CPCI200D-1 [CANDD]
180/225 wATT, 3U x 4HP CompactPCI; 二百二十五分之一百八十零瓦， 3U X 4HP的CompactPCI
| 型号： | CPCI200D-1 |
| 厂家： | 
C&D TECHNOLOGIES |
| 描述： | 180/225 wATT, 3U x 4HP CompactPCI |
| 文件： | 总4页 (文件大小：233K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Corporate: www.cdtechno.com
Product: www.cdpoweronline.com
cPCI200DC
180/225 Watt, 3U x 4HP CompactPCI
z 3U X 4HP
z Outputs Individually Protected
Against Overloads; Automatic
Recovery
z 36-72 VDC Input Range
z 180/225 Watt Continuous Output
Power
z PCI VoltageArchitecture
(5V,3.3V,+12V,-12V)
z Complies with PICMG 2.11 R1.0 with
47 Pin I/O Connector
z IPMI Capability (Available on Part
Numbers cPCI200D-3 and 4)
z Hot-Swap Capable
The cPCI200DC is a family of high-
reliability, 200 watt power supplies for
3U Compact PCI™ systems. Developed
to support hot-swap, redundant
operation, the cPCI200DC Series is
designed for compliance with PICMG™
2.11 R1.0 Power Interface Specification
with 47-pin I/O connector. Available with
IPMI functionality (part numbers
cPCI200D-3 and cPCI200D-4) , this unit
was developed with high-availability
(HA) telecommunications applications in
mind. Current sharing and internal ORing
diodes are included to support these and
other applications requiring reliable, hot-
swap performance and N+1 redundant
configuration. The 4HP package and
complement of agency approvals provide
for an advanced, high-density, high-
efficiency power solution for your
CompactPCI™ system requirements.
SPECIFICATIONS,ALLMODELS
PARAMETER
SYMBOL
CONDITIONS
MIN
36
34
TYP
MAX
72
75
UNITS
VDC
VDC
APK
Input Operating Voltage
Input Voltage Withstand
Inrush Current
Vin
Ii
36VDC input
72VDC input
48VDC input, full load
< 20
< 40
70
APK
Efficiency
η
%
IOUT
VOUT
RATED OUTPUT CURRENTOUTPUT
OUTPUT NUMBER
RATED OUTPUT VOLTAGE
Min
A*
B**
REGULATION
V1
V2
V3
V4
+5.0VDC
+3.3VDC
+12.0VDC
-12.0VDC
0A
0A
0A
0A
18.0 A1
27.0 A
4.0 A1
4.0 A1
27.0 A
27.0 A1
4.0 A1
4.0 A1
+4 / -2%
+4 / -2%
+/-10%
+/-10%
PARAMETER
Temperature Coefficient
PARD
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
%/°C
TC
0.02
20MHz bandwidth
all outputs
50 mVP-P
or 1.5% P-P
whichever is greater
180/225
Output Power
Minimum Load
50°C max temp., 300lfm airflow
V1 (config A, 180W)
W
mA
mA
500
500
V2 (config B, 225W)
NOTES:
Outputs share common return.
Total output power not to exceed 180W.
** Total output power not to exceed 225W.
Maximum combined power not to exceed 90 Watts.
*
1
cPCI200-DC REV A 7/2003
SPECIFICATIONS,ALLMODELS
Transient Response
an IPMI interface to the SM bus. Status functions include output
voltage and current levels as well as the DEG warning. Output
inhibit control can be toggled under software command. For a
complete specification of the firmware solution refer to
Application Note ACAN-02 on our website.
For a step load change of 50%-100%-50%, the peak output
excursion will not exceed 10% of nominal voltage, and will
recover to within 1% of nominal voltage within 500 microseconds.
Current Share
Active current sharing on Outputs V1and V2. Accuracy better than
10% of maximum rated load. Primary referenced.
Power Fail Warning (FAL#)
Open collector signal indicates output failure. Active low.
Remote Sense
Enable (EN#)
Outputs V1and V2 are capable of compensating >50mV of line
drop. Unit automatically reverts to local sensing in the event that
the sense leads are opened for any reason. Unit is protected against
reversed or shorted sense leads.
Short pin on connector will enable power supply output when
the mating pin is grounded. Supply will not power up until this
pin is engaged to its mate in the backplane. Unit output will be
inhibited as pin is disengaged from the mating connector.
Output Power
Temperature Warning (DEG#)
180W (Output configuration A) / 225W (Output configuration
B) continuous maximum, with 300lfm airflow at a maximum
ambient of 50°C. Derate to 90W/110W at 70°C.
Open collector indicates internal temperatures are approaching
the thermal shutdown limit (+/-10°C, typ). Active low.
Fault Indicator LED
Overload Protection
A red LED will be ON if output voltages are not within
specification.
Outputs are individually protected against overloads and
indefinite short circuit with automatic recovery upon removal of
the fault condition.
Power Present LED
A green LED will be ON when input voltage is present and above
the minimum requirement.
Over Voltage Protection
Outputs V1 and V2 have Over Voltage Protection at 125% typical
(135% max.) of nominal.
Cooling
300lfm of airflow required to maintain full output power at 0-
50°C ambient.
Over Temperature Protection
Outputs are protected against over temperature. Outputs will
automatically restore upon recovery to acceptable temperatures.
Temperature
Full output power achievable over the range of 0-50°C. Storage
temperature limits are –20 to +85°C.
Output Fault Isolation
Output isolation diodes are present in all outputs to isolate faults
within a failed power supply.
