CLC3800 [CADEKA]
Triple, Standard Definition Video Amplifiers; 三人间，标准清晰度视频放大器
| 型号： | CLC3800 |
| 厂家： | 
CADEKA MICROCIRCUITS LLC. |
| 描述： | Triple, Standard Definition Video Amplifiers |
| 文件： | 总11页 (文件大小：844K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Data Sheet
Amplify the Human Experience
Co m l i n e a r ® CLC3800, CLC3801, CLC3802
Triple, Standard Definition Video Amplifiers
f e a t u r e s
General Description
nꢀ
Integrated 4th-order, 8MHz filters
The CLC3800 (6dB), CLC3801 (9dB), and CLC3802 (12dB) are triple low cost
video amplifiers capable of driving 2Vpp into 1 (150Ω) or 2 (75Ω) video loads.
The CLC3800, CLC3801, and CLC3802 feature integrated 8MHz, 4th-order
low pass filters designed to cleanly pass standard definition video signals
while filtering out noise and other unwanted signals , resulting in a crisper,
cleaner video signal. The 4th-order filters provide improved image quality
when compared to 2nd-order passive filtering solutions.
nꢀ
nꢀ
nꢀ
Integrated 6, 9, or 12dB video drivers
8.8mA total supply current
0.05%/0.02˚ differential gain/phase
error
nꢀ
nꢀ
nꢀ
DC coupled inputs
AC or DC coupled outputs
DC-coupled outputs remove the need
for AC-coupling capacitors
Each channel can drive 2Vpp into 1 or 2
video loads (150Ω or 75Ω)
0.1% THD
The CLC3800 video amplifier offers a fixed gain of 6dB. This integrated
gain compensates for the voltage drop inherent in properly terminated video
nꢀ
loads; ensuring a 1V video signal is present at the load. If additional gain
pp
nꢀ
nꢀ
nꢀ
is required, the CLC3801 video amplifier offers a fixed gain of 9dB and the
CLC3802 offers 12dB.
Operates from 3V to 7V supplies
Pb-free SOIC-8 or DFN-8 packages
All three video amplifiers can be driven by DC-coupled signals. Thier outputs
can drive either AC- or DC-coupled loads.
a p p l i c a t i o n s
nꢀ
Cable or satellite set-top-box (STB)
nꢀ
Portable DVD players
These video amplifiers operate from 3V to 7V supplies and consume 8.8mA of
supply current, making them well suited for battery powered devices.
nꢀ
DVD players
nꢀ
Portable media players with video out
nꢀ
Video on demand
Functional Block Diagram
nꢀ
Personal video recorders
Gain
Gain
Gain
IN1
IN2
IN3
OUT1
OUT2
OUT3
8MHz, 4th Order
Low Pass Filter
CLC3800 - 6dB
CLC3801 - 9dB
CLC3802 - 12dB
Ordering Information
Part Number
Gain
6dB
9dB
Package
SOIC-8
SOIC-8
Pb-Free
Yes
RoHS Compliant
Operating Temperature Range Packaging Method
CLC3800ISO8X
CLC3801ISO8X
CLC3802ISO8X
Yes
Yes
Yes
Yes
Yes
Yes
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
Reel
Reel
Reel
Reel
Reel
Reel
Yes
✝
12dB SOIC-8
Yes
CLC3800ILP8X*
CLC3801ILP8X*
CLC3802ILP8X*
6dB
9dB
DFN-8
DFN-8
Yes
Yes
12dB DFN-8
Yes
✝Preliminary, contact CADEKA for availablility. *Future product offering.
Moisture sensitivity level for all parts is MSL-1.
©2008 CADEKA Microcircuits LLC
www.cadeka.com
Data Sheet
SOIC Pin Configuration
SOIC Pin Assignments
Pin No.
Pin Name
IN1
Description
1
2
3
4
5
6
7
8
Input, channel 1
Input, channel 2
Input, channel 3
Positive supply
Ground
1
8
OUT1
OUT2
IN1
IN2
7
2
IN3
IN2
+V
S
3
6
5
OUT3
IN3
GND
OUT3
OUT2
OUT1
4
+V
GND
Output, channel3
Output, channel 2
Output, channel 1
S
DFN Pin Configuration
DFN Pin Configuration
Pin No.
