P4SMA-Q [BOURNS]
Transient Voltage Suppressor Diode Series;
| 型号： | P4SMA-Q |
| 厂家： | 
BOURNS ELECTRONIC SOLUTIONS |
| 描述： | Transient Voltage Suppressor Diode Series |
| 文件： | 总6页 (文件大小：599K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Features
Applications
nꢀ SurfaceꢀMountꢀSMAꢀpackage
nꢀꢀBreakdownꢀVoltage:ꢀ15ꢀtoꢀ68ꢀvolts
nꢀ PowerꢀDissipation:ꢀ400ꢀwatts
nꢀ RoHSꢀcompliant*ꢀandꢀhalogenꢀfree**
nꢀ AEC-Q101ꢀcompliant***
nꢀ Protectionꢀofꢀpowerꢀbuses
nꢀ ProtectionꢀofꢀI/Oꢀinterfaces
nꢀ Overvoltageꢀtransientꢀprotection
nꢀ Telecom,ꢀcomputer,ꢀindustrialꢀandꢀꢀ
ꢀ
consumerꢀelectronicsꢀapplications
ꢀ
P4SMA-Q Transient Voltage Suppressor Diode Series
General Information
The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
increasingly smaller electronic components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA)
size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 15 V up to 68 V. Typical fast response
times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration
minimizes roll away.
Maximum Ratings (@ T = 25 °C Unless Otherwise Noted)
A
Parameter
Symbol
Value
Unit
(Note 1,2)
Peak Pulse Power Dissipation (T = 1 ms)
P
P
400
Watts
PK
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method)
I
40
Amps
FSM
(Note 3)
Instantaneous Forward Voltage @ 25 A
(For Unidirectional Units Only)
V
T
3.5
Volts
F
Operating Temperature Range
Storage Temperature Range
-55 to +150
-55 to +150
°C
°C
J
T
STG
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 °C per Pulse Derating Curve.
A
2. Mounted on 5.0 mm x 5.0 mm copper pad to each terminal.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
How to Order
P4SMA 15 CA - Q
Series
Asia-Pacific:
P4SMA = SMA/DO-214AC
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
Breakdown Voltage
15 to 68 = 15 to 68 V
(Volts)
BR
Europe:
Suffix
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
Tel: +36 88 885 877
Email: eurocus@bourns.com
AEC-Q101 Suffix
The Americas:
Tel: +1-951 781-5500
Q = AEC-Q101 Compliant, 13-inch Reel (5000 pcs.)
Email: americus@bourns.com
www.bourns.com
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*ꢀꢀꢀ RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.
**ꢀ Bournsꢀconsidersꢀaꢀproductꢀtoꢀbeꢀ“halogenꢀfree”ꢀifꢀ(a)ꢀtheꢀBromineꢀ(Br)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀ(b)ꢀtheꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ900ꢀppmꢀorꢀless;ꢀandꢀ(c)ꢀtheꢀtotalꢀBromineꢀ(Br)ꢀꢀ
ꢀꢀꢀꢀꢀ andꢀChlorineꢀ(Cl)ꢀcontentꢀisꢀ1500ꢀppmꢀorꢀless.
***ꢀQꢀsuffixꢀforꢀapplicationsꢀrequiringꢀappropriateꢀAEC-Q101ꢀcomplianceꢀforꢀelectronicꢀlimiters.
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
P4SMA-Q Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ T = 25 °C Unless Otherwise Noted)
A
Working
Peak
Reverse
Voltage
Maximum
Reverse
Leakage
Maximum
Reverse
Voltage
Maximum
Reverse
Surge
Breakdown Voltage
Unidirectional Device
Bidirectional Device
V
(Volts)
BR
@ V
@ I
Current
RWM
RSM
Part No.
P4SMA15A-Q
P4SMA16A-Q
P4SMA18A-Q
P4SMA20A-Q
P4SMA22A-Q
P4SMA24A-Q
P4SMA27A-Q
P4SMA30A-Q
P4SMA33A-Q
P4SMA36A-Q
P4SMA39A-Q
P4SMA43A-Q
P4SMA47A-Q
P4SMA51A-Q
P4SMA56A-Q
P4SMA62A-Q
P4SMA68A-Q
Marking
15AQ
16AQ
18AQ
20AQ
22AQ
24AQ
27AQ
30AQ
33AQ
36AQ
39AQ
43AQ
47AQ
51AQ
56AQ
62AQ
68AQ
Part No.
