CAY10-300J4LF [BOURNS]
RES ARRAY 4 RES 30 OHM 0804;
| 型号： | CAY10-300J4LF |
| 厂家： | 
BOURNS ELECTRONIC SOLUTIONS |
| 描述： | RES ARRAY 4 RES 30 OHM 0804 |
| 文件： | 总4页 (文件大小：756K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
nꢀ RoHSꢀcompliant*
nꢀ Paperꢀtapeꢀonꢀreelꢀforꢀautomaticꢀplacement
nꢀ 2/4ꢀisolatedꢀresistorsꢀinꢀanꢀ0404/0804ꢀsizeꢀ
ꢀ
package
nꢀ E24ꢀseriesꢀfromꢀ10ꢀohmsꢀtoꢀ1ꢀmegohm
nꢀ Convexꢀterminationꢀstyle
nꢀ Resistanceꢀtoleranceꢀ±±ꢀ%
nꢀ Suitableꢀforꢀallꢀtypesꢀofꢀsolderingꢀprocesses
Model CAY10 - Chip Resistor Array
Electrical Characteristics
Additional Information
Click these links for more information:
Characteristics
CAY10-xxxJ2
2
CAY10-xxxJ4
4
Number of Elements (Isolated)
Power Rating @ 70 °C per Resistor
Package Power Rating @ 70 °C
Resistance Tolerance
0.0625 W
0.125 W
0.0625 W
0.250 W
PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT
LIBRARY
±5 %
How To Order
CA Y 10 - 103 J 4 LF
Resistance Range (E24)
plus Zero-ohm Jumper
3 ohms - 1 megohm
Chip Arrays
Type
• Y = Convex
3 ohms ~ 9.1 ohms: ±500 ppm/°C
10 ohms ~ 1 megohm: ±200 ppm/°C
T.C.R.
Model
• 10 = 04 Package Width
Max. Overload Voltage
Max. Working Voltage
Operating Temp. Range
Rating Temperature
Packaging
50 V
25 V
Resistance Code
• <10 ohms: “R” represents decimal
point (example: 4R7 = 4.7 ohms).
• ≥10 ohms: First two digits are signifi-
cant, third digit represents number of
zeros to follow (example: 474 = 470k
ohms
-55 °C to +125 °C
+70 °C
• 000 = Zero-ohm Jumper
10,000 pieces per reel
Resistance Tolerance
• J = ±5 %
Performance Characteristics
Resistors
• 2 = 2 Resistors
• 4 = 4 Resistors
Requirement
Characteristics
Test Method
Terminations
• LF = Tin-plated (RoHS compliant)
Short Time Overload
Soldering Heat
±2 %
±1 %
Rated Voltage X 2.5, 5 seconds
260 °C ±5 °C, 10 seconds ±1 second
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
125 °C (30 minutes) - normal (15 minutes)
-30 °C (30 minutes) - normal (15 minutes)
(5)
Temperature Cycling
±1 %
Moisture Load Life
Load Life
±3 %
±3 %
1000 hours
1000 hours
Environmental Characteristics
Isolated Circuit
4
3
CAY10-xxxJ2
Moisture Sensitivity Level.........................1
ESD Classification (HBM).....................N/A
R
R
1
7
2
6
8
1
±
4
CAY10-xxxJ4
R
R
R
R
2
3
WARNING Cancer and Reproductive Harm - www.P6±Warnings.ca.gov
*RoHSꢀDirectiveꢀ201±/863,ꢀMarꢀ31,ꢀ201±ꢀandꢀAnnex.ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
Model CAY10 - Chip Resistor Array
Typical Part Marking
Derating Curve
70ꢀ°Cꢀ
12±ꢀ°Cꢀ
100
CAY10-xxxJ2
No part marking.
80
60
40
20
0
CAY10-xxxJ4
-±±
40 60
80 100 120 140 160
±5 % (E24)
AmbientꢀTemp.ꢀ(°C)
3 digits; first two digits are significant,
third digit is the number of zeroes to
follow.
Construction
472
Protective
Glass Overcoat
Examples: 472 = 4700 Ω = 4.7K Ω
000 = 0 Ω
Thick Film
Resistive Element
±1 % (E96)
4 digits; first three digits are significant,
fourth digit is the number of zeroes to
follow.
