CR0402-FX-23R7GLF [BOURNS]
RES SMD 23.7 OHM 1% 1/16W 0402;型号: | CR0402-FX-23R7GLF |
厂家: | BOURNS ELECTRONIC SOLUTIONS |
描述: | RES SMD 23.7 OHM 1% 1/16W 0402 |
文件: | 总9页 (文件大小:1065K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Features
nꢀ RoHSꢀcompliant*
nꢀ Tightꢀtoleranceꢀofꢀbottomꢀelectrodeꢀwidth
nꢀ 1ꢀ%ꢀandꢀ5ꢀ%ꢀtoleranceꢀoptions
nꢀ Threeꢀlayerꢀterminationꢀprocessꢀwithꢀnickelꢀbarrierꢀhelpsꢀpreventꢀleachingꢀandꢀprovidesꢀꢀ
1
0
ꢀ
excellentꢀsolderability
C
nꢀ Tapeꢀandꢀreelꢀpackaging
CR Series - Thick Film Chip Resistors
Electrical Characteristics
Model No.
Characteristic
CR01005
CR0201
CR0402
CR0603
CR0805
CR1206
CR2010
CR2512
Power Rating
1/32 W
1/20 W
1/16 W
1/10 W
1/8 W
1/4 W
1/2 W
1 W
@ 70 °C
Operating
Temp. Range
-55 °C to +125 °C
+125 °C
-55 °C to +155 °C
+155 °C
Derated to
Zero Load @
Max. Working
Voltage
15 V
30 V
30 V
50 V
50 V
75 V
150 V
300 V
200 V
400 V
200 V
400 V
200 V
400 V
Max. Overload
Voltage
100 V
150 V
Resistance
Tolerance
±1 %, ±5 %
1ꢀΩ≤R<10ꢀΩꢀ
-200~+500
ppm/°C
1ꢀΩ≤R<10ꢀΩꢀ
1ꢀΩ≤R<10ꢀΩꢀ
1ꢀΩ≤R<10ꢀΩꢀ
1ꢀΩ≤R<10ꢀΩꢀ
1ꢀΩ≤R<10ꢀΩꢀ
±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C
1ꢀΩ≤R<10ꢀΩꢀ
-200~+600
ppm/°C
Temperature
Coefficient
10ꢀΩ≤R<100ꢀΩꢀ
±300 ppm/°C
10ꢀΩ≤R≤1ꢀMΩꢀ 10ꢀΩ≤R≤1ꢀMΩꢀ 10ꢀΩ≤R≤1ꢀMΩꢀ 10ꢀΩ≤R≤1ꢀMΩꢀ 10ꢀΩ≤R≤1ꢀMΩꢀ
±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C
±1 %
10ꢀΩ≤R≤1ꢀMΩꢀ
±100 ppm/°C
100ꢀΩ≤R<1ꢀMΩꢀ
±200 ppm/°C
(E24 & E96
Series)
10ꢀΩ≤R≤3ꢀMΩꢀ
±200 ppm/°C
1ꢀMΩ<R≤10ꢀMΩꢀ 1ꢀMΩ<R≤10ꢀMΩꢀ 1ꢀMΩ<R≤10ꢀMΩꢀ 1ꢀMΩ<R≤10ꢀMΩꢀ 1ꢀMΩ<R≤10ꢀMΩꢀ
±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C
1ꢀMΩ<R≤10ꢀMΩꢀ
±200 ppm/°C
1ꢀΩ≤R<10ꢀΩꢀ
-200~+500
ppm/°C
1ꢀΩ≤R<10ꢀΩꢀ
1ꢀΩ≤R<10ꢀΩꢀ
1ꢀΩ≤R<10ꢀΩꢀ
1ꢀΩ≤R<10ꢀΩꢀ
1ꢀΩ≤R<10ꢀΩꢀ
±400 ppm/°C ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C
1ꢀΩ≤R<10ꢀΩꢀ
-200~+600
ppm/°C
10ꢀΩ≤R<100ꢀΩꢀ
±300 ppm/°C
Temperature
Coefficient
10ꢀΩ≤R≤10ꢀMΩꢀ 10ꢀΩ≤R≤10ꢀMΩꢀ 10ꢀΩ≤R≤10ꢀMΩꢀ 10ꢀΩ≤R≤10ꢀMΩꢀ 10ꢀΩ≤R≤10ꢀMΩꢀ
±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C
10ꢀΩ≤R≤10ꢀMΩꢀ
±200 ppm/°C
±5 %
100ꢀΩ≤R≤1ꢀMΩꢀ
±200 ppm/°C
10ꢀΩ≤R≤10ꢀMΩꢀ
±200 ppm/°C
(E24 Series)
10ꢀMΩ<R≤20ꢀMΩꢀ10ꢀMΩ<R≤20ꢀMΩꢀ10ꢀMΩ<R≤20ꢀMΩꢀ10ꢀMΩ<R≤20ꢀMΩꢀ10ꢀMΩ<R≤20ꢀMΩꢀ
±400 ppm/°C ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C ±400 ppm/°C
10ꢀMΩ<R≤20ꢀMΩꢀ
±400 ppm/°C
Zero Ohm
Jumper
50 milliohms max.
