PS2581AL2-A [CEL]
LONG CREEPAGE HIGH ISOLATION VOLTAGE 4-PIN PHOTOCOUPLER; 长爬电高隔离电压4 -PIN PHOTOCOUPLER![PS2581AL2-A](http://pdffile.icpdf.com/pdf1/p00185/img/icpdf/PS2581_1048015_icpdf.jpg)
型号: | PS2581AL2-A |
厂家: | ![]() |
描述: | LONG CREEPAGE HIGH ISOLATION VOLTAGE 4-PIN PHOTOCOUPLER |
文件: | 总13页 (文件大小:849K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
PHOTOCOUPLER
PS2581AL1,PS2581AL2
LONG CREEPAGE HIGH ISOLATION VOLTAGE
NEPOC Series
4-PIN PHOTOCOUPLER
DESCRIPTION
The PS2581AL1, PS2581AL2 are optically coupled isolators containing a GaAs light emitting diode and an NPN
silicon phototransistor in a plastic DIP (Dual In-line Package) to realize an excellent cost performance.
Creepage distance and clearance of leads are over 8 millimeters.
The PS2581AL2 is lead bending type (Gull-wing) for surface mounting.
FEATURES
•
•
•
•
•
•
Long creepage and clearance distance (8 mm)
High isolation voltage (BV = 5 000 Vr.m.s.)
High-speed switching (tr = 5 s TYP., tf = 7 s TYP.)
Ordering number of tape product: PS2581AL2-E3, E4: 1 000 pcs/reel
Pb-Free product
<R>
Safety standards
•
•
•
•
•
•
•
•
UL approved: No. E72422
CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
BSI approved: No. 8243, 8244
SEMKO approved: No. 900268
NEMKO approved: No. P06206563
DEMKO approved: No. 314846
FIMKO approved: No. FI 24751
DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862
APPLICATIONS
•
•
•
•
Power supply
Telephone/FAX.
FA/OA equipment
Programmable logic controller
Document No. PN10223EJ07V0DS (7th edition)
Date Published May 2009 NS
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS2581AL1,PS2581AL2
PACKAGE DIMENSIONS (UNIT : mm)
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance
Unit (MIN.)
8 mm
Outer Creepage Distance
Inner Creepage Distance
Isolation Thickness
8 mm
4 mm
0.4 mm
2
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
<R>
MARKING EXAMPLE
3
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application
Part Number *1
PS2581AL1
PS2581AL2
PS2581AL1-A
PS2581AL2-A
Pb-Free
Magazine case 100 pcs
Standard products
PS2581AL1
(UL, CSA, BSI, NEMKO, PS2581AL2
PS2581AL2-E3 PS2581AL2-E3-A
PS2581AL2-E4 PS2581AL2-E4-A
Embossed Tape 1 000 pcs/reel SEMKO, DEMKO, FIMKO,
DIN EN60747-5-2
PS2581AL1
PS2581AL2
PS2581AL1-Y-A
PS2581AL2-Y-A
Special version Magazine case 100 pcs
(Pb-Free and
(VDE0884 Part2)
PS2581AL1
PS2581AL2
Approved products)
PS2581AL2-E3 PS2581AL2-Y-E3-A Halogen Free) Embossed Tape 1 000 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Parameter
Symbol
VR
Ratings
Unit
V
Diode
Reverse Voltage
6
30
Forward Current (DC)
Power Dissipation Derating
Power Dissipation
IF
mA
mW/ C
mW
A
PD/ C
PD
1.5
150
Peak Forward Current*1
IFP
0.5
Transistor Collector to Emitter Voltage
Emitter to Collector Voltage
Collector Current
VCEO
VECO
IC
70
V
5
V
30
mA
mW/ C
mW
Vr.m.s.
C
Power Dissipation Delay
Power Dissipation
PC/ C
PC
1.5
150
Isolation Voltage*2
BV
5 000
55 to +100
55 to +150
Operating Ambient Temperature
Storage Temperature
TA
Tstg
C
*1 PW = 100 s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output
Pins 1-2 shorted together, 3-4 shorted together.
4
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter
Symbol
VF
Conditions
MIN.
TYP.
1.2
MAX.
1.4
5
Unit
V
Diode
Forward Voltage
Reverse Current
Terminal Capacitance
IF = 10 mA
VR = 5 V
IR
A
Ct
V = 0 V, f = 1.0 MHz
VCE = 70 V, IF = 0 mA
10
pF
nA
Transistor Collector to Emitter Dark
Current
ICEO
100
400
0.3
Coupled
Current Transfer Ratio
(IC/IF)*1
CTR
IF = 5 mA, VCE = 5 V
IF = 10 mA, IC = 2 mA
50
%
V
Collector Saturation
Voltage
VCE (sat)
0.13
Isolation Resistance
Isolation Capacitance
Rise Time*2
RI-O
CI-O
tr
VI-O = 1.0 kVDC
1011
V = 0 V, f = 1.0 MHz
VCC = 10 V, IC = 2 mA, RL = 100
0.4
3
pF
s
<R>
<R>
Fall Time*2
tf
5
*1 CTR rank
<R>
N :
H :
50 to 400 (%)
80 to 160 (%)
Q : 100 to 200 (%)
W : 130 to 260 (%)
L
:
200 to 400 (%)
*2 Test circuit for switching time
5
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
<R>
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
Remark
The graphs indicate nominal characteristics.
