SF-1206SP550M-2 [BOURNS]
1206 SMD TIME-LAG MULTILAYER 5.5;
| 型号： | SF-1206SP550M-2 |
| 厂家： | 
BOURNS ELECTRONIC SOLUTIONS |
| 描述： | 1206 SMD TIME-LAG MULTILAYER 5.5 |
| 文件： | 总6页 (文件大小：194K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SinglFuse™ SF-1206SP-M Series Features
■ Single blow fuse for overcurrent protection
■ 3216 (EIA 1206) footprint
■ Time Lag fuse
■ UL 248-14 compliant
F
■ RoHS compliant* and halogen free**
■ Multilayer SMD design
■ Surface mount packaging for automated assembly
SF-1206SP-M Series - Time Lag Multilayer Surface Mount Fuses
Clearing Time Characteristics for Series
Additional Information
Click these links for more information:
Clearing Time at 25 °C
% of Current Rating
Min.
Max.
100 %
200 %
300 %
800 %
4 hours
—
PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT
LIBRARY
1 second
0.1 seconds
0.002 seconds
120 seconds
3 seconds
0.05 seconds
Electrical Characteristics
Certifications
Rated Current
Resistance
(Ω) Typ.***
Rated
Voltage
Interrupting
Rating
Typical
Model
(A)
I2t (A2s)****
cUL: E198545
SF-1206SP100M-2
SF-1206SP125M-2
SF-1206SP150M-2
SF-1206SP200M-2
SF-1206SP250M-2
SF-1206SP300M-2
SF-1206SP350M-2
SF-1206SP400M-2
SF-1206SP450M-2
SF-1206SP500M-2
SF-1206SP550M-2
SF-1206SP600M-2
SF-1206SP700M-2
SF-1206SP800M-2
1.00
1.25
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
7.00
8.00
0.3582
0.1990
0.1493
0.0876
0.0647
0.0338
0.0279
0.0239
0.0199
0.0179
0.0139
0.0109
0.0100
0.0090
0.111
0.222
0.232
0.636
0.91
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
63 VDC
32VDC
24VDC
50 A @ 63 VDC
1.21
1.62
50 A @ 32 VDC
2.22
3.64
5.35
50 A @ 24 VDC
60 A @ 24 VDC
6.46
8.59
10.1
17.07
*** Resistance value measured with ≤10 % rated current at 25 °C ambient. Tolerance ±30 %.
2
**** Melting I t calculated at 0.001 second pre-arcing time.
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
WARNING Cancer
and Reproductive Harm
www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
“SinglFuse” is a trademark of Bourns, Inc.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SinglFuse™ SF-1206SP-M Series Applications
■ Portable memory
■ LCD monitors
■ Disk drives
■ Cellphones
■ LED lighting
■ Power tools
■ Rechargeable battery packs
■ Battery chargers
■ PDAs
■ Set-top boxes
■ Digital cameras
■ MP3 players
■ Industrial controllers
■ Battery Management Systems (BMS)
SF-1206SP-M Series – Time Lag Multilayer Surface Mount Fuses
2
Average Pre-Arcing Time vs. Current Curves
Average I t vs. t Curves
3.50 A
3.00 A
2.50 A
4.00 A
4.50 A
5.00 A
5.50 A
6.00 A
2.00 A
1.50 A
1.25 A
1.00 A
7.00 A
8.00 A
100000
10000
1000
100
10
1
8.00 A
7.00 A
6.00 A
5.50 A
5.00 A
4.50 A
4.00 A
3.50 A
3.00 A
2.50 A
2.00 A
1.50 A
1.25 A
1.00 A
100
10
1
0.1
0.01
0.1
0.001
0.01
1
10
100
1000
0.001
0.01
0.1
1
10
100
TIME (SECONDS)
CURRENT (A)
Environmental Characteristics
Operating Temperature................................................................................................................................................................-55 °C to +125 °C
Storage Conditions
Temperature .............................................................................................................................................................................. +5 °C to +35 °C
Humidity.........................................................................................................................................................................................40 % to 75 %
Shelf Life..........................................................................................................................................................2 years from manufacturing date
Moisture Sensitivity Level...................................................................................................................................................................................... 1
ESD Classification (HBM)............................................................................................................................................................................ Class 6
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-1206SP-M Series – Time Lag Multilayer Surface Mount Fuses
Typical Part Marking
How to Order
Packaging
SF - 1206 SP 100 M - 2
Represents total content. Layout may vary.