Rated Current
0.5 A
1 A
1 A
2.5 A
2 A
5 A
Max. Overload
Current
Environmental Characteristics
Additional Information
Click these links for more information:
Moisture Sensitivity Level.......................................................... 1
PRODUCT
TECHNICAL
LIBRARY
INVENTORY
SAMPLES
CONTACT
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*ꢀ RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CR Series - Thick Film Chip Resistors
Product Dimensions
L
Model
L
W
C
D
T
0.40 ± 0.02
0.20 ± 0.03
0.10 ± 0.03
0.10 ± 0.03
0.13 ± 0.02
CR01005
(.016 ± .0008) (.008 ± .001) (.004 ± .001) (.004 ± .001) (.009 ± .0008)
0.60 ± 0.03 0.30 ± 0.03 0.10 ± 0.05 0.15 ± 0.05 0.23 ± 0.03
(.024 ± .001) (.012 ± .001) (.004 ± .002) (.006 ± .002) (.009 ± .001)
1.00 ± 0.05 0.50 ± 0.05 0.20 ± 0.10 0.25 ± 0.10 0.32 ± 0.05
(.039 ± .002) (.020 ± .002) (.008 ± .004) (.010 ± .004) (.013 ± .002)
1.60 ± 0.10 0.80 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 0.45 ± 0.10
(.063 ± .004) (.031 ± .004) (.012 ± .008) (.012 ± .008) (.018 ± .004)
2.00 ± 0.10 1.25 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 0.50 ± 0.10
(.079 ± .004) (.049 ± .004) (.016 ± .008) (.016 ± .008) (.020 ± .004)
3.10 ± 0.10 1.55 ± 0.10 0.50 ± 0.30 0.40 ± 0.20 0.55 ± 0.10
(.122 ± .004) (.061 ± .004) (.020 ± .012) (.016 ± .008) (.022 ± .004)
5.00 ± 0.15 2.50 ± 0.15 0.60 ± 0.30 0.50 ± 0.25 0.60 ± 0.10
(.197 ± .006) (.098 ± .006) (.024 ± .012) (.020 ± .010) (.024 ± .004)
6.30 ± 0.20 3.20 ± 0.20 0.60 ± 0.30 0.50 ± 0.25 0.60 ± 0.10
(.248 ± .008) (.126 ± .008) (.024 ± .012) (.020 ± .010) (.024 ± .004)
W
CR0201
CR0402
CR0603
CR0805
CR1206
CR2010
CR2512
C
C
D
T
MM
(INCHES)
DIMENSIONS:
Recommended Pad Layout
RESISTOR
Model
a
b
c
0.15 ~ 0.20
(.006 ~ .008)
0.50 ~ 0.70
(.020 ~ .028)
0.20 ~ 0.25
(.008 ~ .010)
CR01005
c
a
b
0.25 ~ 0.30
(.010 ~ .012)
0.70 ~ 0.90
(.028 ~ .035)
0.30 ~ 0.40
(.012 ~ .016)
CR0201
CR0402
CR0603
CR0805
CR1206
CR2010
CR2512
MM
(INCHES)
0.50 ~ 0.60
(.020 ~ .024)
1.40 ~ 1.60
(.055 ~ .063)
0.40 ~ 0.60
(.012 ~ .024)
DIMENSIONS:
0.70 ~ 0.90
(.028 ~ .035)
2.00 ~ 2.20
(.079 ~ .087)
0.80 ~ 1.00
(.031 ~ .039)
1.00 ~ 1.40
(.039 ~ .055)
3.20 ~ 3.80
(.126 ~ .150)
0.90 ~ 1.40
(.035 ~ .055)
2.00 ~ 2.40
(.079 ~ .094)
4.40 ~ 5.00
(.173 ~ .197)
1.20 ~ 1.80
(.047 ~ .071)
3.30 ~ 3.70
(.130 ~ .146)
5.70 ~ 6.50
(.224 ± .256)
2.30 ~ 3.50
(.091 ~ .138)
3.60 ~ 4.00
(.142 ~ .157)
7.60 ~ 8.60
(.299 ~ .339)
2.30 ~ 3.50
