7090-01-YS-A1-R1 [BOURNS]
Network Interface Device; 网络接口设备型号: | 7090-01-YS-A1-R1 |
厂家: | BOURNS ELECTRONIC SOLUTIONS |
描述: | Network Interface Device |
文件: | 总2页 (文件大小:456K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Features
■ Expands to add POTS lines, DSL or both
■ Convenient ground attachment
U
®
L
■
Listed per UL 497 (File: E53117)
■ Manufactured from high-impact resistant,
ultraviolet-desensitized, flame retardant,
UL Recognized plastic
■ Optional sealed switching jacks with
Insulation DIsplacement Connectors
(IDCs)
■ Subscriber lockable with Telco override
7090 Series – Network Interface Device
Bourns® 7090 NID provides a secure and weather resistant enclosure for Telco service for residential or commercial installa-
tions. The 7090 supplies station protection and test access points and can be configured for a maximum of six POTS lines or
three lines with DSL. The 7090 features plenty of working space for wire management.
How To Order
7090 - 0X - X X - XX - XX
Model Number Designator
Number of Twisted Pairs
1 = One
2 = Two
3 = Three 5 = Five
4 = Four 6 = Six
Station Protector Options
D1 = 455HS-MSP (2377-45-HS) Voice / DSL / Data (UL, cUL)
Z1 = 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL)
E2 = 155HS-MSP (2378-35-HS) Voice / DSL / Data (UL, cUL)
Y2 = 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL)
B = 125EW (2374-01) Dual Gas Tube (UL, cUL, Telcordia)
C = 125EW-R (2375-01) Dual Gas Tube (UL, cUL, RUS)
L = 356M (2377-01) Balanced Gas Tube (UL, cUL, RUS)
M = J130S (2380-27-01) Solid State Protector (UL, cUL)
T = Tii355M
O = No Station Protectors (Not available with DSL Configurations)
*For DSL systems requiring capacitive balance within 1 pF.
Note 1 = Digi.Guard - 356 size, RUS Maximum Duty
Note 2 = Digi.Guard II - 125 size, RUS Heavy Duty
Special Options
G = Security Screw in Telco Cover
H = Security Screw in security plate
S = Sealed Switching Jack w/IDC (85122-T-IDC)
F = Sealed Switching Jack 4-Post (85122-T4)
B = Expansion Bridge w/Binding Posts (85122-B)
I =
Expansion Bridge w/IDC (85122-IDC)
O = No options (standard 85122 jack)
DSL Options†
A1 = (1) 3610AADSL POTS Splitter
A2 = (2) 3610AADSL POTS Splitters
A3 = (3) 3610AADSL POTS Splitters
P1 = (1) 3610A2 DSL 2+ POTS Splitter
P2 = (2) 3610A2 DSL 2+ POTS Splitters
P3 = (3) 3610A2 DSL 2+ POTS Splitters
V1 = (1) 3630A VDSL POTS Splitter
V2 = (2) 3630A VDSL POTS Splitters
V3 = (3) 3630A VDSL POTS Splitters
† DSL Configuration Note:
The 3610A, 3610A2 and 3630A must be ordered with options D, Z, E or Y Station Protectors. 7090 NIDs ordered with DSL units
will include Special Option F (4-post sealed switching jacks). Example: 7090-01-EF-A1
DSL Equalization Option
R1 = (1) 3660 Equalization Module
To add lines, use station protector +
85122
Standard Jack (Not available with DSL configurations)
85122-T4
Sealed Switching Jack, 4-post
85122-T-IDC Sealed Switching Jack w/IDC
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
7090 Series – Network Interface Device
POTS Splitter Installation
MOUNTING POST
POTS SPLITTER
(ON TOP)
STATION
PROTECTOR
(ON BOTTOM)
85122-T4
PROTECTOR
POTS MODULE
GROUND
TERMINAL
MOUNTING
POST
PROTECTOR
POTS
SPLITTER
MOUNTING
POST
BEFORE
FINISHED
COMMON POST
ATTACHMENT
(7090 / 91)
85122-T (SUPPLIED)
DATA MODULE
Product Dimensions
High
229
Wide
216
Deep
69
(9.0)
(8.5)
(2.7)
CUSTOMER SIDE
MM
(INCHES)
DIMENSIONS:
LOCKED TELCO SIDE
FROM C.O.
CAT 5
TO PHONE
TO DSL MODEM
Expansion Bridges
85122-IDC
RJ11 Subscriber Bridges
85122-B
Binding Post
85122-T4*
Internal Switch - 4 Lugs
Insulation Displacement
Connectors
85122
Standard Loop
1
2
3
4
85122-T-IDC*
Sealed Switch Jack w/IDC
*Includes environmental sealant and closed-cell foam gasket.
REV. K 06/06
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
相关型号:
©2020 ICPDF网 联系我们和版权申明