AA85A10 [BOURNS]
Formerly KOMATSULITE a product;
| 型号： | AA85A10 |
| 厂家： | 
BOURNS ELECTRONIC SOLUTIONS |
| 描述： | Formerly KOMATSULITE a product |
| 文件： | 总5页 (文件大小：469K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
Applications
Batteryꢀcellꢀprotectionꢀfor:
nꢀ NotebookꢀPCs
nꢀ TabletꢀPCs
™
nꢀ Formerlyꢀaꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀproduct
nꢀ MiniatureꢀThermalꢀCutoffꢀ(TCO)ꢀdeviceꢀ
nꢀ Highꢀcurrentꢀcapacity,ꢀlowꢀimpedance
nꢀ Overtemperatureꢀandꢀovercurrentꢀprotectionꢀ nꢀ Smartꢀphones
forꢀlithiumꢀpolymerꢀandꢀprismaticꢀcells
nꢀ Controlsꢀabnormal,ꢀexcessiveꢀcurrentꢀ
virtuallyꢀinstantaneously,ꢀupꢀtoꢀratedꢀlimits
A
5
1
B
A
2
0
ꢀ
8
1
5
6
A
M
0
0
ꢀ
nꢀ Wideꢀrangeꢀofꢀtemperatureꢀoptions
ꢀꢀAAꢀSeriesꢀBreakerꢀ(ThermalꢀCutoffꢀDevice)
Ratings
Specification
AA72AB0
AA77AB0
AA82AB0
AA85AB0
Trip Temperature
72 °C ± 5 °C
77 °C ± 5 °C
82 °C ± 5 °C
85 °C ± 5 °C
Reset Temperature
Contact Rating
40 °C min.
DC9 V / 35 A, 1000 cycles
DC5 V / 60 A, 100 cycles
DC28 V / 35 A, 100 cycles
200 mA max. @ 25 °C
2 milliohms max.
Maximum Breaking Current
Maximum Voltage
Maximum Leakage Current
Resistance
Agency Recognition
Product Dimensions
Description
NOꢀOBJECT
2.7ꢀ ꢀ0.1
(.106ꢀ ꢀ.004)
6.95ꢀ ꢀ0.1
(.274ꢀ ꢀ.004)
File Number: E215638
(UL 60730)
UL, cUL
TUV
2.7ꢀ ꢀ0.1
(.106ꢀ ꢀ.004)
0.2
MAX.
(.008)
File Number: R50350207
(EN 60730-2-9)
How to Order
AA 77 A B 0
0.7ꢀ ꢀ0.1
(.028ꢀ ꢀ.004)
0.7ꢀ ꢀ0.1
(.028ꢀ ꢀ.004)
Series Designator
2.5ꢀ ꢀ0.1
(.098ꢀ ꢀ.004)
2.5ꢀ ꢀ0.1
(.098ꢀ ꢀ.004)
3.75ꢀ ꢀ0.1
(.148ꢀ ꢀ.004)
3.95
Trip Temperature (±5 °C)
ꢀ
ꢀ
ꢀ
ꢀ
•ꢀ72
•ꢀ77
•ꢀ82
•ꢀ85
MAX.
(.156)
Arm Material
A = Cu Alloy High Current Type
0.2ꢀ ꢀ0.01
0.2ꢀ ꢀ0.01
(.008ꢀ ꢀ.0004)
(.008ꢀ ꢀ.0004)
Terminal Type
1 = With Projection
B = Without Projection
0.1
(.004)
Manufacturer’sꢀInternalꢀCode
0.37ꢀ ꢀ0.1
(.015ꢀ ꢀ.004)
1.22ꢀ ꢀ0.05
(.048ꢀ ꢀ.002)
4ꢀPLCS.
0.37ꢀ ꢀ0.1
(.015ꢀ ꢀ.004)
0.5
(.004)
DIA.
REF.
4ꢀPLCS.
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
0.15
(.006)
R
1.8ꢀ ꢀ0.1
(.071ꢀ ꢀ.004)
REF.
