725M62492RA1 [CDE]
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED;型号: | 725M62492RA1 |
厂家: | CORNELL DUBILIER ELECTRONICS |
描述: | Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED 电容器 |
文件: | 总8页 (文件大小:197K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Type 725M, Orange Drop®, Metallized Polypropylene Film Capacitors
Type 725M Orange Drop®
Metallized Polypropylene
Film Capacitors
Features
• Radial-lead
• Pressed profile, compact size
• Non-inductively wound
• Very low ESR/ESL
Corona Start Voltage (typical):
160 VDC units: 250 Volts RMS
250 VDC units: 275 Volts RMS
400 VDC units: 300 Volts RMS
630 VDC units: 325 Volts RMS
• Self-healing properties
Specifications
Insulation Resistance:
Capacitance Range:
At +25°C: 200,000 Mꢀ for C ꢁ 0.5 µF
100,000 Mꢀ-µF for C > 0.5 µF
At +85°C: 10,000 Mꢀ for C ꢁ 0.5 µF
5,000 Mꢀ-µF forC >0.5 µF
.01 to4.7µF
Capacitance Tolerance:
±5%, ±10%
(other tolerances available upon request)
Pulse Rise Time (dV/dt):
See standard ratings table. dV/dt
rating is in Volts/µsec.
Voltage Ratings:
160 to 630 Volts D-C
100 to 250 Volts A-C
Encapsulation:
Conformal coating oforange, flame
retardant epoxy. Meets UL94V-0
specifications.
Operating Temperature Range:
-55°C to +85°C (at full voltage)
Voltage Derating:
LeadWire:
At +105°C, 50% of +85°C rating.
Tinned copper-clad steel,
.032 (0.8) diameter, #20 AWG.
Dissipation Factor:
0.1% Maximum @ 1 KHz, +25°C
Dielectric/Construction:
(contact us for additional details on specific
capacitance and voltage ratings.)
Metallized Polypropylene film, single
section design. Non-inductively wound.
Dimensions in inches, metric (mm) in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 725M, Orange Drop®, Metallized Polypropylene Film Capacitors
Ordering/Part Number Information
725M 334
9
2
J
B
3
(XXXX)
A suffix may be added by the
factory to denote special construction.
Lead Length 1 = 0.187 (4.7) ± 0.030 (0.8)
2 = 0.250 (6.4) ± 0.030 (0.8)
3 = 1.250 (32) Minimum
Custom lead lengths available upon request.
Terminal A = Straight Lead
B,F = Hairpin Crimp
G = Hockey Stick Crimp
Case Code See Standard Sizes/Ratings Table
D-C Voltage Rating 1 = 160 VDC
2 = 250 VDC
4 = 400 VDC
6 = 630 VDC
Capacitance Tolerance 9 = ±10%; 5 = ±5%
Capacitance Expressed in Picofarads. The first two digits are the significant figures,
the third is the number of zeros following. (i.e. 334 = 330000 pF = .33 µF)
CDE Type Number Identifies the basic capacitor design.
