CD214A-FS1D [BOURNS]
Rectifier Diode,;
| 型号： | CD214A-FS1D |
| 厂家： | 
BOURNS ELECTRONIC SOLUTIONS |
| 描述： | Rectifier Diode, |
| 文件： | 总5页 (文件大小：648K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
Applications
nꢀ RoHSꢀcompliant*
nꢀ Lowꢀprofile
nꢀ SwitchꢀModeꢀPowerꢀSupplies
nꢀ Portableꢀequipmentꢀbatteries
nꢀꢀHighꢀfrequencyꢀrectification
nꢀ DC/DCꢀConverters
nꢀꢀLowꢀpowerꢀloss,ꢀhighꢀefficiency
nꢀ ULꢀ94V-0ꢀrating
nꢀ Halogenꢀfree**
nꢀ Telecommunications
ꢀꢀCD214A-FS1xꢀSeriesꢀFastꢀResponseꢀRectifierꢀChipꢀDiode
General Information
Portable communications, computing and video equipment manufacturers are challenging the
semiconductor industry to develop increasingly smaller electronic components.
Bourns offers Glass Passivated Rectifiers for rectification applications, in a compact chip
package compatible with DO-214AC (SMA) size format. The Glass Passivated Rectifiers offer
a forward current of 1 A with a choice of repetitive peak reverse voltage of 200 V up to 800 V.
Absolute Maximum Ratings (@ T = 25 °C Unless Otherwise Noted)
A
CD214A-
Parameter
Symbol
Unit
FS1D
FS1G
FS1J
FS1K
Maximum Repetitive Peak Reverse Voltage
Maximum Average Forward Current
V
200
400
600
800
V
A
RRM
I
1
F(AV)
Maximum Peak Forward Surge Current
(8.3 ms Single Half Sine-Wave)
I
30
25
A
FSM
Operating Junction Temperature Range
Storage Temperature Range
T
-65 to +175
-65 to +175
°C
°C
OPR
T
STG
Electrical Characteristics (@ T = 25 °C Unless Otherwise Noted)
A
Parameter
Symbol
Condition or Model
Min.
Typ.
0.94
1.15
1.40
1.65
Max.
Unit
CD214A-FS1D
CD214A-FS1G
CD214A-FS1J
CD214A-FS1K
0.95
1.25
1.70
2.20
Maximum Instantaneous Forward Voltage
V
I
= 1 A
F
V
F
(NOTE 1)
DC Reverse Current
I
V
= V
0.20
5
µA
nS
R
R
RRM
I
= 0.5 A
F
Reverse Recovery
Time
I
= 1 A
T
35
R
rr
I
= 0.25 A
rr
V
= 4 V,
R
Typical Junction Capacitance
C
8.0
pF
J
f = 1.0 MHz
Junction to Ambient
Junction to Lead
R
70
10
Typical Thermal
Resistance
(NOTE 2)
θJA
°C/W
R
θJL
NOTES: (1) Pulse width 300 microsecond, 1 % duty cycle.
(2) Mounted on PCB with 5.0 x 5.0 mm (0.2 x 0.2 inch) copper pad areas.
WARNINGꢀꢀCancerꢀandꢀReproductiveꢀHarmꢀ- www.P65Warnings.ca.gov
*ꢀ RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.
**ꢀ Bournsꢀconsidersꢀaꢀproductꢀtoꢀbeꢀ“halogenꢀfree”ꢀifꢀ(a)ꢀtheꢀBromineꢀ(Br)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀ(b)ꢀtheꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀandꢀ(c)ꢀtheꢀtotalꢀBromineꢀ(Br)ꢀandꢀꢀ
ꢀ
Chlorineꢀ(Cl)ꢀcontentꢀisꢀ1500ꢀppmꢀorꢀless.ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CD214A-FS1xꢀSeriesꢀFastꢀResponseꢀRectifierꢀChipꢀDiode
Performance Graphs
Forward Current Derating Curve
Maximum Peak Forward Surge Current
1.25
35
30
8.3ꢀms
SingleꢀHalf
Sine-Wave
1.00
0.75
0.50
(JEDECꢀMethod)
25
20
15
10
5
CD214A-FS1Dꢀ&ꢀ-FS1G
CD214A-FS1Jꢀ&ꢀ-FS1K
0.25
0
RESISTIVEꢀOR
INDUCTIVEꢀLOAD
0
1
10
100
0
25
50
75
100
125
150
175
NumberꢀofꢀCyclesꢀ@ꢀ60ꢀHz
LeadꢀTemperatureꢀ(°C)
Typical Instantaneous Forward Characteristics
Typical Reverse Characteristics
10.00
100
T ꢀ=ꢀ150ꢀ°C
J
10
T ꢀ=ꢀ25ꢀ°C
J
1.00
0.10
T ꢀ=ꢀ125ꢀ°C
J
1.0
0.1
T ꢀ=ꢀ25ꢀ°C
J
0.01
0.01
0
20
40
60
80
100 110
0.2
0.6
1.0
1.4
1.8
2.2
PercentꢀofꢀRatedꢀPeakꢀReverseꢀVoltageꢀ(%)
InstantaneousꢀForwardꢀVoltageꢀ(Volts)
Typical Junction Capacitance
200
100
T ꢀ=ꢀ25ꢀ°C
J
60
40
20
10
6
4
2
1
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
0.1 0.2 0.4
1.0
2
4
10 20 40
100
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀ
setꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
ReverseꢀVoltageꢀ(Volts)
CD214A-FS1xꢀSeriesꢀFastꢀResponseꢀRectifierꢀChipꢀDiode
Product Dimensions
Recommended Pad Layout
A
F
C
DIA.
