225P82491YD3 [CDE]
Film Capacitor, Polyester, 100V, 10% +Tol, 10% -Tol, 1uF, Through Hole Mount, RADIAL LEADED;型号: | 225P82491YD3 |
厂家: | CORNELL DUBILIER ELECTRONICS |
描述: | Film Capacitor, Polyester, 100V, 10% +Tol, 10% -Tol, 1uF, Through Hole Mount, RADIAL LEADED 电容器 |
文件: | 总8页 (文件大小:312K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Type 225P, Orange Drop®, Polyester Film/Foil Capacitors
Features
• Radial-lead. Pressed profile.
• Non-inductively wound, extended
foil construction.
• Over 35 years o f proven dependability.
Insulation Resistance:
• Wide availability through CDE
Distribution.
At +25°C: 100,000 Mꢀ for ꢁ .25 µF
25,000 M -µF for C > .25 µF
ꢀ
ꢁ
At +85°C: 10,000 M
1,500M
At+105°C: 1.500 M
250 M
At +125°C: 200 M
25 M
ꢀ
ꢀ
ꢀ
for C .15 µF
-µFfor C >.15 µF
for C .17 µF
-µF for C > .17µF
for C .13 µF
-µF for C >.13 µF
Specifications
ꢁ
Capacitance Range:
ꢀ
ꢀ
ꢀ
.00 to 1.0 µF
ꢁ
Capacitance Tolerance:
±5%, ±10%, ±20%
Dissipation Factor:
0.75% Maximum @ 1 KHz, +25°C
Voltage Ratings:
100 to 600 Volts DC
Encapsulation:
Conformal coating of orange, flame
retardant epoxy. Meets UL94V-0
specifications.
Operating Temperature Range:
-55°C to +85°C (at full voltage)
Dielectric/Construction:
Voltage Derating:
Polyester film, single section design.
Non-inductively wound with extended
aluminum foil.
At +105°C, 70% of +85°C rating.
At +125°C, 50% of +85°C rating.
Lead Wire:
Tinned copper-clad steel,
.032 (0.8) diameter, #20 AWG
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 225P, Orange Drop®, Polyester Film/Foil Capacitors
General Specifications
The Type 225P Orange Drop® is designed and manufactured for operation in a wide range of demanding envi-
ronments and applications. Type 225P capacitors are wound from the most reliable polyester film and alum-
inum foil available and are protected by a rugged conformal coating of orange epoxy. They may be operated
up to +125°C with proper derating.
The combination of proven dependability and extensive availability through CDE distribution make
the 225P an ideal choice for many commercial and industrial electronic applications, from power supplies and
instrumentation to audio amplifiers and test equipment.
Operating Temperature Range:
Humidity Testing:
The standard operating temperature range for
polyester film is -55°C to +85°C. The 225P
may be operated at full voltage within this
temperature range.
Units subjected to 95% relative humidity for 72
hours with no voltage applied at +75°C. After 4
hours of drying minimum product of insulation
resistance and capacitance shall be 5,000 M -µF.
The 225P may be operated up to +105°C
provided the DC working voltage is reduced
to 70% of the +85°C rating (full rating), and
up to +125°C with a 50% reduction from the
+85°C rating (full rating).
DC Voltage Life Test:
500 hours at +85°C at 150% of rated voltage. After
test; capacitance shall not have changed by more
than ±5% of initial value, insulation resistance shall
not have decreased by more than 50% of initial value
and dissipation factor shall not have increased to
more than 1.0%. In addition, there should be no
open or short circuits, and no sign of visible damage.
For more specific details regarding operation
above +85°C please contact our design
engineering department.
The maximum operating temperature for the
225P polyester film capacitors is +125°C.
Typical Temperature Characteristics:
Dielectric Withstanding Voltage:
Units shall withstand a DC potential of 250%
of rated voltage applied between terminals for
not more than 5 seconds.
