PFCHT24C2.5S572T [CDE]
Film Capacitor, Polypropylene, 10% +Tol, 0% -Tol, 38.4uF, Stud Mount, CAN;型号: | PFCHT24C2.5S572T |
厂家: | CORNELL DUBILIER ELECTRONICS |
描述: | Film Capacitor, Polypropylene, 10% +Tol, 0% -Tol, 38.4uF, Stud Mount, CAN 电容器 |
文件: | 总4页 (文件大小:210K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Type PFC Power Factor Correction Capacitors
Type PFC capacitors are constructed with low loss self healing
metallized polypropylene, delta connected internally for 3-phase
operation and packaged in a cylindrical metal case with an easy-
access terminals. Type PFC is safety protected with an internal
pressure interrupter that disengages all 3 phases in the event of
capacitor overload or end of life. Type PFC also come equiped with
easy access, easily replaceable discharge resistors.
Highlights
- Automatic PFC equipment
- Wind turbine applications
- Individual and group fixed PFC
- Tuned and detuned capacitor banks
- Power line conditioning
Specifications
Capacitance Tolerance
0 to +10%
Rated Voltage
240 Vac, 480 Vac, 600 Vac
–40 ºC to +55 ºC
0.5 kvar to 30.2 kvar
Operating Temperature Range with Ripple
kvar Range
Maximum Permissible Voltage (Vmax)
110% of rated rms voltage
120% of rated peak voltage (1.2 x √2x Vrms)
Internal Connection
Delta (∆)
Maximum Permissible Current (Imax)
135% of nominal rms current based on rated kvar and rated voltage - (up
to 150% of lR including combined effects of harmonics, over voltages and
capacitances, tolerance)
Life
60,000 h w/94% survival rate
International Standards
FIT (Failure In Time)
Maximum Short Circuit Current
Meets IEEE18, Standard (ANSI/IEEE Standard 18)
≤300 x 109 component h
10 kA (according to UL 810)
Dimensions
Construction Details
Extruded aluminum with
steel or aluminum cover
Case Material
Encapsulation
Environmentally safe
dielectric fluid
Terminal Material
Tin plated copper, brass
or steel
1.75”
0.05”
1.32”
0.05”
Figure 1
Figure 2
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
1
Type PFC Power Factor Correction Capacitors
Part Numbering System
PFC
H
T
480
Voltage
(Vac)
C
6
S
779
T
Type
Base Type
Case Material
kvar
Tolerance
(%)
Can Height
(inches)
Phases
PFC
S = Std.
S = 2”Round
24 = 240
48 = 480
60 = 600
C = Aluminum case
w/steel cover
Full kvar value
including decimals
@ 60 Hz and
S = –0/+10%
Expressed as 3 digit
number of the case height
from base to top of lip
(including seam) rounded
and displayed without
decimal point
T = 3-Phase
H = Harmonic T = 2½”Round
V = 3”Round
M12 Stud
X = 3.5”Round
D = Aluminum case
w/aluminum cover
M12 Stud
Ratings
NOTE: Other ratings, sizes and performance specifications are available. Contact us.
Max Power (W)
Case
60Hz
Output Output
Kvar
50Hz
Capacitance
(µF)
Rs
Rth
CDE
Catalog Number
Diameter
(in)
Height
(in)
SA
(mΩ) (°C/W)
55°C
65°C
70°C
Style
Kvar
(in2)
240 Vac
PFCHS24C0.5S572T
PFCHS24C1S572T
PFCHS24C1.5S572T
PFCHT24C2S572T
0.5
1
0.4
0.8
1.3
1.7
3 x 7.7
3 x 15.4
3 x 23.0
3 x 30.7
5.8
4.2
3.7
3.4
6.6
6.6
6.6
5.1
4.5
4.5
4.5
5.9
3.0
3.0
3.0
3.9
2.3
2.3
2.3
2.9
2.0
2.0
2.0
2.5
5.72
5.72
5.72
5.72
42
42
42
55
1.5
2
Fig. 1
PFCHT24C2.5S572T
PFCHT24C3S572T
PFCHT24C4S778T
PFCHV24D5S842T
PFCHV24D6S842T
PFCHV24D6.3S842T
PFCHV24D7.5S108T
PFCHV24D8.3S108T
PFCHX24D10S108T
