SMAJ45CA-QH [BOURNS]

TVS DIODE 45V 72.7V SMA;


型号：	SMAJ45CA-QH
厂家：	BOURNS ELECTRONIC SOLUTIONS
描述：	TVS DIODE 45V 72.7V SMA 电视
文件：	总6页 (文件大小：533K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Features

Applications

nꢀ SurfaceꢀMountꢀSMAꢀpackage

nꢀꢀStandoffꢀVoltage:ꢀ5ꢀtoꢀ220ꢀvolts

nꢀ PowerꢀDissipation:ꢀ400ꢀwatts

nꢀ RoHSꢀcompliant*

nꢀ Protectionꢀofꢀpowerꢀbuses

nꢀꢀProtectionꢀofꢀI/Oꢀinterfaces

nꢀ Overvoltageꢀtransientꢀprotection

nꢀ Telecom,ꢀcomputer,ꢀindustrialꢀandꢀꢀ

ꢀ

consumerꢀelectronicsꢀapplications

nꢀ AEC-Q101ꢀcompliant**

SMAJ-Q Transient Voltage Suppressor Diode Series

General Information

Agency Recognition

Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection

applications, in compact chip package DO-214AC (SMA) size format. The Transient Voltage

Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 220 V.

Typical fast response times are less than 1.0 picosecond from 0 V to Breakdown Voltage.

Description

File Number: E153537

Bourns^®Chip Diodes conform to JEDEC standards, are easy to handle with standard pick

and place equipment and the ﬂat conﬁguration minimizes roll away.

Electrical Characteristics (@ T = 25 °C Unless Otherwise Noted)

Parameter

Symbol

Value

Unit

(Note 1,2)

Minimum Peak Pulse Power Dissipation (T = 1 ms)

400

Watts

Peak Forward Surge Current

8.3 ms Single Half Sine Wave Superimposed on Rated Load

(JEDEC Method)

Amps

FSM

(Note 3)

Operating Temperature Range

Storage Temperature Range

-55 to +150

°C

STG

1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 °C per Pulse Derating Curve.

2. Mounted on 5.0 mm (0.03 mm thick) copper pads to each terminal.

3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).

Electrical Characteristics (@ T = 25 °C Unless Otherwise Noted)

Maximum Maximum Maximum Maximum

Working Maximum

Breakdown

Voltage

Clamping

Voltage

Peak

Pulse

Clamping

Voltage

Peak

Pulse

Peak

Reverse

Leakage

Unidirectional Device

Bidirectional Device

Reverse

Voltage

(Volts)

@ I

Current

(10/1000 µs)

@ I

Current

(8/20 µs)

@ V

RWM

(10/1000 µs)

(8/20 µs)

@ I

(mA)

(V)

Part No.

Marking

Part No.

Marking Min. Max.

(V)

RWM

(μA)

(A)

