UA30EAD35PGTI [CARLOGAVAZZI]

Ultrasonic Diffuse, Analogue and Digital Output Types UA30EAD......TI;


型号：	UA30EAD35PGTI
厂家：	Carlo Gavazzi
描述：	Ultrasonic Diffuse, Analogue and Digital Output Types UA30EAD......TI
文件：	总4页 (文件大小：376K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Ultrasonic

Diffuse, Analogue and Digital Output

Types UA30EAD......TI

• Cylindrical M30 Stainless Steel INOX

AISI 316L housing

• Sensing distance: 350-3500 mm

• Power supply: 12 (15) to 30 VDC

• Outputs: 0-10 VDC or 4-20 mA and one switching

output NPN or PNP.

• Linearity error 1%

• Repeatability 1%

• Beam angle. ±±7

• Protection: Short-circuit, reverse polarity and

overvoltage

• Protection degree IP 6±

• 2 m cable or M12 plug

Product Description

Ordering Key

UA30EAD35NGM1TI

A family of diffuse ultrason-

ic sensors in Stainless steel

housing and with sensing

range from 350-3500 mm

with a resolution as low as

2.0 mm.

forms a windows detection. Ultrasonic sensor

The sensor is the ideal choice Housing style

for distance measurement, Housing size

level measurement, diameter Housing material

measurement or loop control. Housing length

Due to use of microproces- Detection principle

sor control the digital filtering Sensing distance

makes the sensor immune to Output type

most electromagnetic inter- Output configuration

The sensor contains both an

analogue and a digital output.

The output is either 0-10V or

4-20 mA and the digital output

NPN or PNP, NO or NC which

ferences.

Connection

Teach-in

Type Selection

Housing

diameter

Connec-

tion

Rated operating

dist. (S_n)

Analog

Output

Digital output

NPN/PNP

Ordering no.

M30

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

Plug M12

Cable

350-3500 mm

4-20 mA

0-10 V

NPN

PNP

UA 30 EAD 35 NG M1 TI

UA 30 EAD 35 NG TI

UA 30 EAD 35 NK M1 TI

UA 30 EAD 35 NK TI

UA 30 EAD 35 PG M1 TI

UA 30 EAD 35 PG TI

UA 30 EAD 35 PK M1 TI

UA 30 EAD 35 PK TI

0-10 V

4-20 mA

0-10 V

Specifications

Rated operating distance (S_n) Reference target: 1 mm

metal rolled finish, size

Rated operational voltage (U_B)

NG or PG versions

NK or PK versions

12 to 30 VDC

15 to 30 VDC

(ripple included)

400 x 400 mm.

350 - 3500 mm

Blind zone

≤ 350 mm

Ripple (U_rpp

)

≤ 5%

Repeatability

Linearity error

Beam angle

Sensitivity

Push-button

7ꢀ

No-load supply current (I_o)

50 mA @ U_Bmax

Output current continuous

digital output (I_e)

Max. load capacity 100 nF

100 mA

Output current short-time

digital output (I)

Max. load capacity 100 nF

P1 (longest setpoint)

P2 (shortest setpoint)

2 mm

100 mA

0.5 mA

10 μA

Resolution

Minimum operational current

digital output (I_m)

OFF-state current digital

output (I_r)

Temperature drift

Temperature compensation Yes

Hysteresis (H)

0.1%/ꢀC @ -20ꢀ to +70ꢀ C

Min. 1%

Specifications are subject to change without notice (06.06.2017)

UA30EAD..

Specifications (cont.)

Voltage drop digital output (U_d) ≤ 2.2 VDC @ 100 mA

Environment

Installation category

lll (IEC 60664/60664A;

60947-1)

3 (IEC 60664/60664A;

60947-1)

Protection

Digital output

Short-circuit, overvoltage

pulses and reverse polarity

Overvoltage pulses and

reverse polarity

Pollution degree

Supply

Degree of protection

IP67 (IEC 60529; 60947-1

Analogue output

Overvoltage pulses

Ambient temperature

Operating

Storage

-20° to +70°C (-4° to +158°F)

-35° to +70°C (-31° to +158°F)

Analog output

NG.. or PG.. types

NK.. or PK.. types

4 to 20 mA

0 to 10 VDC

Vibration

10 to 55 Hz, 1.0 mm/6G.

