V-16.2

is designed to accept DWDM SONET/SDH (with or without

FEC) and Ethernet protocol traffic for 180km links.

• DWDM SFP MSA compatible

• +4dBm optical power output

• 100GHz channel spacing

The product is designed for single mode fibre and

operate at ITU wavelengths across the C- and L-band.

The modules aid system hardware engineers in implementing

low-cost DWDM solutions, which are protocol transparent. The

“hot pluggable” feature built into every module reduces

manufacturing and inventory costs allowing optical port

upgrades at the customer premises. Built-in remote monitoring

via digital diagnostics allows user access to static and dynamic

data as well as module condition.

• C- and L-Band coverage

• Up to 4.25Gb/s data rate

• High accuracy thermal wavelength management

• Extended APD-based receiver sensitivity

• Typically 880mW power consumption

• Single +3.3V power supply

• 0°C to +70°C operating case temperature range

• Hot Pluggable

The IGP-28111J uses the established Bookham Buried

Heterostructure Directly Modulated Laser (BH DML) packaged

in a compact cooled TOSA. The transmitter has full IEC60825-

1:2001 and CDRH Class I laser safety certification.

The Bookham IGP-28111J module has been extensively tested

utilizing industry standard single mode fibres in order to

ensure compatibility with SONET-grade enterprise, access and

metro systems. Additionally, all Bookham products are UL,

CAN/CSA, FCC, IEC, and CDRH compliant.

• Duplex LC connector

• Enhanced digital diagnostics

• Low EMI

Compliance:

• CDRH & IEC Laser Safety

• FCC Class B EMI

• MIL-STD-883 ESD

• IEC/EN60950 Product Safety

• RoHS compliant

Applications:

• OC-48/STM-16/OTN-1

DWDM Metro/Access Networks

• Ethernet IEEE 802.3ae

• Fibre channel

• Network Edge devices, µMSPP

• Subscriber Loop label

Data Sheet

Absolute Maximum Ratings

Parameter

Symbol

Min

Max

Unit

Storage Temperature

Supply Voltage

T_STG

V_CC

-40

4.0

2.4

3.47

ºC

-0.3

Data AC Voltage

Tx+, Tx-

P_IN

V_PP

Data DC Voltage

-0.5

Optical Input Received Power

dBm

Operating Conditions

Parameter

Symbol

Min

Typical

Max

Unit

Case temperature

Supply Voltage

T_CASE

V_CC

°C

3.13

3.30

265

3.47

418

1.45

100

Supply Current[1]

Module Power Dissipation

In-rush Current[2]

I_CC

0.88

I_IN-RUSH

Notes:

[1] Supply current is shared between V

and V

CCRX.

CCTX

[2] In-rush is defined as current level above steady state current requirements.

Transmitter Operating Specifications – Optical

All specifications relate to End of Life (EOL) values over temperature and supply voltage, unless otherwise stated.

Parameter

Symbol

Value

Units

Notes

Min

0.125

1530

Typical

Max

4.25

1606

Data Rate

2.667

Gb/s

ITU-T Center Wavelength

λ_C

Refer to Table 6 &

Table 7 for details

Center Wavelength (SOL)

λ_SOL

λ_C– 0.05

λ_C– 0.02

λ_C

Where λ_Cis a defined

ITU-T wavelength

Wavelength Stability

∆λ_C

λ_C– 0.1

λ_C

λ_C+0.1

Optical Transmit Power

P_O

dBm

Modulated at

2.488Gb/s

Optical Transmit Power

(disabled)

P_{TX_DISABLE}

-40

0.3

dBm

Spectral Width

∆λ₂₀

0.1

20dB down from peak

using 10pm RBW

SMSR

Extinction Ratio

8.2

Filtered eye

-1200

3600

1600

ps/nm

Modulated at 2.667Gb/s

Modulated at 4.25Gb/s

Modulated at 1.25Gb/s

Dispersion Tolerance

10000

Dispersion Penalty

Jitter Generation (SOL)

Output Optical Eye

TJ_RMS

TJ_P-P

mUI

RMS

Peak-to-Peak

Compliant with Bellcore GR-253-CORE & ITU G.957 for SONET/SDH and with IEEE 802.3ae

for Ethernet and Fibre Channel

Data Sheet

APD Receiver Operating Specifications – Optical

All specifications relate to End of Life (EOL) values over temperature and supply voltage, unless otherwise stated.