(.091 ~ .138)
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CR Series - Thick Film Chip Resistors
Soldering Profile
275
225
175
125
75
<1>
Maximumꢀofꢀ20ꢀsecondsꢀbetween
ꢀꢀꢀꢀꢀꢀꢀꢀ+255ꢀ°Cꢀandꢀ+260ꢀ°C
260ꢀ°Cꢀpeak
<1>
ꢀꢀꢀꢀꢀꢀ255ꢀ°C
220ꢀ°C
190ꢀ°C
60ꢀ-ꢀ90
seconds
RampꢀDown
6ꢀ°C/second
150ꢀ°C
60ꢀ-ꢀ120ꢀseconds
10ꢀsecondsꢀminimum
RampꢀUp
3ꢀ°C/secondꢀmaximum
25
0
50
100
150
200
250
300
Time (Seconds)
Derating Curve
100
80
60
40
20
0
70
CR0402~CR2512
CR01005,
CR0201
125
155
-55
20
40
60
80
100
120
140
160
Ambient Temperature (°C)
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CR Series - Thick Film Chip Resistors
Performance Characteristics
Test
Procedure (IEC 60115-1)
Test Limits ∆R
≤± (1 % + 0.05 Ω )
Remarks:
Short Time Overload
2.5 x rated voltage for 5 seconds
CR01005, CR0201.................. ± (3 % + 0.1 Ω)
CR0402 ................................... ± (2 % + 0.1 Ω)
0 Ω Jumper................................ 50 mΩ or less
1 %: ≤± (1 % + 0.05 Ω)
5 %: ≤± (3 % + 0.1 Ω)
3.0 x rated voltage or max. overloading voltage,
1 sec. “ON”, 25 sec. “OFF”,10,000 cycles
Remarks:
Intermittent Overload
Remarks:
CR01005, CR0201.................. ± (5 % + 0.1 Ω)
CR0402 ................................... ± (3 % + 0.1 Ω)
0 Ω Jumper.............................. 100 mΩ or less
CR01005, CR0201..................................................... not applicable
CR0402 ...............................2.5 x rated continuous working voltage
1 %: ≤± (1 % + 0.05 Ω)
5 %: ≤± (3 % + 0.1 Ω)
1000 hours at rated voltage, 70 ℃ ,
1.5 hours “ON “, 0.5 hour “OFF”
Remarks:
Load Life
CR01005, CR0201.................. ± (5 % + 0.1 Ω)
CR0402 ................................... ± (3 % + 0.1 Ω)
0 Ω Jumper.............................. 100 mΩ or less
1 %: ≤± (1 % + 0.05 Ω)
5 %: ≤± (3 % + 0.1 Ω)
1000 hours at rated voltage , 40±2 ℃,
90~95 % RH 1.5 hours “ON “, 0.5 hour “OFF”
Remarks:
Load Life Humidity
CR01005, CR0201.................. ± (5 % + 0.1 Ω)
CR0402 ................................... ± (3 % + 0.1 Ω)
0 Ω Jumper.............................. 100 mΩ or less
1 %: ≤± (0.5 % + 0.05 Ω)
5 %: ≤± (1 % + 0.05 Ω)
Rapid Change of Temperature
-55 ℃ (30 min.) / +155 ℃ (30 min.) 5 cycles
Remarks:
CR01005, CR0201.................. ± (3 % + 0.1 Ω)
0 Ω Jumper................................ 50 mΩ or less
1 %: ≤± (0.5 % + 0.05 Ω)
5 %: ≤± (1 % + 0.05 Ω)
Remarks:
Resistance to Solder Heat
270±5 ℃, 10±1 sec.