Marking Min.
Max. @ I (mA)
V
(V)
I
(μA)
1
V
(V)
I
(A)
T
RWM
12.8
13.6
15.3
17.1
18.8
20.5
23.1
25.6
28.2
30.8
33.3
36.8
40.2
43.6
47.8
53
R
RSM
RSM
19.3
P4SMA15CA-Q
P4SMA16CA-Q
P4SMA18CA-Q
P4SMA20CA-Q
P4SMA22CA-Q
P4SMA24CA-Q
P4SMA27CA-Q
P4SMA30CA-Q
P4SMA33CA-Q
P4SMA36CA-Q
P4SMA39CA-Q
P4SMA43CA-Q
P4SMA47CA-Q
P4SMA51CA-Q
P4SMA56CA-Q
P4SMA62CA-Q
P4SMA68CA-Q
15CQ
16CQ
18CQ
20CQ
22CQ
24CQ
27CQ
30CQ
33CQ
36CQ
39CQ
43CQ
47CQ
51CQ
56CQ
62CQ
68CQ
14.3
15.2
17.1
19
15.8
16.8
18.9
21
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
21.2
22.5
25.5
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77
1
18.2
16.1
14.8
13.4
12.3
10.9
9.9
1
1
20.9
22.8
25.7
28.5
31.4
34.2
37.1
40.9
44.7
48.5
53.2
58.9
64.6
23.1
25.2
28.4
31.5
34.7
37.8
41
1
1
1
1
1
9
1
8.2
1
7.6
45.2
49.4
53.6
58.8
65.1
71.4
1
6.9
1
6.3
1
5.8
1
5.3
1
85
4.8
58.1
1
92
4.5
Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device.
2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device.
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
TJꢀ=ꢀ25ꢀ
fꢀ=ꢀ1.0ꢀMHz
C
P4SMA-Q Transient Voltage Suppressor Diode Series
Rating & Characteristic Curves
Pulse Derating Curve
Maximum Non-Repetitive Surge Current
100
60
50
75
50
25
40
30
20
10
PulseꢀWidthꢀ8.3ꢀms
SingleꢀHalfꢀSine-Wave
0
0
1
2
5
10
20
50
100
0
25
50
75
100
125
150
175
200
NumberꢀofꢀCyclesꢀatꢀ60ꢀHz
AmbientꢀTemperatureꢀ(°C)
Pulse Waveform
Typical Junction Capacitance
10000
150
T
ꢀ=ꢀ25ꢀꢀ C
J
t
ꢀ=ꢀ10 ꢀµsec.
r
BidirectionalꢀVꢀ=ꢀ0ꢀV
PulseꢀWidthꢀ(td)ꢀisꢀdefined
asꢀtheꢀpointꢀwhereꢀthe
peakꢀcurrentꢀdecaysꢀto
50ꢀ%ꢀofꢀIPPM
PeakꢀValue
ꢀIPPM
1000
100
10
UnidirectionalꢀVꢀ=ꢀ0ꢀV
100
HalfꢀValue-ꢀIPPM
2
Unidirectionalꢀ@VR
10/1000 µsec.ꢀWaveform
asꢀdefinedꢀbyꢀR.E.A.