Standard Marking Format
Tolerance codes
per EIA Standards
Sample Marking
Description
on unit
CDE - CDE Electronics identification
CDE725M250V
334K 9910
Type number
725M -
250V-
J
±5%
D-C Voltage rating, Volts
Capacitance and tolerance code
Weekly date code
-
K
±10%
334K -
9910
(i.e. 10th week of 1999)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 725M, Orange Drop®, Metallized Polypropylene Film Capacitors
Standard Lead Styles
TERMINAL G
TERMINAL B,F
TERMINAL A
Standard Lead Spacings
CASE
CODE
Term. F
Term. G
Term. A
Term. B
0.197 (5.0)
0.295 (7.5)
0.394 (10.0)
0.590 (15.0)
N
J
R
L
0.295 (7.5)
0.394 (10.0)
0.590 (15.0)
0.886 (22.5)
0.394 (10.0)
0.590 (15.0)
0.886 (22.5)
1.083 (27.5)
0.394 (10.0)
0.590 (15.0)
0.886 (22.5)
1.083 (27.5)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 725M, Orange Drop®, Metallized Polypropylene Film Capacitors
Type 725M Standard Sizes/Ratings
Value
(µF)
Value
(µF)
dV/dt
Volts/µsec
dV/dt
Volts/µsec
Part Number1
L
M A X
T
M A X
H
M A X
Part Number1
L
M A X
TM A X
H
MAX
160 VDC / 100 VAC*
250 VDC / 160 VAC*
55
64
73
79
.52 (13.2)
.52 (13.2)
.52 (13.2)
.35 (8.9)
.21 (5.3) .38 (9.7)
.39 (9.9)
.52 (13.2)
.52 (13.2) .26 (6.6)
.39 (9.9)
0.056 725M56392N
0.062 725M62392N
0.068 725M68392N
.21 (5.3)
0.1
725M10491N
725M12491N
725M15491N
725M18491N
.21 (5.3)
54
61
.43 (10.9)
.49 (12.4)
.51 (13.0)
0.12
0.15
0.18
.22 (5.6)
.52 (13.2)
.52 (13.2)
.22 (5.9)
.24 (6.1)
68
73
77
83
88
95
0.075 725M75392N .52 (13.2) .21 (5.3) .42 (10.7)
0.082 725M82392N .52 (13.2) .22 (5.6)
.43 (10.9)
.44 (11.2)
.45 (11.4)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.46 (11.7)
.48 (12.2)
.48 (12.2)
.49 (12.4)
.50 (12.7)
.52 (13.2)
.54 (13.7)
.55 (14.0)
.56 (14.2)
.57 (14.5)
.59 (15.0)
30
33
35
37
38
41
42
43
44
45
46
47
0.09
0.1
725M90392N .52 (13.2) .23 (5.8)
725M10492N .52 (13.2) .24 (6.1)
0.22
0.25
0.27
0.3
0.33
0.39
0.43
0.47
0.5
725M22491J
725M25491J
725M27491J
725M30491J
725M33491J
725M39491J
725M43491J
725M47491J
725M50491J
725M56491J
725M62491J
725M68491J
.20 (5.1)
.21 (5.3)
.21 (5.3)
.22 (5.6)
.23 (5.8)
.25 (6.4)
.26 (6.6)
.28 (7.1)
.28 (7.1)
.30 (7.6)
.32(8.1)
0.12
0.15
.26 (6.6) .47 (11.9)
.50 (12.7)
725M12492N
.52 (13.2)
725M15492N .52 (13.2) .29 (7.4)
103
.48 (12.2)
.73 (18.5) .23 (5.8) .50 (12.7)
0.18
0.22
0.25
0.27
0.3
0.33
0.39
0.43
725M18492J
725M22492J
725M25492J
725M27492J
725M30492J
725M33492J
725M39492J
725M43492J
.73 (18.5) .21 (5.3)
42
46
48
50
51
53
55
56
.25 (6.4) .52 (13.2)
.26 (6.6) .53 (13.5)
.54 (13.7)
.28 (7.1) .55 (14.0)
.73 (18.5)
.73 (18.5)
.73 (18.5) .27 (6.9)
.73 (18.5)
.73 (18.5)
.73 (18.5) .32 (8.1)
0.56
0.62
0.68
.58 (14.7)
.60 (15.2)
.31 (7.9)
.33 (8.4) .60 (15.2)
.54 (13.7)
25
26
27
27
28
29
30
30
30
1.03 (26.2) .27 (6.9)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2) .31 (7.9)
1.03 (26.2) .34 (8.6)
0.75
0.82
0.9
1.0
1.2
1.5
1.8
2.0
2.2
725M75491R
725M82491R
725M90491R
725M10591R
725M12591R
725M15591R
725M18591R
725M20591R
725M22591R
.26 (6.6) .53 (13.5)
0.47
0.5
725M47492R
725N50492R
725M56492R
1.03 (26.2)
1.03 (26.2)
1.03 (26.2) .28 (7.1)
.28 (7.1) .55 (14.0)
.29 (7.4) .57 (14.5)
30
30
31
32
33
33
34
34
35
36
.54 (13.7)
.56 (14.2)