Parameter

Symbol

Rx _{SENS_1}

Rx _{SENS_2}

Value

Typical

Units

Notes

Min

Max

Receiver Sensitivity

(OSNR = 30dB)

-28

-24

-34

dBm

Note 1, 8

Note 2, 8

Note 3, 8

Receiver Sensitivity

(OSNR = 21dB)

-24

-22

dBm

Note 4, 8

Receiver Sensitivity

(OSNR = 25dB)

Rx _{SENS_3}

dBm

Note 5, 8

Maximum

Input Power

-7

-9

-16

dBm

Note 1

Note 5

Note 6

Rx _OVERLOAD

Input Operating Wavelength

Reflectance

λ_RX

R _RX

P_A

1260

-40

1610

-27

-33

-31

Note 7

Loss of Signal - Asserted

Loss of Signal - Deasserted

Hysteresis

dBm

P_D

P_A- P_D

0.5

Notes:

-12

[1] Average power at 1 x 10

[2] Average power at 1 x 10

[3] Average power at 1 x 10 BER and a data rate of 2.667Gb/s.

[4] Average power at 1 x 10

[5] Average power at 1 x 10

BER and data rates of 125Mb/s to 2.667Gb/s.

BER and a data rate of 4.25Gb/s.

-12

-4

-12

BER and a data rate of 2.667Gb/s over 180km fibre.

BER and a data rate of 4.25Gb/s over 80km fibre.

BER and a data rate of 155.55Mb/s

-12

-10

[6] Average power at 1 x 10

[7] Between 1260nm and 1520nm minimum receiver sensitivity is reduced by 2dB (-26dBm minimum).

[8] ONSR measurements are made using an optical spectrum analyser with a resolution bandwidth of 0.1nm and an optical passband filter with a 3dB bandwidth of 1nm.

Transmitter Operating Specifications – Electrical

Parameter

Symbol

Value

Units

Notes

Min

0.125

3.13

500

Typical

Max

4.25

3.47

1600

160

Data Rate

V_CCTX

V_TXDIFF

T_R/ T_F

V_DH

2.667

3.3

Gb/s

Supply Voltage

PECL/CML Input

Input Rise/Fall

Differential pk-pk Note 1

20% - 80% Note 1

Input voltage high

Input voltage low

TX_DISABLE (asserted)

TX_DISABLE (negated)

TX_FAULT (asserted)

TX_FAULT ( negated)

3.47

0.8

V_DL

-0.3

V_FH

3.47

0.8

Output voltage high

Output voltage low

V_FL

-0.3

Notes:

[1] Test conditions: 100Ω differential (from 100MHz to 2.5GHz); V

TXDIFF

= | (V +) – (V -) |.

TD TD

Data Sheet

APD Receiver Operating Specifications – Electrical

Parameter

Symbol

Value

Units

Notes

Min

0.125

3.13

370

Typical

Max

4.25

3.47

2000

140

Data Rate

V_{CC_TX}

V_RXDIFF

T_R/ T_F

V_OH

2.667

3.3

Gb/s

Supply Voltage

Differential Output Swing

Rise/Fall Time

Differential pk-pk. Note 1

20% - 80% Note 1

Output Voltage High

Output Voltage Low

Loss of Signal (Asserted)

Loss of Signal (Negated)

Notes:

3.47

0.8

V_OL

-0.3

[1] Test conditions: 100Ω differential (from 100MHz to 2.5GHz); V

= | (V +) – (V -) |

RD RD

RXDIFF

Low Speed Electrical Signal Timings

The DWDM SFP MSA document specifies the full details of the low speed electrical interface in Section 3, including timings

and both AC and DC requirements.

