96R1A-R16-B15L [BOURNS]
Potentiometer, Conductive Plastic, 0.5W, 10000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6351;
| 型号： | 96R1A-R16-B15L |
| 厂家： | 
BOURNS ELECTRONIC SOLUTIONS |
| 描述： | Potentiometer, Conductive Plastic, 0.5W, 10000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6351 PC 电阻器 |
| 文件： | 总4页 (文件大小：279K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
■ Virtually infinite electrical circuit isolation
■ Sealed for board wash
■ Metal or plastic shaft options
■ RoHS compliant*
Model 96 - 5/8 ” Square Sealed Single-Turn Panel Control
1
Initial Electrical Characteristics
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H).........................(B & E) 1 K ohms to 1 megohm......................... (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .................(D,G,S, & T) 1 K ohms to 1 megohm................. (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance...............................10 % or 20 %.................................................... 5% or 10%
Independent Linearity....................................... 5 %.................................................................. 5 %
Absolute Minimum Resistance.........................2 ohms maximum.............................................. 2 ohms maximum
Effective Electrical Angle..................................(Linear tapers) 240 ° 5 °.................................. (Linear tapers) 240 ° ꢀ °
(Audio tapers) 225 ° 5 °.................................. (Audio tapers) 225 ° ꢀ °
Contact Resistance Variation ........................... 1 %.................................................................. 1 % or ꢁ ohms (ꢂhichever is greater)
Dielectric Withstanding Voltage (MIL-STD-202, Method ꢁ01)
Sea Level ....................................................1,500 VAC minimum.......................................... 1,500 VAC minimum
70,000 Feet.................................................500 VAC minimum............................................. 500 VAC minimum
Insulation Resistance (500 VDC) ......................1,000 megohms minimum................................. 1,000 megohms minimum
Poꢂer Rating (Voltage Limited By Poꢂer Dissipation or ꢁ50 VAC, Whichever Is Less)
+70 °C Single Section Assembly................(Linear tapers) 1 ꢂatt......................................... (Linear tapers) 2 ꢂatts
(Audio tapers) 0.5 ꢂatt ...................................... (Audio tapers) 1 ꢂatt
+125 °C.......................................................0 ꢂatt................................................................. 0 ꢂatt
Theoretical Resolution......................................Essentially infinite.............................................. Essentially infinite
1
Environmental Characteristics
Operating Temperature Range .......................... -40 °C to +125 °C ................................................-40 °C to +125 °C
Storage Temperature Range.............................. -55 °C to +125 °C ................................................-55 °C to +125 °C
Temperature Coefficient Over Storage
Temperature Range.......................................... 1,000 ppmꢃ°C..................................................... 150 ppmꢃ°C
Vibration (Single Section)................................... 15 G......................................................................15 G
Total Resistance Shift................................... 2 % maximum.................................................... 2 % maximum
Voltage Ratio Shift........................................ 5 % maximum.................................................... 5 % maximum
Shock (Single Section)....................................... ꢁ0 G......................................................................ꢁ0 G
Total Resistance Shift................................... 2 % maximum.................................................... 2 % maximum
Voltage Ratio Shift........................................ 5 % maximum.................................................... 5 % maximum
Load Life ............................................................ 1,000 hours ..........................................................1,000 hours
Total Resistance Shift................................... 10 % maximum.................................................. 5 % maximum
Rotational Life (No Load) ................................... 100,000 cycles.....................................................100,000 cycles
Total Resistance Shift................................... (Linear tapers) 10 ohms or 15 % TRS max.......(All tapers) 5 % TRS max.
(ꢂhichever is greater)
(Audio tapers) 20 % maximum
Contact Resistance Variation
@ 50,000 cycles ........................................... (Linear tapers) 2 %............................................. 2 %
(Audio tapers) ꢁ %............................................. ꢁ %
Moisture Resistance (MIL-STD-202, Method 10ꢁ, Condition B)
Total Resistance Shift................................... (Linear tapers) 10 % TRS maximum .................(All tapers) 5 % TRS maximum
(Audio tapers) 20 % TRS maximum
Insulation Resistance (500 VDC).................. 100 megohms minimum ......................................100 megohms minimum
IP Rating............................................................. IP ꢀ5 .....................................................................IP ꢀ5
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Model 96 - 5/8 ” Square Sealed Single-Turn Panel Control
1
Mechanical Characteristics
Stop Strength (1/4 ” D shaft) .............................................................................................................................................45.19 N-cm (4 lb.-in.)