2.65ꢀ ꢀ0.1
(.104ꢀ ꢀ.004)
REF.
*ꢀ RoHSꢀDirectiveꢀ2002/95/ECꢀJan.ꢀ27,ꢀ2003ꢀincludingꢀannexꢀandꢀRoHSꢀRecastꢀ2011/65/EUꢀJuneꢀ8,ꢀ2011.ꢀ
**ꢀ Bournsꢀconsidersꢀaꢀproductꢀtoꢀbeꢀ“halogenꢀfree”ꢀifꢀ(a)ꢀtheꢀBromineꢀ(Br)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀ(b)ꢀtheꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀandꢀ(c)ꢀtheꢀtotalꢀBromineꢀ(Br)ꢀꢀ
andꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ1500ꢀppmꢀorꢀless.
ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Theꢀdeviceꢀcharacteristicsꢀandꢀparametersꢀinꢀthisꢀdataꢀsheetꢀcanꢀandꢀdoꢀvaryꢀinꢀdifferentꢀapplicationsꢀandꢀactualꢀdeviceꢀperformanceꢀmayꢀvaryꢀoverꢀtime.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.
ꢀ
AAꢀSeriesꢀBreakerꢀ(ThermalꢀCutoffꢀDevice)
ꢀ
Typical Performance
Current vs. Temperature Curves
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
AA72AB0ꢀ(Low 67 °C average)
AA77AB0ꢀ(Low 72 °C average)
AA82AB0ꢀ(Low 77 °C average)
AA85AB0ꢀ(Low 80 °C average)
13
12
11
10
9
8
7
6
5
4
3
2
1
0
20
30
40
50
60
70
80
Temperature (°C)
Theꢀaboveꢀcurvesꢀwereꢀderivedꢀfromꢀplacingꢀtestꢀsamplesꢀinꢀanꢀovenꢀatꢀ25ꢀ℃,ꢀ40ꢀ℃,ꢀ60ꢀ℃ꢀandꢀ70℃,ꢀincreasingꢀcurrentꢀflowꢀthroughꢀtheꢀ
sampleꢀatꢀaꢀrateꢀofꢀ0.1ꢀA/minuteꢀandꢀrecordingꢀtheꢀcurrentꢀvalueꢀwhenꢀtheꢀsampleꢀtrips.
Product Structure
Circuit Diagram
CIRCUITꢀ
AFTERꢀOPENING
ARM
COVER
TERMINAL
NORMALꢀCIRCUIT
BASEꢀ
COVERꢀ
PLATE
ARMꢀ
TERMINALꢀꢀ
PROJECTION
BASE
PTC
CONTACT
BIMETALꢀ
DISC
ꢀPROJECTION
AVAILABLEꢀWITHꢀANDꢀWITHOUTꢀPROJECTIONS.
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Theꢀdeviceꢀcharacteristicsꢀandꢀparametersꢀinꢀthisꢀdataꢀsheetꢀcanꢀandꢀdoꢀvaryꢀinꢀdifferentꢀapplicationsꢀandꢀactualꢀdeviceꢀperformanceꢀmayꢀvaryꢀoverꢀtime.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.
2)
Avoidꢀstorageꢀlocationsꢀwhereꢀthereꢀisꢀaꢀpossibilityꢀofꢀgeneratingꢀcorrosiveꢀgasꢀ
suchꢀasꢀfromꢀsaltꢀbreeze,ꢀchlorine,ꢀhudrogenꢀsulfide,ꢀammonium,ꢀsulfide-oxidation,
hydrogenꢀchloride,ꢀacetate,ꢀetc.
........................................... -30 ~ 100 °C
1)
Theꢀbreakerꢀmustꢀbeꢀstoredꢀinꢀtheꢀoriginalꢀpackagingꢀ(plasticꢀbagꢀorꢀcarton)ꢀwithꢀ
theꢀfollowingꢀconditions:ꢀambientꢀtemperatureꢀofꢀ-10ꢀtoꢀ+40ꢀ°C,ꢀRHꢀ<75ꢀ%ꢀwithꢀnoꢀ
radicalꢀtemperatureꢀchange,ꢀdirectꢀsunshine,ꢀexcessiveꢀvibrationꢀorꢀshock.