Table 1: I/O Timing for Hardware Control and Status Functions.

Parameter

Symbol

t_off

Min

Max

Unit

Notes

Time from rising edge of

TX_DISABLE to when the optical

output falls below 10% of nominal

TX_DISABLE Assert Time

TX_DISABLE Negate Time

Time from falling edge of TX_DISABLE

to when the modulated optical output

rises above 90% of nominal

t_on

Time to initialize, including

reset of TX_FAULT

From negation of TX_FAULT/INT using

TX_DISABLE Optical power going to 90%

of final value

t_init

300

From power on to negation of TX

FAULT/INT, indicating laser temperature

has stabilised to within operating range.

Startup time

t_startup

TX_FAULT/INT Assert Time

TX_DISABLE to Reset

t_fault

Time from fault to TX_FAULT/INT on.

t_reset

Time TX_DISABLE must be held high to

reset TX_FAULT/INT

LOS Assert Time

LOS NegateTime

t_los_on

t_los_off

100

Time from LOS state to RX LOS assert

Time from non-LOS state to RX LOS

deassert

Serial ID Clock Rate

f_serial_clock

100

kHz

Data Sheet

Systems Performance Capabilities

The following section demonstrates the typical systems level performance capabilities of the IGF-28111J DWDM SFP

Transceiver. The enhanced performance and flexibility of the module is highlighted through operation at various data rates

and optical signal to noise ratio (OSNR) levels.

Figure 1: Receiver Sensitivity for OC-48 Transmission over 0km to 300km (30dB OSNR).

Data Sheet

Optical Signal to Noise Ratio (OSNR) Performance

Figure 2: Receiver Sensitivity for OC-48 Transmission under OSNR levels of 30dB to 16dB.

Figure 3: Receiver Power Penalty for OC-48 Transmission under OSNR levels of 30dB to 16dB.

Data Sheet

Multi-rate Performance ( OC-3 & 1xFC )

Figure 4: Receiver Sensitivity for OC-3 Transmission over 0km to 300km (30dB OSNR).

Figure 5: Receiver Sensitivity for 1.063Gb/s Transmission over 0km to 225km (30dB OSNR).

Data Sheet

Multi-rate Performance, cont. ( 3.125Gb/s & 4.25Gb/s )

Figure 6: Receiver Sensitivity for 3.125Gb/s Transmission over 0km to 225km (30dB OSNR).

Figure 7: Receiver Sensitivity for 4.25Gb/s FC Transmission over 0km to 150km (30dB OSNR).

Data Sheet

Optical Transmitter Eye Diagrams

Figure 8: Transmitter Eye Mask for 1G FC at 1.0625Gb/s.

Figure 9: Transmitter Eye Mask for OC-48 at 2.488Gb/s

Figure 10: Transmitter Eye Mask for 10GbE XAUI at 3.125Gb/s

Data Sheet

Electrical Pin-out Details

Figure 11: Diagram of Host Board Connector Block Pin Numbers and Names.

Table 2: Pin Definitions and Connection Sequence during Hot Plugging.

Pin Number

Name

Function

Plug Sequence

V_EET

Transmitter Ground

Transmitter Fault Indicator

Transmitter Disable

Module Definition 2

Module Definition 1

Module Definition 0

Not Implemented. See note.

Loss of Signal

TX_FAULT/INT

TX_DISABLE

MOD-DEF(2)

MOD-DEF(1)

MOD-DEF(0)

Tone in

LOS

Tone out

V_EER

Not Implemented. See note.

