SF-0603F080-2 [BOURNS]
SF-0603F Series - Fast Acting Surface Mount Fuses;型号: | SF-0603F080-2 |
厂家: | BOURNS ELECTRONIC SOLUTIONS |
描述: | SF-0603F Series - Fast Acting Surface Mount Fuses |
文件: | 总5页 (文件大小:382K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SinglFuse™ SF-0603F Series Features
■ Surface mount packaging for automated
assembly
■ Single blow fuse for overcurrent
protection
■ 1608 (EIA 0603) miniature footprint
■ Fast-acting fuse
■ UL listed
■ RoHS compliant* and halogen free**
■ Thin film chip fuse
SF-0603F Series - Fast Acting Surface Mount Fuses
Electrical Characteristics
Rated Current
Resistance
Typical
2 2
Model
Fusing Time
Rated Voltage Breaking Capacity
(Amps)
(mΩ) Typ.***
I t (A s)
DC ±0 V
SF-0603F0±0
0.±0
2±0
DC ±0 V
±0 A
0.00±
SF-0603F063
SF-0603F080
SF-0603F100
SF-0603F12±
SF-0603F1±0
SF-0603F160
SF-0603F200
SF-0603F2±0
SF-0603F300
SF-0603F31±
SF-0603F400
SF-0603F±00
0.63
0.80
1.00
1.2±
1.±0
1.60
2.00
2.±0
3.00
3.1±
4.00
±.00
173
11±
88
63
4±
42
33
24
21
19
1±
12
0.007
0.014
0.016
0.027
0.037
0.041
0.044
0.0±±
0.082
0.089
0.239
0.433
DC 32 V
DC 32 V
±0 A
Open within 1 min.
at 200 % rated
current
DC 24 V
DC 24 V
±0 A
DC 32 V
DC 32 V
±0 A
***Resistance value was measured with less than 10 % of rated current.
Reliability Testing
Parameter
Requirement
Test Method
Carrying Capacity..................................... No fusing....................................................Rated current, 4 hours
Fusing Time.............................................. Within 1 minute ..........................................200 % of its rated current
Interrupting Ability..................................... No mechanical damages ...........................After the fuse is interrupted, rated voltage applied for
30 seconds again
Bending Test............................................. No mechanical damages ...........................Distance between holding points: 90 mm,
Bending: 3 mm,1time, 30 seconds
Resistance to Solder Heat........................ ±20 %.........................................................260 °C ±± °C,10 seconds ±1 second
Solderability.............................................. 9± % coverage minimum ...........................23± °C ±± °C, 2 ±0.± second
24± °C ±± °C, 2 ±0.± second ꢀlead freeꢁ
Temperature Rise..................................... <7± ° ..........................................................100 % of its rated current, measure of surface
temperature
Resistance to Dry Heat............................. ±20 %.........................................................10± °C ±± °C,1000 hours
Resistance to Solvent............................... No evident damage on protective..............23 °C ±± °C of isopropyl alcohol, 90 seconds coating
and marking
Residual Resistance................................. 10k W or more ...........................................Measure DC resistance after fusing
Thermal Shock ......................................... DR < 10 % .................................................-20 °C / +2± °C /+12± °C /+2± °C, 10 cycles
Typical Part Marking
How to Order
Represents total content. Layout may
SF - 0603 F 050 - 2
vary.
SinglFuse™
Asia-Pacific:
Product Designator
Tel: +886-2 2±62-4117
Fax: +886-2 2±62-4116
SMD Footprint
1608 ꢀEIA 0603ꢁ size
Europe:
Fuse Blow Type
F = Fast acting
S = Slow blow
Tel: +41-41 768 ±±±±
Fax: +41-41 768 ±±10
RATING CURRENT (A)
F = 0.50
I = 0.63
K = 0.80
L = 1.00
M = 1.25
P = 1.50
N = 1.60
S = 2.00
T = 2.50
3 = 3.00
U = 3.15
W = 4.00
Y = 5.00
Rated Current
The Americas:
0±0-±00 ꢀ±00 mA - ±.00 Aꢁ
Tel: +1-9±1 781-±±00
Fax: +1-9±1 781-±700
Packaging Type
- 2 = Tape & Reel ꢀ±,000 pcs./reelꢁ
www.bourns.com
*
RoHS Directive 2002/95/EC Jan 27 2003 including Annex.
** Bourns is using the definition that appears to be the prevalent definition used as the industry standard at this time. The Bourns definition of “halogen-free” is:
Bromine (Br) content: ≤ 900 ppm; Chlorine (Cl) content: ≤ 900 ppm; Total Br + Cl content: ≤1500 ppm.
