SX400-U1B [CANDD]
400 WATT AC/DC POWER SUPPLY; 400瓦AC / DC电源型号: | SX400-U1B |
厂家: | C&D TECHNOLOGIES |
描述: | 400 WATT AC/DC POWER SUPPLY |
文件: | 总4页 (文件大小:168K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Product Data Sheet
400 WATT
AC/DC POWER SUPPLY
SX400
FEATURES
l Active Power Factor Correction
DESCRIPTION
The SX400 is a compact 400 watt Power Factor
Corrected, single output power supply. Active
current sharing circuitry with ORing diodes, to-
gether with control functions and alarm options,
simplifies N+1 and redundant applications.
l Active Current Sharing With ORing Diodes
l FCC/VDE Class B EMI Filter
l Optional Active Inrush Current Limit
l Compact Size: 10” x 4.85” x 2.19”
l Optional SCR Crowbar
AGENCY APPROVALS
l Optional Cover With Fan
See “Safety” section on page 2 for more information
3400 E Britannia Drive
• Tucson, Arizona 85706 • Phone: 520.295.4100 • Fax: 520.770.9369 • Internet: http://www.cdpowerelectronics.com
SX400 2/98 REV A
Page 1
Input Specifications
Parameter
Operating Range
Inrush Current Limiting
Thermistor
Conditions
Min
90
Typ
Max
264
Units
VAC
47-63 Hz
120VAC, cold start
240VAC, cold start
264 VAC
30
60
APK
APK
APK
%
Active Current Limit
Efficiency
19
75
Nominal line and full load
Power Factor Correction (PFC)
0.99
Meets IEC 1000-4-7/EN61000-3-2 (formerly IEC 555-2)
Power Fail Signal
Remote Sense
Upon AC input voltage removal, the power fail signal drops
to logic zero at least 10msec before loss of DC output.
Upon AC input turn-on, signal remains low until output is in
regulation. Consult the factory for other options.
Remote Sense is provided and will compensate for 1.0V
of line drop. Remote Sense leads are protected against
open, short and reversal.
Remote On/Off (Optional)
N+1 Load Share
Output has active load sharing circuitry. Units will load
share within 1% of the Maximum Rated Load.
The power supply is turned on with aTTL logic‘1’(or open)
signal and turned off by a switch closure or TTL logic ‘0’
referenced to (-) sense terminal. Consult the factory for
other options.
Over Temperature Protection
Thermal switch turns off power supply if overheating occurs
and automatically restarts.
Over Voltage Protection
Output #1: 15% of nominal voltage is typical.
The power supply will latch off until AC power is cycled.
Safety
UL Recognized: UL File Number E13164 (1950)
CSA Certified: CSA File Number LR 9070C
(C22.2 No950, Level 6)
Over Current Protection
Automatic recovery upon fault removal.
TUV License Number: R9773309 (EN60950) (IEC950)
Transient Response
The peak output voltage excursion will not exceed 2% and
will recover within 1% in 200 µsec for a 25% step load.
Cooling
The unit is designed to operate with 30 CFM of airflow.
Reverse Voltage Protection
DC Power Good Signal
The output is protected to rated load.
The signal is activated by a ±10% loss of regulation Active
low or high;TTL Level; common with (-) sense. Consult the
factory for other options.
Page 2
SX400 2/98 REV A
Output Voltages and Maximum Rated Loads
OUTPUT
MODEL NUMBER
VOUT
IMAX
IPK
SX400-U1A
±24V
17A
21A
SX400-U1B
±28V
14A
17.5A
SX400-U1C
SX400-U1D
±36V
±48V
11A
13.5A
10.5A
8.5A
Output Specifications
Parameter
Limits
Regulation
Line
± 0.2%
±0.5%
Load
Minimum Load
Hold-UpTime
0.1A
20mSec at Full Load
Parameter
Voltage Adjustment Range
PARD
Conditions
Min
Typ
±5
Max
Units
%
20 MHz bandwidth
0.5
% P-P
Temperature
Operating
0
50
°C
°C
Storage
-20
+85
Temperature Coefficient (TC)
After half hour warm-up
± 0.02
% /°C
SX400 2/98 REV A
Page 3
Mechanical
0.040
COVER
8.500
2.148
J9
0.700
0.550
1.300
3.900
PIN 1
4.850
TB2
PIN 1
10.00
6-32 THD
(4x)
0.620
3.190
NOTES:
All measurements are in inches
FAN MOUNTED ON COVER ADDS 1.30”.
COOLING: The SX400 is designed to operate with 30 CFM airflow.
SHOCK AND VIBRATION: The SX400 family meets the requirements of MIL STD-810D. (Vibration-Method 514.3 Procedure 1. Shock-Method 516.3 Procedure 1.)
WEIGHT: Approximately 4 lbs.
Connector Specifications
Pin Specifications
Terminal Block 1
Terminal Block 2
J9 Connector
Molex No. 22-28-1093
POS
FUNCTION
POS
FUNCTION
+V
1
2
3
Ground
AC Neutral
AC Line
1
PIN
1
FUNCTION
- Sense
2
3
4
+V
-V
-V
2
+ Sense
3
Current Share
Remote Inhibit
Power Fail
DC OK
4
5
6
7
Sync
8
Signal Ground
N/C
9
Standard Options are shown, consult factory for other available options.
The information provided herein is believed to be reliable; however, C&D Technologies assumes no responsibility for inaccuracies or omissions. C&D Technologies assumes no
responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No
patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D Technologies does not authorize or warrant any C&D Technologies product
for use in life support devices/systems or in aircraft control applications.
Page 4
SX400 2/98 REV A
相关型号:
SX420A
Film Capacitor, Polystyrene, 630V, 10% +Tol, 10% -Tol, 0.00002uF, Through Hole Mount, AXIAL LEADED
CDE
SX424
Film Capacitor, Polystyrene, 630V, 5% +Tol, 5% -Tol, 0.000024uF, Through Hole Mount, AXIAL LEADED
CDE
SX4245
Rectifier Diode, 1 Element, 1A, 200V V(RRM), Silicon, HERMETIC SEALED, GLASS, 103, 2 PIN
SENSITRON
SX4245US
Rectifier Diode, 1 Element, 1A, 200V V(RRM), Silicon, HERMETIC SEALED, GLASS, MELF-1, 2 PIN
SENSITRON
SX4246
Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, HERMETIC SEALED, GLASS, 103, 2 PIN
SENSITRON
SX4246US
Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, HERMETIC SEALED, GLASS, MELF-1, 2 PIN
SENSITRON
©2020 ICPDF网 联系我们和版权申明