Pin Name
IN1
Description
1
2
3
4
5
6
7
8
Input, channel 1
Input, channel 2
Input, channel 3
Positive supply
Ground
8
1
2
3
4
IN1
IN2
IN3
OUT1
OUT2
IN2
IN3
7
+V
S
GND
OUT3
OUT2
OUT1
6
5
OUT3
Output, channel3
Output, channel 2
Output, channel 1
+V
GND
S
Bottom View
©2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
2
Data Sheet
Absolute Maximum Ratings
The safety of the device is not guaranteed when it is operated above the “Absolute Maximum Ratings”. The device should
not be operated at these “absolute” limits. Adhere to the “Recommended Operating Conditions” for proper device func-
tion. The information contained in the Electrical Characteristics tables and Typical Performance plots reflect the operating
conditions noted on the tables and plots.
Parameter
Min
0
Max
14
Unit
Supply Voltage
V
V
Input Voltage Range
Output Short Circuit Current
-V -0.5V
s
+V +0.5V
s
+110, -85
mA
Reliability Information
Parameter
Min
-65
Typ
Max
Unit
Junction Temperature
Storage Temperature Range
Lead Temperature (Soldering, 10s)
Package Thermal Resistance
8-Lead SOIC
150
150
260
°C
°C
°C
100
60
°C/W
°C/W
8-Lead DFN
Notes:
Package thermal resistance (q ), JDEC standard, multi-layer test boards, still air.
JA
ESD Protection
Product
SOIC-8
DFN-8
TBD
Human Body Model (HBM), output ESD protection
Charged Device Model (CDM)
5kV
2kV
TBD
Recommended Operating Conditions
Parameter
Min
Typ
Max
Unit
Operating Temperature Range
-40
3
+125
°C
Supply Voltage Range
7
V
©2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
3
Data Sheet
Electrical Characteristics
T = 25°C, V = +3V, input is DC-coupled, input source resistance = 37.5Ω, R = 150Ω thru a 220μF AC-coupling capaci-
A
s
L
tor, V = 1V ; unless otherwise noted.
IN
pp
symbꢀꢁ
pꢂꢃꢂmꢄꢅꢄꢃ
cꢀꢆdꢇꢅꢇꢀꢆꢈ
Mꢇꢆ
tyꢉ
Mꢂx
uꢆꢇꢅꢈ
Frequency Domain Response
RL=150Ω, AC-coupled
7.6
7.6
MHz
MHz
MHz
MHz
dB
dB
%
F-1dB
F-3dB
FSB
-1dB Bandwidth
RL=75Ω, DC-coupled
RL=150Ω, AC-coupled
8.5
-3dB Bandwidth
RL=75Ω, DC-coupled
8.5
at 27MHz, RL=150Ω, AC-coupled
at 27MHz, RL=75Ω, DC-coupled
NTSC (3.58MHz), AC-coupled
NTSC (3.58MHz), DC-coupled
48
Stopband Attenuation
48
0.13
0.05
0.34
0.05
0.02
0.2
%
DG
DP
Differential Gain
Differential Phase
%
NTSC (3.58MHz), DC-coupled, RL=75Ω
NTSC (3.58MHz), AC-coupled
°
°
NTSC (3.58MHz), DC-coupled
°
NTSC (3.58MHz), DC-coupled, RL=75Ω
Time Domain Response
GD
PD
Group Delay
Propogation Delay
Delta delay between 400kHz and 3.58MHz
5.6
65
ns
ns
Delay from input to output, 4.5MHz
Distortion/Noise Response
VOUT = 2Vpp, 1MHz, active video range + sync
VOUT = 1.4Vpp, 3.58MHz, active video range
0.1
0.9
0.1
%
%
%
VOUT = 2Vpp, 1MHz, active video range +
sync, RL=75Ω, DC-coupled
THD
Total Harmonic Distortion
0.9
%
VOUT= 1.4Vpp, 3.58MHz, active video range,
RL=75Ω, DC-coupled
SNR
Signal to Noise Ratio
68
±1
±1
60
58
dB
%
NTC-7 Weighting 10kHz to 4.2MHz
400kHz to 3.58MHz (NTSC)
CLG
Chroma / Luma Gain
400kHz to 4.43MHz (PAL)