ꢀ
AAꢀSeriesꢀBreakerꢀ(ThermalꢀCutoffꢀDevice)
ꢀ
Wiring Recommendations
Thisꢀisꢀnotꢀaꢀsurfaceꢀmountꢀdeviceꢀforꢀreflowꢀsoldering.ꢀTherefore,ꢀNiꢀtabꢀwiringꢀshouldꢀbeꢀaccomplishedꢀbyꢀeitherꢀresistanceꢀorꢀlaserꢀwelding.ꢀ
Solderꢀconnectionsꢀshouldꢀbeꢀavoided.
Typical Part Marking
DATEꢀCODE:
MONTHꢀ(1~9,ꢀX,ꢀY,ꢀZ)
DATE
YEAR
MACHINEꢀNO.
ROMANꢀNUMERALꢀ(I,ꢀII,ꢀIII,ꢀETC.)ꢀor
ARABICꢀNUMERALꢀ(1,ꢀ2,ꢀ3,ꢀETC.)ꢀ=ꢀOKAYAMAꢀFACTORY
ALPHABETꢀ=ꢀSHIGAꢀFACTORY
X2715A
AA77A10
02
SERIESꢀDESIGNATOR
MANUFACTURER’SꢀTRADEMARK
SPECIALꢀSPECIFICATIONSꢀCODE
TERMINALꢀTYPE
TRIPꢀTEMPERATUREꢀ-ꢀ°C
(72,ꢀ77,ꢀ82,ꢀ85)
ARMꢀMATERIAL
(Aꢀ=ꢀCuꢀALLOY)
MANUFACTURER’S
INTERNALꢀCODE
(ALPHANUMERICꢀCHARACTER)
Standard Packaging Specifications
Plastic Bag.......................................................................................................................................................................1,000ꢀpcs.ꢀ(fixed)
InnerꢀBox .........................................................................................................................................................................3,000ꢀpcs.ꢀ(fixed)
Outer Box ....................................................................................................................................30,000 pcs. max. (up to 10 inner boxes)
Application Temperature Range
Storage Conditions
ꢀ
3)ꢀꢀ Storageꢀperiodꢀshouldꢀbeꢀnoꢀlongerꢀthanꢀ24ꢀmonthsꢀfromꢀdateꢀofꢀshipment.
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Theꢀdeviceꢀcharacteristicsꢀandꢀparametersꢀinꢀthisꢀdataꢀsheetꢀcanꢀandꢀdoꢀvaryꢀinꢀdifferentꢀapplicationsꢀandꢀactualꢀdeviceꢀperformanceꢀmayꢀvaryꢀoverꢀtime.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.
ꢀ
AAꢀSeriesꢀBreakerꢀ(ThermalꢀCutoffꢀDevice)
ꢀ
Caution when using Breaker
Beforeꢀusingꢀtheꢀbreaker,ꢀpleaseꢀfullyꢀreadꢀtheꢀDESIGN AND HANDLING CAUTIONSꢀstatedꢀbelowꢀtoꢀavoidꢀbreakerꢀperformanceꢀdeteriorationꢀ
and/orꢀdamageꢀtoꢀtheꢀbreakerꢀbodyꢀorꢀterminal.
DESIGN CAUTIONS
ꢀꢀ1.ꢀ Useꢀwithinꢀtheꢀelectricalꢀratingsꢀspecifiedꢀinꢀthisꢀdataꢀsheet.ꢀIfꢀusedꢀoverꢀtheꢀratingꢀofꢀvoltageꢀorꢀcurrent,ꢀON-OFFꢀlifeꢀmightꢀbeꢀimpactedꢀ
ꢀ
andꢀcontactꢀmayꢀdeteriorateꢀdueꢀtoꢀbreakerꢀarmꢀdamage.
