97C2A-D20-C25/R52 [BOURNS]
Potentiometer, Cermet, 1W, 1000000ohm, 10% +/-Tol, -150,150ppm/Cel, 6398,;型号: | 97C2A-D20-C25/R52 |
厂家: | BOURNS ELECTRONIC SOLUTIONS |
描述: | Potentiometer, Cermet, 1W, 1000000ohm, 10% +/-Tol, -150,150ppm/Cel, 6398, |
文件: | 总7页 (文件大小:340K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Features
■ Virtually infinite electrical circuit isolation
■ Metal or plastic shaft options
■ DPST and DPDT switch options
■ RoHS compliant versions available*
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
1
Initial Electrical Characteristics
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H).........................(B & E) 1 K ohms to 1 megohm......................... (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .................(D,G,S, & T) 1 K ohms to 1 megohm................. (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance...............................10 % or 20 %.................................................... 5% or 10%
Independent Linearity....................................... 5 %.................................................................. 5 %
Absolute Minimum Resistance.........................2 ohms maximum.............................................. 2 ohms maximum
Effective Electrical Angle..................................(Linear tapers) 240 ° 5 °.................................. (Linear tapers) 240 ° ꢀ °
(Audio tapers) 225 ° 5 °.................................. (Audio tapers) 225 ° ꢀ °
Contact Resistance Variation ........................... 1 %.................................................................. 1 % or ꢁ ohms (ꢂhichever is greater)
Dielectric Withstanding Voltage (MIL-STD-202, Method ꢁ01)
Sea Level ....................................................1,500 VAC minimum.......................................... 1,500 VAC minimum
70,000 Feet.................................................500 VAC minimum............................................. 500 VAC minimum
Insulation Resistance (500 VDC) ......................1,000 megohms minimum................................. 1,000 megohms minimum
Poꢂer Rating (Voltage Limited By Poꢂer Dissipation or ꢁ50 VAC, Whichever Is Less)
+70 °C Single Section Assembly................(Linear tapers) 0.5 ꢂatt...................................... (Linear tapers) 2 ꢂatts
(Audio tapers) 0.25 ꢂatt .................................... (Audio tapers) 1 ꢂatt
+70 °C Multiple Section Assembly .............(Linear tapers) 0.5 ꢂatt/section......................... (Linear tapers) 1 ꢂatt/section
(Audio tapers) 0.25 ꢂatt/section ....................... (Audio tapers) 0.5 ꢂatt/section
+125 °C.......................................................0 ꢂatt................................................................. 0 ꢂatt
Theoretical Resolution......................................Essentially infinite.............................................. Essentially infinite
1
Environmental Characteristics
Operating Temperature Range .......................... -40 °C to +125 °C ................................................-40 °C to +125 °C
Storage Temperature Range.............................. -55 °C to +125 °C ................................................-55 °C to +125 °C
Temperature Coefficient Over Storage
Temperature Range.......................................... 1,000 ppm/°C..................................................... 150 ppm/°C
Vibration (Single Section)................................... 15 G......................................................................15 G
Total Resistance Shift................................... 2 % maximum.................................................... 2 % maximum
Voltage Ratio Shift........................................ 5 % maximum.................................................... 5 % maximum
Shock (Single Section)....................................... ꢁ0 G......................................................................ꢁ0 G
Total Resistance Shift................................... 2 % maximum.................................................... 2 % maximum
Voltage Ratio Shift........................................ 5 % maximum.................................................... 5 % maximum
Load Life ............................................................ 1,000 hours ..........................................................1,000 hours
Total Resistance Shift................................... 10 % maximum.................................................. 5 % maximum
Rotational Life (No Load) ................................... 100,000 cycles.....................................................100,000 cycles
Total Resistance Shift................................... (Linear tapers) 10 ohms or 15 % TRS max.......(All tapers) 5 % TRS max.
(ꢂhichever is greater)
(Audio tapers) 20 % maximum
Contact Resistance Variation
@ 50,000 cycles ........................................... (Linear tapers) 2 %............................................. 2 %
(Audio tapers) ꢁ %............................................. ꢁ %
Moisture Resistance (MIL-STD-202, Method 10ꢁ, Condition B)
Total Resistance Shift................................... (Linear tapers) 10 % TRS maximum .................(All tapers) 5 % TRS maximum
(Audio tapers) 20 % TRS maximum
Insulation Resistance (500 VDC).................. 100 megohms minimum ......................................100 megohms minimum
IP Rating............................................................. IP 40 .....................................................................IP 40
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
1
Mechanical Characteristics
Stop Strength (1/4 ” D shaft) .............................................................................................................................................45.19 N-cm (4 lb.-in.)
