CFG0612 [BOURNS]
CFG Series Metal Foil, Wide Terminal Current Sense Resistor;![CFG0612](http://pdffile.icpdf.com/pdf2/p00335/img/icpdf/CFG0612-FX-R_2060388_icpdf.jpg)
型号: | CFG0612 |
厂家: | ![]() |
描述: | CFG Series Metal Foil, Wide Terminal Current Sense Resistor |
文件: | 总5页 (文件大小:580K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
Features
Applications
nꢀ Wideꢀterminalꢀtype
nꢀ Excellentꢀheatꢀdissipation
nꢀ Highꢀreliability
nꢀ ꢀCurrentꢀsensing
nꢀ ꢀPowerꢀsupplies
nꢀ ꢀStepperꢀmotorꢀdrives
nꢀ ꢀInputꢀamplifiers
nꢀ Metalꢀfoil
nꢀ RoHSꢀcompliant*ꢀandꢀhalogenꢀfree**
CFG Series Metal Foil, Wide Terminal Current Sense Resistor
Electrical Characteristics
Derating Curve
Characteristic
CFG0612
100
Power Rating @ 70 °C
Resistance Value
1 W
80
5 mΩ, 10 mΩ
60
Operation Temperature Range
Temperature Coefficient of Resistance
Tolerance
-55 ℃ ~ +155 ℃
40
±100 ppm/°C
20
±1 %
0
-55
0
70
155
Insulation Resistance
Maximum Working Voltage (V)
Over 100 MΩ
(P*R)1/2
Ambient Temperature (°C)
Note: 1 watt with total solder pad and trace size of 300 mm2
Reliability Tests
Test Items
Reference Standard
Condition of Test
Test Limits
Temperature Coefficient
of Resistance
IEC60115-1-4.8
JIS-C5201-4.8
+25 °C ~ +125 °C
—
IEC60115-1-4.25.1
JIS-C5201-4.25.1
1000 hours at rated power, 70 ℃,
1.5 hours “ON”, 0.5 hour “OFF”
Load Life
< ±2 %
< ±1 %
< ±2 %
< ±1 %
< ±1 %
IEC60115-1-4.13
JIS-C5201-4.13
Short Time Overload
Moisture no Load
Temperature Cycle
5 X rated power for 5 s
IEC60115-1- 4.24.2.1a)
JIS-C5201- 4.24.2.1a)
85 ℃, 85 %RH, 1000 hrs
IEC60115-1-4.19
JIS-C5201-4.19
-55 ℃ & +125 ℃, 100 cycle,
15 min per extreme condition
Resistance to
Soldering Heat
IEC60115-1-4.18
JIS-C5201-4.18
260 ±5 ℃ for 10 ±1 sec
245 ±5 ℃, 2 ±0.5 sec
At least 95 % of surface area
of electrode shall be covered
with new solder
IEC60115-1-4.17
JIS-C5201-4.17
Solderability
High Temperature
Exposure
IEC60115-1- 4.23.2
JIS-C5201-4.23.2
155 ℃, 1000 hrs
< ±2 %
< ±2 %
< ±1 %
>100 MΩ
Low Temperature
Storage
EC60115-1- 4.23.4
JIS-C5201-4.23.4
-55 ℃, 1000 hrs
IEC60115-1-4.33
JIS-C5201-4.33
Substrate Bending
Bending width 2 mm
100 V DC for 1 minute
IEC60115-1-4.6
JIS-C5201-4.6
Insulation Resistance
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*ꢀ RoHSꢀDirectiveꢀ2002/95/ECꢀJan.ꢀ27,ꢀ2003ꢀincludingꢀannexꢀandꢀRoHSꢀRecastꢀ2011/65/EUꢀJuneꢀ8,ꢀ2011.
**ꢀBournsꢀconsidersꢀaꢀproductꢀtoꢀbeꢀ“halogenꢀfree”ꢀifꢀ(a)ꢀtheꢀBromineꢀ(Br)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀ(b)ꢀtheꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀandꢀ(c)ꢀtheꢀtotalꢀBromineꢀ(Br)ꢀ
andꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ1500ꢀppmꢀorꢀless.