Reel Dimension
Specification
Quantity
7-inch Tape and Reel
EIA 481-2
SinglFuse™
Product Designator
R
SMD Footprint
3,000 pieces
-2
1206 = 3216 (EIA 1206) size
Packaging Code
Fuse Blow Type
SP = Time Lag
RATED CURRENT (A)
E = 1.00
F = 1.25
G = 1.50
I = 2.00
J = 2.50
K = 3.00
L = 3.50
M = 4.00
T = 4.50
N = 5.00
U = 5.50
O = 6.00
P = 7.00
R = 8.00
Rated Current
Recommended Pad Layout
100 ~ 800 (1.00 A ~ 8.00 A)
1.50
(.059)
Structure Type
M = Multilayer
Packaging Type
- 2 = Tape & Reel
1.80
(.071)
Product Dimensions
3.20 0.20
(.126 .008)
4.40
(.173)
MM
DIMENSIONS:
1.60 0.20
(.063 .008)
(INCHES)
1.60 0.20
(.063 .008)
0.97 0.20
(.038 .008)
0.51 0.25
(.020 .010)
MM
DIMENSIONS:
(INCHES)
Current Rating Thermal Derating Curve
105
100
95
90
85
80
75
70
65
60
55
50
-55
-35
-15
5
25
45
65
85
105
125
AMBIENT TEMPERATURE (°C)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-1206SP-M Series – Time Lag Multilayer Surface Mount Fuses
Solder Reflow Recommendations
Profile Feature
Pb-Free Assembly
T
T
p
T
-5 °C
Preheat / Soak:
c
t
p
MAX. RAMP UP RATE = 3 °C/s
Temperature Min. (T
)
150 °C
200 °C
60~120 seconds
smin
MAX. RAMP DOWN RATE = 6 °C/s
Temperature Max. (T
)
smax
to T )
smax
L
T
t
L
Time (t ) from (T
smax
PREHEAT AREA
s
smin
Ramp Up Rate (T to T )
3 °C / second max.
L
p
T
smin
Liquidous Temperature (T )
217 °C
L
Time (t ) maintained above T
60~150 seconds
L
L
t
s
Peak Package Body
260 °C
Temperature (T )
p
Time (t )* within 5 °C of the
p
25
specified classification temperature 30 seconds*
(T )
TIME 25 °C TO PEAK
c
TIME
Ramp Down Rate (T to T )
6 °C / second max.
8 minutes max.
p
L
Time 25 °C to Peak Temperature
* Tolerance for peak profile temperature (Tp ) is defined as a
supplier minimum and a user maximum.
Recommended Temperature Profile for Wave Soldering
Wave soldering is suitable for 1206 size models.
10 sec. max.
260
150
PREHEATING
120 seconds
TIME
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-1206SP-M Series – Time Lag Multilayer Surface Mount Fuses
Reliability Testing
No.