4701
Example: 4701 = 4700 Ω = 4.7K Ω
Termination
High Purity
Alumina
Substrate
Product Dimensions
CAY10-xxxJ4
CAY10-xxxJ2
0.33ꢀ±ꢀ0.10
(.013ꢀ±ꢀ.004)ꢀ
0.40ꢀ±ꢀ0.1±
(.016ꢀ±ꢀ.006)ꢀ
0.2±ꢀ±ꢀ0.10
(.010ꢀ±ꢀ.004)ꢀ
0.1±ꢀ±ꢀ0.10
(.006ꢀ±ꢀ.004)ꢀ
0.2±ꢀ±ꢀ0.10
(.010ꢀ±ꢀ.004)ꢀ
0.1±ꢀ±ꢀ0.10
(.006ꢀ±ꢀ.004)ꢀ
1.0ꢀ±ꢀ0.10
(.040ꢀ±.004)ꢀ
1.0ꢀ±ꢀ0.10
(.040ꢀ±.004)ꢀ
0.3±ꢀ±ꢀ0.10
(.014ꢀ±ꢀ.004)ꢀ
0.±ꢀ±ꢀ0.0±
(.020ꢀ±ꢀ.002)ꢀ
0.30ꢀ±ꢀ0.1±
(.012ꢀ±ꢀ.006)ꢀ
0.3±ꢀ±ꢀ0.10
(.014ꢀ±ꢀ.004)ꢀ
0.67ꢀ±ꢀ0.10
(.026ꢀ±ꢀ.004)ꢀ
2.0ꢀ±ꢀ0.10
(.079ꢀ±ꢀ.004)ꢀ
1.0ꢀ±ꢀ0.10
(.040ꢀ±ꢀ.004)ꢀ
Land Pattern
CAY10-xxxJ4
CAY10-xxxJ2
0.±0
(.020)ꢀ
0.±0
(.020)ꢀ
0.6±
(.026)ꢀ
0.±0
(.020)ꢀ
0.±0
(.020)ꢀ
1.±0
(.0±9)ꢀ
1.±0
(.0±9)ꢀ
0.40
(.016)ꢀ
0.30
(.012)ꢀ
0.3±
(.014)ꢀ
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
Model CAY10 - Chip Resistor Array
Soldering Profile for RoHS Compliant Chip Resistors and Arrays
27±
<1>
Maximumꢀofꢀ20ꢀsecondsꢀbetween
ꢀꢀꢀꢀꢀꢀꢀꢀ+2±±ꢀ°Cꢀandꢀ+260ꢀ°C
260ꢀ°Cꢀpeak
<1>
ꢀꢀꢀꢀꢀꢀ2±±ꢀ°C
22±
17±
12±
7±
220ꢀ°C
190ꢀ°C
60ꢀ-ꢀ90
seconds
RampꢀDown
6ꢀ°C/second
1±0ꢀ°C
60ꢀ-ꢀ120ꢀseconds
10ꢀsecondsꢀminimum
RampꢀUp
3ꢀ°C/secondꢀmaximum
2±
0
±0
100
1±0
200
2±0
300
Time (Seconds)
Packaging Dimensions
DIA.
1.7±ꢀ±ꢀ0.10
(.069ꢀ±ꢀ.004)ꢀ
2.0ꢀ±ꢀ0.±
(.079ꢀ±ꢀ.020)ꢀ
1.±0ꢀ±ꢀ.010
4.00ꢀ±ꢀ0.10
(.1±7ꢀ±ꢀ.004)ꢀ
0.4±ꢀ±ꢀ.010
(.018ꢀ±ꢀ.004)ꢀ
MAX.
13.0ꢀ±ꢀ0.2
(.±11ꢀ±ꢀ.008)ꢀ
(.0±9ꢀ+ꢀ.004)ꢀ
1.20ꢀ±ꢀ0.10
(.047ꢀ±ꢀ.004)ꢀ
CAY10-xxxJ2:
3.±0ꢀ±ꢀ0.0±
(.138ꢀ±ꢀ.002)ꢀ
60
(2.362)ꢀ
8.00ꢀ±ꢀ0.20
(.31±ꢀ±ꢀ.008)ꢀ
2.20ꢀ±ꢀ0.10
(.087ꢀ±ꢀ.004)ꢀ
9.0ꢀ±ꢀ0.3
(.3±4ꢀ±ꢀ.012)ꢀ
CAY10-xxxJ4:
21.0ꢀ±ꢀ0.8
(.827ꢀ±ꢀ.031)ꢀ
1.0
1.20ꢀ±ꢀ0.10
(.047ꢀ±ꢀ.004)ꢀ
2.00ꢀ±ꢀ0.10
(.079ꢀ±ꢀ.004)ꢀ
MAX.
(.040)ꢀ
180
(7.087)ꢀ
11.4ꢀ±ꢀ1.0
(.449ꢀ±ꢀ.040)ꢀ
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
REV.ꢀ02/21
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
相关型号：
CAY10-390J4LF
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.125W, 39ohm, 25V, 5% +/-Tol, 250ppm/Cel, Surface Mount, 0804, CHIP, ROHS COMPLIANT
BOURNS
©2020 ICPDF网 联系我们和版权申明