(1/8 ” D shaft) .............................................................................................................................................33.89 N-cm (3 lb.-in.)
Mechanical Angle.................................................................................................................................................................................300 ° 5 °
Torque
Starting........................................................................................................................................... 0.3 max. above average running torque
Running Torque
Single or Dual Section (A & R Bushings)..................................................................................................0.21 to 1.06 N-cm (0.3 to 1.5 oz.-in.)
Single or Dual Section (C & U Bushings)..................................................................................................0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Mounting .............................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Variation...................................................................................................................... 0.35 N-cm (0.5 oz.-in.) maximum in 45 ° shaft travel
Weight (Single Section, Metal Bushing)...............................................................................................................................12.7 grams nominal
(Each Additional Section)....................................................................................................................................................4 grams nominal
Terminals.................................................................................................................................Printed circuit terminals, J-Hooks or solder lugs
Soldering Condition ...........................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking ..................................................................................Manufacturer’s trademark, date code, resistance, manufacturer’s part number
Ganging (Multiple Section Potentiometers).............................................................................................................................2 cups maximum
Hardware...................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
NOTE: Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1
At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
1
Initial Electrical Characteristics
Contacts:
DPST ........................................................................................................................................................N.O/N.O., N.C./N.C. or N.O./N.C.
DPDT ..........................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ..................................................................................... 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT .....................................................................................................................................1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Contact Resistance (0.1 VDC-10 mA)...............................................................................................................................10 milliohms nominal
Contact Bounce...........................................................................................................................................................5 milliseconds maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level........................................................................................................................................................................1500 VAC minimum
Insulation Resistance................................................................................................................................................. 1000 megohms minimum
1
Environmental Characteristics
Operating Temperature Range .................................................................................................................................................... 0 °C to +70 °C
Exposure Temperature Range ................................................................................................................................................-65 °C to +125 °C
Vibration (Dual Section).................................................................................................................................................................................. 8 G
Contact Resistance.................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section).................................................................................................................................................................................... 20 G
Contact Resistance.................................................................................................................................................. 10 milliohms maximum
Contact Bounce ................................................................................................................................................... 0.1 millisecond maximum
Rotational Life................................................................................................................................................................................25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load)........................................................... 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance................................................................................................................................................ 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ..................................................................................................................... 10 milliohms maximum
Insulation Resistance (After 24 Hours @ Room Temperature) (500 VDC)..............................................................100 megohms minimum
Housing Material.......................................................................................................High temperature, flame retardant, thermosetting plastic
1
Mechanical Characteristics
Actuating Torque (Each Section, Switch Module Only)..............................................................................3.53 to 10.59 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly) .............................................................................0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent................................................................................................................................................................................CW or CCW standard
Actuation Angle......................................................................................................................................................................................20 ° 5 °
Contact Materials.................................................................................................................................................... Fine silver with gold overlay
Terminal Styles.............................................................................................................................................................................Solder lug only
Standard Orientation........................................................................................................................................ In-line with control terminals
Optional....................................................................................................................................................Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure).................................................................................... 0.9 kg (2 lbs.) minimum
NOTE: Performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1
At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Product Dimensions
Model 97 PC Pin Terminals, “L” Pattern
MOUNTING
SURFACE
15.ꢁꢁ
(.6ꢀ5)
DIA.
1ꢂ.7ꢀ 0.ꢂꢁ
(.540 .015)
L
1ꢀ.70 .ꢀꢀ9
(.500 .009)
0.79 .0ꢀ5
7.9ꢀ
(.ꢂ1ꢀ)
1.ꢂ7 0.0ꢁ
(.054 .00ꢂ)
ꢀ.ꢂ6 0.0ꢁ
(.09ꢂ .00ꢂ)
(.0ꢂ1 .010)
SEE
1.19
(.047)
“A” STYLE
A.R. LUG
9.5ꢂ
(.ꢂ75)
HOW TO ORDER
R
CHART FOR
BUSHING OPTIONS.
1ꢀ.7 1.0ꢀ
(.500 .040)
5.0ꢁ 0.ꢂꢁ
DIA.
0.ꢁ1
(.0ꢂꢀ)
(.ꢀ00 .015)
11.05 0.ꢀ0
(.4ꢂ5 .00ꢁ)
TYP.
ꢀ.54
(.100)
0.76 0.05
(.0ꢂ0 .00ꢀ)
TYP.
R1
ꢀ.54
(.100)
SEE
1
ꢂ
NEXT PAGE
FOR SHAFT
OPTIONS.
