UA18CAD09NKTI [CARLOGAVAZZI]
Ultrasonic Diffuse, Analogue and Digital Output Types UA18CAD......TI;型号: | UA18CAD09NKTI |
厂家: | Carlo Gavazzi |
描述: | Ultrasonic Diffuse, Analogue and Digital Output Types UA18CAD......TI |
文件: | 总4页 (文件大小:498K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ultrasonic
Diffuse, Analogue and Digital Output
Types UA18CAD......TI
• Cylindrical M18 PBT housing
• Sensing distance: 50-2200 mm
• Power supply: 15 to 30 VDC
• Outputs: 0-10 VDC or 4-20 mA and one switching
output NPN or PNP, NO or NC.
• Linearity error 1%
• Repeatability 0.5%
• Beam angle. ±±7 or ±87
• Protection: Short-circuit, reverse polarity and
overvoltage
• Protection degree IP 6±
• 2 m cable or M12 plug
Product Description
Ordering Key
UA18CAD04NGM1TI
A family of diffuse ultrasonic
sensors with sensing range
from 50-400 mm, 100-900
mm and 200-2200 with a
resolution as low as 1.0 mm.
The sensor contains both an
analogue and a digital output.
The output is either 0-10V
or 4-20 mA and the digit-
al output NPN or PNP, NO
or NC which forms a win-
dow detection. The sensor is Ultrasonic sensor
the ideal choice for distance Housing style
measurement, level measure- Housing size
ment, diameter measurement Housing material
or loop control.
Housing length
Due to use of microproces- Detection principle
sor control the digital filtering Sensing distance
makes the sensor immune to Output type
most electromagnetic inter- Output configuration
ferences.
Connection
Teach-in
Type Selection
Housing
diameter
Connec-
tion
Rated operating
dist. (Sn)
Analog
Output
Digital output
NPN/PNP
Ordering no.
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
M18
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
Plug M12
Cable
50-400 mm
50-400 mm
50-400 mm
50-400 mm
50-400 mm
50-400 mm
50-400 mm
50-400 mm
100-900 mm
100-900 mm
100-900 mm
100-900 mm
100-900 mm
100-900 mm
100-900 mm
100-900 mm
200-2200 mm
200-2200 mm
200-2200 mm
200-2200 mm
200-2200 mm
200-2200 mm
200-2200 mm
200-2200 mm
4-20 mA
4-20 mA
0-10 V
NPN
NPN
NPN
NPN
PNP
PNP
PNP
PNP
NPN
NPN
NPN
NPN
PNP
PNP
PNP
PNP
NPN
NPN
NPN
NPN
PNP
PNP
PNP
PNP
UA 18 CAD 04 NG M1 TI
UA 18 CAD 04 NG TI
UA 18 CAD 04 NK M1 TI
UA 18 CAD 04 NK TI
UA 18 CAD 04 PG M1 TI
UA 18 CAD 04 PG TI
UA 18 CAD 04 PK M1 TI
UA 18 CAD 04 PK TI
UA 18 CAD 09 NG M1 TI
UA 18 CAD 09 NG TI
UA 18 CAD 09 NK M1 TI
UA 18 CAD 09 NK TI
UA 18 CAD 09 PG M1 TI
UA 18 CAD 09 PG TI
UA 18 CAD 09 PK M1 TI
UA 18 CAD 09 PK TI
UA 18 CAD 22 NG M1 TI
UA 18 CAD 22 NG TI
UA 18 CAD 22 NK M1 TI
UA 18 CAD 22 NK TI
UA 18 CAD 22 PG M1 TI
UA 18 CAD 22 PG TI
UA 18 CAD 22 PK M1 TI
UA 18 CAD 22 PK TI
0-10 V
4-20 mA
4-20 mA
0-10 V
0-10 V
4-20 mA
4-20 mA
0-10 V
0-10 V
4-20 mA
4-20 mA
0-10 V
0-10 V
4-20 mA
4-20 mA
0-10 V
0-10 V
4-20 mA
4-20 mA
0-10 V
0-10 V
Specifications are subject to change without notice (12.05.2014)
1
UA18CAD..
Specifications
Rated operating distance (Sn) Reference target: 1 mm
metal rolled finish.