Lead Bend Test:
After 3 consecutive 180° bends. No damage.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 225P, Orange Drop®, Polyester Film/Foil Capacitors
Ordering/Part Number information
225P
104
9
1
W
D
3
(XXXX)
A suffix may be added by
the factory to denote special
construction.
Lead Length
1 =0.187 (4.7) ±0.030 (0.8)
2 = 0.250 (6.4) ± 0.030 (0.8)
3 = 1.250 (32) Minimum
Custom lead lengths available upon request.
Terminal
A = Straight Lead
B,F = Hairpin Crimp
D,G,H = Hockey Stick Crimp
Case Code See Standard Sizes/Ratings Table
Expressed in Hundreds of Volts
D-C Voltage Rating
Capacitance Tolerance
0 = ±20%; 9 = ±10%; 5 = ±5%
Capacitance Expressed in Picofarads. The first two digits are the significant figures,
the third is the number of zeros following, (i.e. 104 = 100000 pF = . 1 µF)
CDE Type Number Identifies the basic capacitor design.
Standard Marking Format
Tolerance codes
per EIA Standards
Sample Marking
on unit
Description
CDE - CDE Electronics identification
225P - Type number
100V - D-C Voltage rating, Volts
104K - Capacitance and tolerance code
9810 - Weekly date code
J
K
M
±5%
±10%
±20%
CDE225P100V
104K 9810
(i.e. 10th week of 1998)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 225P, Orange Drop®, Polyester Film/Foil Capacitors
Standard Lead Styles
TERMINAL B,F
TERMINAL A
TERMINAL D,G,H
Standard Lead Spacings
s
CASE
CODE
Term. F
Term. A
Term. B
Term. D
Term. G
Term. H
W
X
Y
0.197 (5)
0.394 (10) 0.295 (7.5)
0.562 (14.3) 0.375 (9.5) 0.394 (10) 0.295 (7.5)
0.613 (15.6) 0.375 (9.5)
0.719 (18.3)
0.562 (14.3)
0.613 (15.6)
0.969 (24.6)
0.590 (15)
0.886 (22.5)
0.969 (24.6)
0.590 (15)
---
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 225P, Orange Drop®, Polyester Film/Foil Capacitors
2
Type 225P Standard Sizes/Ratings
Value, µF Part Number1 L MAX T MAX
H MAX
Part Number1
Value, µF
L
MAX
T
MAX
HMAX
100 VDC
200 VDC
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
225P10291W
225P12291W
225P15291 W
225P18291 W
225P22291 W
225P27291 W
.70 (17.8)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6,4)
.25 (6.4)
225P10292X
225P12292X
225P15292X
225P18292X
225P22292X
225P27292X
225P33292X
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6,4)
.001
.35 (8.9)
.35 (8.9)
.35 (8.9)
.35 (8.9)
.35 (8.9)
.35 (8.9)
.001
.55 (14.0)
.55 (14.0)
.55 (14.0)
.55 (14.0)
.55 (14.0)
.55 (14.0)
.55 (14.0)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.0012
.0015
.0018
.0022
.0027
.0033
.0012
.0015
.0018
.0022
.0027
.70 (17.8)
.70 (17.8 )
.70 (17,8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
225P33291 W
225P39291W
225P47291W
225P56291W
225P68291W
225P82291 W
.0033
.0039
.0047
.0056
.0068
.0082
.35 (8.9)
.35 (8.9)
.35 (8.9)
.35 (8.9)
.35 (8.9)
.35 (8.9)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