%
Channel-to-channel at 1MHz
dB
dB
XTALK
Crosstalk
Channel-to-channel at 1MHz, RL=75Ω, DC-coupled
DC Performance
5.7
8.6
6.0
9.0
6.3
9.4
TBD
0.2
390
5
dB
dB
dB
dB
mV
µA
V
DC, CLC3800, RL=75Ω, DC-coupled
DC, CLC3801, RL=75Ω, DC-coupled
DC, CLC3802, RL=75Ω, DC-coupled
400kHz, RL=75Ω, DC-coupled
VIN=0V, no load
G
Gain(1)
TBD
12
GMATCH
VOS
Inter-Channel Gain Matching(1)
Output Offset Voltage(1)
Input Bias Current(1)
0.08
330
1.4
230
Ib
VIN=0V, no load
0 to 1.25
0 to 0.9
2.5
CLC3800
VIN
Input Voltage Range(1)
V
CLC3801
VIN=1.1Vpp, RL=150Ω, AC-coupled
VIN=1.1Vpp, RL=75Ω, DC-coupled(1)
VIN=1.1Vpp, RL=150Ω, AC-coupled
VIN=1.1Vpp, RL=75Ω, DC-coupled(1)
VIN=1.1Vpp, RL=150Ω, AC-coupled
VIN=1.1Vpp, RL=75Ω, DC-coupled(1)
DC , no load, VS = 3V to 5.5V
No load, all 3 channels
V
Output Voltage, CLC3800(2)
Output Voltage, CLC3801(2)
Output Voltage, CLC3802(2)
2.35
2.32
TBD
2.5
2.66
2.69
TBD
15
V
2.5
V
VO
2.5
V
TBD
TBD
52
V
V
PSRR
IS
Power Supply Rejection Ratio
Supply Current(1)
dB
mA
8.8
nꢀꢅꢄꢈ:
1. 100% tested at 25°C
2. Designed to handle SD video from -40°C to +125°
©2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
4
Data Sheet
Electrical Characteristics
T = 25°C, V = +5V, input is DC-coupled, input source resistance = 37.5Ω, R = 150Ω thru a 220μF AC-coupling capaci-
A
s
L
tor, V = 1V ; unless otherwise noted.
IN
pp
symbꢀꢁ
pꢂꢃꢂmꢄꢅꢄꢃ
cꢀꢆdꢇꢅꢇꢀꢆꢈ
Mꢇꢆ
tyꢉ
Mꢂx
uꢆꢇꢅꢈ
Frequency Domain Response
RL=150Ω, AC-coupled
7.7
7.7
MHz
MHz
MHz
MHz
dB
dB
%
F-1dB
F-3dB
FSB
-1dB Bandwidth
RL=75Ω, DC-coupled
RL=150Ω, AC-coupled
8.6
-3dB Bandwidth
RL=75Ω, DC-coupled
8.6
at 27MHz, RL=150Ω, AC-coupled
at 27MHz, RL=75Ω, DC-coupled
NTSC (3.58MHz), AC-coupled
NTSC (3.58MHz), DC-coupled
48
Stopband Attenuation
48
0.17
0.1
%
DG
DP
Differential Gain
Differential Phase
0.34
0.02
0.02
0.2
%
NTSC (3.58MHz), DC-coupled, RL=75Ω
NTSC (3.58MHz), AC-coupled
°
°
NTSC (3.58MHz), DC-coupled
°
NTSC (3.58MHz), DC-coupled, RL=75Ω
Time Domain Response
GD
PD
Group Delay
Propogation Delay
Delta delay between 400kHz and 3.58MHz
5.6
65
ns
ns
Delay from input to output, 4.5MHz
Distortion/Noise Response
VOUT= 2Vpp, 1MHz, active video range + sync
VOUT= 1.4Vpp, 3.58MHz, active video range
0.1
0.5
%
%
%
VOUT= 2Vpp, 1MHz, active video range + sync,
RL=75Ω, DC-coupled
0.15
THD
Total Harmonic Distortion
0.6
%
VOUT= 1.4Vpp, 3.58MHz, active video range,
RL=75Ω, DC-coupled
SNR
Signal to Noise Ratio
73
±1
±1
-61
-58
dB
%
NTC-7 Weighting 10kHz to 4.2MHz
400kHz to 3.58MHz (NTSC)
CLG
Chroma / Luma Gain
400kHz to 4.43MHz (PAL)
%
Channel-to-channel at 1MHz
dB
dB
XTALK
Crosstalk
Channel-to-channel at 1MHz, RL=75Ω, DC-coupled
DC Performance
5.7
8.6
6.0
9.0
6.3
9.4
TBD
0.2
390
5
dB
dB
dB
dB
mV
µA
V
DC, CLC3800, RL=75Ω, DC-coupled
DC, CLC3801, RL=75Ω, DC-coupled
DC, CLC3802, RL=75Ω, DC-coupled
400kHz, RL=75Ω, DC-coupled
VIN=0V, no load
G
Gain(1)
TBD
12
GMATCH
VOS
Inter-Channel Gain Matching(1)
Output Offset Voltage(1)