ꢀ
Model 99 Solder Lug Terminals, "Triangular" Pattern
5.0ꢁ 1.0ꢀ
(.ꢀ00 .040)
5.59 .ꢀ0
(.ꢀꢀ0 .00ꢁ)
ꢀ.0ꢂ
(.0ꢁ0)
ꢂ PLCS.
.41
(.016)
ꢀ.54
(.100)
4.45 .ꢂꢁ
(.175 .015)
ꢀ.54
(.100)
ꢀ.ꢀ9
(.090)
ꢂ PLCS.
1.0ꢀ
(.040)
WIDE X
LONG
.ꢂꢁ1
(.015 )
.XX
TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX
FRACTION 1ꢃ64
9.65
ANGLE 5 ꢄ
(.ꢂꢁ)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Product Dimensions
Model 97
(2nd Cup - Switch)
Horizontal Term.
(Switch Types R57, R59, R61, R73)
15.88
(.625)
REF.
2.77 .38
(.109 .015)
MOUNTING
SURFACE
18.42 0.38
(.725 .015)
3
1
15.88
(.625)
L
3
1
4
5
6
2
8.74 0.25
(.344 .010)
16.89 .51
(.665 .020)
15.88 0.38
(.625 .015)
4
5
6 2
2.41 X 1.14
(.095 .045)
SLOT 6 PLCS
2.54
2 PLCS.
(.100)
2.29
(.090)
2.54 0.25
(.100 .010)
6 PLCS.
2 PLCS.
8.26 0.25
(.325 .010)
2.77 .38
(.109 .015)
Model 99
(2nd Cup - Switch)
Switch Module Variations
Shaft Flat Orientation
MOUNTING
SURFACE
1
CCW
3
120 ꢀ 5 ꢀ STD.
FLAT ORIENTATION
(SHAFT AT CCW END)
24.77 .51
(.975 .020)
15.88
(.625)
REF.
2
2.77 .38
(.109 .015)
POTENTIOMETER
3
1
L
TOTAL ROTATION 300 ꢀ
CCW DETENT
25 ꢀ MAX.
ACTUATION
ANGLE
(TYPES 51,
53, 55, 57, 59,
61, 71, 73)
CW DETENT
25 ꢀ MAX.
ACTUATION ANGLE
(TYPES 50, 52, 54,
56, 58, 60, 70, 72)
5.59 .38
(.022 .015)
4
5
6
2
2.41 X 1.14
(.095 .045)
SLOT 6 PLCS
16.89 .51
(.665 .020)
NOTE: Switch terminals shown in vertical position.
4
4
4
3
1
3
3
1
4
2
3
1
5
6
2
1
1
2
2
DPST (NO/NC)
(TYPES 50, 51, 56, 57)
DPST (NC/NC)
2
3
DPST (NO/NO)
(TYPES 52, 53, 58, 59)
DPDT (NC/NC)
2.29
(.090)
(TYPES 54, 55, 60, 61)
6 PLCS.
(TYPES 70, 71, 72, 73)
Switch contacts shown in detent position.
4.45 .38
2.77 .38
(.175 .015)
(.109 .015)
.381
(.015 )
.XX
MM
(INCHES)
TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX
FRACTION 1/64
DIMENSIONS:
9.65
ANGLE 5 ꢀ
(.38)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Model 97 & 99 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Product Dimensions
Plastic
Shaft
Styles
SHAFT TYPE "B" (USES BUSHING A)
SHAFT TYPE "D" (USES BUSHING C)
SHAFT TYPE "T" (USES BUSHING U)
1.60+.38/-.00
(.063+.015/-.000)
13.16+.00/-.15
DIA.
1.50 .ꢀ5
(0.06 .001)
(.1ꢀ45+.000/-.006)
6.3ꢀ+.000/-.15ꢀ
3.988 +0.000/-0.051
(.157 +.000/-.00ꢀ)
DIA.
.79
(0.03)
1.19
(.047)
(.ꢀ49+.000/.006)
STD. LENGTHS:
DIA.
STD. LENGTHS:
1ꢀ.70
15.88
19.05
STD. LENGTHS:
15.88
(.500) (.6ꢀ5) (.750)
16.0
(.630) (.866)
ꢀꢀ.0
1ꢀ.70
19.05
ꢀꢀ.ꢀ3
(.500) (.6ꢀ5) (.750) (.875)
SHAFT TYPE "C" (USES BUSHING A)
SHAFT TYPE "R" (USES BUSHING R)
SHAFT TYPE "W" (USES BUSHING A)
11.18 .38
(.440 .015)
14.ꢀ7 .ꢀ5
(.56ꢀ .010)
1.80 .ꢀ5
(0.07 .001)
5.994 +0.000/-0.051
(.ꢀ36 +.000/-.00ꢀ)
DIA.