225P39292X
225P47292X
225P56292X
225P68292X
225P82292X
225P10392X
225P12392X
.0039
.0047
.0056
.0068
.0082
.01
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.55 (14.0)
.55 (14.0)
.58 (14.7)
.58 (14.7)
.58 (14.7)
.58 (14.7)
.58 (14.7)
.70 (17.8)
.70 (17.8)
.70 (17.8 )
.70 (17.8)
.70 (17.8)
.70 (17.8)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.27 (6.9)
.012
.01
225P10391W
225P12391 W
225P15391 W
225P18391 W
225P22391W
22SP27391W
.35 (8.9)
.35 (8.9)
.35 (8.9)
.35 (8.9)
.35 (8.9)
.37 (9.4)
.012
.015
.018
.022
.027
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.28 (7.1)
.28 (7.1)
.28 (7.1)
.28 (7.1)
225P15392 X
225P18392X
225P22392X
225P27392X
225P33392X
225P39392X
225P47392X
.015
.018
.022
.027
.033
.039
.047
.58 (14.7)
.58 (14.7)
.58 (14.7)
.61 (15.5)
.61 (15.5)
.61 (15.5)
.61 (15.5)
225P33391 W
225P39391 W
225P47391 W
225P56391 W
225P68391 W
225P82391W
225P10491W
.033
.039
.047
.056
.068
.082
.1
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.70 (17.8)
.27 (6,9)
.30 (7.6)
.30 (7.6)
.34 (8.6)
.34 (8.6)
.40 (10.2)
.40 (10.2)
.37 (9.4)
.42 (10.7)
.42 (10.7)
.49 (12.4)
.49 (12.4)
.55 (14.0)
.55 (14.0)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
225P56392X
225P68392X
225P82392X
225P10492X
225P12492X
225P15492X
225P18492X
225P22492X
.31 (7.9)
.31 (7,9)
.34 (8.6)
.37 (9.4)
.39 (9.9)
.41 (10.4)
.46 (11.7)
.48 (12.2)
.056
.068
.082
.1
.12
.15
.64 (16.3)
.64 (16.3)
.67 (17.0)
.71 (18.0)
.72 (18.3)
.74 (18.8)
.75 (19.1)
.77 (19.6)
225P12491X
225P15491X
225P18491X
225P22491X
225P27491 X
225P33491 X
225P39491X
225P47491X
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.37 (9.4)
.12
.15
.18
.22
.27
.33
.39
.47
.57 (14.5)
.62 (15.7)
.66 (16.8)
.70 (17.8)
.74 (18.8)
.77 (19.6)
.81 (20.6)
.86 (21.8)
.40 (10.2)
.43 (10.9)
.46 (11.7)
.49 (12.4)
.52 (13.2)
.55 (14.0)
.60 (15.2)
.18
.22
.27
.33
.39
.47
.56
.68
225P27492Y
225P33492Y
225P39492Y
225P47492Y
225P56492Y
225P68492Y
1.25 (31.8) .39 (9.9)
.71 (18.0)
.71 (18.0)
.77 (19.6)
.83 (21.1)
.99 (25.1)
1.14 (29.0)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
.41 (10.4)
.45 (11.4)
.50 (12.7)
.67 (17.0)
.84 (21.3)
225P56491Y
225P68491Y
225P82491 Y
225P10591Y
1.25 (31.8) .55 (14.0)
.88 (22.4)
.90 (22.9)
.94 (23.9)
.56
.68
.82
1.0
.58 (14.7)
1.25 (31.8) .65 (16.5)
1.25 (31.8)
1.25 (31.8) .72 (18.3) .98 (24.9)
1
To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page.
2 Shaded part numbers, when ordered as ±10% tolerance with the D3 terminal style and lead length, are Standard Stock items available
through the CDE Distribution Network. For complete part number please add the D3 suffix to the above part numbers in
accordance with the Ordering Information (i.e. 225P10491WD3). Other part numbers are available on special order.