Input Bias Current(1)
0.08
330
1.4
230
Ib
VIN=0V, no load
0 to 1.1
0 to 1.4
0 to 1
2.5
CLC3800
VRIN
Video Range - Input(1)
0 to 0.78
V
CLC3801
VIN=1.1Vpp, RL=150Ω, AC-coupled
VIN=1.1Vpp, RL=75Ω, DC-coupled(1)
VIN=1.1Vpp, RL=150Ω, AC-coupled
VIN=1.1Vpp, RL=75Ω, DC-coupled(1)
VIN=1.1Vpp, RL=150Ω, AC-coupled
VIN=1.1Vpp, RL=75Ω, DC-coupled(1)
DC, no load
V
Output Voltage, CLC3800(2)
Output Voltage, CLC3801(2)
Output Voltage, CLC3802(2)
2.35
2.32
TBD
2.5
2.66
2.69
TBD
15
V
2.5
V
VO
2.5
V
TBD
TBD
53
V
V
PSRR
IS
Power Supply Rejection Ratio
Supply Current(1)
dB
mA
Total
9.5
nꢀꢅꢄꢈ:
1. 100% tested at 25°C
2. Designed to handle SD video from -40° to +125°
©2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
5
Data Sheet
raising the input signal by approximately 330mV. For ex-
ample, when 0V is applied to the input, the output becomes
approximately 330mV above ground. This offset eliminates
sync tip clipping. Figure 2 illustrates a typical DC-coupled
input signal and resulting output signal after exiting the
CLC3800.
Application Information
Basic Operation
The CLC3800, CLC3801, and CLC3802 are 3-channel video
amplifiers that operate with single supply voltages from 3V
to 7V. They are designed to accept DC-coupled inputs and
will drive AC- or DC-coupled outputs. Each channel inte-
grates a DC offset, 4th order Butterworth filters, and fixed
gain video drivers. The filtering is appropriate for standard
definition video signals and has a -3dB cutoff of 8.6MHz.
This cutoff provides an excellent compromise between flat
in-band response and high frequency noise reduction. The
input signals are level shifted prior to the input filters and
output amplifiers.
2.39V
Output Signal
1.02V
0.97V
Input Signal
Inputs: DC-Coupled
0.35V
0.32V
The inputs must be DC-coupled. Many DACs provide a
current output that is resistively terminated to ground.
These DACs are conveniently DC-coupled to the inputs of
the CLC3800, CLC3801, or CLC3802 as shown in Figure 1.
DC-coupled inputs use fewer components and lowers the
overall system cost.
0.02V
0.00V
Figure 2. Typical DC-coupled Signal for CLC3800
The input voltage range is typically 0V to 1.4V for the
CLC3800 at 5V supply. Due to the internal fixed gain of 6dB
(for the CLC3800) and the internal level shift of nominally
DAC Load Resistors
per Video DAC/Encoder specs
1
2
3
4
8
330mV, the V range is generally limited by the output.
R or Y
G or PB
B or PR
IN1
IN2
IN3
+Vs
OUT1
OUT2
OUT3
GND
IN
V
IN
and V
are fully detailed in the Electrical Character-
OUT
Video
DAC/
Encoder
7
6
5
istics section.
CLC3800
Outputs: AC- or DC-Coupled
+3V or +5V
1.0µF
Each channel of the CLC3800, CLC3801, and CLC3802 can
drive either AC- or DC-coupled loads. Each channel can
drive single or dual video loads, 150Ω (1 video load) or
75Ω (2 video loads). Figure 3 shows the typical configura-
tion for driving either AC- or DC-coupled loads.