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.ꢀꢀ
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CFG Series Metal Foil, Wide Terminal Current Sense Resistor
Product Dimensions
Recommended Solder Pad Dimensions
3.20 0.20
2.10
(.126 .00ꢀ8
(.083)
0.70
(.028)
1.60 0.20
(.063 .00ꢀ8
3.80
(.150)
MM
(INCHES)
Cu Trace
0.70 0.20
(.02ꢀ .00ꢀ8
0.40 0.20
(.016 .00ꢀ8
DIMENSIONS:
MM
(INCHES)
DIMENSIONS:
Sensing Trace
Construction
Environmental Characteristics
Storage Conditions
SOLDER
COATING
TOP PROTECTIVE
COATING
METAL FOIL
Temperature ...................................................+5 °C ~ +35 °C
Humidity............................................................40 % ~ 75 %
Shelf Life..................................2 years from manufacturing date
Solder Recommendations..................................... Reflow profile
(Solder: Sn96.5 / Ag3 / Cu0.5)
Moisture Sensitivity Level.......................................................... 1
NICKEL
UNDERLAY
ALUMINA SUBSTRATE
Popular Resistance Values*
Rated Voltage
Code
R005
R010
Resistance Value (milliohms
The rated voltage is calculated by the following formula:
5
V= P X R
I = P ÷ R
V: Rated Voltage (V)
I: Rated Current (Ω)
P: Rated Power (W)
R: Resistance Value (W)
10
*Please consult factory for other resistance values
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CFG Series Metal Foil, Wide Terminal Current Sense Resistor
Solder Reflow Recommendations
t
p
Solder Profile
Average ramp-up rate
(T to T )
Lead Free Assembly
T
P
CRITICAL ZONE
TO
RAMP-UP
T
T
P
L
3 °C / second max.
smax
p
T
L
Preheat:
t
L
- Temperature Min. (T
- Temperature Max. (T
)
150 °C
200 °C
60~150 seconds
T
T
MAX.
MIN.
smin
S
S
RAMP-DOWN
)
smax
- Time (T
to T
) (t )
smin
smax
s
t
s
Time maintained above:
PREHEAT
- Temperature (T )
L
217 °C
60~120 seconds
25 °C
- Time (T )
L
8 MINUTES MAX.
t 25 *C TO PEAK
Peak Temperature (T )
p
260 °C
Time
Time within +0/-5 °C of actual
10 seconds
2
Peak Temperature (T )
p
Ramp-down rate
6 °C / second max.
8 minutes max.
Time 25 °C to Peak
Temperature
How to Order
CFG 0612 - F X - R005 E LF
Model
CFG = Metal Foil, Wide Terminal Current Sense Resistor
Size
0612 = 0612 Size
Resistance Tolerance
F = ±1 %
TCR
X = ±100 PPM/°C
Resistance Code – (See Popular Resistance Table)
“R” (decimal point) followed by three significant digits (example: R005 = 0.005 ohms)
Packaging
E = Tape and Reel
4,000 pcs. / 7-inch reel, paper tape
Termination
LF = Tin-plated (RoHS Compliant)
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CFG Series Metal Foil, Wide Terminal Current Sense Resistor
Packaging Dimensions (Conforms to EIA RS-481A)
ꢀ.71 0.ꢀ0
(.0ꢁ9 .0046
ꢀ.11 0.ꢀ0
(.0ꢁꢀ .0046
4.00 0.ꢀ0
(.ꢀ17 .0046
Top Tape
DIA.
Bottom Tape
3.10 0.01
(.ꢀ3ꢂ .0026
3.ꢁ0 0.20
Resistor
(.ꢀ42 .00ꢂ6
ꢂ.00 0.20
(.3ꢀ1 .00ꢂ6
Paper Tape
ꢀ.01 0.ꢀ0
(.04ꢀ .0046
2.00 0.ꢀ1
(.079 .00ꢁ6
4.00 0.ꢀ0
(.ꢀ17 .0046
2.00 0.ꢀ0
(.079 .0046
DIRECTION OF UNREELING
MM
(INCHES)
DIMENSIONS:
9.0 ꢀ.0
(.354 .039ꢁ
ꢀ3.0 ꢀ.0
(.5ꢀ2 .039ꢁ
DIA.
60.0 ꢀ.0
(2.362 .039ꢁ
DIA.
ꢀ78 2.0
(7.008 .079ꢁ
DIA.
ꢀꢀ.4 ꢀ.0
(.449 .039ꢁ
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
REV.ꢀ04/19
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
相关型号:
©2020 ICPDF网 联系我们和版权申明