Receiver Ground

V_EER

Receiver Ground

RD-

Inverted Received Data Out

Received Data Out

Receiver Ground

RD+

V_EER

V_CC

Receiver Power

V_CC

Transmitter Power

V_EET

TD+

TD-

Transmitter Ground

Transmit Data In

Inverted Transmit Data In

Transmitter Ground

V_EET

Note: The DWDM MSA provisions for a supervisory tone via pin 7 and pin 9. However, the Bookham DWDM SFP does not currently support this option.

Data Sheet

Mechanical Outline

Figure 12: Mechanical outline drawing of DWDM SFP Transceiver.

Data Sheet

Diagnostics specifications

A digital diagnostics interface is available on Bookham SFP

transceivers as a 2-wire serial interface and provides user

access to module identification data, customer specific data,

link type, static and dynamic monitors and a check code

mechanism for verifying accuracy in the data registers. These

static and dynamic diagnostics allow users to remotely and

accurately identify modules and their vendors, enquire about

its compatibility with the system and also verify which

enhanced diagnostics are supported. The user can also

monitor module parameters to determine the module and link

condition and provide hardware alerts upon an alarm or

warning event.

The memory location starting at A0h (data address 0 ~ 128)

contains the Serial ID fields. This is a static data memory

location for details such as vendor information, module

identification, user specific data and a check code for verifying

accuracy in the data registers.

The memory location starting at A2h (data address 0 ~ 255)

contains Enhanced Diagnostics fields. The Enhanced

Diagnostics are based on the SFF-8472 specification

developed in the SFF (Small Form Factor) standards

organization with an added TX_FAULT interrupt feature that

provides a hardware alert upon reaching an alarm or warning

condition on any, or all, of the diagnostics monitors. Enhanced

Diagnostics provide a real-time indication of system and

module condition, alerting the user to apparent or pending link

or module problems. This is implemented through the use of

alarm and warning registers that are updated approximately

every 60 milliseconds. Data from these registers are internally

calibrated over the specified operating ranges as described in

this data sheet. Alarm and warning thresholds are factory

preset values and are interpreted as real 16 bit data. The

optional TX_FAULT interrupt feature, if activated, pulls the

TX_FAULT pin (pin 2) high upon reaching an alarm or warning

condition on the diagnostics monitors mentioned above. The

masking feature allows any of the warning and alarm flags to

be dynamically masked by the user.

The Enhanced Digital Diagnostics provide real-time monitoring

receiver

input

power,

transmitter

power,

internal module temperature, laser bias current and supply

voltage parameters.

The 2-wire serial interface is defined by the GBIC (GigaBit

Interface Converter) specification and the SFP MSA

(Multi-Source Agreement) document dated September 14th,

2000. It is also compliant with the proposed DWDM SFP MSA

Document. This interface allows read-only access to two

separate memory locations starting at 1010000X (A0h)

and 101000X (A2h). Table 3 and Table 4 contain address

descriptions and register mapping information for both

memory locations.

Data Sheet

Table 3: DWDM SFP MSA Serial Identification Data Fields (Location A0h).

Data Address Field Size Bookham Module

Name of Field

Description of Field

(dec)

(Bytes)

Data (hex)

0Bh

27h

07h

Identifier

Ext. Identifier

Connector

Transceiver

Type of serial transceiver

Extended identifier of type of serial transceiver

Code for connector type

3-10

00h,0Ch,44h,00h,

80h,10h,01h,00h

Code for electronic compatibility

or optical compatibility

03h

19h

B4h

46h

00h

5Fh

Encoding

BR, Nominal

Length (9µm)–km

Max Temp

Code for serial encoding algorithm

Nominal bit rate, units of 100 MBits/sec

Link length supported for 9/125µm fiber, units in km

Maximum operating case temperature in °C

Minimum operating case temperature in °C

Maximum supply current in units of 4mA

13-14

Min Temp

Max Supply

Current

Reserved

41h

Channel spacing

and tuning

Channel spacing compatibility and number

of ITU channels supported

20-35

42h,4Fh,4Fh,

Vendor Name

SFP transceiver vendor name (ASCII)