6
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
Remark The graphs indicate nominal characteristics.
7
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
TAPING SPECIFICATIONS (UNIT : mm)
8
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260 C or below (package surface temperature)
• Time of peak reflow temperature
• Time of temperature higher than 220 C
10 seconds or less
60 seconds or less
• Time to preheat temperature from 120 to 180 C 120 30 s
• Number of reflows
• Flux
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(2) Wave soldering
• Temperature
• Time
260 C or below (molten solder temperature)
10 seconds or less
• Preheating conditions
• Number of times
• Flux
120 C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
• Time (each pins)
350 C or below
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 C.
9
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially
below IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the
like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
10
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
<R>
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Spec.
Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1)
55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 UIORM, Pd 5 pC
UIORM
Upr
1 130
1 695
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM, Pd 5 pC
Upr
1 669
Vpeak
Vpeak
Highest permissible overvoltage
UTR
8 000
2
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11))
Material group (DIN EN 60664-1 VDE0110 Part 1)
Storage temperature range
CTI
175
III a
Tstg
TA
–55 to +150
–55 to +100
°C
°C
Operating temperature range
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25 C
Ris MIN.
Ris MIN.
1012
1011
VIO = 500 V dc at TA MAX. at least 100 C
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Tsi
Isi
175
400
700
C
mA
mW
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
Psi
VIO = 500 V dc at TA = Tsi
Ris MIN.
109
11
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
12
Data Sheet PN10223EJ07V0DS
PS2581AL1,PS2581AL2
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-A-_1320556_files/PS2581AL2-A-_1320556_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-A-_1320556_files/PS2581AL2-A-_1320556_2.jpg)
PS2581AL2-A-H
Transistor Output Optocoupler, 1-Element, 5000V Isolation, LEAD FREE, PLASTIC, SURFACE MOUNT PACKAGE-4
NEC
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-E3_1320553_files/PS2581AL2-E3_1320553_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-E3_1320553_files/PS2581AL2-E3_1320553_2.jpg)
PS2581AL2-A-L
Transistor Output Optocoupler, 1-Element, 5000V Isolation, LEAD FREE, SURFACE MOUNT, PLASTIC PACKAGE-4
NEC
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-Y-_1320554_files/PS2581AL2-Y-_1320554_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-Y-_1320554_files/PS2581AL2-Y-_1320554_2.jpg)
PS2581AL2-A-L
1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, LEAD FREE, SURFACE MOUNT, PLASTIC PACKAGE-4
RENESAS
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-E3_1320553_files/PS2581AL2-E3_1320553_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-E3_1320553_files/PS2581AL2-E3_1320553_2.jpg)
PS2581AL2-A-N
Transistor Output Optocoupler, 1-Element, 5000V Isolation, LEAD FREE, SURFACE MOUNT, PLASTIC PACKAGE-4
NEC
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-Y-_1320554_files/PS2581AL2-Y-_1320554_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-Y-_1320554_files/PS2581AL2-Y-_1320554_2.jpg)
PS2581AL2-A-Q
1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, LEAD FREE, SURFACE MOUNT, PLASTIC PACKAGE-4
RENESAS
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-A-_1320556_files/PS2581AL2-A-_1320556_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-A-_1320556_files/PS2581AL2-A-_1320556_2.jpg)
PS2581AL2-A-Q
Transistor Output Optocoupler, 1-Element, 5000V Isolation, LEAD FREE, PLASTIC, SURFACE MOUNT PACKAGE-4
NEC
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-Y-_1320554_files/PS2581AL2-Y-_1320554_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-Y-_1320554_files/PS2581AL2-Y-_1320554_2.jpg)
PS2581AL2-A-W
1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, LEAD FREE, SURFACE MOUNT, PLASTIC PACKAGE-4
RENESAS
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-A-_1320556_files/PS2581AL2-A-_1320556_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-A-_1320556_files/PS2581AL2-A-_1320556_2.jpg)
PS2581AL2-A-W
Transistor Output Optocoupler, 1-Element, 5000V Isolation, LEAD FREE, PLASTIC, SURFACE MOUNT PACKAGE-4
NEC
![](http://pdffile.icpdf.com/pdf2/p00256/img/page/PS2581AL2-E3_1551717_files/PS2581AL2-E3_1551717_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00256/img/page/PS2581AL2-E3_1551717_files/PS2581AL2-E3_1551717_2.jpg)
PS2581AL2-E3
Transistor Output Optocoupler, 1-Element, 5000V Isolation, SURFACE MOUNT, PLASTIC PACKAGE-4
NEC
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-E3_1320553_files/PS2581AL2-E3_1320553_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00225/img/page/PS2581AL2-E3_1320553_files/PS2581AL2-E3_1320553_2.jpg)
PS2581AL2-E3-A-H
Transistor Output Optocoupler, 1-Element, 5000V Isolation, LEAD FREE, PLASTIC, SURFACE MOUNT, DIP-4
NEC
©2020 ICPDF网 联系我们和版权申明