Operating frequency digital
output (f)
CAD04: 100 x 100 mm
CAD09 and CAD22:
200 x 200 mm
UA18CAD04...
≤ 10 Hz
≤ 4 Hz
≤ 1 Hz
UA18CAD09...
UA18CAD22...
UA18CAD04
UA18CAD09
UA18CAD22
50 - 400 mm
100 - 900 mm
200 - 2200 mm
Response time OFF-ON
digital output (t
UA18CAD04...ON
UA18CAD09...
UA18CAD22...
)
≤ 50 mS
≤ 125 mS
≤ 500 mS
Blind zone
UA18CAD04...
UA18CAD09...
UA18CAD22...
≤ 50 mm
≤ 100 mm
≤ 200 mm
Response time ON-OFF
digital output (t
UA18CAD04...OFF
UA18CAD09...
UA18CAD22...
)
Repeatability
Linear Accuracy
Beam angle
UA18CAD04...
UA18CAD09...
UA18CAD22...
0.5%
1%
≤ 50 mS
≤ 125 mS
≤ 500 mS
Response time analog output ≤ 500 mS
Power ON delay
Output function, open
collector
By sensor type
±8ꢀ
±±ꢀ
±±ꢀ
≤ 500 mS
Sensitivity
Push-button
P1 (farthest setpoint)
P2 (nearest setpoint)
1 mm
NPN or PNP
Output switching function
One open collector transis-
tor and one analogue
Resolution
Temperature drift
Temperature compensation Yes
Hysteresis (H)
Rated operational voltage (UB) 15 to 30 VDC
0.1%/ꢀC @ -20ꢀ to +60ꢀ C
output to be configured as:
Window function with N.O
or N.C. output.
Analogue output with posi-
tive or negative slope.
Min. 1%
(ripple included)
Indication Output ON
Environment
Installation category
Yellow LED
Ripple (Urpp
)
≤ 5%
No-load supply current (Io)
UA18CAD04...
UA18CAD09...
lll (IEC 60664/60664A;
6094±-1)
3 (IEC 60664/60664A;
6094±-1)
45 mA @ U max
45 mA @ UB max
50 mA @ UBB max
Pollution degree
UA18CAD22...
Degree of protection
IP6± (IEC 60529; 6094±-1)
Output current continuous
digital output (Ie)
Max. load capacity 100 nF
UL508 specification
Ambient temperature
Operating
Storage
500 mA
100 mA
-20° to +60°C (-4° to +140°F)
-35° to +±0°C (-31° to +158°F)
Output current short-time
digital output (I)
Max. load capacity 100 nF
UL508 specification
Vibration
10 to 55 Hz, 1.0 mm/6g
(IEC/EN 60068-2-6)
500 mA
100 mA
Shock
30 g / 11 mS, 3 directions
(IEC/EN 60068-2-2±)
Minimum operational current
digital output (Im)
OFF-state current digital
output (Ir)
Voltage drop digital output (Ud) ≤ 2.2 VDC @ Ie max.
Protection digital output
Rated insulation voltage
Housing
Material body
< 500 VAC (rms)
0.5 mA
PBT
10 μA
Material front
Epoxy-glass resin
Grilamid
Grilamid
POM
Material back, plug
Material back, cable
Material trimmer
Sealing around trimmer
Material sealing front
UA18CAD04...
UA18CAD09...
UA18CAD22...
Short-circuit, overvoltage
and reverse polarity
TPE
Output analog output
NG.. or PG.. types
NK.. or PK.. types
4 to 20 mA
0 to 10 VDC
TPE
TPE
PBT
Load
4 to 20 mA
0 to 10 VDC
max. 500 Ω
min. 3 kΩ
Connection
Cable
PVC, grey, 2 m,
4 x 0.32 mm2, Ø = 4.± mm
M12, 4-pin (CON. 14-series)
Carrier frequency
UA18CAD04...
UA18CAD09...
UA18CAD22...
400 kHz
300 kHz
200 kHz
Plug
Tightening torque
≤ 1 Nm
2
Specifications are subject to change without notice (12.05.2014)
UA18CAD..
Specifications (cont.)