.57 (14.5)
.27 (6.9)
.58 (14.7)
.61 (15.5)
.65 (16.5)
.69 (17.5)
.72 (18.3)
.78 (19.8)
0.56
0.62
0.68
0.75
0.82
0.9
725M62492R 1.03 (26.2) .30 (7.6)
.29 (7.4) .63 (16.0)
725M68492R
725M75492R
725M82492R
725M90492R
725M10592R
725M12592R
1.03 (26.2)
.38 (9.7)
1.03 (26.2)
1.03 (26.2) .42 (10.7)
1.03 (26.2)
.64 (16.3)
.66 (16.8)
.67 (17.0)
1.03 (26.2) .31 (7.9)
1.03 (26.2) .32 (8.1)
1.03 (26.2) .34 (8.6)
.44 (11.2)
1.03 (26.2) .44 (11.2)
1.03 (26.2) .36 (9.1) .69 (17.5)
.73 (18.5)
1.0
1.2
24
24
24
24
24
24
25
25
1.03 (26.2) .39 (9.9)
.71 (18.0)
.73 (18.5)
.76 (19.3)
.78 (19.8)
.81 (21.6)
.87 (22.1)
.90(22.9)
.92 (23.4)
1.23 (31.2) .44 (11.2)
1.23 (31.2) .46 (11.7)
2.5
2.7
3.0
3.3
3.6
3.9
4.3
4.7
725M25591L
725M27591L
725M30591L
725M33591L
725M36591L
725M39591L
725M43591L
725M47591L
.73 (18.5)
1.23 (31.2) .39 (9.9)
1.5
1.8
2.0
2.2
2.5
2.7
3.0
3.3
725M15592L
725M18592L
725M20592L
725M22592L
725M25592L
725M27592L
725M30592L
725M33592L
28
29
29
29
29
29
30
30
1.23 (31.2)
1.23 (31.2)
1.23 (31.2)
.48 (12.2)
.51 (13.0)
.53 (13.5)
1.23 (31.2) .43 (10.9) .77 (19.6)
1.23 (31.2) .45 (11.4) .79 (20.1)
.82 (20.8)
.85 (21.6)
.88 (22.4)
.91 (23.1)
.94 (23.9)
1.23 (31.2) .48 (12.2)
1.23 (31.2) .52 (13.2)
1.23 (31.2) .55 (14.0)
1.23 (31.2) .58 (14.7)
1.23 (31.2)
1.23 (31.2)
1.23 (31.2)
1.23 (31.2)
.51 (13.0)
.53 (13.5)
.57 (14.5)
.60 (15.2)
* 60 Hz., RMS
1
To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 725M, Orange Drop®, Metallized Polypropylene Film Capacitors
Type 725M Standard Sizes/Ratings
Value
(µF) Part Number1
Value
dV/dt
dV/dt
1
Volts/µsec
L
M A X
T
M A X
HMAX
Part
LMAX
Number
H
MAX
Volts/µsec
T
MAX
(µF)
400 VDC / 220 VAC*
630 VDC / 250 VAC*
0.027 725M27394N
.52 (13.2)
.36 (9.1)
.21 (5.3) .42 (10.7)
.21 (5.3)
90
0.01
.52 (13.2) .21 (5.3)
161
196
232
256
279
291
297
312
322
328
332
335
340
344
725M10396N
725M12396N
725M15396N
725M18396N
725M22396N
725M25396N
725M27396N
725M33396N
725M39396N
725M43396N
725M47396N
725M50396N
725M56396N
725M62396N
.35 (8.9)
725M33394N .52 (13.2)
0.033
110
124
132
138
142
149
155
159
164
166
171
0.012
0.015
0.018
0.022
0.025
0.027
0.033
0.039
0.043
0.047
0.05
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.23 (5.8) .37 (9.4)
.52 (13.2)
.52 (13.2)
.52 (13.2)
0.039 725M39394N
0.043 725M43394N
0.047 725M47394N
.43 (10.9)
.44 (11.2)
.45 (11.4)
.23 (5.8)
.24 (6.1)
.24 (6.1)
.23 (5.8)
.25 (6.4)
.27 (6.9)
.29 (7.4) .49 (12.4)
.27 (6.9)
.43 (10.9)
.45 (11.4)
.48 (12.2)
0.05
725M50394N
.52 (13.2) .25 (6.4) .46 (11.7)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
.52 (13.2)
0.056 725M56394N
0.062 725M62394N
.27 (6.9) .47(11.9)
.55 (14.0)
.49 (12.4)
.54 (13.7)
.28 (7.1)
.27 (6.9)
.30 (7.6) .58 (14.7)
.33 (8.4) .60 (15.2)
.35 (8.9) .62 (15.7)
.36 (9.1) .64 (16.3)
.37 (9.4)
.40 (10.2) .67 (17.0)
.42 (10.7) .69 (17.5)
0.068
0.075
0.082
0.09
725M68394N
725M75394N
725M82394N
725M90394N
.28 (7.1) .55 (14.0)
.57(14.5)
.29 (7.4)
.52 (13.2) .31 (7.9) .58 (14.7)
.65 (16.1)
0.056
0.062
725M10494J
725M12494J
725M15494J
725M18494J
725M22494J
725M25494J
725M27494J
725M30494J
.49 (12.4)
.51 (13.0)
0.1
.73 (18.5) .22 (5.6)
.73 (18.5)
.73 (18.5) .27 (6.9) .54 (13.7)
.73 (18.5)
