PWR1215 [CANDD]

3 WATT UNREGULATED DC/DC CONVERTERS; 3 WATT非稳压DC / DC转换器
PWR1215
型号: PWR1215
厂家: C&D TECHNOLOGIES    C&D TECHNOLOGIES
描述:

3 WATT UNREGULATED DC/DC CONVERTERS
3 WATT非稳压DC / DC转换器

转换器
文件: 总4页 (文件大小:453K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Product Data Sheet  
3 WATTS UNREGULATED  
DC/DC CONVERTERS  
PWR12XX  
DESCRIPTION  
The PWR12XX Series offers a broad line of low-cost, high-  
performance, unregulated, single and dual output DC/DC  
converters in a 24-pin DIP package. These miniature  
converters offer better performance and lower cost in  
industry-standard packages and pinouts. The PWR12XX  
Series is internally filtered. No external parts are necessary.  
Surface mounted components and a low thermal resistance  
encapsulant allow for superior reliability, excellent thermal  
dissipation, and an extended temperature range of –25°C  
to +85°C at no extra cost.  
The PWR12XX Series is ideal for use on high-density PC  
boards where isolated, unregulated, power is needed.  
Standoffs allow for PC board cleaning, helping preserve  
isolation. They also allow for visual inspection of solder  
joints.  
FEATURES  
LOW COST  
INDUSTRY-STANDARD PACKAGE  
SINGLE AND DUAL OUTPUTS  
24-PIN DIP PACKAGE  
BUILT-IN STANDOFFS  
INTERNAL INPUT AND OUTPUT FILTERING  
MECHANICAL  
NC = Do Not Connect  
TOP VIEW  
SIDE VIEW  
Duplicatepinfunctionsareinternallyconnected.  
All dimensions are in inches (millimeters).  
GRID: 0.100 inches (2.54 millimeters)  
0.400+0.010  
(10.16)  
.805+0.010  
(20.45)  
.010+.005  
(0.25)  
PIN PLACEMENT TOLERANCE: 0.015"  
PWR12XX  
0.170  
MIN  
(4.32)  
0.100+0.015  
(2.54)  
.020+0.002  
(0.51)  
PIN # SINGLES DUALS  
1.270+0.010  
(32.25)  
1
2
3
+VIN  
NC  
NC  
+VIN  
VOUT  
Common  
BOTTOM VIEW  
1
2 3  
10 11 12  
10  
11  
12  
VOUT  
+VOUT  
VIN  
Common  
+VOUT  
VIN  
MATERIAL: Units are encapsulated in a low thermal resistance  
molding compound which has excellent chemical resistance, wide  
operating temperature range, and good electrical properties under  
high humidity environments. The encapsulant and outer shell of the  
unithaveUL94V-0ratings.Leadmaterialis brasswithasolderplated  
surface to allow ease of solderability.  
13  
14  
15  
VIN  
+VOUT  
VOUT  
VIN  
+VOUT  
Common  
0.60  
15.23  
22  
23  
24  
NC  
NC  
+VIN  
Common  
VOUT  
+VIN  
(.1025)  
2.601  
24 23 22  
15 14 13  
Internet: http://www.cdpowerelectronics.com  
Power Electronics Division, United States  
3400 E Britannia Drive, Tucson, Arizona 85706  
Phone: 800.547.2537 Fax: 520.295.4197  
Power Electronics Division, Europe  
C&D Technologies (Power Electronics) Ltd.  
132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland  
Tel: +353.61.474.133 Fax:+353.61.474.141  
PWR12XX 11/98 REV C  
Page 1  
ELECTRICAL SPECIFICATIONS  
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise noted.  
INPUT CURRENT  
NOMINAL  
RATED  
RATED  
REFLECTED  
INPUT VOLTAGE  
OUTPUT VOLTAGE OUTPUT CURRENT  
NO LOAD  
RATED LOAD  
(mA)  
RIPPLE CURRENT  
MODEL  
(VDC)  
(VDC)  
(mA)  
(mA)  
(mAp-p)  
PWR1200  
PWR1201  
PWR1202  
PWR1203  
PWR1204  
PWR1205  
5
5
5
5
5
5
5
12  
15  
5
12  
15  
600  
250  
200  
300  
125  
100  
30  
30  
30  
30  
30  
30  
800  
800  
800  
800  
800  
800  
45  
45  
45  
45  
45  
45  
PWR1206  
PWR1207  
PWR1208  
PWR1209  
PWR1210  
PWR1211  
12  
12  
12  
12  
12  
12  
5
12  
15  
5
12  
15  
600  
250  
200  
300  
125  
100  
30  
30  
30  
30  
30  
30  
330  
330  
330  
330  
330  
330  
25  
25  
25  
25  
25  
25  
PWR1212  
PWR1213  
PWR1214  
PWR1215  
PWR1216  
PWR1217  
15  
15  
15  
15  
15  
15  
5
12  
15  
5
12  
15  
600  
250  
200  
300  
125  
100  
30  
30  
30  
30  
30  
30  
265  
265  
265  
265  
265  
265  
20  
20  
20  
20  
20  
20  
PWR1218  
PWR1219  
PWR1220  
PWR1221  
PWR1222  
PWR1223  
24  
24  
24  
24  
24  
24  
5
12  
15  
5
12  
15  
600  
