NX8563LA606-CC [CEL]
NECs DIRECTLY MODULATED InGaAsP MQW-DFB LASER DIODE MODULE FOR 2.5 GB/s, 110 KM AND 240 KM REACH DWDM METRO AND CATV APPLICATIONS; NEC的直接调制的InGaAsP MQW - DFB激光二极管模块2.5 GB /秒， 110公里， 240公里距离DWDM城域和CATV应用
| 型号： | NX8563LA606-CC |
| 厂家： | 
CALIFORNIA EASTERN LABS |
| 描述： | NECs DIRECTLY MODULATED InGaAsP MQW-DFB LASER DIODE MODULE FOR 2.5 GB/s, 110 KM AND 240 KM REACH DWDM METRO AND CATV APPLICATIONS |
| 文件： | 总5页 (文件大小：323K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
NEC's DIRECTLY MODULATED
InGaAsP MQW-DFB
LASER DIODE MODULE
FOR 2.5 GB/s, 110 KM AND 240 KM REACH
DWDM METRO AND CATV APPLICATIONS
NX8563LA
Series
FEATURES
DESCRIPTION
NEC's NX8563LA Series is a 1 550 nm Multiple Quantum
Well (MQW) structured Distributed Feed-Back (DFB) laser
diode module with Single Mode Fiber.
•
•
•
PEAK OUTPUT POWER
Pf = 10 mW MIN.
INTERNAL THERMO-ELECTRIC COOLER AND
ISOLATOR
It is designed as directly modulation light source and
ideal for optical transmission systems. The device is
available for Dense Wavelength Division Multiplexing
(DWDM) wavelengths based on ITU-T recommendations,
enabling a wide range of applications.
HERMETICALLY SEALED 14-PIN BUTTERFLY
PACKAGE
•
•
•
SINGLE MODE FIBER PIGTAIL
WIDE OPERATION TEMPERATURE RANGE
AVAILABLE FOR DWDM WAVELENGTHS BASED ON
ITU-T RECOMMENDATIONS
ELECTRO-OPTICAL CHARACTERISTICS (TLD = TSET, TC = -20 + 85°C)
SYMBOL
PARAMETER AND CONDITIONS
UNIT
MIN
TYP
MAX
Tset
VF
Laser Set Temperature
°C
V
30
45
2.0
40
Forward Voltage, Pf = 10 mW
0.9
Ith
Threshold Current
mA
mW
mA
μW
W/A
nm
20
Pf
Optical Output Power from Fiber, IF = Iop, TLD = Tset
Operation Current
10
Iop
125
100
Pth
Threshold Output Power, IF = Ith
η
Quantum Efficiency, CW
0.142
1 530
0.17
ITU-T*1
1
λp
Peak Emission Wavelength, Pf = 10 mW, CW, TLD = Tset
Spectral Line Width, Pf = 10 mW, CW, 3 dB down
Side Mode Suppression Ratio, Pf = 10 mW, under modulation
Input Impedance
1 562
5
Δν
MHz
dB
SMSR
ZIN
RIN
tr /tf
30
35
Ω
25
Relative Intensity Noise, Pf = 10 mW, 20 MHz to 3 GHz
dB/Hz
ps
−140
Rise and Fall Time, 20-80%/80-20%, Tc = 25°C
Input Return Loss, f = 50 MHz to 3 GHz
f = 3 GHz to 6 GHz
120
6
3
S11
dB
BW
DP
Band Width, −3 dB, Pf = 10 mW
Dispersion Penalty, Tc = 25°C*2
GHz
dB
2.5
2.0
Notes:
*1 Available for DWDM wavelengths based on ITU-T recommendation. Please refer to the ORDERING INFORMATION.