(IEC/EN 60068-2-6)

Load

4 to 20 mA

0 to 10 VDC

≤ 500 Ω

≥ 3 kΩ

Shock

30 g / 11 mS, 3 directions

(IEC/EN 60068-2-27)

Carrier frequency

112 kHz

Rated insulation voltage

< 500 VAC (rms)

Operating frequency digital

Housing

output (f)

≤ 2 Hz

Material body

AISI 316L

Epoxy-glass resin

Grilamid

TPE

Material front

Response time OFF-ON

Material back, plug

Material back, cable

Material push-button

Sealing around push-button

Material sealing front

digital output (t_ON

)

≤ 250 mS

Response time ON-OFF

digital output (t_OFF

)

Response time analog output ≤ 500 mS

Power ON delay

≤ 500 mS

Connection

Cable

PVC, grey, 2 m,

Output function, open

collector

By sensor type

4 x 0.34 mm², Ø = 4.7 mm

M12, 4-pin (CON.

Plug

14-series)

NPN or PNP

Output switching function

One open collector transis-

tor and one analogue

Tightening torque

≤ 100 Nm

output to be configured as:

- Windows function with

N.O or N.C. output.

- Analogue output with

positive or negative slope.

Weight

Cable version

Plug version

220 g

150 g

CE-marking

Approvals

Yes

cULus (UL508)

Indication

Output ON

Echo received

Yellow LED

Green LED

Wiring Diagram

Detection Range

Target

Distance (feet)

4.9 6.6

Sensor

BN1

WH2

BN1

WH2

1.6

3.3

8.2

9.8 11.5

400

300

200

100

15.7

11.8

7.9

BK4

PNP:

BU3

3.9

Voltage

Current

BN1

-100

-200

-300

-400

-3.9

-7.9

-11.8

-15.7

BK4

NPN:

WH2

BU3

0.5

1.0

1.5

2.0

2.5

3.0

3.5

Distance (m)

Specifications are subject to change without notice (06.06.2017)

UA30EAD..

Dimensions

Plug

Cable

Teach

Yellow

Green

Yellow

Green

10.5

100

Programming setup

General set up of sensing point P1 (longest distance) and Shortest distance (P2) independent on the sensor type or

function.

1) Mount the sensor in the selected application

2) Place a target in front of the sensor at the maximum required distance (P1), then press shortly on the teach-button,

the Yellow LED switch Off and then On again after maximum 2 seconds. The distance (P1) is now saved in the

sensor, and the target can be moved. I)

3) Place the target at the minimum distance requested (P2), then press shortly on the teach-button, the yellow LED

turn Off then flash 5 times . The distance (P2) is now saved in the sensor and the target can be moved. II)

I) P1 can be set to a maximum exceeding the family specification for the sensor by removing the target in front of

the sensor, push and hold the teach-button more than one second and the sensing distance is set at a unique

distance for this sensor only. Do not use this function for an analogue output.

II) The second switch point can be set to minimum by setting the target within the blind zone close to the sensor

head or by covering the sensor head with your hand while teaching P2.

Sensors with 1 digital output and one analogue output UA..EAD..PG/PK/NG or NK types

1) The factory setting is Normally Open N.O. for the digital output and positive slope for the analogue output.

Digital output

distance

2) To reverse the slope to negative and reverse the N.O. output to Normally Closed N.C. Push the teach-button for 8

second until the yellow LED flash fast release the teach button and the LED will flash 5 times to acknowledge the

change in function.

Digital output

3) To switch back to positive slope or N.O. output, repeat step 2.

Specifications are subject to change without notice (06.06.2017)

UA30EAD..

Installation Hints

To avoid interference from inductive voltage/ Relief of cable strain

current peaks, separate the prox. switch

Protection of the sensing face

Switch mounted on mobile carrier

power cables from any other power cables,

e.g. motor, contactor or solenoid cables

Incorrect

Correct

The cable should not be pulled

Any repetitive flexing of the

cable should be avoided

A proximity switch should not serve as

mechanical stop

Delivery Contents

Accessories

• Connector type CONB14NF.. series

• Ultrasonic sensor: UA30EAD....

• Installation instruction

• Mounting: 2 x M30 Nuts

• Packaging: Carton box 35 x 107 x 173 mm

Specifications are subject to change without notice (06.06.2017)

UA30EAD35PGTI [CARLOGAVAZZI]

相关型号：

UA30EAD35PKM1TI

UA30EAD35PKTI

UA31136-P16-R

UA31136L-P16-R

UA311HC

UA311HCQM

UA311HCQR

UA311RC

UA311RCQR

UA311SC

UA318

UA318HC