CDLC351K2R7SR [CDE]
CAP 350F -5% +10% 2.7V T/H;
| 型号： | CDLC351K2R7SR |
| 厂家： | 
CORNELL DUBILIER ELECTRONICS |
| 描述： | CAP 350F -5% +10% 2.7V T/H |
| 文件： | 总3页 (文件大小：584K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Type CDLC Snap-In, Carboncap Power Ultracapacitors
Larg
These low RC time constant, organic electrolyte, large cell
ultracapacitors easily handle more than a half million duty cycles and
solder readily onto circuit boards using snap-in terminals. They are
especially suited for back-up and pulse power applications such as
grid stabilization and wind turbine pitch control. Snap mount cells
are ideal for portable devices, hybrid energy storage, and emergency
lighting.
Highlights
- Board Mountable
- Solderable
Spe
Operating Temperature Range
Storage Temperature Range
–40 ⁰C to +65 ⁰C
–40 ⁰C to +70 ⁰C
Rated Voltage Range
Capacitance Range
2.7 Vdc, 2.85 Vdc rated surge
100 F to 600 F
Capacitance Tolerance
–5% / +10%
Life at Room Temperature
10 years at rated voltge and 25 ºC
Capacitance chge ≤20%
ESR change ≤00%
Life Test
1000 h @ rated ltagand +65 ºC
Capacitance chae ≤20% derease from min. initial value
ESR change ≤100% creasfrom max. initial value
Cycle Test
Shelf Life
1,00000 cycles (rated to half rated voltage at +25 ºC)
Capaance chang≤20%
SR chae ≤100%
withovoltage at +70 ºC
tance change ≤20% from min. initial capacitance
ange ≤100% from max. initial ESR
liant
Ratings
Part Number
CDL01K2R7SR
CDLC351K2R7SR
CDLC401K2R7SR
CDLC601K2R7SR
Terminal Co
Snap In
100
Snap In
350
Snap In
Snap In
Capacita
(Discharge w constant
400
600
), Max
4.2
95
3.2
3.2
3.2
ak (A)
(1 s disof rated Voltage)
223
237
277
LmA), Max
t +25 °C
0.27
10.2
1
1.2
3.6
1.5
2.9
Usable Power Density, Pd (kW/kg)
(Per IEC 62391-2)
4.1
Usable Power (W)
208
21.7
5.1
273
8.6
5.4
273
7.4
5.3
273
5.9
6.3
Impedance match power, (kW/kg)
Gravimetric energy density, Emax (Wh/kg)
Energy available (Wh)
(At rated voltage)
0.1
0.02
13
0.35
0.066
24
0.41
0.077
24
0.61
0.096
28
Weight (kg)
Maximum Continuous Current (Arms)
(ΔT=20°C)
Short circuit current (A)
643
844
844
844
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Type CDLC Snap-In, Carboncap Power Ultracapacitors
Large Cylindrical Type
Part Numbering System
CDLC
101
K
2R7
SR
Type
Capacitance
(F)
Tolerance
(%)
Voltage
(V)
Configuration
SR = snap-in, 2 pins
CDLC - Carbon Double Layer
101=100
K= -5 /+10%
2R7 = 2.7
Cell
Outline Drawing and Dimensions
2 X
2.0 ±0.1
NEGATIVE
TERMINAL
10.0 ±0.1
10.0
±1.0
L
D
PC BOARD MOUNTING HOLES
Dimensions (mm)
Snap-In Type
Part Number
D (+1/-0 mm)
L ( 2 mm)
CDLC101K2R7SR
CDLC351K2R7SR
CDLC401K2R7SR
CDLC601K2R7SR
22
35
35
35
45
59
69
89
Do not reverse polarity.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, confirming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
hereinisbelievedtobeaccurateandreliable,butitispresentedwithoutanyguarantee,warranty,representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specific customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite eperience and capability to
determine the correct products for their application. Any technical advice inferrefrom this Information or
otherwise provided by Cornell Dubilier with reference to the use of any ornell Duilier products is given
gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubiler ssumes no bligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, ilight of the current state
of the art, isolated component failures may still occur. Accordngly, customer applications which require a
high degree of reliability or safety should employ suitable desgns or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate proteive measures) in order to ensure that the
failure of an electrical component does not result in a risk of personl injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions ad notes, or that other safety measures may not be
required.
相关型号：
©2020 ICPDF网 联系我们和版权申明