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 225P, Orange Drop®, Polyester Film/Foil Capacitors
Type 225P Standard Sizes/Ratings2
Value, µF Part Number1
L MAX
T MAX
H MAX
Value, µF Part Number1
L MAX
T MAX
H MAX
400 VDC
600 VDC
.001
225P10294X
.80 (20.3 )
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6,4)
.55 (14.0)
.55 (14.0)
.55 (14.0)
.55 (14.0)
.55(14.0 )
.55(14.0)
.55(14.0 )
.55(14.0)
.55(14.0 )
225P10296X
225P12296X
225P15296X
225P18296X
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.001
225P12294X
225P15294X
225P18294X
225P22294X
.0012
.0015
.0018
.0022
.0012
.0015
.0018
.55 (14.0)
.55 (14.0)
.55 (14.0)
.55 (14.0)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.0022
.0027
.0033
.0039
225P22296X
225P27296X
225P33296X
225P39296X
.0027
.0033
.0039
.0047
.0056
225P27294X
225P33294X
225P39294X
225P47294X
225P56294X
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25(6.4 )
.25 (6.4)
.55(14.0)
.55(14.0 )
.55(14.0)
.55 (14.0)
.58(14.7)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.31 (7.9)
.58 (14.7)
.58 (14.7)
.58 (14.7)
.64 (16.3)
.0047
.0056
.0068
.0082
225P47296X
225P56296X
225P68296X
225P82296X
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.25 (6.4)
.28 (7.1)
.0068
.0082
.01
.012
.015
225P68294X
225P82294X
225P10394X
225P12394X
225P15394 X
.58(14.7 )
.58(14.7)
.58 (14.7)
.58 (14.7)
.58(14.7 )
.64 (16.3)
.67 (17.0)
.67 (17.0)
.74 (18.8)
225P10396X
225P12396X
225P15396X
225P18396X
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.31 (7.9)
.34 (8.6)
.34 (8.6)
.37 (9.4)
.01
.012
.015
.018
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.31 (7.9)
.31 (7.9)
.34 (8.6)
.34 (8.6)
.41 (10.4)
.018
.022
.027
.033
.039
225P18394X
225P22394X
225P27394X
225P33394X
225P39394X
.58 (14.7)
.58(14.7 )
.65(16.5)
.65(16.5 )
.65(16.5)
.74 (18.8)
.77 (19.6)
.44 (11.2) .77 (19.6)
.50 (12.7) .83 (21.1)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.37 (9.4)
.44 (11.2)
225P22396X
225P27396X
225P33396X
225P39396X
225P47396X
.022
.027
.033
.039
.047
.83 (21.1)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.80 (20.3)
.50 (12.7)
.047
.056
.068
.082
.1
225P47394X
225P56394X
225P68394X
225P82394X
225P10494X
.41 (10.4)
.47(11.9)
.47(11.9 )
.50 (12.7)
.65(16.5 )
.80 (20.3)
.80 (20.3)
.82 (20.8)
1.25(31.8) .47 (11.9) .82 (20.8)
225P56396Y
225P68396Y
225P82396Y
225P10496Y
.056
.068
.082
.1
.82 (20.8)
.88 (22.4)
.56 (14.2) .91 (23.1)
1.25(31.8) .47 (11.9)
1.25(31.8) .53 (13.5)
1.25(31.8)
.52(13.2 ) .84(21.3 )
1.25(31.8 )
1.25(31.8 ) .47(11.9 )
1.25(31.8)
1.25(31.8 )
.12
.15
.18
.22
225P12494Y
225P15494Y
225P18494Y
225P22494Y
.44(11.2) .77(19.6)
.92 (23.4)
.62 (15.7) .94 (23.9)
1.25(31.8) .60 (15.2)
1.25(31.8)
1.25(31.8) .70 (17.8)
1.25(31.8) .76 (19.3)
.80 (20.3)
.52(13.2) .84(21.3)
.56(14.2 ) .89 (22.6)
225P12496Y
225P15496Y
225P18496Y
225P22496Y
.12
.15
.18
.22
1.02 (25.9)
1.10 (27.9)
1.25(31.8 )
1.25(31.8 )
1.25(31.8)
1.25(31.8 )
.27
.33
.39
.47
225P27494Y
225P33494Y
225P39494Y
225P47494Y
.69 (17.5)
.72 (18.3)
.75(19.1) 1.10(27.9)
.84(21.3 ) 1.14(29.0 )
.91 (23.1)
.99 (25.1)
To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page.