SMAJ5.0A-Q

SMAJ6.0A-Q

SMAJ6.5A-Q

SMAJ7.0A-Q

SMAJ7.5A-Q

SMAJ8.0A-Q

SMAJ8.5A-Q

SMAJ9.0A-Q

SMAJ10A-Q

SMAJ11A-Q

SMAJ12A-Q

SMAJ13A-Q

SMAJ14A-Q

SMAJ15A-Q

SMAJ16A-Q

HEQ

HGQ

HKQ

HMQ

HPQ

HRQ

HTQ

HVQ

HXQ

HZQ

IEQ

SMAJ5.0CA-Q

SMAJ6.0CA-Q

SMAJ6.5CA-Q

SMAJ7.0CA-Q

SMAJ7.5CA-Q

SMAJ8.0CA-Q

SMAJ8.5CA-Q

SMAJ9.0CA-Q

SMAJ10CA-Q

SMAJ11CA-Q

SMAJ12CA-Q

SMAJ13CA-Q

SMAJ14CA-Q

SMAJ15CA-Q

SMAJ16CA-Q

TEQ

TGQ

TKQ

TMQ

TPQ

TRQ

TTQ

TVQ

TXQ

TZQ

UEQ

UGQ

UKQ

UMQ

UPQ

6.40 7.00

6.67 7.37

7.22 7.98

7.78 8.60

8.33 9.21

8.89 9.83

9.44 10.4

10.0 11.1

11.1 12.3

12.2 13.5

13.3 14.7

14.4 15.9

15.6 17.2

16.7 18.5

17.8 19.7

5.0

6.0

6.5

7.0

7.5

8.0

8.5

9.0

800

500

200

100

1.0

9.2

43.5

38.8

35.7

33.3

31.0

29.4

27.8

26.0

23.5

22.0

20.1

18.6

17.2

16.4

15.4

12.0

13.4

14.6

15.6

16.8

17.7

18.7

20.0

22.1

23.7

25.9

28.0

30.2

31.7

33.8

217.5

194.0

178.5

166.5

155.0

147.0

139.0

130.0

117.5

110.0

100.5

93.0

10.3

11.2

12.0

12.9

13.6

14.4

15.4

17.0

18.2

19.9

21.5

23.2

24.4

26.0

1.0

IGQ

IKQ

IMQ

IPQ

86.0

82.0

77.0

Notes: 1. Sufﬁx ‘A’ denotes a 5 % tolerance unidirectional device.

2. Sufﬁx ‘CA’ denotes a 5 % tolerance bidirectional device.

~ Continued on next page ~

WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

*RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.

**”Q”ꢀpartꢀnumberꢀsufﬁxꢀindicatesꢀAEC-Q101ꢀcompliance.

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.ꢀ

Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspeciﬁcꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀthisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.

SMAJ-Q Transient Voltage Suppressor Diode Series

Electrical Characteristics (@ T = 25 °C Unless Otherwise Noted) - Continued

Maximum Maximum Maximum Maximum

Working Maximum

Clamping

Voltage

Peak

Pulse

Clamping

Voltage

Peak

Pulse

Breakdown Voltage

(Volts)

Peak

Reverse

Unidirectional Device

Bidirectional Device

Reverse Leakage

@ I

Current

(10/1000 µs)

@ I

Current

(8/20 µs)

Voltage

@ V

RWM

(10/1000 µs)

(8/20 µs)

@ I

(mA)

(V)

RWM

(V)

Part No.

Marking

Part No.

Marking Min. Max.

(μA)

(A)

14.5

13.7

12.3

11.3

10.3

9.5

8.8

8.3

7.5

6.9

6.2

5.8

5.5

5.2

4.9

4.6

4.3

4.1

3.9

3.5

3.3

3.2

2.9

2.7

2.5

2.3

2.1

1.9

1.6

1.5

1.4

1.2

1.1

(A)