6.31+.0ꢀ5/-.051
(.ꢀ485+.001/.00ꢀ)
DIA.
6.30+.000/-.15ꢀ
5.49
(.ꢀ16)
1.00
(.04)
48 TOOTH
(.ꢀ48+.000/.006)
DIA.
STD. LENGTHS:
STD. LENGTHS:
STD. LENGTHS:
ꢀ5.40
(1.00)
16.0
(.630) (.866)
ꢀꢀ.0
19.05
(.750) (.875)
ꢀꢀ.ꢀ3
Metal
Shaft
Styles
SHAFT TYPE "H" (USES BUSHING A)
SHAFT TYPE "A" (USES BUSHING A)
6.3ꢀ+.010/-.0ꢀ5
SHAFT TYPE "S" (USES BUSHING R)
“F” .38
(“F” .015)
“F” .381
(“F” .015)
6.3ꢀ+.010/-.0ꢀ5
6.000+.000/-.035
(.ꢀ490+.0004/.0010)
DIA
(.ꢀ490+.0004/.0010)
(.ꢀ36ꢀ+.0000/.0014)
DIA
DIA
5.486 .051
(.ꢀ16 .00ꢀ)
3.988 .076
(.157 .003)
STD. LENGTHS:
15.88 19.05 ꢀꢀ.ꢀ3
(.500) (.6ꢀ5) (.750) (.875)
STD. LENGTHS:
STD. LENGTHS:
19.05 ꢀꢀ.ꢀ3
1ꢀ.70
ꢀ5.4
(1.000)
19.05
ꢀꢀ.ꢀ3
(.750) (.875)
(.750) (.875)
FLAT LENGTH “F”:
FLAT LENGTH “F”:
9.98
(.393)
1ꢀ.98
(.511)
7.95
(.313) (.438)
11.13
SHAFT TYPE "E" (USES BUSHING C)
0.79 0.ꢀ5
3.16
(.031 .010)
(.1ꢀ45)
DIA
SHAFT TYPE "J" (USES BUSHING R)
SHAFT TYPE "V" (USES BUSHING U)
0.79
(.031)
1.80 0.ꢀ5
(.071 .010)
6.00+.000/-.035
(.ꢀ36ꢀ+.0000/.0010)
DIA
1.50 0.ꢀ5
(.059 .010)
3.99+.000/-.035
(.1571+.0000/.0010)
STD. LENGTHS:
DIA
1ꢀ.0
16.0
19.0
1.00 0.13
(.039 .054)
(.500) (.6ꢀ5) (.750)
0.79 0.13
(.031 .054)
STD. LENGTHS:
STD. LENGTHS:
19.05 ꢀꢀ.ꢀ3
(.750) (.875)
16.0
ꢀꢀ.0
(.630) (.866)
SHAFT TYPE "G" (USES BUSHING A)
1.60+.38/-.00
(.063+.015/-.000)
6.3ꢀ+.010/-.0ꢀ5
(.ꢀ490+.0004/.0010)
DIA.