2 Shaded part numbers, when ordered as ±10% tolerance with the D3 terminal style and lead length, are Standard Stock items available
through the CDE Distribution Network. For complete part number please add the D3 suffix to the above part numbers in
accordance with the Ordering Information (i.e. 225P10491WD3). Other part numbers are available on special order.
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 225P, Orange Drop®, Polyester Film/Foil Capacitors
dV/dt Specifications
Maximum Pulse Rise Time (dV/dt) in Volts/µsec
Cap
Value (µF)
400V
600V
100V
200V
23300
21300
19000
17400
15700
14200
12800
11800
10700
9800
8900
8100
7400
6700
6000
5500
5000
4500
4100
3700
3400
3100
2800
2300
2100
1900
12200
11100
9900
9100
8200
7400
6700
6200
5600
5100
4700
4200
3800
3500
3100
2900
2600
2300
2100
1900
1800
1600
1500
1300
1200
1000
900
14800
13500
12100
11100
10000
9000
8200
7500
6800
6300
5700
5200
4700
4300
3800
3500
3200
2900
2600
2400
2200
2000
1800
1600
21000
19100
17100
15600
14100
12800
11500
10600
9700
8900
8000
7300
6600
6100
5400
4900
4500
4000
3700
3400
3100
2800
2500
2300
2100
1900
1500
1400
1300
1200
.001
.0012
.0015
.0018
.0022
.0027
.0033
.0039
.0047
.0056
.0068
.0082
.01
.012
.015
.018
.022
.027
.033
.039
.047
.056
.068
.082
.1
1500
1400
1200
.12
.15
.18
.22
.27
.33
.39
.47
1700
1600
1400
800
700
700
600
600
500
400
400
1000
800
700
700
600
600
500
1000
1000
900
.56
.68
.82
1.0
400
300
Note: dV/dt ratings based on measurements made at the
junction of the wire leads and capacitor body.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Notice and Disclaimer: All product drawings, descriptions, specifcations, statements, inꢀormation and
data (collectively, the “Inꢀormation”) in this datasheet or other publication are subject to change. The
customer is responsible ꢀor checking, confrming and veriꢀying the extent to which the Inꢀormation con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Inꢀormation given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility oꢀ any kind, expressed or implied. Statements oꢀ suitability
ꢀor certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has oꢀ operating conditions that such Cornell Dubilier company regards
as typical ꢀor such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specifcally and expressly disclaims any guarantee,
warranty or representation concerning the suitability ꢀor a specifc customer application, use, storage,
transportation, or operating environment. The Inꢀormation is intended ꢀor use only by customers who
have the requisite experience and capability to determine the correct products ꢀor their application. Any
technical advice inꢀerred ꢀrom this Inꢀormation or otherwise provided by Cornell Dubilier with reꢀerence
to the use oꢀ any Cornell Dubilier products is given gratis (unless otherwise specifed by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability ꢀor the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and saꢀety standards regarding the design
and manuꢀacturing oꢀ its products, in light oꢀ the current state oꢀ the art, isolated component ꢀailures may
still occur. Accordingly, customer applications which require a high degree oꢀ reliability or saꢀety should
employ suitable designs or other saꢀeguards (such as installation oꢀ protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the ꢀailure oꢀ an electrical component
does not result in a risk oꢀ personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all saꢀety measures are indi-
cated in such warnings, cautions and notes, or that other saꢀety measures may not be required.
4
相关型号:
225PHB250K2G
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
225PHB250K2H
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
225PHB330K2H
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
225PHB400K2H
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
225PHB600K2H
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
225PHB600K4H
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
225PHB700K2J
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
225PHB700K4J
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
225PHB850K2J
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
225PHB850K4J
Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded
ILLINOISCAPAC
©2020 ICPDF网 联系我们和版权申明