ꢀꢀ2.ꢀ Ifꢀusedꢀoverꢀtheꢀelectricalꢀrating,ꢀtheꢀcircuitꢀmayꢀnotꢀopenꢀsafelyꢀorꢀoperateꢀproperly.ꢀPleaseꢀtestꢀyourꢀdeviceꢀforꢀanyꢀabnormalitiesꢀandꢀ
ꢀ
confirmꢀthatꢀtheꢀbreakerꢀwillꢀopenꢀtheꢀcircuitꢀsafelyꢀinꢀyourꢀdevice.
ꢀꢀ3.ꢀ Mountꢀtheꢀbreakerꢀonꢀyourꢀdeviceꢀwhereꢀheatꢀisꢀtheꢀhighestꢀinꢀorderꢀtoꢀtransferꢀitꢀeffectivelyꢀtoꢀtheꢀbreaker.ꢀ
ꢀꢀ4.ꢀ Ifꢀtheꢀbreakerꢀisꢀaffixedꢀwithꢀanꢀadhesiveꢀ(resin,ꢀetc.),ꢀfullyꢀtest,ꢀevaluateꢀandꢀverifyꢀthatꢀtheꢀadhesiveꢀpresentsꢀnoꢀnegativeꢀeffectsꢀonꢀtheꢀ
ꢀ
breakerꢀbeforeꢀproceeding.
ꢀꢀ5.ꢀ Afterꢀtheꢀbreakerꢀisꢀmounted,ꢀaffixꢀitꢀsoꢀthatꢀtheꢀbreakerꢀbodyꢀandꢀterminalsꢀwillꢀnotꢀmove.ꢀIfꢀnotꢀaffixedꢀproperly,ꢀbreakerꢀresistanceꢀcould
ꢀ
increaseꢀorꢀcontactꢀcouldꢀopenꢀdueꢀtoꢀstressꢀduringꢀhandlingꢀorꢀvibration/shockꢀduringꢀtransportation.
ꢀꢀ6.ꢀ Mountꢀtheꢀbreakerꢀbodyꢀandꢀterminalsꢀinꢀaꢀstraightꢀandꢀflatꢀdirection.ꢀIfꢀtheꢀbodyꢀandꢀterminalsꢀareꢀmountedꢀinꢀaꢀtwistedꢀcondition,ꢀbreakerꢀ
ꢀ
resistanceꢀcouldꢀincreaseꢀorꢀcreateꢀbodyꢀdamage.
ꢀꢀ7.ꢀ Ifꢀbreakerꢀisꢀtoꢀbeꢀresin-molded,ꢀtestꢀandꢀevaluateꢀtheꢀapplicationꢀtoꢀdetermineꢀwhetherꢀtheꢀbreakerꢀcanꢀbeꢀusedꢀeffectively.
ꢀꢀ8.ꢀ TheꢀbreakerꢀcannotꢀbeꢀusedꢀasꢀaꢀrepetitiveꢀON-OFFꢀthermostat.
9. The breaker is not washable. Do not wash.
10.ꢀꢀTheꢀbreakerꢀisꢀnotꢀdesignedꢀorꢀwarrantedꢀforꢀflow,ꢀreflowꢀorꢀhand-solderingꢀapplications.ꢀIfꢀsuchꢀapplicationꢀisꢀrequired,ꢀyouꢀwillꢀneedꢀtoꢀ
ꢀ
evaluateꢀwhetherꢀtheꢀbreakerꢀisꢀsuitableꢀforꢀyourꢀspecificꢀapplication.
11.ꢀ Whenꢀmountingꢀandꢀafterꢀmountingꢀtheꢀbreaker,ꢀdoꢀnotꢀapplyꢀsupersonicꢀvibration.ꢀVibrationꢀandꢀheatꢀmayꢀcauseꢀbreakerꢀresistanceꢀ
ꢀ
ꢀ
toꢀincreaseꢀorꢀmayꢀcauseꢀbodyꢀdamage.ꢀIfꢀyouꢀplanꢀtoꢀapplyꢀsupersonicꢀvibrationꢀafterꢀmountingꢀtheꢀbreaker,ꢀyouꢀwillꢀneedꢀtoꢀevaluateꢀ
whetherꢀtheꢀbreakerꢀisꢀsuitableꢀforꢀyourꢀspecificꢀapplication.ꢀTheꢀbreakerꢀisꢀnotꢀdesignedꢀorꢀwarrantedꢀtoꢀwithstandꢀsupersonicꢀvibration.