Test
Requirement
DCR change ≤ ±10 %
Test Condition
Test Reference
MIL-STD-202
Method 210
Soldering heat
resistance
1
One dip at 260 °C for 60 seconds
No mechanical damage
MIL-STD-202
Method 208
2
3
4
5
6
7
Solderability
Minimum 95 % coverage
One dip at 245 °C for 5 seconds
100 cycles between -65 °C and +125 °C
10 cycles
DCR change ≤ ±10 %
No mechanical damage
MIL-STD-202
Method 107
Thermal shock
Moisture resistance
Salt spray
DCR change ≤ ±15 %
No excessive corrosion
MIL-STD-202
Method 106
DCR change ≤ ±10 %
No excessive corrosion
MIL-STD-202
Method 101
48 hour exposure, 5 % salt solution
DCR change ≤ ±10 %
No mechanical damage
0.4 inch D.A. or 30 G between
5-3000 Hz
MIL-STD-202
Method 204
Mechanical vibration
Mechanical shock
DCR change ≤ ±10 %
No mechanical damage
MIL-STD-202
Method 213
1500 G, 0.5 ms, half-sine shocks
No electrical “opens” during testing
Voltage drop change shall be less
than ±20 % of initial value
80 % rated current (75 % for < 1 A fuses)
for 2000 hours at ambient temperature
between +20 °C and +30 °C
Refer to STP
document
8
Life
REV. E 03/21
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
P[ZꢀHɉSPH[LZꢀꢁJVSSLJ[P]LS`ꢂꢀ¸)V\YUZ¹ꢃꢄ
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
^P[OV\[ꢀUV[PJLꢄꢀꢀ<ZLYZꢀZOV\SKꢀJOLJRꢀMVYꢀHUKꢀVI[HPUꢀ[OLꢀSH[LZ[ꢀYLSL]HU[ꢀPUMVYTH[PVUꢀHUKꢀ]LYPM`ꢀ[OH[ꢀZ\JOꢀPUMVYTH[PVUꢀPZꢀJ\YYLU[ꢀ
and complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns®ꢀWYVK\J[ꢀPUꢀHꢀ\ZLYꢀHWWSPJH[PVUꢀTH`ꢀ]HY`ꢀ
®
MYVTꢀ[OLꢀKH[HꢀZOLL[ꢀJOHYHJ[LYPZ[PJZꢀHUKꢀWHYHTL[LYZꢀK\Lꢀ[VꢀꢁPꢃꢀ[OLꢀJVTIPUH[PVUꢀVMꢀ[OLꢀ)V\YUZ product with other components
®
PUꢀ[OLꢀ\ZLY»ZꢀHWWSPJH[PVUꢂꢀVYꢀꢁPPꢃꢀ[OLꢀLU]PYVUTLU[ꢀVMꢀ[OLꢀ\ZLYꢀHWWSPJH[PVUꢀP[ZLSMꢄꢀꢀ;OLꢀJOHYHJ[LYPZ[PJZꢀHUKꢀWHYHTL[LYZꢀVMꢀHꢀ)V\YUZ
WYVK\J[ꢀHSZVꢀJHUꢀHUKꢀKVꢀ]HY`ꢀPUꢀKPɈLYLU[ꢀHWWSPJH[PVUZꢀHUKꢀHJ[\HSꢀWLYMVYTHUJLꢀTH`ꢀ]HY`ꢀV]LYꢀ[PTLꢄꢀꢀ<ZLYZꢀZOV\SKꢀHS^H`Zꢀ]LYPM`ꢀ
the actual performance of the Bourns®ꢀWYVK\J[ꢀPUꢀ[OLPYꢀZWLJPÄJꢀKL]PJLZꢀHUKꢀHWWSPJH[PVUZꢂꢀHUKꢀTHRLꢀ[OLPYꢀV^UꢀPUKLWLUKLU[ꢀ
Q\KNTLU[ZꢀYLNHYKPUNꢀ[OLꢀHTV\U[ꢀVMꢀHKKP[PVUHSꢀ[LZ[ꢀTHYNPUꢀ[VꢀKLZPNUꢀPU[Vꢀ[OLPYꢀKL]PJLꢀVYꢀHWWSPJH[PVUꢀ[VꢀJVTWLUZH[LꢀMVYꢀ
KPɈLYLUJLZꢀIL[^LLUꢀSHIVYH[VY`ꢀHUKꢀYLHSꢀ^VYSKꢀJVUKP[PVUZꢄ
®
<USLZZꢀ)V\YUZꢀOHZꢀL_WSPJP[S`ꢀKLZPNUH[LKꢀHUꢀPUKP]PK\HSꢀ)V\YUZ product as meeting the requirements of a particular industry
Z[HUKHYKꢀꢁLꢄNꢄꢂꢀ0:6ꢅ;:ꢀꢆꢇ ꢈ ꢃꢀVYꢀHꢀWHY[PJ\SHYꢀX\HSPÄJH[PVUꢀꢁLꢄNꢄꢂꢀ<3ꢀSPZ[LKꢀVYꢀYLJVNUPaLKꢃꢂꢀ)V\YUZꢀPZꢀUV[ꢀYLZWVUZPISLꢀMVYꢀHU`ꢀ
®
MHPS\YLꢀVMꢀHUꢀPUKP]PK\HSꢀ)V\YUZ ꢀWYVK\J[ꢀ[VꢀTLL[ꢀ[OLꢀYLX\PYLTLU[ZꢀVMꢀZ\JOꢀPUK\Z[Y`ꢀZ[HUKHYKꢀVYꢀWHY[PJ\SHYꢀX\HSPÄJH[PVUꢄꢀꢀ<ZLYZꢀ
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
[OLPYꢀKL]PJLZꢀVYꢀHWWSPJH[PVUZꢄ
Bourns®ꢀWYVK\J[ZꢀHYLꢀUV[ꢀYLJVTTLUKLKꢂꢀH\[OVYPaLKꢀVYꢀPU[LUKLKꢀMVYꢀ\ZLꢀPUꢀU\JSLHYꢂꢀSPMLZH]PUNꢂꢀSPMLꢉJYP[PJHSꢀVYꢀSPMLꢉZ\Z[HPUPUNꢀ
HWWSPJH[PVUZꢂꢀUVYꢀPUꢀHU`ꢀV[OLYꢀHWWSPJH[PVUZꢀ^OLYLꢀMHPS\YLꢀVYꢀTHSM\UJ[PVUꢀTH`ꢀYLZ\S[ꢀPUꢀWLYZVUHSꢀPUQ\Y`ꢂꢀKLH[OꢂꢀVYꢀZL]LYLꢀWYVWLY[`ꢀ