(1/8 ” D shaft) .............................................................................................................................................33.89 N-cm (3 lb.-in.)
Mechanical Angle.................................................................................................................................................................................300 ° 5 °
Torque
Starting........................................................................................................................................... 0.3 max. above average running torque
Running Torque
Single or Dual Section (A & R Bushings)..................................................................................................0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)
Single or Dual Section (C & U Bushings)..................................................................................................0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Mounting .............................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Variation...................................................................................................................... 0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel
Weight (Single Section, Metal Bushing)...............................................................................................................................12.7 grams nominal
Terminals.................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs
Soldering Condition ...........................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. Immersion wash is not recommended.
Marking ..................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number
Hardware...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
NOTE: Performance specifications do not apply to units subjected to printed circuit board immersion cleaning processes.
1
At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Product Dimensions
Shaft Flat Orientation
Model 96 PC Pin Terminals, In-Line
MOUNSING
ꢁURFACE
1ꢀDꢂꢂ
(D62ꢀ)
L
TIAD
13D72 0D3ꢂ
(Dꢀ40 D01ꢀ)
120 ° ꢀ ° ꢁSTD
12D9ꢀ D203
(Dꢀ10 D00ꢂ)
0D79 D02ꢀ
FLAS ORIENSASION
(ꢁHAFS AS CCW ENT)
7D92
1D37 0D0ꢂ
(D0ꢀ4 D003)
2D36 0D0ꢂ
(D093 D003)
(D312)
(D031 D010)
1
CCW
3
2
POSENSIOMESER
ꢁEE HOW SO ORTER
1D19
(D047)
“A” ꢁSYLE
ADRD LUG
9Dꢀ3
(D37ꢀ)
CHARS FOR
R
BUꢁHING OPSIONꢁD
1ꢀD29 0Dꢀ6
(D602 D022)
11D0ꢀ 0D20
(D43ꢀ D00ꢂ)
2Dꢀ4
(D100)
R1
0D76 0D0ꢀ
(D030 D002)
SYPD
ꢁEE
1
2
3
2Dꢀ4
(D100)
NEXS PAGE
FOR ꢁHAFS
OPSIONꢁD
D3ꢂ1
(D01ꢀ )
DXX
SOLERANCEꢁ EXCEPS Aꢁ ꢁHOWN: TECIMAL DXXX
FRACSION 1ꢃ64
9D6ꢀ
ANGLE ꢀ °
(D3ꢂ)
MM
TIMENꢁIONꢁ:
(INCHEꢁ)
BACK VIEW
ꢁpecifications are subject to change without noticeD
She device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over timeD
Users should verify actual device performance in their specific applicationsD
Model 96 - 5/8 ” Square Sealed Single-Turn Panel Control
Product Dimensions
Plastic
Shaft
SHAFT TYPE "B" (USES BUSHING A)
SHAFT TYPE "D" (USES BUSHING C)
SHAFT TYPE "T" (USES BUSHING U)
1.60+.38/-.00
(.063+.015/-.000)
3.16+.00/-.15
DIA.
1.50 .ꢀ5
(0.06 .001)
Styles
(.1ꢀ45+.000/-.006)
6.3ꢀ+.000/-.15ꢀ
3.988 +0.000/-0.051
(.157 +.000/-.00ꢀ)
DIA.
.79
(0.03)
1.19
(.047)
(.ꢀ49+.000/.006)
STD. LENGTHS:
DIA.
