EPS1J-F19-AE0024 [BOURNS]
Rotary Coded Switch, 1 Positions, SPST, Momentary, 0.01A, 12VDC, Solder Terminal, Flat Shaft Type Actuator, Through Hole-straight;型号: | EPS1J-F19-AE0024 |
厂家: | BOURNS ELECTRONIC SOLUTIONS |
描述: | Rotary Coded Switch, 1 Positions, SPST, Momentary, 0.01A, 12VDC, Solder Terminal, Flat Shaft Type Actuator, Through Hole-straight |
文件: | 总3页 (文件大小:162K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Features
■ Incremental encoder / momentary push switch option
■ Long operating life
■ Sturdy construction
■ Snap-in mount
EPS - Digital Contacting Encoder With Momentary Switch Option
Electrical Characteristics
Output ................................................................................ 2-bit quadrature code, Channel A leads Channel B by 90 º electrically turning clockwise (CW)
Closed Circuit Resistance...........................................................................................................................................................................5 ohms maximum
Open Circuit Resistance....................................................................................................................................................................... 500 K ohms minimum
Contact Rating ..................................................................................................................................................10 milliamp @ 10 VDC or 0.1 watt maximum
Insulation Resistance (500 VDC) ................................................................................................................................................... 1,000 megohms minimum
Dielectric Withstanding Voltage (MIL-STD-202 Method 301)
Sea Level.............................................................................................................................................................................................1,000 VAC minimum
Electrical Travel......................................................................................................................................................................................................Continuous
Contact Bounce (15 RPM)................................................................................................................................................................5 milliseconds maximum
RPM (Operating)............................................................................................................................................................................................... 120 maximum
Encoder Switching Configuration (applies to detented version only) ............................................................................................................. Normally Open
Phase Tolerance (CH A to CH B)............................................................................................................................................................................ 90 ° ꢀ2 °
Environmental Characteristics
Operating Temperature Range ....................................................................................................................................... +1 ºC to +85 ºC (+34 °F to +185 °F)
Storage Temperature Range ..........................................................................................................................................-40 ºC to +85 ºC (-40 °F to +185 °F)
Humidity ................................................................................................................................................................MIL-STD-202, Method 103B, Condition B
Vibration ...........................................................................................................................................................................................................................15 G
Contact Bounce.......................................................................................................................................................................... 0.1 millisecond maximum
Shock ...............................................................................................................................................................................................................................50 G
Contact Bounce.......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life .................................................................................................................................................................................200,000 shaft revolutions
Switch Life.......................................................................................................................................................................................................100,000 cycles
IP Rating..........................................................................................................................................................................................................................IP 40
Mechanical Characteristics
Mechanical Angle........................................................................................................................................................................................ 360 ° Continuous
Running Torque ..............................................................................................................................................................0.5 to 1.5 N-cm (0.ꢀ5 to 2.25 oz-in.)
Mounting Torque ...........................................................................................................................................................56 to ꢀ9 N-cm (5-ꢀ lb.-in.) maximum
Shaft Side Load (Static)..................................................................................................................................................................4.53 kg (10 lbs.) minimum
Weight .................................................................................................................................................................................Approximately 21 gms. (0.ꢀ5 oz.)
Terminals .................................................................................................................................................................................Printed circuit board terminals
Soldering Condition...................................................................Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (ꢀ50 °F) for 3 seconds. No wash process to be used with no clean flux.
Part can be wave soldered at 260 °C (500 °F) for 5 seconds, no wash process with no clean flux.
Marking..............................................................................................................................................Manufacturer’s name and part number, and date code
Hardware.....................................................One lockwasher and one mounting nut supplied with each encoder, except where noted in the part number.
Switch Characteristics
Switch Type...............................................................................................................................................................................Push Momentary, SPST N.O.
Power Rating (Resistive Load) .................................................................................................................................................... 10 milliamps @ 12 volts DC
Closed Switch Resistance........................................................................................................................... Less than 200 ohms @ 440 gram force on shaft
Switch Travel ...................................................................................................................................................................................................2.25 0.25 mm
Switch Actuation Force ..............................................................................................................................................................3ꢀ0 ꢀ0 grams (5 1 oz.-in.)
Quadrature Output Table - This table is intended to show available outputs as currently defined.