VYꢀLU]PYVUTLU[HSꢀKHTHNLꢄꢀꢀ<USLZZꢀL_WYLZZS`ꢀHUKꢀZWLJPÄJHSS`ꢀHWWYV]LKꢀPUꢀ^YP[PUNꢀI`ꢀ[^VꢀH\[OVYPaLKꢀ)V\YUZꢀYLWYLZLU[H[P]LZꢀ
on a case-by-case basis, use of any Bourns®ꢀWYVK\J[ZꢀPUꢀZ\JOꢀ\UH\[OVYPaLKꢀHWWSPJH[PVUZꢀTPNO[ꢀUV[ꢀILꢀZHMLꢀHUKꢀ[O\ZꢀPZꢀH[ꢀ
[OLꢀ\ZLY»ZꢀZVSLꢀYPZRꢄꢀꢀ3PMLꢉJYP[PJHSꢀHWWSPJH[PVUZꢀPUJS\KLꢀKL]PJLZꢀPKLU[PÄLKꢀI`ꢀ[OLꢀ<ꢄ:ꢄꢀ-VVKꢀHUKꢀ+Y\Nꢀ(KTPUPZ[YH[PVUꢀHZꢀ*SHZZꢀ000ꢀ
KL]PJLZꢀHUKꢀNLULYHSS`ꢀLX\P]HSLU[ꢀJSHZZPÄJH[PVUZꢀV\[ZPKLꢀVMꢀ[OLꢀ<UP[LKꢀ:[H[LZꢄ
®
)V\YUZꢀL_WYLZZS`ꢀPKLU[PÄLZꢀ[OVZLꢀ)V\YUZ ꢀZ[HUKHYKꢀWYVK\J[Zꢀ[OH[ꢀHYLꢀZ\P[HISLꢀMVYꢀ\ZLꢀPUꢀH\[VTV[P]LꢀHWWSPJH[PVUZꢀVUꢀZ\JOꢀ
WYVK\J[Z»ꢀKH[HꢀZOLL[ZꢀPUꢀ[OLꢀZLJ[PVUꢀLU[P[SLKꢀ¸(WWSPJH[PVUZꢄ¹ꢀꢀ<USLZZꢀL_WYLZZS`ꢀHUKꢀZWLJPÄJHSS`ꢀHWWYV]LKꢀPUꢀ^YP[PUNꢀI`ꢀ[^Vꢀ
®
H\[OVYPaLKꢀ)V\YUZꢀYLWYLZLU[H[P]LZꢀVUꢀHꢀJHZLꢉI`ꢉJHZLꢀIHZPZꢂꢀ\ZLꢀVMꢀHU`ꢀV[OLYꢀ)V\YUZ ꢀZ[HUKHYKꢀWYVK\J[ZꢀPUꢀHUꢀH\[VTV[P]Lꢀ
HWWSPJH[PVUꢀTPNO[ꢀUV[ꢀILꢀZHMLꢀHUKꢀ[O\ZꢀPZꢀUV[ꢀYLJVTTLUKLKꢂꢀH\[OVYPaLKꢀVYꢀPU[LUKLKꢀHUKꢀPZꢀH[ꢀ[OLꢀ\ZLY»ZꢀZVSLꢀYPZRꢄꢀꢀ0Mꢀ)V\YUZꢀ
L_WYLZZS`ꢀPKLU[PÄLZꢀHꢀZ\IꢉJH[LNVY`ꢀVMꢀH\[VTV[P]LꢀHWWSPJH[PVUꢀPUꢀ[OLꢀKH[HꢀZOLL[ꢀMVYꢀP[ZꢀZ[HUKHYKꢀWYVK\J[ZꢀꢁZ\JOꢀHZꢀPUMV[HPUTLU[ꢀ
®
VYꢀSPNO[PUNꢃꢂꢀZ\JOꢀPKLU[PÄJH[PVUꢀTLHUZꢀ[OH[ꢀ)V\YUZꢀOHZꢀYL]PL^LKꢀP[ZꢀZ[HUKHYKꢀWYVK\J[ꢀHUKꢀOHZꢀKL[LYTPULKꢀ[OH[ꢀPMꢀZ\JOꢀ)V\YUZ
Z[HUKHYKꢀWYVK\J[ꢀPZꢀJVUZPKLYLKꢀMVYꢀWV[LU[PHSꢀ\ZLꢀPUꢀH\[VTV[P]LꢀHWWSPJH[PVUZꢂꢀP[ꢀZOV\SKꢀVUS`ꢀILꢀ\ZLKꢀPUꢀZ\JOꢀZ\IꢉJH[LNVY`ꢀVMꢀ
®