PFCHX24D12.5S108T
PFCHX24D15S137T
PFCHX24D16.7S137T
PFCHX24D17.5S137T
2.5
3
2.1
2.5
3 x 38.4
3 x 46.1
3 x 61.4
3 x 76.8
3 x 92.1
3 x 96.7
3 x 115.1
3 x 127.4
3 x 153.5
3 x 191.9
3 x 230.3
3 x 256.4
3 x 268.6
3.2
3.1
4.5
1.8
1.7
1.6
2.2
2.1
2.0
1.8
2.4
2.3
2.2
5.1
5.1
4.0
3.0
3.0
3.0
2.4
2.4
2.0
2.0
1.7
1.7
1.7
5.9
3.9
3.9
2.9
2.9
3.8
5.0
5.0
5.0
6.2
6.2
7.4
7.4
9.1
9.1
9.1
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
3.5
5.72
5.72
55
55
5.9
4
3.3
7.6
5.1
7.78
71
5
4.2
10.0
10.0
10.0
12.4
12.4
14.8
14.8
18.2
18.2
18.2
6.7
8.42
94
6
5.0
6.7
8.42
94
6.3
7.5
8.3
10
12.5
15
16.7
17.5
5.3
6.7
8.42
94
6.3
8.3
10.78
10.78
10.78
10.78
13.73
13.73
13.73
116
116
138
138
170
170
170
6.9
8.3
Fig. 2
8.3
9.8
10.4
12.5
13.9
14.6
9.8
12.2
12.2
12.2
480 Vac
PFCHS48C0.5S572T
PFCHS48C1S572T
PFCHS48C1.5S572T
PFCHS48C2S572T
PFCHS48C2.5S572T
PFCHS48C3S572T
PFCHT48C4S572T
PFCHT48C5S572T
0.5
1
0.4
0.8
1.3
1.7
2.1
2.5
3.3
4.2
3 x 1.9
3 x 3.8
3 x 5.8
3 x 7.7
3 x 9.6
3 x 11.5
3 x 15.4
3 x 19.2
11.3
6.9
5.4
4.7
4.3
4.0
3.6
3.4
6.6
6.6
6.6
6.6
6.6
6.6
5.1
5.1
4.5
4.5
4.5
4.5
4.5
4.5
5.9
5.9
3.0
3.0
3.0
3.0
3.0
3.0
3.9
3.9
2.3
2.3
2.3
2.3
2.3
2.3
2.9
2.9
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
5.72
5.72
5.72
5.72
5.72
5.72
5.72
5.72
42
42
42
42
42
42
55
55
1.5
2
Fig. 1
2.5
3
4
5
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
2
Type PFC Power Factor Correction Capacitors
Max Power (W)
65°C
Case
Height
(in)
60Hz
Output Output
Kvar
50Hz
Capacitance Rs
Rth
CDE
Catalog Number
Diameter
(in)
SA
(µF)
(mΩ) (°C/W)
55°C
70°C
Style
Fig. 1
(in2)
Kvar
480 Vac
5.1
PFCHT48C6S778T
PFCHT48C7.5S778T
PFCHT48C8.3S778T
PFCHV48D9S842T
PFCHV48D10S842T
PFCHV48D12.5S108T
PFCHV48D15S108T
PFCHX48D16.7S108T
PFCHX48D18S108T
PFCHX48D20S108T
PFCHX48D25S137T
PFCHX48D30S137T
6
7.5
8.3
9
5.0
6.3
3 x 23.0
3 x 28.8
3 x 31.9
3 x 34.5
3 x 38.4
3 x 48.0
3 x 57.6
3 x 64.1
3 x 69.1
3 x 76.8
3 x 95.9
3 x 115.1
5.3
4.9
4.8
2.2
2.1
2.8
2.6
2.4
2.3
2.2
2.9
2.7
4.0
4.0
4.0
3.0
3.0
2.4
2.4
2.0
2.0
2.0
1.7
1.7
7.6
3.8
3.8
3.8
5.0
5.0
6.2
6.2
7.4
7.4
7.4
9.1
9.1
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
3.5
7.78
7.78
71
71
7.6
5.1
6.9
7.6
5.1
7.78
71
7.5
10.0
10.0
12.4
12.4
14.8
14.8
14.8
18.2
18.2
6.7
8.42
94
10
8.3
6.7
8.42
94
12.5
15
10.4
12.5
13.9
15.0
16.7
20.8
25.0
8.3
10.78
10.78
10.78
10.78
10.78
13.73
13.73
116
116
138
138
138
170
170
8.3
16.7
18
9.8
Fig. 2
9.8
20
9.8
25
12.2
12.2
30
600Vac
PFCHS60C1S572T
PFCHS60C1.5S572T
PFCHS60C2S572T
1
1.5
2
0.8
1.3
3 x 2.5
3 x 3.7
7.4
5.9
5.1
4.6
4.2
3.8
5.9
5.5
5.5
5.4
5.3
2.6
2.5
2.5
3.6
3.1
3.1
2.9
2.8
2.8
2.6
2.5
3.6
3.4
3.2
6.6
6.6
6.6
6.6
5.1
5.1
4.0
4.0
4.0
4.0
4.0
3.0
3.0
3.0
2.4
2.4
2.4
2.0
2.0
2.0
2.0
2.0
1.7
1.7
1.7
4.5
4.5
3.0
3.0
3.0
3.0
3.9
3.9
5.1
5.1
5.1
5.1
5.1
6.7
6.7
6.7
8.3
8.3
8.3
9.8
9.8
9.8
9.8
9.8
12.2
12.2
12.2
2.3
2.3
2.3
2.3
2.9
2.9
3.8
3.8
3.8
3.8
3.8
5.0
5.0
5.0
6.2
6.2
6.2
7.4
7.4
7.4
7.4
7.4
9.1
9.1
9.1
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5.72
5.72
42
42
1.7
3 x 4.9
4.5
5.72
42
PFCHS60C2.5S572T
PFCHT60C3S572T
2.5
3
2.1
3 x 6.1
4.5
5.72
42
2.5
3 x 7.4
5.9
5.72
55
PFCHT60C4S572T
4
3.3
3 x 9.8
5.9
5.72
55
Fig. 1
PFCHT60C5S778T
5
4.2
3 x 12.3
3 x 14.7
3 x 15.0
3 x 15.5
3 x 16.9
3 x 18.4
3 x 19.9
3 x 20.4
3 x 24.6
3 x 30.0
3 x 30.7