50
t
d
0
0
Vsigꢀ=ꢀ50ꢀmVp-p
1.0
2.0
3.0
4.0
Bidirectionalꢀ@VR
100
1
tꢀ-ꢀTimeꢀ(ms)
1
10
1000
V
ꢀ-ꢀReverseꢀBreakdownꢀVoltageꢀ(V)
BR
Pulse Rating Curve
Steady State Power Derating Curve
1.0
10
0.8
0.6
1.0
0.4
0.2
TAꢀ=ꢀ25ꢀ°C
Non-repetitive
PulseꢀWaveform
ShownꢀinꢀPulseꢀWaveformꢀGraph
60ꢀHzꢀResistiveꢀor
InductiveꢀLoad
0.0
0.1
0.1ꢀµs
0
25
50
75
100
125
150
175
200
1.0ꢀµs
10ꢀµs
100ꢀµs
1.0ꢀms
10ꢀms
TL,ꢀLeadꢀTemperatureꢀ(°C)
TP,ꢀPulseꢀWidth
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
P4SMA-Q Transient Voltage Suppressor Diode Series
Product Dimensions
Recommended Footprint
CATHODEꢀBAND
(FORꢀUNIDIRECTIONALꢀ
PRODUCTSꢀONLY)
a
A
b
B
C
c
G
Dimension
SMA (DO-214AC)
2.70
a (Max.)
(0.106)
2.10
(0.083)
1.27
F
D
H
b (Min.)
c (Min.)
E
(0.050)
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
Dimension
SMA (DO-214AC)
3.99 - 4.50
(0.157 - 0.177)
2.54 - 2.79
(0.100 - 0.110)
1.25 - 1.65
(0.049 - 0.065)
0.15 - 0.31
A
B
C
D
E
F
Physical Specifications
Case...........................................Molded plastic per UL Class 94V-0
Polarity....................... Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
(0.006 - 0.012)
4.93 - 5.28
(0.194 - 0.208)
0.203
(0.008)
Environmental Specifications
MAX.
Moisture Sensitivity Level................................................................1
ESD Classification (HBM)............................................................. 3B
1.98 - 2.29
(0.078 - 0.090)
0.76 - 1.52
G
H
(0.030 - 0.060)
Typical Part Marking
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
MANUFACTURER’S
DATEꢀCODE:
TRADEMARK
ꢀꢀꢀꢀꢀYꢀ=ꢀLASTꢀDIGITꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀOFꢀYEAR
ꢀWWꢀ=ꢀWEEKꢀ
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNUMBER
YWW
XXX
DEVICEꢀID
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
P4SMA-Q Transient Voltage Suppressor Diode Series
Packaging Information
The product will be dispensed in tape and reel format (see diagram below).
P
0
P
T
E
1
d
IndexꢀHole
120ꢀ°
F
D
2
W
B
D
D
1
P
A
C
Trailer
Device
Leader
W
.......
.......
.......
.......
.......
.......
.......
.......
1
End
Start
ꢀ
MM
(INCHES)
DIMENSIONS:
ꢀ
10ꢀpitchesꢀ(min.)
10ꢀpitchesꢀ(min.)
DirectionꢀofꢀFeed
Devices are packed in accordance with EIA 481
standard specifications shown here.
SMA (DO-214AC)
13-Inch Reel
Item
Symbol
2.90 ± 0.20
(0.114 ± 0.008)
5.50 ± 0.20
(0.217 ± 0.008)
2.26 ± 0.20
(0.089 ± 0.008)
1.50 ± 0.10
(0.061 ± 0.004)
Carrier Width
Carrier Length
Carrier Depth
Sprocket Hole
A
B
C
d
330
(12.992)
50.0
(1.969)
Reel Outside Diameter
Reel Inner Diameter
Feed Hole Diameter
Sprocket Hole Position
Punch Hole Position
Punch Hole Pitch
D
D
D
MIN.
1
13.0 ± 0.20
(0.512 ± 0.008)
1.75 ± 0.10
(0.069 ± 0.004)
5.50 ± 0.05
(0.217 ± 0.002)
4.00 ± 0.10
(0.157 ± 0.004)
2
E
F
P
4.00 ± 0.10
(0.157 ± 0.004)
2.00 ± 0.05
(0.079 ± 0.002)
0.30 ± 0.10
(0.012 ± 0.004)
Sprocket Hole Pitch
Embossment Center
Overall Tape Thickness
Tape Width
P
0
1
P
T
12.00 ± 0.30
(0.472 ± 0.012)
18.4
W
Reel Width
W
1
MAX.
(0.724)
Quantity per Reel
--
5000
07/19
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
相关型号：
©2020 ICPDF网 联系我们和版权申明