*2 2.48832 Gb/s, PRBS 223−1, duty cycle, Extinction Ratio ≥ 8.5 dB, BER = 10−10, NX8563LAS: 1 800 ps/nm(100 km),
NX8563LA: 4 320 ps/nm(240 km)
California Eastern Laboratories
NX8563LA Series
ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: TLD = TSET, TC = -20 to +85°C)
SYMBOL
PARAMETER AND CONDITIONS
Monitor Current, Pf = 10 mW, VR = 5 V
UNIT
MIN
TYP
MAX
Im
ID
μA
nA
dB
100
2 000
10
Dark Current, VR = 5 V
γ*1
Tracking Error, Im = const.
0.6
Note:
Pf
*1 γ = 10 log
10 mW
Pf
(mW)
TLD = Tset, TC = 25˚C
10
Pf
TLD = Tset, TC = –20 to +85˚C
0
Im
Im
(@ Pf (25˚C) = 10 mW)
ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TEC: TLD = TSET, TC = -20 to +85°C)
SYMBOL
PARAMETER AND CONDITIONS
Thermistor Resistance, TLD = 25°C
UNIT
MIN.
TYP.
MAX.
R
B
kΩ
K
9.5
10.0
10.5
3 550
1.2
B Constant
3 350
3 450
IC
Cooler Current, ΔT = 85 − Tset, Pf = 10 mW
Cooler Voltage, ΔT = 85 − Tset, Pf = 10 mW
A
VC
V
2.4
ABSOLUTE MAXIMUM RATINGS1
(TC = 25°C, unless otherwise specified)
SYMBOL
PARAMETER
UNIT
RATINGS
IF
VR
IF
Forward Current of LD
Reverse Voltage of LD
Forward Current of PD
Reverse Voltage of PD
mA
V
300
2.0
10
mA
V
VR
20
Operating Case
Temperature
TC
°C
−20 to +85
Tstg
Tsld
Storage Temperature
Lead Soldering
°C
°C
−40 to +85
260 (10 sec.)
Temperature
Note:
1. Operation in excess of any one of these parameters may result
in permanent damage.
NX8563LA Series
ORDERING INFORMATION
NX8563LA
-
CD : SC-APC
CC : SC-UPC
PART NUMBER
PACKAGE
NX8563LA-AZ*
Hermetically sealed 14-pin butterfly
package
Wavelength Code : Refer to Table A
Without : 240 km (4 320 ps/nm)
S
: 100 km (1 800 ps/nm)
*NOTE:
Please refer to the last page of this data sheet, “Compliance with EU Directives” for Pb-Free RoHS Compliance Infomation.
Table A: DWDM wavelength base on ITU-T recommendations (@ TLD = Tset
)
ITU-T Wavelength*1
(nm)
Frequency
(THz)
ITU-T Wavelength*1
(nm)
Frequency
(THz)
Wavelength Code
Wavelength Code
303
311
318
326
334
342
350
358
366
373
381
389
397
405
1530.33
1531.11
1531.89
1532.68
1533.46
1534.25
1535.03
1535.82
1536.60
1537.39
1538.18
1538.97
1539.76
1540.55
195.90
195.80
195.70
195.60
195.50
195.40
195.30
195.20
195.10
195.00
194.90
194.80
194.70
194.60
509
517
525
533
541
549
557
565
573
581
589
597
606
614
1550.91
1551.72
1552.52
1553.32
1554.13
1554.94
1555.74
1556.55
1557.36
1558.17
1558.98
1559.79
1560.60
1561.41
193.30
193.20
193.10
193.00
192.90
192.80
192.70
192.60
192.50
192.40
192.30
192.20
192.10
192.00
413
421
429
437
445
453
461
469
477
485
493
501
1541.34
1542.14
1542.93
1543.73
1544.52
1545.32
1546.11
1546.91
1547.71
1548.51
1549.31
1550.11
194.50
194.40
194.30
194.20
194.10
194.00
193.90
193.80
193.70
193.60
193.50
193.40
Note:
*1 The value which omitted and computed the 3rd place below the decimal point
NX8563LA Series
PACKAGE DIMENSIONS (Units in mm)
15.24
2.54
TOP VIEW
4– 2.67
φ
#7
#1
20.8
ñ
+
7
8
1
L Thermistor
Cooler
PD
LD
14
R
#8
#14
0.5
PIN CONNECTIONS
20.83±0.25
26.04±0.25
Function
Function
Thermistor
Thermistor
Bias
Pin No.