SMAJ17A-Q

SMAJ18A-Q

SMAJ20A-Q

SMAJ22A-Q

SMAJ24A-Q

SMAJ26A-Q

SMAJ28A-Q

SMAJ30A-Q

SMAJ33A-Q

SMAJ36A-Q

SMAJ40A-Q

SMAJ43A-Q

SMAJ45A-Q

SMAJ48A-Q

SMAJ51A-Q

SMAJ54A-Q

SMAJ58A-Q

SMAJ60A-Q

SMAJ64A-Q

SMAJ70A-Q

SMAJ75A-Q

SMAJ78A-Q

SMAJ85A-Q

SMAJ90A-Q

SMAJ100A-Q

SMAJ110A-Q

SMAJ120A-Q

SMAJ130A-Q

SMAJ150A-Q

SMAJ160A-Q

SMAJ170A-Q

SMAJ180A-Q

SMAJ200A-Q

SMAJ220A-Q

IRQ

ITQ

SMAJ17CA-Q

SMAJ18CA-Q

SMAJ20CA-Q

SMAJ22CA-Q

SMAJ24CA-Q

SMAJ26CA-Q

SMAJ28CA-Q

SMAJ30CA-Q

SMAJ33CA-Q

SMAJ36CA-Q

SMAJ40CA-Q

SMAJ43CA-Q

SMAJ45CA-Q

SMAJ48CA-Q

SMAJ51CA-Q

SMAJ54CA-Q

SMAJ58CA-Q

SMAJ60CA-Q

SMAJ64CA-Q

SMAJ70CA-Q

SMAJ75CA-Q

SMAJ78CA-Q

SMAJ85CA-Q

SMAJ90CA-Q

SMAJ100CA-Q

SMAJ110CA-Q

SMAJ120CA-Q

SMAJ130CA-Q

SMAJ150CA-Q

SMAJ160CA-Q

SMAJ170CA-Q

SMAJ180CA-Q

SMAJ200CA-Q

SMAJ220CA-Q

URQ

UTQ

UVQ

UXQ

UZQ

VEQ

VGQ

VKQ

VMQ

VPQ

VRQ

VTQ

VVQ

VXQ

VZQ

WEQ

WGQ

WKQ

WMQ

WPQ

WRQ

WTQ

WVQ

WXQ

WZQ

XEQ

XGQ

XKQ

XMQ

XPQ

XRQ

XTQ

XVQ

XXQ

18.9 20.9

20.0 22.1

22.2 24.5

24.4 26.9

26.7 29.5

28.9 31.9

31.1 34.4

33.3 36.8

36.7 40.6

1.0

27.6

29.2

32.4

35.5

38.9

42.1

45.4

48.4

53.3

58.1

64.5

69.4

72.7

77.4

82.4

87.1

93.6

96.8

103

113

35.9

72.5

68.5

61.5

56.5

51.5

47.5

44.0

41.5

37.5

34.5

31.0

29.0

27.5

26.0

24.5

23.0

21.5

20.5

19.5

17.5

16.5

16.0

14.5

13.5

12.5

11.5

10.5

9.5

38.0

IVQ

42.1

IXQ

46.2

IZQ

50.6

JEQ

JGQ

JKQ

JMQ

JPQ

JRQ

JTQ

JVQ

JXQ

JZQ

REQ

RGQ

RKQ

RMQ

RPQ

RRQ

RTQ

RVQ

RXQ

RZQ

SEQ

SGQ

SKQ

SMQ

SPQ

SRQ

STQ

SVQ

SXQ

54.7

59.0

62.9

69.3

44.2

75.5

44.4 49.1

47.8 52.8

83.9

90.2

55.3

94.5

53.3 58.9

56.7 62.7

100.6

107.1

113.2

121.7

125.8

133.9

146.9

157.3

163.8

178.1

189.8

210.6

230.1

250.9

271.7

315.9

336.7

357.5

379.6

421.2

462.8

66.3

64.4 71.2

66.7 73.7

71.1 78.6

77.8 86.0

83.3 92.1

86.7 95.8

94.4 104

121

126

137

146

162

177

193

209

243

259

275

292

324

356

100

111

122

133

144

167

178

189

201

224

246

111

123

135

147

159

185

197

209

222

247

272

100

110

120

130

150

160

170

180

200

220

8.0

7.5

7.0

6.0

5.5

Notes: 1. Sufﬁx ‘A’ denotes a 5 % tolerance unidirectional device.

2. Sufﬁx ‘CA’ denotes a 5 % tolerance bidirectional device.

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.ꢀ

SMAJ-Q Transient Voltage Suppressor Diode Series

3312 - 2 mm SMD Trimming Potentiometer

Performance Graphs

Peak Pulse Power Derating Curve

Maximum Non-Repetitive Surge Current

100

ꢀꢀ5

PulseꢀWidthꢀ8.3ꢀms

SingleꢀHalfꢀSine-Wave

10ꢀxꢀ1000ꢀWaveformꢀasꢀDefined

byꢀR.E.A.

NumberꢀofꢀCyclesꢀatꢀ60ꢀHz

100

125

150

AmbientꢀTemperatureꢀ( °C)

Pulse Waveform

Typical Junction Capacitance

10000

TR=10ꢀµs

Bidirectional

v-0v

Peakꢀvalueꢀ(IRSM)

100

IRSM

Halfꢀvalue=

1000

Unidirectional

@ꢀVR

Unidirectional

v-0v

Pulseꢀwidthꢀ(TP)ꢀ

isꢀdefinedꢀasꢀthatꢀpointꢀ

whereꢀtheꢀpeakꢀcurrent

decaysꢀtoꢀ50ꢀ%ꢀofꢀIPSM.

100

10ꢀxꢀ1000ꢀwaveform

asꢀdefinedꢀbyꢀR.E.A.

T ꢀ=ꢀ25ꢀ°C

TA=25ꢀ°C

fꢀ=ꢀ1.0ꢀMHz

Bidirectional

@ꢀVR

ꢀ=ꢀ50ꢀmVp-p

sig

1.0

2.0

3.0

4.0

100

1000

T,ꢀTimeꢀ(ms)

ꢀ-ꢀReverseꢀBreakdownꢀVoltageꢀ(V)

Pulse Rating Curve

Steady State Power Derating Curve

ꢀꢀ10

1.0

0.8

0.6

1.0

0.4

0.2

T ꢀ=ꢀ25ꢀ°C

Non-repetitive

PulseꢀWaveform

ShownꢀinꢀPulseꢀWaveformꢀGraph

0.0

0.1

0.1ꢀµs

100

125

150

1.0ꢀµs

10ꢀµs

100ꢀµs

1.0ꢀms

10ꢀms

-ꢀLeadꢀTemperatureꢀ(°C)

T ,ꢀPulseꢀWidthꢀ(Seconds)

Lꢀ

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.ꢀ

SMAJ-Q Transient Voltage Suppressor Diode Series

3312 - 2 mm SMD Trimming Potentiometer

Product Dimensions

Recommended Footprint

Dimension

SMA (DO-214AC)

2.70

A (Max.)