STD. LENGTHS:
1ꢀ.70
15.88
19.05
STD. LENGTHS:
15.88
(.500) (.6ꢀ5) (.750)
16.0
(.630) (.866)
ꢀꢀ.0
1ꢀ.70
19.05
ꢀꢀ.ꢀ3
(.500) (.6ꢀ5) (.750) (.875)
SHAFT TYPE "C" (USES BUSHING A)
SHAFT TYPE "R" (USES BUSHING R)
SHAFT TYPE "W" (USES BUSHING A)
11.18 .38
(.440 .015)
14.ꢀ7 .ꢀ5
(.56ꢀ .010)
1.80 .ꢀ5
(0.07 .001)
5.994 +0.000/-0.051
(.ꢀ36 +.000/-.00ꢀ)
DIA.
6.31+.0ꢀ5/-.051
(.ꢀ485+.001/.00ꢀ)
DIA.
6.30+.000/-.15ꢀ
5.49
(.ꢀ16)
1.00
(.04)
48 TOOTH
(.ꢀ48+.000/.006)
DIA.
STD. LENGTHS:
STD. LENGTHS:
STD. LENGTHS:
ꢀ5.40
(1.00)
16.0
(.630) (.866)
ꢀꢀ.0
19.05
(.750) (.875)
ꢀꢀ.ꢀ3
Metal
Shaft
Styles
SHAFT TYPE "H" (USES BUSHING A)
SHAFT TYPE "A" (USES BUSHING A)
6.3ꢀ+.010/-.0ꢀ5
SHAFT TYPE "S" (USES BUSHING R)
“F” .38
(“F” .015)
“F” .381
(“F” .015)
6.3ꢀ+.010/-.0ꢀ5
6.000+.000/-.035
(.ꢀ490+.0004/.0010)
DIA
(.ꢀ490+.0004/.0010)
(.ꢀ36ꢀ+.0000/.0014)
DIA
DIA
5.486 .051
(.ꢀ16 .00ꢀ)
3.988 .076
(.157 .003)
STD. LENGTHS:
15.88 19.05 ꢀꢀ.ꢀ3
(.500) (.6ꢀ5) (.750) (.875)
STD. LENGTHS:
STD. LENGTHS:
19.05 ꢀꢀ.ꢀ3
1ꢀ.70
ꢀ5.4
(1.000)
16.0
ꢀꢀ.0
(.630) (.866)
(.750) (.875)
FLAT LENGTH “F”:
FLAT LENGTH “F”:
6.99
(.ꢀ75)
1ꢀ.98
(.511)
7.95
(.313) (.438)
11.13
SHAFT TYPE "E" (USES BUSHING C)
0.79 0.ꢀ5
3.16
(.031 .010)
(.1ꢀ45)
DIA
SHAFT TYPE "J" (USES BUSHING R)
SHAFT TYPE "V" (USES BUSHING U)
0.79
(.031)
1.80 0.ꢀ5
(.071 .010)
6.00+.000/-.035
(.ꢀ36ꢀ+.0000/.0010)
DIA
1.50 0.ꢀ5
(.059 .010)
3.99+.000/-.035
(.1571+.0000/.0010)
STD. LENGTHS:
DIA
1ꢀ.0
16.0
19.0
1.00 0.13
(.039 .054)
(.500) (.6ꢀ5) (.750)
0.79 0.13
(.031 .054)
STD. LENGTHS:
STD. LENGTHS:
16.0 ꢀꢀ.0
(.630) (.866)
16.0
ꢀꢀ.0
(.630) (.866)
SHAFT TYPE "G" (USES BUSHING A)
1.60+.38/-.00
(.063+.015/-.000)
6.3ꢀ+.010/-.0ꢀ5
(.ꢀ490+.0004/.0010)
DIA.