.73 (18.5) .32 (8.1)
.73 (18.5)
.73 (18.5)
.73 (18.5)
61
66
72
75
78
80
81
82
0.12
0.15
0.18
0.22
0.25
0.27
0.3
.24 (6.1)
0.068
0.075 725M75396J
0.082 725M82396J
0.09
0.1
0.12
0.15
.73 (18.5)
115
118
120
123
125
129
133
725M68396J
.27 (6.9) .54 (13.7)
.56 (14.2)
.60 (15.2)
.62 (15.7)
.63 (16.0)
.65 (16.5)
.73 (18.5) .28 (7.1) .56 (14.2)
.29 (7.4)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.73 (18.5)
.30 (7.6) .57 (14.5)
.31 (7.9)
.33 (8.4)
.36 (9.1) .63 (16.0)
.40 (10.2) .68 (17.3)
.34 (8.6)
.36 (9.1)
.38 (9.7)
725M90396J
725M10496J
725M12496J
725M15496J
.58 (14.7)
.60 (15.2)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2)
1.03 (26.2)
.57 (14.5)
.60 (15.2)
.62 (15.7)
.63 (16.0)
.64 (16.3)
.67 (17.0)
.69 (17.5)
.75(19.1)
.77 (19.6)
.79 (20.1)
.81 (20.6)
0.33
0.39
0.43
0.47
0.5
0.56
0.62
0.68
0.75
0.82
0.9
725M33494R
725M39494R
725M43494R
725M47494R
725M50494R
725M56494R
725M62494R
725M68494R
725M75494R
725M82494R
725M90494R
43
45
46
46
47
48
48
48
49
49
50
.30 (7.6)
.33 (8.4)
.34 (8.6)
.36 (9.1)
.37 (9.4)
.39 (9.9)
.41 (10.4)
.41 (10.4)
.43 (10.9)
.45 (11.4)
.47 (11.9)
0.18
0.22
0.25
0.27
0.3
0.33
0.39
0.43
0.47
0.5
68
70
72
72
73
74
75
75
76
76
725M18496R 1.03 (26.2) .33 (8.4) .60 (15.2)
725M22496R 1.03 (26.2) .34 (8.6) .67 (17.0)
725M25496R 1.03 (26.2)
.36 (9.1) .70 (17.8)
.38 (9.7)
725M27496R
1.03 (26.2)
.71 (18.0)
725M30496R 1.03 (26.2) .40 (10.2) .74 (18.8)
725M33496R 1.03 (26.2) .42 (10.7) .76 (19.3)
725M39496R 1.03 (26.2) .46 (11.7)
725M43496R 1.03 (26.2) .48 (12.2)
.80 (20.3)
.82 (20.8)
725M47496R 1.03 (26.2)
.51 (13.0) .85 (21.6)
725M50496R 1.03 (26.2) .52 (13.2) .87 (22.1)
725M105941
725M12594L
725M15594L
1.23 (31.2)
1.23 (31.2)
1.23 (31.2)
.78 (19.8)
.82 (20.8)
.89 (22.6)
0.56
0.62
0.68
0.75
1.23 (31.2) .48 (12.2)
58
58
59
59
1.0
1.2
1.5
38
39
39
725M56496L
725M62496L
725M68496L
725M75496L
.82 (20.8)
.44 (11.2)
.48 (12.2)
.54 (13.7)
1.23 (31.2)
.51 (13.0) .85 (21.6)
1.23 (31.2) .54 (13.7) .88 (22.4)
1.23 (31.2) .57 (14.5) .91 (23.1)
* 60 Hz., RMS
1
To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 725M, Orange Drop®, Metallized Polypropylene Film Capacitors
RMS Voltage vs. Frequency
@ +85°C, in still air
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 725M, Orange Drop®, Metallized Polypropylene Film Capacitors
RMSVoltagevs. Frequency @ +85°C, in still air
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type 725M, Orange Drop®, Metallized Polypropylene Film Capacitors
General Specifications
The Type 725M Orange Drop® is designed and manufactured for operation in a wide range of demanding envi-
ronments and applications. Type 725M capacitors are wound from the most reliable metallized polypropylene
film available and are protected by a rugged conformal coating of orange epoxy. They may be operated up to
+105°C with proper derating.
The 725M series is an ideal choice for a variety of commercial and industrial electronic applications, from
power supplies and amplifiers, to inverters and lighting ballasts. The 725M series is constructed of the highest
quality polypropylene film with a vacuum deposited metal electrode. Metallized film offers specific clearing/