0.1µF
Figure 1. Typical Input Configuration
With DC-coupled loads, AC-coupling capacitors are not
used. Match the series termination resistors to the typi-
cal cable impedance, 75Ω for standard video cable. Keep
the output connection to the series termination resistors
as short as possible. If driving 2 video loads, place both
resistors close to the CLC3800.
The input termination/source resistance is set by the ap-
plication. Any value up to several kΩ can be used. Lower
values reduce noise, but if higher values are needed, there
is little effect on filter shape or distortion performance of
the CLC380x. If the CLC380x is located on the same board
as the video source, and within a few inches, the input
termination resistance is determined by the requirements
of the Video DAC or Encoder. If a cable is needed to con-
nect the CLC380x to the video source, the termination must
match the cable impedance which is 75Ω for standard vid-
eo cable.
With AC-coupled loads, use an AC-coupling capacitor of
at least 220μF in a 75Ω environment. A value of at least
220μF will ensure that low frequencies are passed, pre-
venting video droop across the line, referred to as “tilt”.
The CLC380x Family of video amplifiers add a DC offset,
©2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
6
Data Sheet
220µF
220µF
220µF
75Ω Video Cables
75Ω
75Ω
75Ω
1
8
7
6
5
IN1
OUT1
OUT2
OUT3
GND
2.5
2
75Ω
75Ω
75Ω
2
IN2
CLC3800
3
4
IN3
1.5
1
+Vs
SOIC-8
AC-Coupling Caps
are Optional
0.5
0
Figure 3. Typical Output Configuration
Power Supply Decoupling
-40
-20
0
20
40
60
80
Ambient Temperature (°C)
For optimum performance, power supply decoupling is re-
quired. Figure 4 shows the recommended usage of power
supply decoupling capacitors. The 0.1µF decoupling ca-
pacitor must be placed as close to pin 4 as possible, <
0.1” or < 2.5mm, to be effective. The larger, 1µF capaci-
tor can be placed further away.
Figure 5. Maximum Power Derating
1
2
3
4
8
7
6
5
IN1
IN2
IN3
+Vs
OUT1
OUT2
OUT3
GND
CLC3800
+3V or +5V
1.0µF
Power Dissipation Considerations with DC-Coupled Loads
0.1µF
When driving DC loads, the supply current is much higher
than in AC applications and care must be taken to dis-
sipate the extra heat generated. The output signal will
swing from about 0.3V to 2.3V for full swing video. In
the worst case condition, an all white screen with dual DC
loads, the additional thermal rise over the quiescent con-
dition is about 20°C. An easy way to help distribute this
extra heat is to place a ground plane under the part and
add ground plane on the bottom of the board immediately
under the part with vias between the two planes.
Figure 4. Recommended Power Supply Decoupling
Power Dissipation
TBD
The CLC3800 is designed primarily for low voltage opera-
tion with supply values between 3.0V and 5.5V, but larger
supplies can be used. In this situation, DC loads may not
be possible due to thermal considerations. With single DC
loads on all three channels and a 12V supply, the thermal
rise is an additional 45° this gives a total temperature rise
of about 57°.
©2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
7
Data Sheet
Layout Considerations
General layout and supply bypassing play major roles in
high frequency performance. CaDeKa has evaluation
boards to use as a guide for high frequency layout and as
aid in device testing and characterization. Follow the steps
below as a basis for high frequency layout:
• Include 1µF and 0.1µF ceramic capacitors for power sup-
ply decoupling
• Place the 6.8µF capacitor <0.75 inches of the power pin
• Place the 0.1µF capacitor <0.1 inches of the power pin
• Remove the ground plane near the input and output pins
to reduce parasitic capacitance
• Minimize all trace lengths to reduce series inductances
Figure 10. CEB021 Top View
Refer to the evaluation board layouts for more informa-
tion.
Evaluation Board Information
The following evaluation boards are available to aid in the
testing and layout of these devices:
Evaluation Board
CEB021
Products
CLC3800, CLC3801, CLC3802 in
SOIC packages
Evaluation Board Schematics
Evaluation board schematics and layouts are shown in Fig-
ures 9-11. Application Note AN-6 provides a detailed de-
scription of the evaluation board.