.0ꢀ
(.050)
TOLERANCES EXCEPT AS SHOWN: .XX =
1.194
(.047)
.005
.XXX =
(.1ꢀ7)
.0005
(.01ꢀ7)
.XXXX =
STD. LENGTHS:
15.88 19.05
(.500) (.6ꢀ5) (.750) (.875)
1ꢀ.70
ꢀꢀ.ꢀ3
MM
(INCHES)
DIMENSIONS:
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
How to Order Model 96 Panel Controls
L
9 6
A
1
A
-
A
2 8
-
A
1 5
ANTI-ROTATION LUG
SHAFT
LENGTH
(FMS)
AVAILABLE
ONLY IN
BUSHING
Code
RoHS IDENTIFIER
Compliant
L
A
D
Single .3ꢀ5 ” (7.8 mm) R,
9ꢀ °CW
Code Description
No Lug
16
20
24
28
32
1/2 ”L
5/8 ”L
3/4 ”L
7/8 ”L
1 ”L
A, C
A, C
A, C
A
# SECTIONSꢂꢂꢂꢂ
A
1
Single
METRIC
16
16 mmL
R, U
R, U
22
22 mmL
BUSHING
A
C
R
U
Metal Plain 3/8 ” (9.53 mm) D x 3/8 ” (9.53 mm) L
Metal Plain 1/4 ” (6.35 mm) D x 1/4 ” (6.35 mm) L
Metal Plain 1ꢀ mm D x 9 mm L
ELEMENT TAPER
TYPE/TOLERANCE
RESISTANCE CODE
VALUE IN OHMS
Metal Plain 7 mm D x 9 mm L
(A)
Linear Cermet 1ꢀ ꢁ
(05) - 100
(30) - 15 K
(16) - 20 K
(17) - 25 K
(18) - 5ꢀ K
(2ꢀ) - 1ꢀꢀ K
(21) - 200 K
(22) - 250 K
(H)
Linear Cermet 5 ꢀ
(28) - 150
(06) - 200
(07) - 250
(08) - 500
(1ꢀ) - 1 K
(11) - 2 K
MODEL
96 Single-Turn, In-Line PC Pins, Sealed
(12) - 2.5 K (23) - 500 K
(13) - 5 K
(15) - 1ꢀ K
(1ꢀ) - 1 K
(25) - 1 M
AVAILABLE ONLY IN
SHAFT TYPE
LENGTHS
(CODE)
BUSHINGS
(CODE)
(B)
Linear C-P 2ꢀ ꢁ
(18) - 5ꢀ K
(E)
Linear C-P 10 ꢀ
(12) - 2.5 K (2ꢀ) - 1ꢀꢀ K
B
C
D
R
T
Plastic Single Slotted 1/4 " (6.35 mm) D
Plastic Single Flatted 1/4" (6.35 mm) D
Plastic Single Plain 1/8" (3.18 mm) D
Plastic Single Slotted 6 mm D
16, 20, 24, 28
24, 28
A
A
C
R
U
A
A
C
A
A
R
R
U
(13) - 5 K
(22) - 250 K
(15) - 1ꢀ K (23) - 500 K
(16) - 20 K (25) - 1 M
(17) - 25 K
16, 20, 24
Metric 16,22
Metric 16, 22
32
(C)
(D)
(F)
(G)
(S)
(T)
CW Audio Cermet 10 ꢀ
CW Audio C-P 20 ꢀ
(10) - 1 K
(18) - 50 K
Plastic Single Slotted 4 mm D
(12) - 2.5 K (20) - 100 K
W
A
E
G
H
J
Plastic Single Knurled 1/4" (6.35 mm) D
Metal Single Plain 1/4" (6.35 mm) D
Metal Single Slotted 1/8" (3.18 mm) D
Metal Single Slotted 1/4" (6.35 mm) D
Metal Single Flatted 1/4" (6.35 mm) D
Metal Single Slotted 6 mm D
CCW Audio Cermet 10 ꢀ (13) - 5 K
(22) - 250 K
16, 20, 24
16, 20, 24
16, 20, 24, 28
24, 28
CCW Audio C-P 20 ꢀ
CW Audio C-P 10 ꢀ
CCW Audio C-P 10 ꢀ
(15) - 10 K (23) - 500 K
(17) - 25 K (25) - 1 M
Metric16, 22
Metric 16, 22
Metric 16, 22
S
V
Metal Single Flatted 6 mm D
Boldface features are Bourns standard options.
All others are available with higher minimum order
quantities.
Metal Single Slotted 4 mm D
REV. 05/13
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
相关型号：
96R1A-R22-B15
Potentiometer, Conductive Plastic, 0.5W, 10000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6351
BOURNS
96R1A-R22-B15L
Potentiometer, Conductive Plastic, 0.5W, 10000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6351
BOURNS
©2020 ICPDF网 联系我们和版权申明