250  
200  
300  
125  
100  
30  
30  
30  
30  
30  
30  
165  
165  
165  
165  
165  
165  
20  
20  
20  
20  
20  
20  
PWR1240  
PWR1241  
PWR1242  
PWR1243  
5
12  
15  
24  
9
9
9
9
333  
333  
333  
333  
30  
30  
30  
30  
800  
330  
265  
165  
45  
25  
20  
20  
COMMON SPECIFICATIONS  
Specifications typical at TA = +25°C, rated input voltage, rated output current unless otherwise noted.  
PARAMETER  
CONDITIONS  
MIN  
TYP  
MAX  
UNITS  
INPUT  
VoltageRange  
4.5  
5
12  
15  
24  
5.5  
13.2  
16.5  
26.4  
VDC  
VDC  
VDC  
VDC  
10.8  
13.5  
21.6  
ISOLATION  
RatedVoltage  
Test Voltage  
Resistance  
Capacitance  
LeakageCurrent  
500  
500  
VDC  
Vpk  
GW  
pF  
µArms  
60 Hz, 10 Seconds  
10  
90  
10  
VISO = 240VAC, 60HZ  
OUTPUT  
RatedPower  
3
3
0.02  
W
%
%/%°C  
Voltage Setpoint Accuracy  
TemperatureCoefficient  
RippleandNoise  
(BW = DC to 20MHz)  
Rated Load, Nominal VIN  
5
No External Components  
10µF Across Each Output  
10µF Across Each Output  
No Load,VOUT = +5V  
No Load,VOUT = 12V  
No Load,VOUT = 15V  
150  
10  
30  
mVp-p  
mVrms  
mVp-p  
VDC  
VDC  
VDC  
Voltage  
7
15  
18  
LineRegulation  
Load  
1.2  
6
%/%VIN  
%
No Load To Rated Load  
Circuit Stress Method  
GENERAL  
Package Weight  
SwitchingFrequency  
MTTFper MIL-HDBK-217,RevE*  
Efficiency  
12  
150  
700  
75  
g
kHz  
kHr  
%
TEMPERATURE  
Specification  
Operation  
25  
40  
40  
+25  
+85  
+125  
+125  
°C  
°C  
°C  
Storage  
* For demonstrated MTTF results reference Power Convertible's Reliability Report PWR1205  
Page 2  
PWR12XX 11/98 REV C  
ABSOLUTE MAXIMUM RATINGS  
APPLICATION NOTES  
UNBALANCED LOADS  
Output Short-Circuit Duration ................................................... Momentary  
Internal Power Dissipation.................................................................. 1.3W  
Lead Temperature (soldering, 10 seconds max) ............................ +300°C  
Unbalanced loads may be used on dual output models  
with either side providing up to its rated current. Output  
voltages, by design, will track each other in an unbal-  
anced state within 10% of one another.  
ORDERING INFORMATION  
PWR  
12XX  
OUTPUT NOISE  
Device Family  
PWR indicates DC/DC converter  
Output noise can be reduced to 30mVp-p, typically, by  
adding a 10µF tantalum capacitor with an equivalent  
series resistance (ESR) of less than 150mW at 10kHz  
across each output.  
Model Number  
Selected from Table of Electrical Characteristics  
TYPICAL PERFORMANCE CURVES  
TA = +25°C, Rated Input Voltage, Rated Output Current unless otherwise noted.  
PWR12XX 11/98 REV C  
Page 3  
TYPICAL PERFORMANCE CURVES  
TA = +25°C, Rated Input Voltage, Rated Output Current unless otherwise noted.  
Any data, prices, descriptions or specifications presented herein are subject to revision by C&DTechnologies, Inc.without notice. While such information is believed to be accurate as indicated herein, C&D  
Technologies, Inc.makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein  
may be used under conditions beyond its control, C&DTechnologies, Inc.hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or  
in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for users intended purpose and in  
users specific application.C&DTechnologies, Inc.does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications.  
Page 4  
PWR12XX 11/98 REV C  

相关型号:

PWR1215/H

Analog IC
ETC

PWR1216

3 WATT UNREGULATED DC/DC CONVERTERS
CANDD

PWR1216/H

Analog IC
ETC

PWR1217

3 WATT UNREGULATED DC/DC CONVERTERS
CANDD

PWR1217/H

Analog IC
ETC

PWR1218

3 WATT UNREGULATED DC/DC CONVERTERS
CANDD

PWR1218/H

Analog IC
ETC

PWR1219

3 WATT UNREGULATED DC/DC CONVERTERS
CANDD

PWR1219/H

Analog IC
ETC

PWR122

2-OUTPUT 0.45W DC-DC UNREG PWR SUPPLY MODULE
BB

PWR122/G

2-OUTPUT 0.45W DC-DC UNREG PWR SUPPLY MODULE
BB

PWR122/T

2-OUTPUT 0.45W DC-DC UNREG PWR SUPPLY MODULE
BB