B
G
H
I
D
D
Dimension
CD214A-FS1 Series
2.60
(0.102)
MAX.
F
E
1.47
MIN.
G
H
I
(0.058)
Dimension
CD214A-FS1 Series
1.27
MIN.
4.5 ± 0.10
(0.177 ± 0.004)
(0.050)
A
5.14
(0.202)
REF.
2.20 ± 0.10
(0.087 ± 0.004)
B
ꢀ
MM
(INCHES)
DIMENSIONS:
0.50
(0.020)
C (Dia.)
ꢀ
0.95 ± 0.20
(0.037 ± 0.008)
D
E
Environmental Specifications
0.96 +0.20/-0.10
(0.038 +0.008/-0.004)
Moisture Sensitivity Level................................................................1
ꢀ
MM
(INCHES)
ESD Classification (HBM).............................................................1C
DIMENSIONS:
ꢀ
Typical Part Marking
How to Order
CD 214A - FS 1 D
DATEꢀCODE:
ꢀꢀꢀꢀYꢀ=ꢀLASTꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀDIGITꢀOFꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀYEAR
DEVICEꢀCODE:
FS1Dꢀ=ꢀCD214A-FS1D
FS1Gꢀ=ꢀCD214A-FS1G
FS1Jꢀ =ꢀCD214A-FS1J
FS1Kꢀ=ꢀCD214A-FS1K
Common Code
CD = Chip Diode
Package
FS1D
YWW
214A = SMA/DO-214AC Compatible
WWꢀ=ꢀWEEKꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNUMBER
Model
FS = Fast Response Rectifier Series
Maximum Average Forward Rectified Current
1 = 1 A
Maximum Repetitive Peak Reverse Voltage
D = 200 V
G = 400 V
J
= 600 V
K = 800 V
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CD214A-FS1xꢀSeriesꢀFastꢀResponseꢀRectifierꢀChipꢀDiode
Packaging Information
The product is dispensed in tape and reel format (see diagram below).
P
0
P
T
E
1
d
IndexꢀHole
120ꢀ°
F
D
2
W
B
D
D
1
P
A
C
Trailer
Device
Leader
W
.......
.......
.......
.......
.......
.......
.......
.......
1
End
Start
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
30ꢀpitches
30ꢀpitches
DirectionꢀofꢀFeed
Item
Symbol
CD214A-FS1 Series
2.45 ± 0.10
(0.096 ± 0.004)
Carrier Width
Carrier Length
Carrier Depth
Sprocket Hole
A
4.75 ± 0.10
(0.187 ± 0.004)
B
C
d
1.51 ± 0.10
(0.059 ± 0.004)
1.50 ± 0.10
(0.059 ± 0.004)
178 ± 2.0
(7.008 ± 0.079)
Reel Outside Diameter
Reel Inner Diameter
Feed Hole Diameter
Sprocket Hole Position
Punch Hole Position
Punch Hole Pitch
D
Asia-Pacific:
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
50.0
MIN.
D
D
1
(1.969)
13.0 ± 0.50
(0.512 ± 0.020)
2
Europe:
Tel: +36 88 885 877
Email: eurocus@bourns.com
1.75 ± 0.10
(0.069 ± 0.004)
E
5.50 ± 0.05
(0.217 ± 0.002)
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
F
P
4.00 ± 0.10
(0.157 ± 0.004)
www.bourns.com
4.00 ± 0.10
Sprocket Hole Pitch
Embossment Center
Overall Tape Thickness
Tape Width
P
0
1
(0.157 ± 0.004)
2.00 ± 0.10
(0.079 ± 0.004)
P
0.40
MAX.
T
(0.016)
12.00 ± 0.30
(0.472 ± 0.012)
REV. 03/20
W
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecific
legalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀ
www.bourns.com/docs/legal/disclaimer.pdf.
18.7
MAX.
Reel Width
W
1
(0.736)
Quantity per Reel
--
3,000
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
相关型号：
©2020 ICPDF网 联系我们和版权申明