.0ꢀ
(.050)
TOLERANCES EXCEPT AS SHOWN: .XX =
1.194
(.047)
.005
.XXX =
(.1ꢀ7)
.0005
(.01ꢀ7)
.XXXX =
STD. LENGTHS:
15.88 19.05
(.500) (.6ꢀ5) (.750) (.875)
1ꢀ.70
ꢀꢀ.ꢀ3
MM
DIMENSIONS:
(INCHES)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
How to Order Model 97 & 99 Panel Controls
9 9
A
2
A
-
B
2 8
-
A
1 5
/
R51
L
RoHS IDENTIFIER
Compliant
Blank Non-Compliant
ANTI-ROTATION LUG
Single .305 ” (7.8 mm) R,
90 °CW
SHAFT
LENGTH
(FMS)
AVAILABLE
ONLY IN
BUSHING
Code
L
A
D
Code Description
No Lug
16
20
24
28
32
1/2 ”L
5/8 ”L
3/4 ”L
7/8 ”L
1 ”L
A, C
A, C
A, C
A
SWITCH TYPE
(R50) DPST N.O./N.C. CW Detent In-Line Term
(R51) DPST N.O./N.C. CCW Detent In-Line Term
(R52) DPST N.O./N.O. CW Detent In-Line Term
(R53) DPST N.O./N.O. CCW Detent In-Line Term
(R54) DPST N.C./N.C. CW Detent In-Line Term
(R55) DPST N.C./N.C. CCW Detent In-Line Term
(R57) DPST N.O./N.C. CCW Detent Horz Term
(R59) DPST N.O./N.O. CCW Detent Horz Term
(R61) DPST N.C./N.C. CCW Detent Horz Term
(R70) DPDT CW Detent In-Line Term
# SECTIONS
Dual
A
METRIC
2
2nd Section is a Switch
16
22
16 mmL
22 mmL
R
R
BUSHING
A
C
R
Metal Plain 3/8 ” (9.53 mm) D x 3/8 ” (9.53 mm) L
Metal Plain 1/4 ” (6.35 mm) D x 1/4 ” (6.35 mm) L
Metal Plain 10 mm D x 9 mm L
(R71) DPDT CCW Detent In-Line Term
(R73) DPDT CCW Detent Horz Term
MODEL
97 Single-Turn, L-Pattern PC Pins w/Switch
99 Single-Turn, Triangle-Pattern
Solder Lugs w/Switch
ELEMENT TAPER
TYPE/TOLERANCE
RESISTANCE CODE
VALUE IN OHMS
(A)
(H)
Linear Cermet 10 ꢀ
Linear Cermet 5 ꢀ
(05) - 100
(28) - 150
(06) - 200
(07) - 250
(08) - 500
(10) - 1 K
(11) - 2 K
(30) - 15 K
(16) - 20 K
(17) - 25 K
(18) - 50 K
(20) - 100 K
(21) - 200 K
(22) - 250 K
AVAILABLE ONLY IN
SHAFT TYPE
LENGTHS
(CODE)
BUSHINGS
(CODE)
(12) - 2.5 K (23) - 500 K
B
C
D
R
T
W
A
E
G
H
J
Plastic Single Slotted 1/4 " (6.35 mm) D
Plastic Single Flatted 1/4" (6.35 mm) D
Plastic Single Plain 1/8" (3.18 mm) D
Plastic Single Slotted 6 mm D
16, 20, 24, 28
24, 28
16, 20, 24
Metric 16, 22
Metric 16, 22
32
16, 20, 24
16, 20, 24
16, 20, 24, 28
24, 28
Metric16, 22
Metric 16, 22
Metric 16, 22
A
A
C
R
U
A
A
C
A
A
R
R
U
(13) - 5 K
(15) - 10 K
(10) - 1 K
(25) - 1 M
(B)
(E)
Linear C-P 20 ꢀ
Linear C-P 10 ꢀ
(18) - 50 K
(12) - 2.5 K (20) - 100 K
(13) - 5 K (22) - 250 K
(15) - 10 K (23) - 500 K
(16) - 20 K (25) - 1 M
(17) - 25 K
Plastic Single Slotted 4 mm D
Plastic Single Knurled 1/4" (6.35 mm) D
Metal Single Plain 1/4" (6.35 mm) D
Metal Single Slotted 1/8" (3.18 mm) D
Metal Single Slotted 1/4" (6.35 mm) D
Metal Single Flatted 1/4" (6.35 mm) D
Metal Single Slotted 6 mm D
(C)
(D)
(F)
(G)
(S)
(T)
CW Audio Cermet 10 ꢀ
CW Audio C-P 20 ꢀ
(10) - 1 K
(12) - 2.5 K (20) - 100 K
(22) - 250 K
(18) - 50 K
CCW Audio Cermet 10 ꢀ (13) - 5 K
CCW Audio C-P 20 ꢀ
CW Audio C-P 10 ꢀ
CCW Audio C-P 10 ꢀ
(15) - 10 K (23) - 500 K
(17) - 25 K (25) - 1 M
S
V
Metal Single Flatted 6 mm D
Metal Single Slotted 4 mm D
Boldface features are Bourns standard options.
All others are available with higher minimum order
quantities.
REV. 07 /11
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
相关型号:
97C2A-E16-B20/R55
Potentiometer, Conductive Plastic, 0.5W, 100000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6398,
BOURNS
97C2D-D16-G12/R61L
Potentiometer, Conductive Plastic, 0.25W, 2500ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6398,
BOURNS
97C2D-D20-B25/R70
Potentiometer, Conductive Plastic, 0.5W, 1000000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6398,
BOURNS
97C2D-D24-B18/R55
Potentiometer, Conductive Plastic, 0.5W, 50000ohm, 20% +/-Tol, -1000,1000ppm/Cel, 6398,
BOURNS
©2020 ICPDF网 联系我们和版权申明