self-healing characteristics that remove a fault or short in the dielectric film by vaporizing the metal electrode
surrounding the defect and isolating the area.
Operating Temperature Range:
DC Voltage Life Test:
The standard operating temperature range for
polypropylene film is -55°C to +85°C. The 725M
may be operated at full voltage within this
temperature range.
500 hours at +85°C at 125% of rated voltage. After
test; capacitance shall not have changed by more
than ±5% of initial value, insulation resistance shall
not have decreased by more than 50% of initial
requirement and dissipation factor shall not have
increased to more than 0.1%. In addition, there should
be no open or short circuits, and no sign of visible
damage.
The 725M may be operated up to +105°C
provided the DC working voltage is reduced
to 50% of the +85°C rating (full rating).
For more specific details regarding operation
above +85°C please contact our application
engineering department.
AC Voltage Life Test:
Minimum of 500 hours at +85°C at 60 Hz. AC test
voltage applied at 110% of AC rating. After test,
capacitance shall not have changed by more than 3%,
insulation resistance shall not have decreased by
more than 50% of initial requirement, and dissipation
factor shall not have changed by more than 0.03%.
Measurements made at 1 KHz.
The maximum operating temperature for the
725M series is +105°C.
Dielectric Withstanding Voltage:
Units shall withstand a DC potential of 150%
of rated voltage applied between terminals for
not more than 2 minutes.
Additional Notes:
While it is not possible to list every detail of testing
that we perform or every combination of capacitance
value, tolerance, etc. that is available, we strongly
encourage you to please contact us with your specific
requirements. Thank you.
AC Voltage Applications:
The A-C component of the 725M's voltage rating
has been specified to assure that corona will not
be encountered when the capacitor is operated
within the noted specifications. We encourage
you to contact us if you have any concerns about
operating voltage, temperature limits, etc.
Lead Bend Test:
After 3 consecutive 180° bends. No damage.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
相关型号:
725M62492RA2
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62492RB1
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62492RF1
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62492RF2
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62492RF3
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62492RG2
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62492RG3
Film Capacitor, Polypropylene, 250V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62494RA2
Film Capacitor, Polypropylene, 400V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62494RB1
Film Capacitor, Polypropylene, 400V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62494RB2
Film Capacitor, Polypropylene, 400V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
725M62494RB3
Film Capacitor, Polypropylene, 400V, 10% +Tol, 10% -Tol, 0.62uF, Through Hole Mount, RADIAL LEADED
CDE
©2020 ICPDF网 联系我们和版权申明