PACDN046Y6 [CALMIRCO]
TRANSIENT VOLTAGE SUPPRESSOR ARRAYS; 瞬态电压抑制器阵列
| 型号： | PACDN046Y6 |
| 厂家： | 
CALIFORNIA MICRO DEVICES CORP |
| 描述： | TRANSIENT VOLTAGE SUPPRESSOR ARRAYS |
| 文件： | 总2页 (文件大小：87K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PACDN042/043/
044/045/046
CALIFORNIA MICRO DEVICES
TRANSIENT VOLTAGE SUPPRESSOR ARRAYS
Features
2, 3, 4, 5, or 6 transient voltage suppressors in a single
surface-mount package.
Applications
ESD protection of PC ports, e.g. USB port.
Protection of interface ports or IC pins
which are exposed to high levels of ESD.
Compact SMT packages save board space and ease
layout in space critical applications compared to
discrete solutions.
In-system ESD protection to 20kV contact discharge
per IEC 61000-4-2 International Standard.
Product Description
The PACDN042, PACDN043, PACDN044, PACDN045, and PACDN046 are transient voltage suppressor arrays that provide a very
high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The devices
are designed and characterized to safely dissipate ESD strikes at levels well beyond the maximum requirements set forth in the
IEC 61000-4-2 International Standard (Level 4, 8kV contact discharge). All pins are rated at 20kV ESD using the IEC 61000-4-
2 contact discharge method.
Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, all pins are protected for contact
discharges to greater than 30kV.
Schematic Configurations
STANDARD SPECIFICATIONS
Parameter
Reverse Stand-off Voltage, I = 10uA
Signal Clamp Voltage:
Min.
Typ.
Max.
Unit
5.5
V
Positive Clamp, 10mA
Negative Clamp, 10mA
5.6
-1.2
6.8
-0.8
8.0
-0.4
V
V
In-system ESD withstand voltage*:
Human Body Model (MIL-STD-883D, method 3015)
IEC 61000-4-2, contact discharge method
±30
±20
kV
kV
V
Clamping voltage during ESD discharge
MIL-STD-883D (Method 3015), 8kV
Capacitance @ 2.5V dc, 1 MHz
Temperature Range:
Positive
Negative
12
-8
30
V
pF
Operating
-40
-65
85
150
0.225
0.5
°C
Storage
Package Power Rating: SOT23, SOT23-5, SOT-143
TSSOP, MSOP
W
W
* ESD applied between channel pin and ground, one at a time. All other channels are open. All GND pins grounded.
This parameter is guaranteed by design and characterization..
Note: GND in this document refers to the lower supply voltage.
C1470800
© 2000 California Micro Devices Corp. All rights reserved.
8/25/2000 215 Topaz Street, Milpitas, California 95035
Tel: (408) 263-3214
Fax: (408) 263-7846
www.calmicro.com
1
PACDN042/043/
044/045/046
CALIFORNIA MICRO DEVICES
Typical Diode Capacitance vs. Reverse Voltage
60
50
40
30
20
10
0
0
1
2
3
4
5
Diode Reverse Voltage (V)
STANDARD PART ORDERING INFORMATION
Ordering Part Number
Style
Package
Pins
3
4
5
6
8
8
SOT23
SOT143
SOT23-5
SOT23-6
TSSOP
PACDN042Y3
PACDN043Y4
PACDN044Y5
PACDN045Y6
PACDN044T
PACDN046M
MSOP
When placing an order please specify desired shipping: Tubes or Tape & Reel.
©2000 California Micro Devices Corp. All rights reserved.
215 Topaz Street, Milpitas, California 95035
Tel: (408) 263-3214
Fax: (408) 263-7846
www.calmicro.com 8/25/2000
2
相关型号：
PACDN1404C/R
Trans Voltage Suppressor Diode, 5.5V V(RWM), Unidirectional, 4 Element, Silicon, CSP-6
CALMIRCO
PACDN1408C/R
Trans Voltage Suppressor Diode, 5.5V V(RWM), Unidirectional, 8 Element, Silicon, CSP-10
CALMIRCO
©2020 ICPDF网 联系我们和版权申明