FULL CYCLE PER DETENT
(Normally Open in Detent Shown)
RECOMMENDED INCREMENTAL CONTROL DIAGRAM
FOR USE WITH A DEBOUNCE CIRCUIT
.0015
f
(CUSTOMER LOGIC CIRCUITRY)
DIRECTION
FULL CYCLE PER DETENT (Normally Open in Detent Shown)
7
9
CW
Channel A
Closed Circuit
5 ms DELAY
DEBOUNCE
(MC 14490)
Open Circuit
DECODE
LOGIC
UP/DOWN
COUNTER
BINARY
OUTPUT
Closed Circuit
Open Circuit
MAGNITUDE
D
D
D
D
D
Channel B
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
EPS - Digital Contacting Encoder With Momentary Switch Option
Product Dimensions
15.2
(.598)
SNAP-IN MOUNTING - S style bushing / F style shaft
8.20
(.323)
19.0
(.748)
5.35
(.211)
3.17
2.00
2.26
(.089)
(.125)
(.079)
4.01
(.158)
4.800
(0.189)
DIA.
8.13
(.320)
1.60
26.97
(.063)
(1.061)
4.32
(.170)
2.50
(.098)
2X
2X
DIA.
2.00 +0.5/-0.0
(.078 +.020/-0.0)
TOTAL ACTUATION
TRAVEL
x
x
x
x
x
22.20
(.874)
0.50
(.020)
CHAMFER
X 45 °
3.60
(.142)
0.25
(.010)
7.50
(.300)
8.00
(.315)
9.00
PCB MOUNTING DIMENSIONS
(.354)
9.85
2X
(.388)
9.34
(.368)
0.97
(.038)
2.70
2X
4X
RADIUS
2X
DIA.
0.50
(.020)
0.75
(.030)
(.106)
X 45 °
CHAMFER
M9 X
– 6 g
18.0
(.710)
DIA.
25.00
(.984)
DIA.
24.33
(.958)
10.50
22.20
(.874)
23.00
(.905)
DIA.
(.413)
5.97
(.235)
3.97
(.156)
4.63
(.182)
1.10
(.043)
2X
6.50
(.260)
0.80
(.031)
2X
PIN 1
1.06
(.042)
2.54
(.100)
TYP
5X
MM
(IN)
DIMENSIONS:
1
2
3
4
5
TOLERANCES: EXCEPT WHERE NOTED
CHANNEL B
COMMON
.51
.13
DECIMALS: .XX
.XXX
(.020)
(.005)
CHANNEL A
TERMINAL
PIN NO.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
EPS - Digital Contacting Encoder With Momentary Switch Option
How to Order
PART NUMBERING SYSTEM
E P S 1 D - F 1 9 - A E 0 0 3 6 L
Encoder with Switch Option
RoHS IDENTIFIER
Code Description
BUSHING CONFIGURATION
Code Description
L
Compliant
Blank Non-Compliant
S
9 mm flatted x 5.35 mm length
Threaded M9 x 0.75
PERFORMANCE CODE
Code Detents Cycles/Rev.
SWITCH OPTION
Code Description
Switch (Push Momentary)
E0006
E0009
E0012
E0024
E0036
D0024
0
0
0
0
0
6
9
12
24
36
24
1
ANTI-ROTATION LUG POSITION
Code Description
24
J
D
9:00 Position
None
HOUSING TERMINAL CONFIGURATION
(X indicates “Equipped With”
Code
SHAFT STYLE (See Outline Drawing for Details)
Code Description
Features
Terminal (Rear Mounting)
Mounting Hardware Included
A
X
X
B
X
F
Flatted (4.8 mm Dia.)
SHAFT LENGTH (FMS)
Available
Code Description
19 Length (19/32)
Shaft Styles
F
REV. 02/11
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
相关型号:
EPS1J-F19-AE0036
Rotary Coded Switch, 1 Positions, SPST, Momentary, 0.01A, 12VDC, Solder Terminal, Flat Shaft Type Actuator, Through Hole-straight
BOURNS
EPS1J-F19-BE0006
Rotary Coded Switch, 1 Positions, SPST, Momentary, 0.01A, 12VDC, Solder Terminal, Flat Shaft Type Actuator, Through Hole-straight
BOURNS
EPS1J-F19-BE0009
Rotary Coded Switch, 1 Positions, SPST, Momentary, 0.01A, 12VDC, Solder Terminal, Flat Shaft Type Actuator, Through Hole-straight
BOURNS
EPS1J-F19-BE0012
Rotary Coded Switch, 1 Positions, SPST, Momentary, 0.01A, 12VDC, Solder Terminal, Flat Shaft Type Actuator, Through Hole-straight
BOURNS
EPS1J-F19-BE0024
Rotary Coded Switch, 1 Positions, SPST, Momentary, 0.01A, 12VDC, Solder Terminal, Flat Shaft Type Actuator, Through Hole-straight
BOURNS
©2020 ICPDF网 联系我们和版权申明