CR01005 ............................... ± (3 % + 0.05 Ω)
CR0201 ................................... ± (3 % + 0.1 Ω)
0 Ω Jumper................................ 50 mΩ or less
245±5 ℃ solder, 2±0.5 seconds dwell
Solder: Sn96.5 / Ag3.0 / Cu0.5
Over 95 % of termination must be covered
with solder
Solderability
1 %: ≤± (1 % + 0.05 Ω)
5 %: ≤± (1 % + 0.05 Ω)
155±5 ℃ for 96±4 hours
Resistance to Dry Heat
Remarks:
Remarks:
CR0201 ............................................................................. 125±5 °C
CR01005, CR0201.................. ± (1 % + 0.1 Ω)
0 Ω Jumper................................ 50 mΩ or less
1 %: ≤± (0.5 % + 0.05 Ω)
5 %: ≤± (2 % + 0.1 Ω)
3 mm deflection
Remarks:
Bending
Remarks:
CR01005, CR0201.................. ± (3 % + 0.1 Ω)
CR0402 ................................... ± (2 % + 0.1 Ω)
0 Ω Jumper................................ 50 mΩ or less
CR2010, CR2512....................................................2 mm deflection
500 V, 1 minute
No abnormalities such as flashover, burning or
dielectric breakdown shall appear
Remarks:
Dielectric Withstanding Voltage
Insulation Resistance
CR01005, CR0201....................................................................50 V
CR0402 ...................................................................................300 V
100 V, 1 minute
≥1 GΩ
Remarks:
Remarks:
CR0201 .....................................................................................50 V
CR01005 ..........................................≥100 MΩ)
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.ꢀUsersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CR Series - Thick Film Chip Resistors
How to Order
CR 1206 - F X - 1003 E LF
Model
(CR = Chip Resistor)
Size
01005 = 01005 size
0201 = 0201 size
0402 = 0402 size
0603 = 0603 size
0805 = 0805 size
1206 = 1206 size
2010 = 2010 size
2512 = 2512 size
Resistance Tolerance
F = ±1 %
J = ±5 %
TCR (ppm/°C) – See Electrical Characteristics Chart
X = ±100
W = ±200
V = ±300
Z = ±400
/ = Used for zero Ω (jumper) and values from 1 Ω through 9.76 Ω.
Resistance Value
For 1 % Tolerance:
<100 Ω..... “R” represents decimal point (example: 24R3 = 24.3 Ω).
≥100 Ω .... First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5K Ω).
For 5 % Tolerance:
<10 Ω....... “R” represents decimal point (example: 4R7 = 4.7 Ω).
≥10 Ω ....... First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470K Ω; 000 = Jumper).
Packaging
G = Paper Tape (10,000 pcs.) on 7-inch Plastic Reel – CR01005, CR0201, CR0402
E = Paper Tape (5,000 pcs.) on 7-inch Plastic Reel – CR0603, CR0805, CR1206 or
Embossed Tape (4,000 pcs) on 7-inch Plastic Reel – CR2010, CR2512
Termination
LF = Tin-plated (RoHS Compliant)
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CR Series - Thick Film Chip Resistors
EIA-96 Marking for CR0603, 1 %
Marking Explanation
0Ω JUMPER:
Code
01
02
03
04
05
06
07
08
09
10
11
R Value
100
102
105
107
110
113
115
118
121
124
127
130
133
137
140
143
147
150
154
158
162
165
169
174
Code
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
R Value
178
182
187
191
196
200
205
210
215
221
226
232
237
243
249
255
261
267
274
280
287
294
301
309
Code
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
R Value
316
324
332
340
348
357
365
374
383
392
402
412
422
432
442
453
464
475
487
499
511
523
536
549
Code
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
R Value
562
576
590
604
619
634
649
665
681
698
715
732
750
768
787
806
825
845
866
887
909
931
953
976
0
CR01005, CR0201,
CR0402:
No marking.
CR0603:
• (E-96): EIA-96
marking (see table).
If the resistance
value is not available
in the E-96 list, a
3 digit E-24 marking
with underline is
used.
01A
(Value = 100 Ω)
121
(Value = 120 Ω)
12
13
14
15
16
17
18
19
20
21
22
23
24
CR0805, CR1206,
CR2010, CR2512:
• 5 % (E-24): 3 digits;
first two digits are
significant, third digit
is number of zeros
to follow.
Letter R is decimal
point.
103
(Value = 10K Ω)
• 1 % (E-24 & E-96):
4 digits; first three
digits are significant,
fourth digit is number
of zeros to follow.
Letter R is decimal
point.