H\[VTV[P]LꢀHWWSPJH[PVUZꢄꢀꢀ(U`ꢀYLMLYLUJLꢀ[Vꢀ)V\YUZ ꢀZ[HUKHYKꢀWYVK\J[ꢀPUꢀ[OLꢀKH[HꢀZOLL[ꢀHZꢀJVTWSPHU[ꢀ^P[Oꢀ[OLꢀ(,*ꢉ8ꢀZ[HUKHYKꢀ
VYꢀ¸H\[VTV[P]LꢀNYHKL¹ꢀKVLZꢀUV[ꢀI`ꢀP[ZLSMꢀTLHUꢀ[OH[ꢀ)V\YUZꢀOHZꢀHWWYV]LKꢀZ\JOꢀWYVK\J[ꢀMVYꢀ\ZLꢀPUꢀHUꢀH\[VTV[P]LꢀHWWSPJH[PVUꢄ
Bourns®ꢀZ[HUKHYKꢀWYVK\J[ZꢀHYLꢀUV[ꢀ[LZ[LKꢀ[VꢀJVTWS`ꢀ^P[Oꢀ<UP[LKꢀ:[H[LZꢀ-LKLYHSꢀ(]PH[PVUꢀ(KTPUPZ[YH[PVUꢀZ[HUKHYKZꢀNLULYHSS`ꢀ
VYꢀHU`ꢀV[OLYꢀNLULYHSS`ꢀLX\P]HSLU[ꢀNV]LYUTLU[HSꢀVYNHUPaH[PVUꢀZ[HUKHYKꢀHWWSPJHISLꢀ[VꢀWYVK\J[ZꢀKLZPNULKꢀVYꢀTHU\MHJ[\YLKꢀMVYꢀ
®
\ZLꢀPUꢀHPYJYHM[ꢀVYꢀZWHJLꢀHWWSPJH[PVUZꢄꢀ)V\YUZꢀL_WYLZZS`ꢀPKLU[PÄLZꢀ)V\YUZ standard products that are suitable for use in aircraft
VYꢀZWHJLꢀHWWSPJH[PVUZꢀVUꢀZ\JOꢀWYVK\J[Z»ꢀKH[HꢀZOLL[ZꢀPUꢀ[OLꢀZLJ[PVUꢀLU[P[SLKꢀ¸(WWSPJH[PVUZꢄ¹ꢀꢀ<USLZZꢀL_WYLZZS`ꢀHUKꢀZWLJPÄJHSS`ꢀ
®
HWWYV]LKꢀPUꢀ^YP[PUNꢀI`ꢀ[^VꢀH\[OVYPaLKꢀ)V\YUZꢀYLWYLZLU[H[P]LZꢀVUꢀHꢀJHZLꢉI`ꢉJHZLꢀIHZPZꢂꢀ\ZLꢀVMꢀHU`ꢀV[OLYꢀ)V\YUZ standard
WYVK\J[ꢀPUꢀHUꢀHPYJYHM[ꢀVYꢀZWHJLꢀHWWSPJH[PVUꢀTPNO[ꢀUV[ꢀILꢀZHMLꢀHUKꢀ[O\ZꢀPZꢀUV[ꢀYLJVTTLUKLKꢂꢀH\[OVYPaLKꢀVYꢀPU[LUKLKꢀHUKꢀPZꢀH[ꢀ
the user’s sole risk.
®
;OLꢀ\ZLꢀHUKꢀSL]LSꢀVMꢀ[LZ[PUNꢀHWWSPJHISLꢀ[Vꢀ)V\YUZ custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns®ꢀJ\Z[VTꢀWYVK\J[ZꢀHYLꢀZWLJPHSS`ꢀKLZPNULKꢄꢀꢀ(IZLU[ꢀHꢀ^YP[[LUꢀHNYLLTLU[ꢀIL[^LLUꢀ)V\YUZꢀ
®
HUKꢀ[OLꢀ\ZLYꢀYLNHYKPUNꢀ[OLꢀ\ZLꢀHUKꢀSL]LSꢀVMꢀZ\JOꢀ[LZ[PUNꢂꢀ[OLꢀHIV]LꢀWYV]PZPVUZꢀHWWSPJHISLꢀ[Vꢀ)V\YUZ standard products shall
also apply to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns®ꢀWYVK\J[ZꢀVYꢀ[LJOUVSVN`ꢀMVYꢀ\ZLꢀPUꢀHJ[P]P[PLZꢀ^OPJOꢀPU]VS]Lꢀ[OLꢀ