“SinglFuse” is a trademark of Bourns, Inc.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
SinglFuse™ SF-0603F Series Applications
■ Portable memory
■ LCD monitors
■ Disk drives
■ PDAs
■ Cell phones
■ Rechargeable battery packs
■ Battery chargers
■ Set top boxes
■ Digital cameras
■ DVDs
■ Industrial controllers
SF-0603F Series - Fast Acting Surface Mount Fuses
Solder Reflow Recommendations
250
Peak: 250 +0/-5 °C
230 °C or higher
200
150
100
PRE-HEATING ZONE
180 °C
150 °C
PEAK: 250 +0/-5 °C, 5 deꢀoꢁnd
PRE-HEATING ZONE: 150 to 180 °C, 90 30 deꢀoꢁnd
SOLDERING ZONE: 230 °C or higher, 30 10 deꢀoꢁnd
90 30 Seꢀoꢁnd
30 10 Seꢀoꢁnd
SOLDERING ZONE
50
HEATING TIME
Product Dimensions
Recommended Pad Layout
1.6 0.1
(.063 .004)
1.02
(.040)
0.45 0.1
(.018 .004)
0.8 0.1
(.031 .004)
1.09
(.043)
0.35 0.2
(.014 .008)
0.35 0.2
(.014 .008)
0.3 0.2
(.012 .008)
0.3 0.2
(.012 .008)
2.54
(.010)
MM
(INCHES)
DIMENSIONS:
PACKAGING: 5,000 pcs./reel
Thermal Derating Curve
Construction & Material Content
120
OVERCOAT
110
100
90
Sꢁ PLATING
FUSE ELEMENT
CERAMIC SUBSTRATE
Cu / Ni PLATING
80
-20
0
20
40
60
80
100
120
AMBIENT TEMPERATURE (°C)
Operating Temperature..................................................................................-40 °C to +105 °C
Storage Conditions
Temperature ................................................................................................+5 °C to +35 °C
Humidity...........................................................................................................40 % to 75 %
Shelf Life........................................................................... 2 years from manufacturing date
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
SF-0603F Series - Fast Acting Surface Mount Fuses
2
Average Time Current Curves
Minimum I T V Clear Time Curves
5.00 A
4.00 A
1.50 A
1.25 A
1.00 A
1.60 A
2.00 A
2.50 A
3.00 A
3.15 A
4.00 A
100
3.15 A
3.00 A
2.50 A
0.80 A
0.63 A
0.50 A
2.00 A
1.60 A
1.50 A
1.25 A
5.00 A
100
10
10
1
1.00 A
0.80 A
0.63 A
0.50 A
1
0.1
0.1
0.01
0.001
0.001
0.001
0.001
0.01
0.1
1
0.0001
0.1
1
10
100
CLEARING TIME (S)
CURRENT (A)
REV. D 03/13
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
SF-0603F Series Tape and Reel Specifications
SF-0603F Series
per EIA 481-2
Tape Dimensions
8.0 0.ꢀ
(.315 .008ꢁ
W
P
4.0 0.1
(.157 .004ꢁ
0
4.0 0.1
(.157 .004ꢁ
P
P
A
B
F
E
1
2
ꢀ.0 0.05
(.079 .00ꢀꢁ
1.1 0.1
(.043 .004ꢁ
1.9 0.1
(.075 .004ꢁ
3.5 0.05
(.138 .00ꢀꢁ
1.75 0.1
(.069 .004ꢁ
1.5 + 0.1/-0
(.059 + .004/-0ꢁ
D
T
0
0.64 0.1
(.0ꢀ5 .004ꢁ
Reel Dimensions
180 +0/-3.0
(7.087 +0/-.118ꢁ
A
60.0
(ꢀ.36ꢀꢁ
B Min.
13.0 1.0
(.51ꢀ .039ꢁ
C
W
T
9.0 1.0
(.354 .039ꢁ
11.4 ꢀ.0
(.449 .079ꢁ
MM
(INCHESꢁ
DIMENSIONS:
T
W
D
P
O
E
O
BOTTOM
TAPE
A
DIA.
TOP
TAPE
C DIA.
B
B
DIA.
F
W
RESISTOR
TAPE
T
P
P
2
1
A
PAPER
TAPE
DIRECTION OF UNREELING
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Bourns:
SF-0603F315-2 SF-0603F150-2 SF-0603F100-2 SF-0603F400-2 SF-0603F160-2 SF-0603F050-2 SF-0603F300-2
SF-0603F080-2 SF-0603F125-2 SF-0603F500-2 SF-0603F063-2 SF-0603F200-2 SF-0603F250-2
相关型号:
SF-0603F100-2
Electric Fuse, Fast Blow, 1A, 32VDC, 50A (IR), Surface Mount, HALOGEN FREE AND ROHS COMPLIANT
BOURNS
SF-0603F150-2
Electric Fuse, Fast Blow, 1.5A, 32VDC, 50A (IR), Surface Mount, HALOGEN FREE AND ROHS COMPLIANT
BOURNS
SF-0603F250-2
Electric Fuse, Fast Blow, 2.5A, 24VDC, 50A (IR), Surface Mount, HALOGEN FREE AND ROHS COMPLIANT
BOURNS
©2020 ICPDF网 联系我们和版权申明