4Bh,48h,41h,4Dh

Module dependent

Optional

Features

Optional DWDM features (not currently

supported by Bookham)

37-39

40-55

00h 09h A6h

Vendor OUI

Vendor PN

SFP transceiver vendor IEEE company ID

Module dependent

Part number provided by SFP transceiver

vendor (ASCII)

56-59

03h

Vendor Rev

Revision level for part number provided by

vendor (ASCII)

60-61

Module dependent

1Ah

Wavelength

CC_BASE

Options

Laser wavelength (in nm)

Laser wavelength (fractional part in units of 10pm)

Check code for Base ID Fields (addresses 0 – 62)

64-65

Indicates which optional transceiver signals

are implemented

46h

5Eh

BR, max

BR, min

Upper bit rate margin, units in %

Lower bit rate margin, units in %

68-83

84-91

Module dependent

68h

Vendor SN

Date Code

Serial number provided by vendor (ASCII)

Vendor’s manufacturing date code

Diagnostics

Monitoring Type

Indicates the type of diagnostics implemented in

the transceiver

F0h

Enhanced

Options

Indicates which optional enhanced features

are implemented

01h

SFF-8472

Compliance

Indicates which revision of SFF-8472 the

transceiver complies with

Module dependent

CC_EXT

Check code for the Extended ID Fields

(addresses 64-94)

96-127

128-255

128

Vendor

Vendor Specific EEPROM (Vendor specific data;

read only)

Specific

Reserved

Reserved for future use

Data Sheet

Table 4: Enhanced Digital Diagnostics Data Fields (Location A2h).

Data Address

(dec)

Field Size

(Bytes)

Name of Field

Description of Field

A/D Table for Alarm and Warning Thresholds

00-55

High/Low Alarm and

Warning Levels

Specifies factory preset alarm and warning thresholds

defined in Table 5.

Calibration Constants for External Calibration Option

56-94

Unused in DWDM devices. All Bytes Set to 0.

Low order 8 bits of the sum of bytes 0-94

Checksum

A/D Values

A/D Values and Status Bits

96-109

Real-time A/D binary values of the following enhanced diagnostics:

module temperature, supply voltage, laser bias current, transmit

optical power, receive optical power, laser temperature and TEC

current. These values are Internally calibrated absolute

measurements. All diagnostic parameters implemented in these

address locations have a corresponding high and low, alarm

and warning thresholds assigned in address locations 00-55.

Optional Status/Control Bits

110

Soft Control Signals

Reserved

“Soft” control signals monitored over the 2-wire access port.

Continuously updated real-time status of the following control

signals: TX_FAULT, TX_DISABLE, Rate Select, and LOS.

Last bit (LSB) indicates transceiver readiness to transmit data.

111

Reserved

Reserved Optional Alarm and Warning Flag Bits

112-117

Alarm & Warning Flags

Real time, single point bits indicating module parameters that are

approaching or outside normal operating limits. Parameters

monitored are: module temperature, supply voltage, laser bias

current, transmit optical power, receive optical power, laser

temperature and TEC current.

The flags are internally calibrated thresholds with limits

corresponding to levels detailed in addresses 00-39 above.

118-119

Warning Mask

Masking bits corresponding to Warning bits of bytes 116 and

117 respectively

Vendor Specific Memory Addresses

120-126 Vendor Specific

Table Select Byte (2-wire Address A2h)

Vendor specific data

127

Table Select

The byte value defines the Table location for subsequent reads

and writes to bytes locations 128-255

User EEPROM

128-247

120

User EEPROM

Vendor Specific

User writable EEPROM

248-255

Vendor specific control functions

Table 5: Alarm and Warning Thresholds.