KLZPNUꢂꢀKL]LSVWTLU[ꢂꢀWYVK\J[PVUꢂꢀ\ZLꢀVYꢀZ[VJRWPSPUNꢀVMꢀU\JSLHYꢂꢀJOLTPJHSꢀVYꢀIPVSVNPJHSꢀ^LHWVUZꢀVYꢀTPZZPSLZꢂꢀUVYꢀZOHSSꢀ[OL`ꢀ\ZLꢀ
Bourns®ꢀWYVK\J[ZꢀVYꢀ[LJOUVSVN`ꢀPUꢀHU`ꢀMHJPSP[`ꢀ^OPJOꢀLUNHNLZꢀPUꢀHJ[P]P[PLZꢀYLSH[PUNꢀ[VꢀZ\JOꢀKL]PJLZꢄꢀꢀ;OLꢀMVYLNVPUNꢀYLZ[YPJ[PVUZꢀ
HWWS`ꢀ[VꢀHSSꢀ\ZLZꢀHUKꢀHWWSPJH[PVUZꢀ[OH[ꢀ]PVSH[LꢀUH[PVUHSꢀVYꢀPU[LYUH[PVUHSꢀWYVOPIP[PVUZꢂꢀPUJS\KPUNꢀLTIHYNVZꢀVYꢀPU[LYUH[PVUHSꢀ
®
YLN\SH[PVUZꢄꢀꢀ-\Y[OLYꢂꢀ)V\YUZ products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
WYPVYꢀH\[OVYPaH[PVUꢀMYVTꢀ)V\YUZꢀHUKꢅVYꢀ[OLꢀ<ꢄ:ꢄꢀ.V]LYUTLU[ꢂꢀILꢀYLZVSKꢂꢀ[YHUZMLYYLKꢂꢀVYꢀYLꢉL_WVY[LKꢀ[VꢀHU`ꢀWHY[`ꢀUV[ꢀLSPNPISLꢀ
[VꢀYLJLP]Lꢀ<ꢄ:ꢄꢀJVTTVKP[PLZꢂꢀZVM[^HYLꢂꢀHUKꢀ[LJOUPJHSꢀKH[Hꢄ
;Vꢀ[OLꢀTH_PT\TꢀL_[LU[ꢀWLYTP[[LKꢀI`ꢀHWWSPJHISLꢀSH^ꢂꢀ)V\YUZꢀKPZJSHPTZꢀꢁPꢃꢀHU`ꢀHUKꢀHSSꢀSPHIPSP[`ꢀMVYꢀZWLJPHSꢂꢀW\UP[P]LꢂꢀJVUZLX\LU[PHSꢂꢀ
PUJPKLU[HSꢀVYꢀPUKPYLJ[ꢀKHTHNLZꢀVYꢀSVZ[ꢀYL]LU\LZꢀVYꢀSVZ[ꢀWYVÄ[ZꢂꢀHUKꢀꢁPPꢃꢀHU`ꢀHUKꢀHSSꢀPTWSPLKꢀ^HYYHU[PLZꢂꢀPUJS\KPUNꢀPTWSPLKꢀ^HYYHU[PLZꢀ
VMꢀÄ[ULZZꢀMVYꢀWHY[PJ\SHYꢀW\YWVZLꢂꢀUVUꢉPUMYPUNLTLU[ꢀHUKꢀTLYJOHU[HIPSP[`ꢄ
)RUꢀ\RXUꢀFRQYHQLHQFHꢁꢀFRSLHVꢀRIꢀWKLVꢀ/HJDOꢀ'LVFODLPHUꢀ1RWLFHꢀZLWKꢀ*HUPDQꢁꢀ6SDQLVKꢁꢀ-DSDQHVHꢁꢀ7UDGLWLRQDOꢀ&KLQHVHꢀDQGꢀ6LPSOLÀHGꢀ&KLQHVHꢀ
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
*ꢆꢊꢋꢌꢀꢍꢋꢅꢆꢊꢅꢆꢎ9
相关型号：
SF-1210S100W-2
Electric Fuse, Slow Blow, 1A, 125VAC, 65VDC, 100A (IR), Surface Mount, HALOGEN FREE AND ROHS COMPLIANT
BOURNS
©2020 ICPDF网 联系我们和版权申明