VMN4-2M-400-5 [CADDOCK]
Type VMN Voltage Monitoring Resistor Networks Transient Tolerant;型号: | VMN4-2M-400-5 |
厂家: | Caddock Electronics, Inc. |
描述: | Type VMN Voltage Monitoring Resistor Networks Transient Tolerant 监控 |
文件: | 总1页 (文件大小:525K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Type VMN Voltage Monitoring Resistor Networks
Transient Tolerant
New
Voltage Dividers for Industrial Power Quality and Power Consumption Metering Applications
Ratio Tolerance of 0.1% or 0.02%, Ratio TC of 10 ppm/°C or 5 ppm/°C
The Type VMN Transient Tolerant Voltage Monitoring Networks are
designed for use in the voltage measurement circuits of Power Quality
Monitoring Equipment, Kilowatt-Hour Meters, and other Power and Energy
Measurement Equipment, where precision electrical service voltage
monitoring is required.
The VMN Networks are manufactured with Tetrinox®, Caddock’s Ultra-
StableLow-TCResistanceFilmSystem. TheTetrinoxfilmsystem, combined
with Caddock’s Ceramic Sandwich Resistor Network construction, provides
outstanding long-term stability in industrial applications with electrical
surges, transient conditions, and high humidity exposure.
For Custom Type VMN Voltage Monitoring Networks developed to meet
your program requirements, contact Applications Engineering at Caddock.
2
Ratio
Tol.
8
3
Ratio
T.C.
4
Ratio
V.C.
5
7
1
6
Resistance
R2
Normal
Maximum
Voltage
Divider
Ratio
Overload
Voltage
Rating
Impulse
(Surge)
Voltage
Operating Operating
Part Number
Total
Resistance
(R1 + R2)
Voltage
(AC rms)
Voltage
(AC rms)
R1
VMN4-2M-400
VMN4-2M-400-5
VMN4-5M-500
VMN4-5M-500-5
450 Volts
450 Volts
700 Volts
700 Volts
600 Volts
600 Volts
900 Volts
900 Volts
400 : 1
400 : 1
500 : 1
500 : 1
1.995 Meg
1.995 Meg
4.990 Meg
4.990 Meg
5 K
5 K
2 Meg
2 Meg
5 Meg
5 Meg
0.1%
0.02%
0.1%
10 ppm/°C
5 ppm/°C
10 ppm/°C
5 ppm/°C
0.03 ppm/V
0.03 ppm/V
0.02 ppm/V
0.02 ppm/V
1,000 Volts
1,000 Volts
1,500 Volts
1,500 Volts
10 kV
10 kV
10 kV
10 kV
10 K
10 K
0.02%
Specifications
1
2
3
4
Ratio: (R1+R2) : R2 (Voltage Divider Ratio)
.110 Max.
(2.79)
1.000 ±.020
(25.40 ±.51)
Ratio Tolerance: measured at 100 Volts at +23°C ambient
Ratio T.C.: measured at -40°C and +85°C, ref. to +25°C
Ratio V.C.: measured at 100 Volts DC and 600 Volts DC
Absolute Tolerance: ±1%
.510 ±.020
(12.95 ±.51)
Seated Height
CADDOCK
VMN4-5M-500-5
1602
.150 ±.040
(3.81 ±1.02)
Absolute T.C.: 30 ppm/°C, measured at -40°C and +85°C,
referenced to +25°C
D
.050 (1.27)
.100 (2.54)
.600 (15.24)
.700 (17.78)
.900 (22.86)
.020 ±.002
(0.51 ±.05)
Ratio Stability:
See Lead Form
Detail Note
7 Normal Operating Voltage applied to R1 and R2 connected
in series at +85°C. Change in Ratio after 2,000 hours is
±0.02% maximum.
Lead Form Detail Note:
The lead form detail provides
interference in the circuit board
hole to achieve a vertical mount
of the device. Recommended
circuit board hole is nominally
0.039 inch (1.00 mm).
8
Maximum Operating Voltage applied to R1 and R2
connected in series at +85°C. Change in Ratio after 2,000
hrs is ±0.04% maximum.
R1
R2
5
Overload Voltage and Stability: Overload Voltage applied
for 10 seconds to R1 and R2 connected in series at +25°C.
Change in Ratio is 0.01% maximum.
6 Impulse Voltage and Stability:
1.2/50 microsecond
Isolation Dimension D:
Minimum distance between
metal portions of Pins 2 and 3
is 0.414 inch (10.51 mm)
1 2
3 4
5
waveform. The impulse voltage wave shape shall have a
rise time of 1.2 microseconds to 90% of the impulse voltage
peak, followed by a fall time of 50 microseconds to 50% of
the impulse voltage peak. Impulse applied to Pin 1 (with R1
and R2 connected in series), with Pin 5 held near ground.
After 20 pulses applied, the Change in Ratio is 0.01%
maximum.
Operating Temperature Range: -40°C to +85°C
Sales and Applications Engineering
17271 North Umpqua Hwy.
Roseburg, Oregon 97470-9422
Phone: (541) 496-0700
ELECTRONICS, INC.
For Caddock Distributors listed by country see caddock.com/contact/dist.html
e-mail: caddock@caddock.com • web: www.caddock.com
Fax: (541) 496-0408
© 2003-2017 Caddock Electronics, Inc.
28_IL141.0717
相关型号:
VMO1200-01F
Power Field-Effect Transistor, 1220A I(D), 100V, 0.00125ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MODULE-4
IXYS
VMO1200-01F
Power Field-Effect Transistor, 1220A I(D), 100V, 0.00125ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MODULE-4
LITTELFUSE
VMO150-01P1
Power Field-Effect Transistor, 165A I(D), 100V, 0.008ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, ECOPAC-11
LITTELFUSE
VMO150-01P1
Power Field-Effect Transistor, 165A I(D), 100V, 0.008ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, ECOPAC-11
IXYS
VMO40-05P1
Power Field-Effect Transistor, 41A I(D), 500V, 0.1ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, ECOPAC-4
IXYS
©2020 ICPDF网 联系我们和版权申明