(0.106)

2.10

(0.083)

1.27

B (Min.)

C (Min.)

(0.050)

Dimension

SMA (DO-214AC)

3.99 - 4.50

(0.157 - 0.177)

2.54 - 2.79

(0.100 - 0.110)

1.25 - 1.65

(0.049 - 0.065)

0.15 - 0.31

ꢀ

(INCHES)

DIMENSIONS:

ꢀ

Physical Speciﬁcations

Case...........................................Molded plastic per UL Class 94V-0

Polarity....................... Cathode band indicates unidirectional device

No cathode band indicates bidirectional device

(0.006 - 0.012)

4.93 - 5.28

(0.194 - 0.208)

0.203

(0.008)

How to Order

MAX.

SMAJ 12 CA - Q

1.98 - 2.29

(0.078 - 0.090)

0.76 - 1.52

Package

SMAJ = SMA/DO-214AC

(0.030 - 0.060)

Working Peak Reverse Voltage

12 = 12 V

(Volts)

RWM

Sufﬁx

ꢀ

(INCHES)

DIMENSIONS:

A = 5 % Tolerance Unidirectional Device

CA = 5 % Tolerance Bidirectional Device

ꢀ

AEC-Q101 Sufﬁx

= AEC-Q101 Compliant, 13-inch Reel

Typical Part Marking

QH = AEC-Q101 Compliant, 7-inch Reel

(available only for 12 V to 58 V models)

DATEꢀCODE:

MANUFACTURER’S

TRADEMARK

ꢀꢀꢀꢀYꢀ=ꢀLASTꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀDIGITꢀOFꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀYEAR

Environmental Speciﬁcations

WWꢀ=ꢀWEEKꢀ

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀNUMBER

Moisture Sensitivity Level................................................................1

ESD Classiﬁcation (HBM)............................................................. 3B

YWW

XXX

DEVICEꢀID

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.ꢀ

SMAJ-Q Transient Voltage Suppressor Diode Series

CDDFN5-0504N - TVS/Steering Diode Array

Packaging Information

The product will be dispensed in tape and reel format (see diagram below).

IndexꢀHole

120ꢀ°

Unidirectional

Product

Trailer

Device

Leader

Orientation

.......

End

Start

ꢀ

(INCHES)

DIMENSIONS:

ꢀ

10ꢀpitchesꢀ(min.)

DirectionꢀofꢀFeed

Devices are packed in accordance with EIA 481

standard speciﬁcations shown here.

SMA (DO-214AC)

Item

Carrier Width

Symbol

7-Inch Reel

13-Inch Reel

2.90 ± 0.20

(0.114 ± 0.008)

5.50 ± 0.20

(0.217 ± 0.008)

2.26 ± 0.20

(0.089 ± 0.008)

1.50 ± 0.10

(0.061 ± 0.004)

Carrier Length

Carrier Depth

Sprocket Hole

178

(7.008)

330

(12.992)

Reel Outside Diameter

Reel Inner Diameter

Feed Hole Diameter

Sprocket Hole Position

Punch Hole Position

Punch Hole Pitch

50.0

(1.969)

13.0 ± 0.20

(0.512 ± 0.008)

1.75 ± 0.10

(0.069 ± 0.004)

5.50 ± 0.05

(0.217 ± 0.002)

MIN.

4.00 ± 0.10

(0.157 ± 0.004)

4.00 ± 0.10

(0.157 ± 0.004)

2.00 ± 0.05

(0.079 ± 0.002)

0.30 ± 0.10

(0.012 ± 0.004)

Sprocket Hole Pitch

Embossment Center

Overall Tape Thickness

Tape Width

12.00 ± 0.30

(0.472 ± 0.012)

18.4

Reel Width

MAX.

(0.724)

Quantity per Reel

1,000

5,000

REV. 03/20

Speciﬁcationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.

Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspeciﬁcꢀapplications.ꢀ

Legal Disclaimer Notice

This legal disclaimer applies to purchasers and users of Bourns^®products manufactured by or on behalf of Bourns, Inc. and its

afﬁliates (collectively, “Bourns”).

Unless otherwise expressly indicated in writing, Bourns^®products and data sheets relating thereto are subject to change

without notice. Users should check for and obtain the latest relevant information and verify that such information is current and

complete before placing orders for Bourns^®products.

The characteristics and parameters of a Bourns^®product set forth in its data sheet are based on laboratory conditions, and

statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical

requirements in generic applications. The characteristics and parameters of a Bourns^®product in a user application may vary

from the data sheet characteristics and parameters due to (i) the combination of the Bourns^®product with other components

in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns^®

product also can and do vary in different applications and actual performance may vary over time. Users should always verify

the actual performance of the Bourns^®product in their speciﬁc devices and applications, and make their own independent

judgments regarding the amount of additional test margin to design into their device or application to compensate for

differences between laboratory and real world conditions.

Unless Bourns has explicitly designated an individual Bourns^®product as meeting the requirements of a particular industry

standard (e.g., ISO/TS 16949) or a particular qualiﬁcation (e.g., UL listed or recognized), Bourns is not responsible for any

failure of an individual Bourns^®product to meet the requirements of such industry standard or particular qualiﬁcation. Users of

Bourns^®products are responsible for ensuring compliance with safety-related requirements and standards applicable to their

devices or applications.

Bourns^®products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-

plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or

environmental damage. Unless expressly and speciﬁcally approved in writing by two authorized Bourns representatives on a

case-by-case basis, use of any Bourns^®products in such unauthorized applications might not be safe and thus is at the user’s

sole risk. Life-critical applications include devices identiﬁed by the U.S. Food and Drug Administration as Class III devices and

generally equivalent classiﬁcations outside of the United States.

Bourns expressly identiﬁes those Bourns^®standard products that are suitable for use in automotive applications on such

products’ data sheets in the section entitled “Applications.” Unless expressly and speciﬁcally approved in writing by two

authorized Bourns representatives on a case-by-case basis, use of any other Bourns^®standard products in an automotive

application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns

expressly identiﬁes a sub-category of automotive application in the data sheet for its standard products (such as infotainment

or lighting), such identiﬁcation means that Bourns has reviewed its standard product and has determined that if such Bourns^®

standard product is considered for potential use in automotive applications, it should only be used in such sub-category of

automotive applications. Any reference to Bourns^®standard product in the data sheet as compliant with the AEC-Q standard

or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.

Bourns^®standard products are not tested to comply with United States Federal Aviation Administration standards generally

or any other generally equivalent governmental organization standard applicable to products designed or manufactured for

use in aircraft or space applications. Bourns expressly identiﬁes Bourns^®standard products that are suitable for use in aircraft

or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and speciﬁcally

approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns^®standard

product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the

user’s sole risk.

The use and level of testing applicable to Bourns^®custom products shall be negotiated on a case-by-case basis by Bourns and

the user for which such Bourns^®custom products are specially designed. Absent a written agreement between Bourns and the

user regarding the use and level of such testing, the above provisions applicable to Bourns^®standard products shall also apply

to such Bourns^®custom products.

Users shall not sell, transfer, export or re-export any Bourns^®products or technology for use in activities which involve the

design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use

Bourns^®products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions

apply to all uses and applications that violate national or international prohibitions, including embargos or international

regulations. Further, Bourns^®products and Bourns technology and technical data may not under any circumstance be

exported or re-exported to countries subject to international sanctions or embargoes. Bourns^®products may not, without prior

authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible

to receive U.S. commodities, software, and technical data.

To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,

incidental or indirect damages or lost revenues or lost proﬁts, and (ii) any and all implied warranties, including implied warranties

of ﬁtness for particular purpose, non-infringement and merchantability.

For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simpliﬁed Chinese

bilingual versions are available at:

Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies

PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf

C1753 05/17/18R

SMAJ45CA-QH [BOURNS]

相关型号：

UL1042

ZXFV201

ZXFV201N14

ZXFV201N14TA

ZXFV201N14TC

ZXFV202E5

ZXFV202N8

ZXFV203N14

ZXFV301N16(1)

ZXFV302N16

ZXFV4089

ZXFV4089N8