Figure 11. CEB006 Bottom View
SHORT FOR CLC3800/CLC3801/CLC3802
Figure 9. CEB021 Schematic
©2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
8
Data Sheet
Typical Application Circuits
DAC Load Resistors
per Video DAC/Encoder specs
DVD Player or STB
220µF
220µF
220µF
75Ω Video Cables
R
G
B
75Ω
75Ω
75Ω
1
2
3
4
8
R or Y
IN1
IN2
IN3
+Vs
OUT1
OUT2
OUT3
GND
75Ω
75Ω
75Ω
Video
7
6
5
G or PB
DAC/
Encoder
CLC3800
B or PR
+3V or +5V
1.0µF
0.1µF
AC-Coupling Caps
are Optional
Figure 11. Typical Configuration for Component Video (RGB, YP P , or YUV)
B R
DAC Load Resistors
per Video DAC/Encoder specs
DVD Player or STB
220µF
220µF
220µF
75Ω Video Cables
Y
C
75Ω
75Ω
75Ω
1
2
3
4
8
7
6
5
Y
IN1
IN2
IN3
+Vs
OUT1
OUT2
OUT3
GND
75Ω
Video
DAC/
C
Encoder
75Ω
75Ω
CLC3800
CV1
CV2
CV
+3V or +5V
1.0µF
220µF
75Ω
0.1µF
75Ω
AC-Coupling Caps
are Optional
Figure 11. Typical Configuration for Composite Video an extra composite output is available to drive an RF modulator
©2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
9
Data Sheet
DAC Load Resistors
per Video DAC/Encoder specs
DVD Player or STB
220µF
220µF
220µF
75Ω
75Ω
75Ω
1
2
3
4
8
Y
C
IN1
IN2
IN3
+Vs
OUT1
OUT2
OUT3
GND
S-Video
75Ω
Video
DAC/
Encoder
7
6
5
75Ω
CLC3800
75Ω Video Cables
75Ω Video Cables
CVBS1
CVBS
75Ω
75Ω
+3V or +5V
1.0µF
220µF
75Ω
CVBS2
0.1µF
AC-Coupling Caps
are Optional
Figure 11. Typical Configuration for Composite (CVBS) and S-Video
DAC Load Resistors
per Video DAC/Encoder specs
DVD Player or STB
220µF
220µF
220µF
75Ω Video Cables
R
G
B
75Ω
75Ω
75Ω
1
2
3
4
8
7
6
5
R or Y
G or PB
B or PR
IN1
IN2
IN3
+Vs
OUT1
OUT2
OUT3
GND
75Ω
75Ω
75Ω
CLC3800
+3V or +5V
1.0µF
Video
DAC/
Encoder
0.1µF
220µF
220µF
220µF
75Ω Video Cables
Y
75Ω
75Ω
75Ω
1
2
3
4
8
7
6
5
Y
C
IN1
IN2
IN3
+Vs
OUT1
OUT2
OUT3
GND
OUT
OUT
OUT
75Ω
75Ω
75Ω
C
CLC3800
CV
CV
+3V or +5V
1.0µF
0.1µF
AC-Coupling Caps
are Optional
Figure 11. Typical Configuration for 6-channel application
©2007-2008 CADEKA Microcircuits LLC
www.cadeka.com
10
Data Sheet
Mechanical Dimensions
SOIC-8 Package
For additional information regarding our products, please visit CADEKA at: cadeka.com
caDeKa Hꢄꢂdqꢊꢂꢃꢅꢄꢃꢈ Loveland, Colorado
T: 970.663.5452
T: 877.663.5452 (toll free)
CADEKA, the CADEKA logo design, COMLINEAR, the COMLINEAR logo design, and ARCTIC are trademarks or registered trademarks
of CADEKA Microcircuits LLC. All other brand and product names may be trademarks of their respective companies.
CADEKA reserves the right to make changes to any products and services herein at any time without notice. CADEKA does not assume any
responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in
writing by CADEKA; nor does the purchase, lease, or use of a product or service from CADEKA convey a license under any patent rights,
copyrights, trademark rights, or any other of the intellectual property rights of CADEKA or of third parties.
Amplify the Human Experience
Copyright ©2007-2008 by CADEKA Microcircuits LLC. All rights reserved.
相关型号：
©2020 ICPDF网 联系我们和版权申明