Altitude
Operating: -200 to +10,000 feet with ambient temperature
derating above 5,000 feet in accordance with the adiabatic lapse
rate (approximately 2C per 1000 feet).
Remote Inhibit (INH#)
Secondary referenced, active low, TTL compatible signal inhibits
all outputs upon activation.
Inhibit Indicator LED (Yellow)
IPMI Option
A yellow LED will be ON when the outputs are inhibited.
Available on Models cPCI200D-3 and cPCI200D-4
An I2C board is available as a factory-installed option to provide
IPMI/IPMB POWER SUPPLY SATELLITE CONTROLLER FEATURES
AVAILABLE ON PART NUMBERS cPCI200D-3 AND cPCI200D-4
z
z
Complies with IPMI V1.5 Rev 1.1 and IPMB V1.0
z
z
Thermal sensor can be enabled to generate event messages
Complies to PICMG 2.9 (CompactPCI Systems Manage-
ment Specification)
8 analog inputs configured for monitoring voltages and currents
on power supply outputs V1 - V4
Responds to all mandatory IPMI commands and numerous
optional commands as indicated in the functional specifi-
cation
z
z
z
Firmware can be upgraded via the IPMB bus
z
z
z
Monitors the state of the thermal sensor
Includes Device SDR’s (Sensor Data Records) - These
specify the type of sensor for each input (voltage, current,
temperature, etc.) as well as the conversion formulas from
raw ADC data to voltages, currents, etc.
Output inhibit can be controlled by IPMI commands
Self Test with LED indicator (can be read and overridden
by IPMI commands)
z
Includes FRU data such as model number, serial number
and firmware creation date
z
z
6 programmable thresholds on each analog sensor
Each threshold on each sensor can be enabled to generate
event messages if that threshold is crossed
2
Product: www.cdpoweronline.com
cPCI200-DC REV A 7/2003
MECHANICAL
NOTES: All measurements are in inches.
Weight: 1.4 lbs. (636g) net
PIN ASSIGNMENT: Pin assignment consistent with PICMG™ 2.11R1.0 specification. The table below details the PICMG™ assignment.
1
Pin #
1-4
5-12
13-18
19
Staging2
Signal Name Description
MECHANICAL
M
M
M
M
M
M
M
M
M
M
M
S
V1
V1 Output
Shock: MIL-STD-810d, Method 516.3, Procedure 1.
Vibration: MIL-STD-810d, Method 514.3, Procedure 1.
Dimensions: 3U x 4HP x 160mm (see Mechanical above)
RTN
V1 and V2 Return
V2 Output
V2
RTN
V3 Return
20
V3
V3 Output
21
V4
V4 Output
EMC & SAFETY
22
RTN
Signal Return
EMI: NEBS Compliant to GR1089 conducted emissions limit
ETSI Compliant to ETS 300-386 conducted emissions
limit
23
RESERVED
RTN
Reserved
24
V4 Return
25
GA0
Geographic Address Bit 0
Reserved
26
RESERVED
EN#
Safety Agency Ratings
Input Voltage:
Input Current:
Input Power:
Agency Approvals Pending
180 Watt
36-72 VDC
7A
225 Watt
36-72 VDC
9A
27
Enable
28
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
L
GA1
Geographic Address Bit 1
V1 Adjust
29
V1ADJ
V1 SENSE
GA2
30
V1 Remote Sense
Geographic Address Bit 2
V2 Adjust
260W
320W
31
32
V2ADJ
V2 SENSE
S RTN
33
V2 Remote Sense
Sense Return
UL1950/CSA950, EN60950, CE Mark.
(Low Voltage Directive)
34
35
V1 SHARE
V3 SENSE
IPMB SCL
DEG#
V1 Current Share
V3 Remote Sense
IPMB Serial Clock Line
Degrade Signal
Inhibit
36
37
38
39
INH#
40
IPMB SDA
V2 SHARE
FAL#
IPMB PWR
V3 SHARE
CGND
ACN/+DC IN
ACL/-DC IN
IPMB Serial Data Line
V2 Current Share
Fail Signal
IPMB Power Input
V3 Current Share
Chassis Grnd (Safety Grnd)
AC Input Neutral/+DC Input
AC Input Line/-DC Input
41
42
43
44
45
46
M
M
47
NOTES: (1) Pin numbers correspond to the female backplane connector.
(2) L = Long Length Pin (First Make, Last Break); M = Medium
Length Pins; S = Short Length Pins (Last Make, First Break)
3
Product: www.cdpoweronline.com
cPCI200-DC REV A 7/2003
ORDERING INFORMATION
PART NUMBER
cPCI200D-4
POWER
225 W
+5V
27A
18A
27A
18A
+3.3V
27A
+12V
4A
-12V
4A
IPMI
YES
YES
NO
cPCI200D-3
180 W
27A
4A
4A
4A
cPCI200D-2
cPCI200D-1
225 W
180 W
27A
27A
4A
4A
4A
NO
Power Electronics Division, Americas
3400 E Britannia Drive, Tucson, Arizona 85706
Tel: 800.547.2537 Fax: 520.295.4197
C&D Technologies, EMEA/Asia Pacific
Milton Keynes MK14 5BU UK
Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545
Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to
be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or
completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby
disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising
from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose
and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace
applications.
4
Product: www.cdpoweronline.com
cPCI200-DC REV A 7/2003
相关型号：
©2020 ICPDF网 联系我们和版权申明