12. Do not use the breaker in the following environments:
a) Water, oil, chemicals or organic solutions
ꢀ
ꢀ
b)ꢀ Directꢀsunlight,ꢀoutdoorꢀexposure,ꢀdust
c)ꢀ Dewꢀcondensation,ꢀallowingꢀtheꢀbreakerꢀtoꢀgetꢀwet
ꢀ
ꢀ
d)ꢀ Saltꢀbreeze,ꢀchlorine,ꢀhydrogenꢀsulfide,ꢀammonium,ꢀsulfide-oxidation,ꢀhydrogenꢀchloride,ꢀandꢀanywhereꢀthereꢀisꢀaꢀpossibilityꢀofꢀ
ꢀ
generatingꢀcorrosiveꢀgasꢀsuchꢀasꢀsulfurousꢀacidꢀgas
e) Strong static electric charge or electromagnetic wave
13.ꢀ Theꢀbreakerꢀisꢀnotꢀdesignedꢀorꢀtestedꢀfor,ꢀandꢀshouldꢀnotꢀbeꢀusedꢀin,ꢀaerospace,ꢀairplane,ꢀnuclear,ꢀmilitary,ꢀlife-sustainingꢀmedicalꢀandꢀ
ꢀ
otherꢀrelatedꢀapplications.
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Theꢀdeviceꢀcharacteristicsꢀandꢀparametersꢀinꢀthisꢀdataꢀsheetꢀcanꢀandꢀdoꢀvaryꢀinꢀdifferentꢀapplicationsꢀandꢀactualꢀdeviceꢀperformanceꢀmayꢀvaryꢀoverꢀtime.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.
ꢀ
AAꢀSeriesꢀBreakerꢀ(ThermalꢀCutoffꢀDevice)
ꢀ
Caution when using Breaker (Continued)
HANDLING CAUTIONS
1.ꢀ Sinceꢀtheꢀbreakerꢀbodyꢀisꢀcomposedꢀofꢀplasticꢀparts,ꢀdoꢀnotꢀclampꢀorꢀdentꢀwithꢀtoolsꢀasꢀthisꢀcouldꢀcauseꢀaꢀresistanceꢀincreaseꢀorꢀbodyꢀ
ꢀ
damage.
2.ꢀ Breakerꢀterminalsꢀareꢀthinꢀcopper-alloyꢀwithꢀrightꢀangleꢀedges.ꢀHandleꢀcarefullyꢀtoꢀavoidꢀinjuryꢀtoꢀfingers.ꢀHandlingꢀwhileꢀwearingꢀfingerꢀ
ꢀ
cotsꢀandꢀusingꢀtweezersꢀisꢀrecommended.
3.ꢀ WhenꢀweldingꢀbreakerꢀterminalsꢀorꢀmountingꢀtheꢀbreakerꢀonꢀaꢀcellꢀorꢀPCMꢀboard,ꢀbeꢀcarefulꢀtoꢀavoidꢀplacingꢀexcessiveꢀstressꢀonꢀthe
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
breakerꢀbodyꢀandꢀterminals.ꢀExcessiveꢀstressꢀmayꢀcauseꢀaꢀresistanceꢀincreaseꢀorꢀbodyꢀdamage.ꢀPleaseꢀreferꢀtoꢀtheꢀfollowingꢀcautions:
a)ꢀ Doꢀnotꢀapplyꢀmoreꢀthanꢀ10ꢀNꢀmomentꢀtoꢀtheꢀbreakerꢀbodyꢀ(referꢀtoꢀFigureꢀ1)
b)ꢀ Doꢀnotꢀapplyꢀmoreꢀthanꢀ1.5ꢀcN-mꢀtwistꢀtorqueꢀtoꢀtheꢀbreakerꢀbodyꢀ(referꢀtoꢀFigureꢀ2)
c)ꢀ Doꢀnotꢀapplyꢀmoreꢀthanꢀ20ꢀNꢀbendingꢀforceꢀtoꢀtheꢀbreakerꢀbodyꢀ(referꢀtoꢀFigureꢀ3)
d)ꢀ Doꢀnotꢀapplyꢀmoreꢀthanꢀ2.0ꢀcN-mꢀtwistꢀtorqueꢀtoꢀtheꢀbreakerꢀterminalsꢀ(referꢀtoꢀFigureꢀ4)
e) Do not apply more than 2 N force to the breaker terminals (refer to Figure 5)
f)ꢀ Doꢀnotꢀbendꢀterminalsꢀmoreꢀthanꢀ45ꢀ°ꢀatꢀrootꢀ(referꢀtoꢀFigureꢀ6)
ꢀ
ꢀ
g)ꢀ Doꢀnotꢀtwistꢀterminalsꢀmoreꢀthanꢀ10ꢀ°ꢀwithꢀtheꢀbreakerꢀbodyꢀaffixed.
4.ꢀ Inꢀbreakerꢀbodyꢀwelding,ꢀnormallyꢀthereꢀisꢀdirectꢀweldingꢀ(Figureꢀ7)ꢀandꢀseriesꢀweldingꢀ(Figureꢀ8).ꢀInꢀeitherꢀcase,ꢀuseꢀaꢀsuitableꢀjigꢀsoꢀthat
stressꢀwillꢀnotꢀexceedꢀtheꢀlimitsꢀstatedꢀabove.
ꢀ
5.ꢀ Pull-and-detachꢀstrengthꢀofꢀtheꢀterminalꢀweldingꢀshouldꢀbeꢀtoꢀyourꢀownꢀspecification.ꢀIfꢀtheꢀweldingꢀresultꢀisꢀcontrolledꢀbyꢀresistance,ꢀ
ꢀ
measurementꢀshouldꢀbeꢀmadeꢀatꢀaꢀcloseꢀpointꢀtoꢀtheꢀbreakerꢀbodyꢀbyꢀ“DCꢀ4-pointꢀclipꢀmethod”ꢀusingꢀaꢀmilliohmꢀmeterꢀtoꢀensureꢀaccuracyꢀ
(refer to Figure 9).
6.ꢀ Avoidꢀputtingꢀexcessiveꢀstressꢀasꢀshownꢀaboveꢀinꢀ3-a)ꢀtoꢀ3-g)ꢀwhenꢀtheꢀjigꢀisꢀusedꢀforꢀwelding/additionalꢀprocessing.
7.ꢀ Confirmꢀtheꢀresistanceꢀvalueꢀafterꢀeachꢀtimeꢀanꢀadditionalꢀprocessꢀisꢀapplied.
Figure 4
Figure 1
Figure 2
Figure 3
Rod A
Rod B
Figure 7
Figure 6
Figure 8
Figure 5
Rod A
Rod B
45 °
45 °
45 °
45 °
Figure 9
Dueꢀtoꢀpossibleꢀupdatesꢀtoꢀsafetyꢀstandardsꢀandꢀotherꢀreasons,ꢀthereꢀmayꢀbeꢀchangesꢀinꢀ
specificationsꢀforꢀthisꢀdataꢀsheetꢀwithoutꢀpriorꢀnotification.ꢀTherefore,ꢀbeforeꢀdesign-inꢀforꢀ
yourꢀapplication,ꢀpleaseꢀcontactꢀusꢀforꢀtheꢀmostꢀup-to-dateꢀspecifications.
milliohm meter
11/16
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Theꢀdeviceꢀcharacteristicsꢀandꢀparametersꢀinꢀthisꢀdataꢀsheetꢀcanꢀandꢀdoꢀvaryꢀinꢀdifferentꢀapplicationsꢀandꢀactualꢀdeviceꢀperformanceꢀmayꢀvaryꢀoverꢀtime.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.
相关型号：
©2020 ICPDF网 联系我们和版权申明