3 x 33.9
3 x 35.9
3 x 36.8
3 x 41.0
3 x 43.0
3 x 49.1
3 x 55.3
3 x 61.4
7.6
7.78
71
PFCHT60C6S778T
6
5.0
7.6
7.78
71
PFCHT60C6.1S778T
PFCHT60C6.3S778T
PFCHT60C6.9S778T
PFCHV60D7.5S842T
PFCHV60D8.1S842T
PFCHV60D8.3S842T
PFCHV60D10S108T
PFCHV60D12.2S108T
PFCHV60D12.5S108T
PFCHX60D13.8S108T
PFCHX60D14.6S108T
PFCHX60D15S108T
PFCHX60D16.7S108T
PFCHX60D17.5S108T
PFCHX60D20S137T
PFCHX60D22.5S137T
PFCHX60D25S137T
6.1
6.3
6.9
7.5
8.1
8.3
10
5.1
7.6
7.78
71
5.3
7.6
7.78
71
5.8
7.6
7.78
71
6.3
10.0
10.0
10.0
12.4
12.4
12.4
14.8
14.8
14.8
14.8
14.8
18.2
18.2
18.2
8.42
94
6.8
8.42
94
6.9
8.42
94
8.3
10.78
10.78
10.78
10.78
10.78
10.78
10.78
10.78
13.73
13.73
13.73
116
116
116
138
138
138
138
138
170
170
170
12.2
12.5
13.8
14.6
15
10.2
10.4
11.5
12.2
12.5
13.9
14.6
16.7
18.8
20.8
Fig. 2
16.7
17.5
20
22.5
25
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
3
Type PFC Power Factor Correction Capacitors
Performance Notes
Rs: Equivalent series resistance – Ohmic resistances (Ohm)
Dielectric Dissipation Factor: tan δ (Polypropylene: 0.0002)
T
hs : Hotspot temperature within the capacitor: Ths = T + (Ptotal · 280 / SA)
a
Ta: Ambient temperature
Rth:Thermal resistance: °C/ Watt, indicates hot spot temperature rise due to power dissipation losses
Pmax: Maximum power dissipation: Pmax = (85 ºC- T ) / Rth (Watts)
a
PTotal: Total Power generated by Dielectric and Ohmic Losses: P= Vpeak . C . TT F .DF(Watts)
given Voltage
given Current
2
.
P = I2 . [Rs (XC DF)] (Watts)
+
.
Where PTotal = PFund + PHarm1 + PHarm2 + .... + PHarm
∞
Design life: 60,000 hours 94% survival Ths:85 °C
Expected lifetime vs. applied voltage and hot spot temperature
1.2
1.15
1.1
85 ºC
80 ºC
70 ºC
60 ºC
1.05
1
0.95
0.9
0.85
0.8
1000
10000
100000
1000000
Expected life time (h)
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data
(collectively, the“Information”) in this datasheet or other publication are subject to change. The customer is responsible
for checking, confirming and verifying the extent to which the Information contained in this datasheet or other
publication is applicable to an order at the time the order is placed. All Information given herein is believed to be
accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind,
expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell
Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell
Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty
or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or
operating environment. The Information is intended for use only by customers who have the requisite experience and
capability to determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless
otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or
results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding
the design and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable
designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective
measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage. Although all product-related warnings, cautions and notes must be observed, the customer should
not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures
may not be required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
4
相关型号:
©2020 ICPDF网 联系我们和版权申明