Weight
Cable version
Plug version
CE-marking
Approvals
Yes
98 g
35 g
cULus (UL508)
Wiring Diagram
Detection Range
X
Target
Y
Sensor
BN1
WH2
BN1
WH2
Distance (Inches)
7,9 11,8
0
3,9
15,7
19,7
100,0
80,0
60,0
3,9
3,1
BK4
BK4
PNP:
U
I
Target 100 x 100 mm
2,4
BU3
BU3
40,0
20,0
1,6
0,8
Target Ø 25 mm
Voltage
Current
0,0
0,0
-20,0
-40,0
-60,0
-80,0
-100,0
-0,8
-1,6
-2,4
-3,1
-3,9
BN1
BN1
I
BK4
BK4
U
NPN:
WH2
WH2
0
100
200
300
400
500
BU3
BU3
Distance (mm)
UA 18 CAD 04 ...
X
Target
Y
Sensor
Distance (Inches)
Dimensions
0,0
7,9
15,7
23,6
31,5
39,4
7,9
200,0
150,0
100,0
50,0
5,9
8.3
Target 200 x 200 mm
Target Ø 25 mm
Teach
3,9
3
12.4
3
2,0
0,0
0,0
-2,0
-3,9
-5,9
-7,9
-50,0
-100,0
-150,0
-200,0
LED indication
1÷2.5
63.5
17.6
83.6÷85.1
0
200
400
600
800
1.000
Cable
Distance (mm)
UA 18 CAD 09 ...
8.3
Teach
X
LED indication
3
12.6
Target
Y
Sensor
Distance (Feet)
0,0
1,2
2,4
3,6
4,8
6,0
7,2
250,0
200,0
150,0
100,0
50,0
9,8
7,9
5,9
3,9
Target 200 x 200 mm
1÷2.5
57.5
17.6
Target Ø 25 mm
2,0
77.7÷79.2
14
0,0
0,0
PLUG
-50,0
-100,0
-150,0
-200,0
-250,0
-2,0
-3,9
-5,9
-7,9
-9,8
0
400
800
1.200
1.600
2.000
2.400
Distance (mm)
UA 18 CAD 22 ...
Specifications are subject to change without notice (12.05.2014)
3
Programming setup
General set up of sensing point P1 (longest distance) and P2 (shortest distance) independently of the sensor type
or function.
1) Mount the sensor in the selected application.
2) Place a target in front of the sensor at the maximum required distance (P1), then press shortly on the teach-button.
The yellow LED switches Off and then On again after a maximum of 2 seconds. Now, the distance (P1) is saved in
the sensor, and the target can be moved. I)
3) Place the target at the minimum distance requested (P2), then press shortly on the teach-button. The yellow LED
turns Off and then flashes 5 times. Now, the distance (P2) is saved in the sensor and the target can be moved. II)
I) P1 can be set to maximum exceeding the family specification for the sensor by removing the target in front of
the sensor. Push and hold the teach-button more than one second and the sensing distance is set at a unique
distance for this sensor only. Do not use this function for an analogue output.
II) The second switch point can be set to minimum by setting the target within the blind zone close to the sensor
head or by covering the sensor head with your hand while teaching P2.
Sensors with 1 digital output and one analogue output UA..CAD..PG/PK/NG or NK types
1) The factory settings are Normally Open (N.O.) for the digital output and positive slope for the analogue output.
Digital output
distance
2) To reverse the slope to negative and reverse the N.O. output to N.C., push the teach-button for 8
seconds (12 for UC18CAD22..) until the yellow LED flashes fast. Release the teach-button and the LED will flash 5
times to acknowledge the change in function.
Digital output
3) To switch back to positive slope or N.O. output, repeat step 2.
Installation Hints
To avoid interference from inductive voltage/ Relief of cable strain
current peaks, separate the prox. switch
Protection of the sensing face
Switch mounted on mobile carrier
power cables from any other power cables,
e.g. motor, contactor or solenoid cables
Incorrect
Correct
The cable should not be pulled
Any repetitive flexing of the
cable should be avoided
A proximity switch should not serve as
mechanical stop
Delivery Contents
• Ultrasonic sensor: UA18CAD....
• Installation instruction
• Mounting:
2 x M18 Nuts
2 x rubber washers
• Packaging: Carton box 35 x 10± x 1±3 mm
4
Specifications are subject to change without notice (12.05.2014)
相关型号:
©2020 ICPDF网 联系我们和版权申明