4422
(Value = 44.2K Ω)
Multipliers
Code
A
B
C
D
E
F
G
H
X
Y
Z
Multiplier 100
101
102
103
104
105
106
107
10-1
10-2
10-3
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CR Series - Thick Film Chip Resistors
Packaging Dimensions (Conforms to EIA RS-481A)
1.50 0.10
(.059 .00ꢀ)
BOTTOM TAPE
TOP TAPE
DIA.
E
PAPER TAPE
(2 mm PITCH)
F
W
RESISTOR
B
PAPER TAPE
P1
P2
P0
DIRECTION OF UNREELING
T
A
1.50 0.10
(.059 .00ꢀ)
BOTTOM TAPE
TOP TAPE
DIA.
E
PAPER TAPE
(4 mm PITCH)
F
W
RESISTOR
B
PAPER TAPE
P1
P2
P0
DIRECTION OF UNREELING
T
A
1.50
(.059)
1.50 0.10
(.059 .00ꢀ)
MIN. DIA.
EMBOSSED TAPE
TOP TAPE
DIA.
E
EMBOSSED TAPE
(4 mm PITCH)
F
W
RESISTOR
B
MM
(INCHES)
DIMENSIONS:
P1
P2
P0
DIRECTION OF UNREELING
T
A
Model
Tape Type
A
B
W
F
E
P1
P2
P0
T
0.24 ± 0.05
0.45 ± 0.10
0.15 ± 0.10
Paper Tape
(2 mm pitch)
CR01005
(.010 ± .002) (.018 ± .004)
(.006 ± .004)
0.37 ± 0.05
0.67 ± 0.10
2.00 ± 0.10
0.37 ± 0.10
CR0201
CR0402
CR0603
CR0805
CR1206
CR2010
CR2512
(.014 ± .002) (.026 ± .004)
(.079 ± .004)
(.015 ± .004)
Paper Tape
(2 mm pitch)
0.70 ± 0.05
1.20 ± 0.05
0.45 ± 0.10
(.028 ± .002) (.047 ± .002)
(.018 ± .004)
8.00 ± 0.20
3.50 ± 0.05
(.315 ± .008) (.138 ± .002)
1.10 ± 0.10
1.90 ± 0.10
0.64 ± 0.10
(.043 ± .004) (.075 ± .004)
(.025 ± .004)
1.75 ± 0.10
2.00 ± 0.05
4.00 ± 0.10
(.069 ± .004)
(.079 ± .002) (.157 ± .004)
1.60 ± 0.15
2.40 ± 0.20
0.84 ± 0.10
Paper Tape (4
mm pitch)
(.063 ± .006) (.094 ± .008)
(.033 ± .004)
2.00 ± 0.15
3.60 ± 0.20
4.00 ± 0.10
0.84 ± 0.10
(.079 ± .006) (.142 ± .008)
(.157 ± .004)
(.033 ± .004)
2.80 ± 0.20
5.30 ± 0.20
0.85 ± 0.15
Embossed
Tape
(4 mm pitch)
(.110 ± .008) (.209 ± .008)
(.033 ± .006)
12.00 ± 0.20 5.50 ± 0.05
(.472 ± .008) (.217 ± .002)
3.60 ± 0.20
6.90 ± 0.20
0.85 ± 0.15
(.142 ± .008) (.272 ± .008)
(.033 ± .006)
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
CR Series - Thick Film Chip Resistors
Packaging Dimensions (Conforms to EIA RS-481A)
W
C DIA.
B DIA.
MM
(INCHES)
DIMENSIONS:
T
A DIA.
Model
Packaging Quantity
A
B
C
W
T
CR01005
CR0201
CR0402
CR0603
CR0805
CR1206
CR2010
CR2512
10K pcs./reel
9.0 ± 1.0
(.354 ± .039)
11.5 ± 1.0
(.453 ± .039)
178 ± 2.0
(7.008 ± .079)
60 ± 1.0
(2.362 ± .039)
13.0 ± 1.0
(.512 ± .039)
5K pcs./reel
4K pcs./reel
13.0 ± 1.0
(.512 ± .039)
15.5 ± 1.0
(.610 ± .039)
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
REV. 03/21
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
相关型号:
CR0402-FX-2433GLF
Fixed Resistor, Ruthenium Oxide, 0.0625W, 243000ohm, 50V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0402, CHIP, ROHS COMPLIANT
BOURNS
©2020 ICPDF网 联系我们和版权申明