Address

Value

Description

Address

Value

Description

00-01

02-03

04-05

06-07

08-09

10-11

12-13

14-15

16-17

18-19

20-21

22-23

24-25

26-27

85 ºC

-10 ºC

80 ºC

Temp High Alarm

Temp Low Alarm

Temp High Warning

Temp Low Warning

VCC High Alarm

28-29

30-31

32-33

34-35

36-37

38-39

40-41

42-43

44-45

46-47

48-49

50-51

52-53

54-55

2512µW

1585µW

200µW

0.794µW

126µW

1.585µW

60 ºC

30 ºC

55 ºC

35 ºC

600 mA

-600 mA

400 mA

-400 mA

Tx Power High Warning

Tx Power Low Warning

Rx Power High Alarm

-5 ºC

Rx Power Low Alarm

3.63 V

2.97 V

3.47 V

3.14 V

70 mA

10 mA

55 mA

15 mA

3162µW

1259µW

Rx Power High Warning

Rx Power Low Warning

Laser Temp High Alarm

Laser Temp Low Alarm

Laser Temp High Warning

Laser Temp Low Warning

TEC Current High Alarm

TEC Current Low Alarm

TEC Current High Warning

TEC Current Low Warning

VCC Low Alarm

VCC High Warning

VCC Low Warning

Bias High Alarm

Bias Low Alarm

Bias High Warning

Bias Low Warning

Tx Power High Alarm

Tx Power Low Alarm

Data Sheet

Regulatory Compliance

Bookham IGP-28111J SFP transceiver is designed to be Class I Laser safety compliant and is certified per the following standards:

Feature

Agency

Standard

Certificate / Comments

FDA/CDRH

TUV

CDRH 21J CFR1040.10

IEC/EN60825-1:2001

Pass. Accession no. 0522631-00

US-TUVR-3209

CU7206220601

US-TUVR-3209

Pass

Laser Safety

CAN/CSA-60825-1-03

UL60950-1:2001

Product Safety

EMC

TUV

FCC

CAN/CSA-C22.2 No.60950-1-03

IEC/EN60950-1:2001

Title 47, Part 15, 1-12.5 GHz, Class B

RoHS Compliance

Bookham is fully committed to environment protection and sustainable development and has set in place a comprehensive

program for removing polluting and hazardous substances from all of its products. The relevant evidence of RoHS compliance is

held as part of our controlled documentation for each of our compliant products. RoHS compliance parts are available to order,

please refer to the ordering information section for further details.

Package and Handling Instructions

Process Plug

It is important to note that single mode optics, as with all optical devices are susceptible to contamination from air borne particles,

human body oils, and mating connector particles. Care should be taken to protect all exposed optical interfaces with process

plugs and dust covers. All Bookham IGP-2000 SFP products are supplied with a process plug. This plug protects the transceiver’s

optics during standard handling and manufacturing processes. It is recommended that the process plug remain in the transceiver

whenever an optical fibre connector is not inserted.

ESD Discharge (ESD)

Normal ESD precautions are required during the handling of this module. This transceiver is shipped in ESD protective packaging

and it should not be removed from its packaging or otherwise handled unless in an ESD protected environment utilizing standard

grounded benches, floor mats, and wrist straps.

Eye Safety

The Bookham IGP-2000 Series SFP products are Class I laser products per IEC/EN60950-1:2001 and 60825-1:2001, and are

certified per CDRH, 21 CFR 1040, Laser Safety Requirements. It is an eye safe device when operated within the limits of this

specification. Operating this product in a manner inconsistent with intended usage and specification may result in hazardous

radiation exposure. Tampering with this laser based product may warrant, under law, re-certification of the modified product as

required by the U.S. Food and Drug Administration (21 CFR 1040).

IGP-28111J-16 相关器件

型号	制造商	描述	价格	文档
IGP-28111J-17	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格
IGP-28111J-18	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格
IGP-28111J-19	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格
IGP-28111J-20	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格
IGP-28111J-21	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格
IGP-28111J-22	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格
IGP-28111J-23	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格
IGP-28111J-24	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格
IGP-28111J-25	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格
IGP-28111J-26	BOOKHAM	SFP Optical Transceivers for 2.7Gb/s 180km DWDM Applications	获取价格