Pin No.
1
2
3
4
5
6
7
8
9
GND
GND
GND
Optical Fiber (SMF)
Length: 1 000 MIN.
10
11
12
13
14
PD Anode
PD Cathode
Cooler Anode
Cooler Cathode
GND, LD Anode
Signal Input
GND
GND
29.97±0.25
OPTICAL FIBER DIMENSIONS (UNIT: mm)
PARAMETER
Outer Diameter
UNIT
SPECIFICATION
mm
mm
mm
0.9±0.1
30
Minimum Fiber Bending Radius
Fiber Length
1 000 MIN.
35±2 mm
SMF
SC-APC : Cut angle 8°
SC-UPC
Fiber Length: 1 000 mm MIN.
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify
CEL for all damages resulting from such improper use or sale.
12/15/2003
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
-AZ
Lead (Pb)
Mercury
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Not Detected
(*)
Not Detected
Cadmium
Hexavalent Chromium
PBB
Not Detected
Not Detected
Not Detected
Not Detected
PBDE
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
相关型号：
NX8563LA606-CC-AZ
FIBER OPTIC DFB LASER MODULE EMITTER, 1530-1562nm, PANEL MOUNT, BUTTERFLY, SC/UPC CONNECTOR, HERMETICALLY SEALED, PACKAGE-14
RENESAS
NX8563LA606-CD
NECs DIRECTLY MODULATED InGaAsP MQW-DFB LASER DIODE MODULE FOR 2.5 GB/s, 110 KM AND 240 KM REACH DWDM METRO AND CATV APPLICATIONS
CEL
NX8563LA606-CD-AZ
FIBER OPTIC DFB LASER MODULE EMITTER, 1530-1562nm, PANEL MOUNT, BUTTERFLY, SC/APC CONNECTOR, HERMETICALLY SEALED, PACKAGE-14
RENESAS
NX8563LA614-CC
NECs DIRECTLY MODULATED InGaAsP MQW-DFB LASER DIODE MODULE FOR 2.5 GB/s, 110 KM AND 240 KM REACH DWDM METRO AND CATV APPLICATIONS
CEL
NX8563LA614-CC-AZ
FIBER OPTIC DFB LASER MODULE EMITTER, 1530-1562nm, PANEL MOUNT, BUTTERFLY, SC/UPC CONNECTOR, HERMETICALLY SEALED, PACKAGE-14
RENESAS
NX8563LA614-CD
NECs DIRECTLY MODULATED InGaAsP MQW-DFB LASER DIODE MODULE FOR 2.5 GB/s, 110 KM AND 240 KM REACH DWDM METRO AND CATV APPLICATIONS
CEL
NX8563LA614-CD
Laser Diode Module Emitter, 1530nm Min, 1562nm Max, SC/APC Connector, Butterfly, Panel Mount, HERMETICAL SEALED PACKAGE-14
NEC
NX8563LA614-CD-AZ
FIBER OPTIC DFB LASER MODULE EMITTER, 1530-1562nm, PANEL MOUNT, BUTTERFLY, SC/APC CONNECTOR, HERMETICALLY SEALED, PACKAGE-14
RENESAS
NX8563LAS303-CC
NECs DIRECTLY MODULATED InGaAsP MQW-DFB LASER DIODE MODULE FOR 2.5 GB/s, 110 KM AND 240 KM REACH DWDM METRO AND CATV APPLICATIONS
CEL
©2020 ICPDF网 联系我们和版权申明